Virtual principal

Similar Questions

• 'Lack of installation files' then install LabVIEW 2014 (Win7-64 on a VMWare system)

  Hello

  I try to install LabVIEW 2014 on a VMWare Windows 7 - 64-bit environment, with no luck.

  3-DVD installation media has been downloaded from NI.com, the release of August 2014 of the Site license academic (ASL), which my company is a regular subscriber, a very long time.

  (Interestingly enough, this same virtual system has fonctionnee LV 2012 without any problem whatsoever)

  Here are the steps I followed:

  -unzip the 3 iso files on separate directories on drive virtual, principal of this system;

  -Run setup.exe on the first directory (IE one that contains 1 DVD files)

  -Enter the serial number of the FSA

  -l' Installer leaves just selected default English 2014 LabVIEW and the Manager of Package of VI, so I expand the ASL Core Software to add NIDAQmx 2014, and I also selects the device drivers OR - August 2014

  -J' I accept different license agreements

  -I select "I am not the end user" to postpone activation

  Setup continues but almost immediately alerts telling me that it was impossible to install "NI Customer Experience Improvement Program", Yes , I want to keep and then I see a system dialog box display of files/paths that do not actually exist on the directory DVD 1, hence the obvious error 'lack the installation files"message. If I ignore this message, several other similar dialog boxes appear.

  Either by the way, I've done various research, but, right now, apparently not a popular question at all.

  Any advice?

  Problem solved.

  For some weird reason, WinRAR do NOT extract some files from the first archive .iso (but more importantly, she also didn't show absolutely no error message, leading me to believe everything was fine).

  When any further inspection, I found about it and made extraction .iso process everything again and this time to the installation program completed without fault.

• MD3000 cannot change virtual disk ownership / preffered path - ERROR 29

  Current configuration

  PowerVault MD3000 (deleted by the moderator) - attached to two servers PowerEdge R610 using Dell SAS 5/e card in each r610. The R610s act as a host ESX VMWare ESXi 5.5.0

  We have created multiple LUNS on the storage array and noticed that traffice all happening through a RAID controller or another module (and it seems to me not change without prompting when you look at the storage Bay). I turned off a two different virtual machines to try to change the path and had an error with a certain delay - I stuck this error below. I also tried to redistribute virtual disks tab the MDSM software nothing works support.

  By reading, it seems that the LUN should be attributed to a particular raid controller before all I / 0, but I still feel like're missing us something as to why we cannot distribute the traffic properly.

  According to some records for a MD3200 -.

  "If the host has a path of data unique to the MD, the virtual disk storage array.
  must be owned by the controller to which the host is connected.
  That's what we're trying to accomplish. I don't know if the hosts are to be physically detached from the SAN, or if there is a bit of software to fail us.
  Thank you in advance! If I failed to provide all the details, please let me know and I'll try to gather the information.
  Here's the error output:

  OPERATING ENVIRONMENT DATA

  Name of the client system: FLMGMT01
  Client OS: Windows Server 2008 R2

  Application version: 03.35.G6.88
  Storage management of version table: 03.35.G6.88
  Name of storage array: VAB-NAS-01
  Firmware version: 07.35.39.64
  Management class: devmgr.v1035api01.Manager

  **************************************************

  DATA ERROR

  Command sent to the RAID controller module to the location: 0
  Host name: 192.168.19.233
  IP address: 192.168.19.233

  Return code: error 29 - this operation cannot complete because there was a failure of authentication of security on a parameter in the command sent to the RAID controller module.

  Try the operation again. If this message persists, contact your Technical Support representative.
  Operation when the error occurred: PROC_assignVolumeOwnership
  Timestamp: August 25, 2014 16:18:59

  DATA BATTERY

  devmgr.v1035api01.Sam.JAL.ManagementOperationFailedException:
  at devmgr.v1035api01.sam.jal.SYMbolClient.dispatchOperation (unknown Source)
  at devmgr.v1035api01.sam.jal.StorageArrayFacade.issueCommand (unknown Source)
  at devmgr.v1035api01.sam.jal.StorageArrayFacade.sendCommandCommon (unknown Source)
  at devmgr.v1035api01.sam.jal.StorageArrayFacade.sendCommand (unknown Source)
  at devmgr.v1035api01.sam.jal.StorageArrayFacade.assignVolumeOwnership (unknown Source)
  at devmgr.v1035api01.sam.configuration.controller.ChangeControllerOwnershipDialogPanel.performCommitAction (unknown Source)
  to devmgr.v1035api01.shared.wizard.DialogPanel$ NotifyBackgroundTaskAdapter.performOp (unknown Source)
  at devmgr.v1035api01.shared.AbstractTaskAdapter.run (unknown Source)

