Virtual XP mode - DVD drive gone!

I just install Windows Virtual PC to use Windows XP on my new Windows 7 (64-bit) Professional PC, aften restart that my DVD drive is no longer seen.  Was working fine before installing Virtual PC, but now it is absent.  The BIOS it even longer recognizes.

Hello

Method 1:

I suggest you run the fix it tool and check.

Hardware devices do not work or are not detected in Windows FIX IT:

http://support.Microsoft.com/mats/hardware_device_problems

Method 2:

I suggest you to see link and check.

Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756

(http://support.microsoft.com/kb/322756/)

How to back up and restore the registry in Windows

Your CD or DVD drive is missing or is not recognized by Windows or other programs

http://support.Microsoft.com/kb/314060

Tags: Windows

Similar Questions

  • Windows 7 professional XP Mode - does not recognize external USB drives or internal DVD drive

    I recently bought a new Toshiba laptop and ordered computer configured with Windows 7 Professional that I can use the XP mode for some older programs.  Virtual Mode and XP mode work well, but the computer will not recognize the USB external storage drives or internal DVD player.  This prevent me to save and transfer any file I'm working on in XP mode.  Anyone know what I have to do to make the computer recognize USB drives and DVD drive internal when I'm running in XP mode?  Thank you!!

    Hello David,.

    Thanks for the quick response.

    Yes, it's a Microsoft Product, but there specific departments assigned to the people where they have more expertise, this is the reason why we have asked you to post your query in the TechNet where this issue is very discussed.

    Hope this information helps.

  • Software installation of virtual CD/DVD drive?

    I can't be able to install a piece of software from the virtual CD/DVD drive.  I had set it to auto-detection, but in the VM of Windows 98 if I type D:\setup.exe which exists as E:\setup.exe actually (E is mapped to D :) I can't get the installer to launch.  What should I do?

    Try to read the host and if it works, create an .iso of it. Attach the file image .iso at the prompt, then.

    AWo

    VCP 3 & 4

    Author @ vmwire.net

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

  • CD/DVD drive not recognized inside the virtual machine

    No matter what I do, I can't get my VM (XP) to recognize the CD/DVD drive. I am running version 2.0.6 of merger and under Mac OS X (10.5.8) on a MacBook Pro. I did a right click on the CD icon in the lower right corner of the computer virtual window, then select 'connect' CD/DVD - I see while the disc turns black (which indicates it's supposed to be connected). I launch Windows Explorer in my virtual machine, but I do not see the CD/DVD drive listed anywhere! Help, please. I have the VM settings to connect to the physical CD/DVD (DVD-R MATSHITA UJ-875) drive. Thanks in advance.

    Take a look at: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs

  • My CD/DVD drive does not appear as a drive on your computer with other readers. All points of restoration before March 1 are gone. How can I fix it?

    I have windows vista Home premium OS on a Dell Inspiron 530.  Some time previously, autorun would not work, but I could open the program manually.  Who has also disappeared.  The drivers are later and Device Manager shows the drive works properly.

    I also have a problem importing pictures from my camera even though I reinstalled the whole program.  When I try to download, I get a screen showing the camera as a storage device.  No way to get around.

    All points before March 1 of restoration, have disappeared.

    I've used RegZooka.  If I have damaged registry, how can I restore it?  If I open REGEDIT it opens directly onto the CD/DVD key.

    Help!

    Ron

    Hello

    1. What is the brand and model of the camera?

    2. you are trying to transfer pictures from the camera to the computer?

    3. are you an error message when you transfer the data?

    Please follow the steps below.

    Method 1:

    Follow the steps from the link below.

    NOTE: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756/

    How to back up and restore the registry in Windows

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/314060

    Method 2:

    Follow the steps from the link below.

    How can I get pictures from my camera to my computer?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

    I suggest also refer to the manual of the camera to transfer photos.

     

    Method 3:

    Run the tool from the link below System File Checker.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • Laptop does not detect the DVD drive, the .sys files deleted

    Hi I have an acer aspire laptop 4752-6861, there his factory DVD player, here are the details of the DVD player:

    --------------------------------------------------------------------------------
    SlimType DVD A DS8A5SH ATA Device
    UNKNOWN media type
    SlimType DVD to name a DS8A5SH ATA Device
    Availability during the performance/power
    Direct access to the features, removable media
    Configuration Manager User Config FALSE
    DriveIntegrity TRUE
    Media loaded FALSE
    State error
    10462 KB/S transfer rate
    --------------------------------------------------------------------------------
    NOTE: (I use speccy software for more information)
    A few days ago I had created a virtual drive but could not manage to remove it later, so I tried to delete his
    the files that were the .sys files, after deleting these files he had not yet gone, but just today, I noticed when I clicked on computer, the D:
    drive was not showing (from the DVD) IV ' e tried install and reinstallin, deactivation, activation and reboot but no luck.
    in Device Manager it gives me this error status:
    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    well I guess it has something to do with these .sys files that I deleted, I do not remember where the files were nore can
    I get back them, is possible to reinstall drivers or something, thanks in advanced for any ideas.   :)

