Visibility and the children of pane

Similar Questions

• Vista not work not for several months. Set in China and the technology put a pirate copy, now afraid to use. Help

  Christmas 2008 I bought my daughter a laptop with Vista pre-installed.  In May 2009, my daughter called me and told me that her laptop won't turn on.  I am divorced and the children live with their mother in California.  They spend the summer with me in China.  When they arrived in the summer, my daughter brought her phone with her to get fixed.  We took him to the I.T. square in Beijing and the tech said that Vista has been damaged and that he would have to re - install.  When we came back we found he had re-installed a pirate (in Chinese) copy of Vista.  It was last July.  My daughter was afraid to use his cell phone since last summer.  Any advice on how I can get the computer back to normal.  It was bought with Vista on it initially and always has the product key on the bottom of the computer.  Any help would be greatly appreciated!

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   
  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can we change the visibility of the drop-down list after its creation?

  I create a QML document with three drop-down lists.  Depending on how "trans_type" is selected, only to drop Extra should be displayed.  If the option "account" is selected, the drop-down list is visible and the DD category is hidden.  The reverse is true if the 'category' option is selected.

  Here's how I build my QML document:

  void Testing::updateFields()
  {
      if (m_form.isNull())
          return;
  
      // Clear all fields from the form
      m_form->removeAll();
  
      // Clear the internal mapping
      m_fields.clear();
  
      //get the transaction page ready
      QmlDocument *qml = QmlDocument::create("asset:///transaction.qml").parent(this);
  
      DropDown* trans_type = qml->createRootObject();
      trans_type = DropDown::create().title("Transaction Type");
      trans_type->add(Option::create().text("Accounts").value("0"));
      trans_type->add(Option::create().text("Categories").value("1"));
      trans_type->setSelectedIndex(0);
      connect(trans_type, SIGNAL(selectedIndexChanged (int)), this, SLOT(onDDChange(int)));
      m_form->add(trans_type);
  
      DropDown* account_dd = qml->createRootObject();
      account_dd = DropDown::create().title("Account");
      account_dd->add(Option::create().text("No Account").value("0"));
      //... code to populate account drop down here...
      account_dd->setSelectedIndex(0);
      m_form->add(account_dd);
  
      DropDown* category_dd = qml->createRootObject();
      category_dd = DropDown::create().title("Category").visible(false);
      category_dd->add(Option::create().text("No Category").value("0"));
      //... code to populate category drop down here...
      category_dd->setSelectedIndex(0);
      m_form->add(category_dd);
  
  }
  

  Everything is displayed properly on the page.  onDDChange is called and it shows a Toast that the option has been selected.  Here is what I currently have in onDDChange:

  void Testing::onDDChange(const int &info)
  {
      QString msg = "Switched To: ";
      if(info == 0) {
          msg = msg + "Account";
      } else if(info==1) {
          msg = msg + "Category";
      } else {
          msg = msg + "Unrecognized";
      }
      showToast(msg);
  }
  

  I can't figure out how to get the drop down lists to be visible/hidden depending on the needs.  There is a function "setVisible()" for the drop, but I can not understand how to operate without the app crashing.  http://developer.BlackBerry.com/Cascades/reference/bb__cascades__dropdown.html#function-setVisible-v...

  My questions are:

  1. How can I change the visibility of the appropriate dropdown lists in a different function when the status of the main drop-down list is changed?

  2. is there a way to define an id for drop-down lists?  If not, how am I supposed to go into the drop-down lists in a variable later so I can receive their value or change the visibility?

  Any help would be great.  I've been struggling with this for a while.

  There are a number of methods you could use signals and slots between your code and the QML or something simple is assign "objectName" as a property, then this search in C++.

  http://developer.BlackBerry.com/Cascades/documentation/dev/integrating_cpp_qml/

  Something like

  DropBox db = mRootContainer->findChild("dropboxname");
  db->setVisible(true);
  

• Writes a table to a text file. (Save the children).