  THREAD DATA

  Thread [reference Manager 10, System]
  Thread [finalizer, 8, System]
  Thread [dispatcher Signal, 9, System]
  Thread [attach auditor, 5, System]
  Thread [Java2D grinder, 10, System]
  Thread [TimerQueue, 5, System]
  Thread [Swing-Shell, 6, System]
  Thread [AWT-closure, 5, main]
  Thread [AWT-Windows, 6, main]
  Thread [EventQueueMonitor-ComponentEvtDispatch, 5, main]
  Thread [Thread-3, 5, main]
  Thread [AWT-EventQueue-0, 6, main]
  Thread [DestroyJavaVM, 5, main]
  Thread [SwingWorker-pool-2-wire-1, 5, main]
  Thread [ChangeDetector, 6, main]
  Thread [PreferenceStoreChangeDetector, 6, main]
  Thread [LogMsgThread, 6, main]
  Thread [Np_Link_Monitor0, 6, main]
  Thread [DMVGarbageCollectorThread, 6, main]
  Thread [RecoveryProfile-27, 6, main]
  Thread [NEA-28, 6, main]
  Thread [RecoveryProfile-30, 6, main]
  Thread [NEA-31, 6, main]
  Thread [Timer 0, 6, main]
  Thread [RecoveryProfile-35, 6, main]
  Thread [NEA-36, 6, main]
  Thread [RecoveryProfile-38, 6, main]
  Thread [NEA-39, 6, main]
  Thread [Timer 1, 6, main]
  Thread [Timer 2, 6, main]
  Thread [Timer-3 6, main]

  
  Thread [RecoveryProfile-48, 6, main]
  Thread [NEA-49, 6, main]
  Thread [Timer-4 6, main]
  Thread [RecoveryProfile-53, 6, main]
  Thread [NEA-54, 6, main]
  Thread [Timer-5 6, main]
  Thread [SwingWorker-pool-2-wire-2, 5, main]
  Thread [RecoveryProfile-69, 6, main]
  Thread [NEA-70, 6, main]
  Thread [Timer-14, 6, main]
  Thread [Timer-91, 6, main]
  Thread [host 2.3, principal of the Image]

  Hello MrRedPants,

  Since you are using a configuration not redundant you will have problems trying to modify the paths between the controllers since the two hosts have only a single connection to the MD3000.  What you could do if possible is to get 2 more SAS cables & connect ports second on the MD to RAID opposite that the host is currently connected to.

  Now, if this isn't an option so that you can make is to have 2 disk groups and assign the virtual disks / LUNS that are connected to each host in their own disk group.  If you go to each host their own groups of disks, then you will need to stop the e/s as you move the Ramdisk to the new group of disks so that you want to discard any data loss.

  Please let us know if you have any other questions.

• Setting permissions on a virtual machine

  We run a VM hosting service. I wrote scripts to create, delete, and update virtual machines. The problem I have is setting permissions on a virtual machine. We have groups Active Directory (AD) for the management of the permissions on the virtual machines. I am able to manually add these ad groups tab permissions on a virtual machine using the vCenter console, but I could not describe the process. We run 5.0 vCenter. Any help would be greatly appreciated!

  Hi B

  Assuming that you do not have many ads with replication issues Sites / ore something latency... maybe this could be a problem:

  In my script I user QAD Cmdlets... as I wrote this powershell script was without value 'default' - module

  It might be the QAD Cmdlets to return the other default strings them from Microsoft.

  I suggest you play with this line in order to get a response... I'm not able to test this now... excuse... :

  $perm.principal = $mrdgrp

  # Does 'primary' eventualy implies PrincipalName? Something like:

  $perm.principal = ' VMCA_group_name@C***. EDU'

  # Or second try...

  "$perm.principal = ' C * \VMCA_group_name.

• Transfer of virtual machines for a backend of the DG

  Environment: 11r2 RHE Linux 5.8 host, running on a VMware VM.
  
  My VMware admins need to move the main VM1 to VM3 Oracle server. This primary has 2 data associated with guard rescue on 2 servers different VMs.
  
  "In theory", there will be no problem spending the principal server a virtual computer to another (other systems, such as Windows, seem to have no downtime when this happens). "In theory" this transfer will take less than a minute (it does with Windows servers). I'm guessing that RHEL and Oracle may not be so forgiving.
  
  One of you gurus out there have knowledge/experience about it? If so, is there a list of the steps I have to take beforehand? The traps to monitor?