    Hello

    This can be happen due to upper and lower case system registry settings.

    http://support.Microsoft.com/kb/894730

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/my-computer-cannot-detect-my-DVD-drive-in-Windows/3e232ab4-1a4c-425d-96DC-4f4dac074c60

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-required-CDDVD-drive-device-driver-is-missing/51ecd2ed-b678-E011-9b4b-68b599b31bf5

    http://support.Microsoft.com/kb/314060

  • Boot camp with external dvd drive

    How it is possible to install Windows 7 on my old MacBook Pro Mid 2009 using an external DVD drive?

    Because my SuperDrive drive is broken.

    Yes, there is a way, I remember that when I swapped my Superdrive for a disk hard while my old Macbook could not start Windows USB.

    you need vmware Fusion and refined installed

    It's a little tricky because not apple USB drives do not work when booting the operating system, but it works if you read carefully. basically the process starts as usual, put the DVD in the DVD USB drive and start to Boot Camp, let to create the BootCamp partition, instead of restarting create a VM with the mapping of physical disk, begin the installation, restart Windows and finish using DVD USB.

    Here is the guide, a bit outdated but might help. Be sure just to what disk you format in the virtual machine, because you are working with the physical disk where you have installed OS X:

    http://www.andrewsavory.com/blog/2011/2156

  • Satellite L40 - CD/DVD drive does not end to close after burning

    Hello

    My TOSHIBA SATELLITE L40 works correctly under VISTA HOME PREMIUM. This is the first time that I realize that the CD/DVD driver is unable to complete a session of engraving using NERO8, NERO9, ASHAMPO TSHIBA DISC CREATOR or in Windows mode. The burn starts fine from 0% to 100% where it remains for a long time. Where can be the problem come from? Is the driver broken only for burning?

    It correctly reads all CDs and DVDs once loaded.

    Thank you!
    [email protected]

    Hello

    I think that this problem can be caused by using fully compatible diskettes
    I had many problems with different CD or DVD from different manufacturers.
    I tested several brands and finally I had a good experience with TDK discs Verbatim R my disk manages this disc better than others

    Perhaps, you should also test different drives from different manufacturers.

  • Satellite L305-S5919 - Question about CD/DVD drive acoustic silencer

    Anyone know if it is possible to make the default CD/DVD Drive Acoustic silencer silent mode whenever I put a disc in the drive?

    Now, the icon appears in the taskbar and it takes only a few clicks, but it would be nice if I could just leave all the time. My version of the acoustic silencer is 32-bit, Windows Vista and Satellite L305-S5919 2.02.03.

    Appreciate any suggestions.

    Hi pdun459,.

    You must read and inform you on acoustic silencers ;)

    If you open the program, you will see the following:
    + ATTENTION: The speed of the drive will return to normal speed if you restart or out of standby or hibernation. These settings can also be changed by other applications. +

  • DVD drive does not appear on the screen of the reader 'computer '.

    I lost access to the DVD drive. It does not appear on the screen of the reader 'computer '.
    It starts with a disc inserted, but stops after about 20 seconds without opening all files.
    The DVD comes on when it starts first and then turns off after a few seconds.
    I have re-installed the driver of Toshiba and still no access.

    I think it all started when I installed a new WD 1 TB external hard drive which its virtual CD drive on the E: drive, which was used by the installation DVD player. I moved the external hard drive G: and drive E: letter has left vacant, but still does not work.

    Any ideas how I can fix this problem? It would be greatly appreciated.

    Optical disc drive is listed correctly in the Device Manager?

  • Satellite Pro A100 - CD/DVD drive is not listed in the Manager of peripherals and BIOS

    Can Hi anyone tell me what is wrong with this laptop?

    The problem is im using my DVD - ROM drive and it stops working. I went into Device Manager and it wasn't there and it was not in my list of drives. I went and checked the BIOS, it is not listed there either and the BIOS pick up all get them is check the cable or the conection.

    Would be grateful if some knows what happened or if my hard drive is gone.

    Thank you

    Hello

    If the CD/DVD drive is not listed in the Device Manager and BIOS, it seems to be defective and must be replaced.
    What do you think about this?

    You can exchange the car yourself. Check for a compatible CD/DVD Player user manual or go to an authorized service provider. Technicians can order a new drive to swap.

    Sorry, but if the drive is not listed in the BIOS seems to be defective.

    Good bye

  • Satellite L50D-B - faulty DVD drive does not recognize discs

    Bought 2 months ago. The reader agrees not the CD, DVD or anything like that.
    The name of the drive does not appear on the disc and if you double click on the DVD drive icon (even if a disc is inserted) the drawer opens and says please insert a disk. I tried several discs are not the issue.