  Thanks for the reply. With the great terror in my heart, I did experience today in the name of SCIENCE.

  The Oracle server of above-mentioned production (a guardian of primary data feed to 2 gap) and a separate Watch (whose primary is an Oracle instance of different production on another virtual machine), both have been migrated in an active State to a separate virtual computer.

  Verdict: there no noticeable change in performance, without errors, etc.

• How to add the AD security group in each virtual machine with a name corresponding in VCenter?

  Hi all

  I would like to know if it is possible with VMware PowerCLI v4.1, I created the universal security group called 'Local administrators on %ComputerName%' for each server I have in UO computers by location OR separate and that he manually add members of the Local, but I want to attribute this security group in each computer virtual with the same name if possible.

  Basically, it's something like this:

  In the ad, here are computer objects:
  DOMAIN.com/Computers/ mailserver1-VM
  DOMAIN.com/Computers/ DBServer1-VM
  DOMAIN.com/Computers/ ApplicationServer1-VM

  In the ad's local security group objects:
  DOMAIN.com/SecureProductionOU/ 'Administrator locally on mailserver1-VM'
  DOMAIN.com/SecureProductionOU/ 'Local on DBServer1-VM administrator.
  DOMAIN.com/SecureProductionOU/ 'Local on ApplicationServer1-VM administrator.

  So I want to affect these security group in each respective name of VMS in VCenter:

  VCenter01.domain.com
  Datacenter1
  HighPerformanceCluster1
  Mailserver1-VM - Local Administrator on mailserver1-VM - role: read-only
  DBServer1-VM - Local Administrator on DBServer1-VM - role: read-only
  ApplicationServer1-VM - Local Administrator on ApplicationServer1-VM - role: read-only

  Any kind of aid and assistance would be appreciated grgeatly.

  Thank you.

  Hi Albert,

  I don't know what you want to check exactly, so I give 2 possible solutions.

  (1) you have a fixed number of names known to virtual machines for which you want to add this permission.

  $targetVM = "MailServer1-VM","DBServer1-VM","ApplicationServer1-VM"
  
  Get-Cluster -Name HighPerformanceCluster1 | Get-VM | `    where {$targetVM -contains $_.Name} | %{    New-VIPermission -Entity $_ -Principal ("DOMAIN\Local Administrator on " + $_.Name) `       -Role (Get-VIRole -Name ReadOnly) -Confirm:$false   }
  

  (2) you want to check for each virtual computer if the security group exist and then add the authorization.

  Get-Cluster -Name HighPerformanceCluster1 | Get-VM | `    Where{Get-QADObject ("DOMAIN\Local Administrator on " + $_.Name) `        -DontUseDefaultIncludedProperties -WarningAction SilentlyContinue `        -ErrorAction SilentlyContinue -SizeLimit 1} | %{    New-VIPermission -Entity $_ -Principal ("DOMAIN\Local Administrator on " + $_.Name) `        -Role (Get-VIRole -Name ReadOnly) -Confirm:$false} 
  

  Note that this requires the Quest AD snap-in must be installed. If you have a version without the Quest AD snap let me know.

• Virtual infrastructure HA

  Salve,
  all'interno della mia internationalist stiamo implementazione di una virtual infrastructure, Vmware hypervisor con prevedendo, che personal Alta Affidabilita, Vmotion, como principi cardine fault tolerance.

  The sara cosi Architettura composed:

  Nr.2 gia ns server. possesso, con processore Xeon E54XX, equipaggiati con due schede iscsi each, sas 10 k 2.5 "hd;

  Nr.1, da server acquistare, con processore Xeon E56XX, equipaggiato con due schede iscsi, hd 15 k sas 3.5 ";

  Nr.1 storage iscsi controller double da acquistare (fujitsu dx60, dx80 oppure ibm ds3512) knew cui andare a collegare I have server in direct attach (especially nel caso di dx80 o ibm ds3512 che hanno 8 door iscsi)

  VMware Vsphere essential more o probabilmente Vsphere Advanced (per sfruttare it fault tolerance)

  I like to share con voi personal seguenti:

  (1) Ho appreso che e best practice proven architecture hardware dei nodi Server quanto più faux per avere una effective virtual infrastructure. Avere una sostanziale difference nei processori (E54XX ed E56XX) e negli interni AI Server (2.5 "e 3.5") Può published a problema serio di drive performance hard ed affidabilita?

  
  (2) Greece di outdo tra Server e sara 1.0 Gb/s ISCSI storage. como posso sapere e understand is questo non costituira UN collo di bottiglia all'infrastruttura works che questa supportera UN total di 8 Server virtuali per servizi di exchange 2007, sql, file server, dc, dns by a total di 40 users?