    So far I got technical support where I bought it.
    They said to do a reinstall I did - with the full drive clean. I tried to update the drivers, but the computer insists on the fact that they are later. If I search my model number on the site of Toshiba driver support he gets rejected, and I have no access to (Toshiba) drivers.

    I checked a few other forums and tried the regedit fix, but which is also irrelevant. If no solution is found (and I've lost hours of my life on this subject) then this laptop is going back for a refund and I'll get one who will perform the simple task of playing a DVD.

    Windows 8.1
    PSKUQA - 01300-S

    Hello

    Sorry to hear that you have such a stupid problem with your machine. On this virtual path, it is not easy to say what the problem is here.
    In my opinion you should not waste your time checking and search for some drivers who probably will not help at all.

    Reinstall the original operating system that you have with your machine and test functionality with the factory settings. If the result is the same contact your reseller or Toshiba service provider directly and ask for help. They can check ODD and Exchange if necessary.

  • Equium L20-197: Problems with CD/DVD Drive Acoustic Silencer?

    Hey there...

    Recently, I used the small button of software called "CD/DVD Drive Acoustic Silencer" to calm the CD player while a CD is playing.

    Before that, a DVD would play well... now... a wil DVD stutter, it is in ANY player. WinDVD5, Windows Media etc... I clicked on 'Normal mode' hibernated, rebooted, turned off... nothing seems to work...

    DVD jump again... any help on this?

    Hello Danny

    What model of laptop you have exactly? Was this software already preinstalled on your device, or you install on your own?

    Try to use the system restore utility and restore the system to an earlier time. I put t know if this will help but you can try it.

  • Qosmio F30 - how to get started using the external CD/DVD drive?

    Hello Mr President

    I have a Qosmio F30. My CD/DVD drive does not work. I have the USB CD/DVD drive, but I think that F30 does not support external USB CD/DVD drive to boot to the top.

    Please help me. Now, how can I boot Windows XP CD?

    At first, I must say that I really wonder why you do not have something to trade integrated optical drive. Qosmio F30 is not that old laptop and is perhaps the warranty still valid. You should check with the partner of service authorized in your country.

    For start with external peripheral is not so easy because the external drive doesn't recognize started upward. Theoretically you should either external ODD visible to your Qosmio. For older laptop, it is possible if you start Notepad in pilot mode and load BACK to BACK. After doing this you have access to the external hard drive and can start the installation.

    You can do this with your Qosmio laptop?

  • CD/DVD drive has disappeared (TS - 802 (a) on my Satellite A200-TJ9

    Hey guys,.

    I'm having some trouble with my Satellite A200-TJ9.
    The DVD drive has disappeared earlier, done case disassemble the filter and it worked for awhile, but now it disappeared again.
    Tried uninstalling the drivers and reinstalling, but the drive does not appear in Device Manager, or even in the boot configuration menu.

    The reader will always spin discs and act as if it does not operate normally, but I have no way to access the disk.
    Any ideas?

    Thank you
    Garrick

    Hi garrick7,

    the drive is recognized in the bios?
    Otherwise, drive might have gone... or some may be defective electronic...

    If it is not recognized in the bios that the player could be dead. > change it.

    If she recognized correctly may be a software problem...
    Test it with a system-on-cd or try to boot from it.

    but I don't think that this problem is software partner...

Maybe you are looking for

  • ICloud email is unusably slow on all devices, including IOS

    Hello In the last few weeks, I noticed that icloud is ridiculously slow to deal with requests for access by email.  This is true on my iPhone 6, my old iPad, my Mac and my PC using Outlook as a front end. Moving or deleting an email takes more than 2

  • SANSA FUZE P

    My sansa fuze + is now read by rhapsody as a sansa fuze p.  What is the difference?  is no longer, it will download the video and he tells me that he is unable to be allowed.  No longer can I download new songs or play ones out there, given that the

  • Windows Media Player not able to burn the 80 minutes of audio

    MEDIA PLAYER NOT ABLE TO BURN THE 80 MINUTES OF AUDIO ON CD. I want to burn a 77-minute cd in media player and can not.   I add a playlist to the burnlist and Monte total autonomy than 77 minutes.  I use a 80 minute cd.  Media player automatically mo

  • TVSU and Windows 7

    When TVSU will be compatible with Windows 7? I noticed a bunch of updates are here tonight to fix the compatibility issues with other ThinkVantage programs, when we see this for TVSU?

  • Replication suddenly failing: status "inactive", "invalid state" error

    I've been replication between sites for a while.  Today, all but 1 on the States of VM replication has changed to 'Inactive'... then, of course, to the "not active (Violation of RPO).  When I try to force synchronization to occur now, web client give