  Grazie.

  Ciao,.

  'a level is di principio' any switch e sufficiente, my be we want essere corretti, no..

  TRA him varies features che dovresti links nello choose a product of io annovererei:

  -full wire speed/non-blocking: name diversi usano termini diversi in no. e dello switch guarantee the contemporanea Velocità massima di su ability all the door

  -supporto by vlan tagging, to the usi Reed knew ESX e switch so you can use the same storage with iscsi

  -supporto per jumbo frames

  Altre funzioni sound very gradite is presenti ma no obbligatorie.

  Inizierei ad annoverare the door 10 Gbit o at least wear gbic by prevedere one ' expansion futura, oramaci if sta iniziando a spread.

  Ciao,.

  Luca.

  --
  Luca Dell'Oca
  http://www.vuemuer.it
  [Assegnare punti a useful risposta e una a modo di say thank you]

• CLI can be used to assign AD accounts to virtual machines

  Hi, I am interested in the possibility to use the CLI to assign accounts Active Directory for VMs. currently there are 10 virtual machines created from a template and there are 22:00. 1 AD account is assigned to each of the virtual machines. They are used for training purposes. Virtual machines are then removed and repeat the procedure. Is it possible that I can attribute the AD account name to a particular virtual machine using the command line?

  Thank you

  You can use the new-vipermission to assign permissions to a virtual machine.

  new-vipermission -entity (get-vm SQL04) -principal "Mishchenko\dave.mishchenko" -Role "Admin"
  

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• HA failover when the principal server is available again

  How HS does not have a situation where the primary server disconnects for some reason of standard equipment such as the failure of the SUPPLY, the rocking AP and to restart the virtual machines on the secondary server and then set you the primary server online.

  The principal server then put to update its configuration of the cluster HA and now show as having no VMs and high school have all virtual machines?  It is a simple process and then manually balance the virtual machines again back on the backend as they were before the failure?

  Thanks for the help on this subject, busy reading place on that and not have not yet found this bit.

  See you soon

  Kyle

  Process:

  -Host A dies with assosiated VMs

  -Host B restarts VMs... View in vCenter is updated by VC agent on host B

  -Host A turns and DRS provided by VC will start to migrate servers turn it on again to Host A function of load running on host B and configured rules.

  In a HA cluster 5 primary hosts may exist... (default hosts the first 5 added to the cluster), others are secondary...  PRIM / s roles are configured by VC when activating HA, in / out of the mode of maintenance etc.

  Hope this short description helps...

  / Rubeck

• What App would you recommend to run virtual machines on an Imac?

  I would try to have virtual machines running on my IMac, but I'm having a hard time finding any material on this topic from apple.

  Ideally, I would like to my main x os to start and then simply turn a small virtual machines or containers from OSX.

  Any recommendations? or articles about the support of Apple for such a thing?

  There are three choices:

  Parallels Desktop for Mac

  VM fusion

  VirtualBox

  The first two are commercial products. The third is a free, open source. Three Parallels is the best.

• Kernal_task with virtual memory, slow computer

  I have an iMac 21.5 inch end 2013 with 8 GB RAM on OS X 10.11.6. The computer is incredibly slow and hangs up during long periods of time (minutes). In addition, I noticed when you save to my Time Capsule (ethernet connection, wifi is turned off) it will just make a break to half way through and stay there (e.g., 789 MB 450MO) for 30-45 min. activity monitor shows kernal_task taking up huge amounts of time processor (5:02:09), son (118), slow down wake ups (2752), and when I select the process name it shows the size of real but 781,2 MB of memory the size of the virtual memory of 70,51 Go.

  I don't have any external monitors, hard drives (except the time capsule), etc. connected. Any ideas of what I can do?

  Thank you!

  Please after the release of EtreCheck

  <https://discussions.apple.com/docs/DOC-6174> or <http://etrecheck.com>

• Virtual keyboard

  HELLO, since two updates ago on my iPad virtual keyboard appears like a thumb moved over the lower part, and I was not able to fix it. She creates problems to be able to see what you write in Facebook, emails, etc.

  Anyone experienced the same problem or knows how to solve this problem?

  Thank you very much.

  Hold down the key on the keyboard icon in the lower right corner, and then drag your finger to select Dock.

  Settings > general > keyboard > keyboard Split > Off disables this feature.

• Virtual pc for iPad

  Y at - it Virtual PC to iPad?

  N °

• How do you manage virtual interfaces for Macbbok

  How do you manage virtual faces for macbook pro?

  I guess that you are referring to the virtual faces on a network?

  System Preferences > network > gear icon > manage virtual faces

• APPLE SSD SM0512F configuration - 499gig virtual disk?

  I was wondering if it is a normal Setup for an APPLE SSD SM0512F found at the end of 2013 Macbook pro retinas

  I was wondering why "disk1" is virtual. Its capacity is 499gigs, it is the last element in the output of the terminal.

  Thank you!

  see you soon

  JB

  Here is the output of the terminal of ' diskutil info - all the»

  Jack: ~ info jackbaker$ diskutil-all

  Identifier of the instrument: disk0

  Device node: / dev/disk0

  Overall: Yes

  Part of the whole: disk0

  Device / media name: APPLE SSD SM0512F

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Content (IOContent): GUID_partition_scheme

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Total size: 500,3 GB (500277790720 Bytes) (exactly 977105060 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Virtual: No.

  OS 9 drivers: No.

  Low Level Format: unsupported

  **********

  Identifier of the instrument: disk0s1

  Device node: / dev/disk0s1

  Set: No.

  Part of the whole: disk0

  Device / media name: EFI System Partition

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Partition type: EFI

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID:

  Disk / Partition UUID:

  Total size: 209,7 MB (209715200 bytes) (exactly 409600 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  **********

  Identifier of the instrument: disk0s2

  Device node: / dev/disk0s2

  Set: No.

  Part of the whole: disk0

  Device / media name: MacintoshHD

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Partition type: Apple_CoreStorage

  Operating system can be installed: No.

  Recovery disk: disk0s3

  Media type: generic

  Protocol: PCI

  Smart: checked

  Disk / Partition UUID:

  Total size: 499,4 GB (499418030080 Bytes) (exactly 975425840 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  This disc is a physical storage Volume (PV) Core.  Basic information from storage:

  PV UUID:

  LVG UUID:

  **********

  Identifier of the instrument: disk0s3

  Device node: / dev/disk0s3

  Set: No.

  Part of the whole: disk0

  Device / media name: Recovery HD

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Partition type: Apple_Boot

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID:

  Disk / Partition UUID:

  Total size: 650.0 MB (650006528 bytes) (exactly 1269544 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  **********

  The instrument identifier: disk1

  Device node: / dev/disk1

  Overall: Yes

  Part of the whole: disk1

  Device / media name: APPLE SSD SM0512F

  Volume name: MacintoshHD

  Gendarmerie: Yes

  Mount point: /.

  Personality of file system: HFS journaling +.

  Type (Bundle): hfs

  Name (Visible to the user): Mac OS extended (journaled)

  Journal: Journal size 40960 KB at the offset 0xe8f000

  Owners: enabled

  Content (IOContent): Apple_HFS

  Operating system can be installed: Yes

  Recovery disk: disk0s3

  Media type: generic

  Protocol: PCI

  The SMART State: Not supported

  Volume UUID:

  Disk / Partition UUID:

  Total size: 499,0 GB (499046809600 Bytes) (exactly 974700800 512-Byte-units)

  Amount of free space: 26.5 GB (26546237440 Bytes) (exactly 51848120 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: No.

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Virtual: Yes

  OS 9 drivers: No.

  Low Level Format: unsupported

  This disk is a storage Logical Volume (LV) Core.  Basic information from storage:

  LV UUID:

  LVF UUID:

  LVG UUID:

  Fusion drive: No.

  Encrypted: No.

  **********

  Jack: ~ jackbaker$

  This is the storage system report tab.

  MacintoshHD:

  Available: 26,83 GB (26,825,244,672 bytes)

  Capacity: 499,05 GB (499,046,809,600 bytes)

  Mount point: /.

  File system: HFS journaling +.

  BSD name: disk1

  Logical volumes:

  Reversible: Yes (no required decryption)

  Encrypted: No.

  Logical volume group:

  Name: MacintoshHD

  Size: 499,42 GB (499,418,030,080 bytes)

  Free space: 18.9 MB (18,898,944 bytes)

  Physical volumes:

  disk0s2:

  Device name: APPLE SSD SM0512F

  Name of the media: APPLE SSD SM0512F media

  Size: 499,42 GB (499,418,030,080 bytes)

  Media type: SSD

  Protocol: PCI

  Internal: Yes

  Partition map type: GPT (GUID Partition Table)

  Status: online

  S.M.A.R.T. Status: verified

  28 August at 16:00:19 MacBook-Pro configd [112]: [bootp_transmit.c:213] bootp_transmit(): bpf_write (en0) failed: network is down (50)