  I'm trying to break down an InDesign file in his sentences and export it to a text file. When I created a prompt with the contents of newArr.join ("\r") that everything looks exactly as I would like that there, the Sun is shining and the kids are happy. However, when I try to write the table to a text file, it seems as if nothing is happening, the Sun hides and the children are unhappy.

  How can I make the kids happy again and write the table in the text file?

  Thanks for any help!

  indesign #target

  myDoc = app.activeDocument; in file

  reportFile = File("c://users//kudrow//desktop//reportFile.txt"); file

  newArr = [];

  Goal management texts related to the file, split frames of related texts, push related on table frames

  for (i = 0; i < myDoc.pages.count (); i ++) {}

  for (j = 0; j < myDoc.pages [i].textFrames.count (); j ++) {}

  myFrame = myDoc.pages [i] .textFrames [j] .silence;

  newFrame = myFrame.split(/\r|\n|\./)

  for (k = 0; < newFrame.length; k ++) {}

  newArr.push (newFrame [k]);

  }

  }

  }

  write table to text file

  reportFile.open ('w');

  reportFile.write(newArr.join("\r"));

  reportFile.close ();

  Post edited by: KuddRoww

  Probably a text encoding problem. Add

  reportFile.encoding = 'UTF-8'
  

  somewhere after the definition of your reportFile but before opening it.

  (Unsolicited concern follows: where are your var?) Probably, it will not be a problem if you have no function and run in the main engine, but as soon as your scripts begin to grow in complexity, you will run in hard-to-find problems with the scope of variables. Better get into good habits now.)

  The f

• Windows 8.1 Flash Pro - Pro: selection of the Menu panes and the window doesn't make it not fully, or are misaligned. Same thing with the scene

  This bug makes the program almost unusable for anyone using Windows 8.1.  I have a Setup dual monitor: 1920 x 1200 and 1920 x 1080, on the other hand, AMD Radeon HD 5700 Series drivers (latest versions), running on an OS Pro Windows 8.1.  When you try to view the various aspects of menu option, windows does not realized fully, or you are hidden.  Also the scene so moves to the lower right, making the program almost unusable. I tested it on a Mac, as well as on a windows machine 7 and it does not work here.  So it seems to be that in a machine Windows Pro 8.1.   I've attached screenshots of what I see.  Notice to the first image, we look on the new component document. You don't see the options fully and that they are shifted to the right out of sight.  The following image shows both the scene shifted to the right, as well as the document pane.  The options are not fully visible and trimmed off the coast.  The window itself is not resizable.  I erased the appdata and re-installed the program. Same result.  I tried to solve this via the cat, but your guarded network connection is lost. Please let me know if someone suffers from this and any resolution. Thank you!

  

  Thank you Sir!  The scale was the problem and the solution.  Clicking on settings-> display-> text and fonts link-> it was set by default at 125%. For anyone else who has this problem, set it to 100% and it will solve these problems.

  Thanks again! Return to development

• the value of pan and zoom of the time constraints?

  PE10 using - I have a photo image that is attached to a total (hold time) that I want, I want add pan and zoom effects to it with back change the span of the image on the timeline. Is there a way to tell the first elements to force the pan aggregtate and unavailability zoom times not to go beyond the original image?

  To clarify, I had an image that held for the correct duration, but when I was sleeping w/pan and zoom, I found that I had extended the duration of the image, while it was now about 5 times longer that it should have been, and he threw all my other pictures to the bottom of the timeline. I like to keep the fixed duration without having to pull out my calculator and stopwatch.

  Thank you (just learning this...)

  calpolyjeff wrote:

  When I was sleeping w/pan and zoom, I found that I had extended the duration of the image, while it was now about 5 times longer that it should have been

  You must watch the landmarks of Pan & Zoom tool in the image and changes with the timeline when working in the tool. As you add / move / delete your frames you will change the elements of duration - the time to hold and the Pan.

  In the example below, my time to Pan between part one and part two is sixteen seconds. You can change this by clicking on the time of pan and enter a duration. The other times I've highlighted is is the second a downtime for two framework. Again you can change it by clicking on it. You can also see the time to stand for a framework to the second five point on the timeline itself.

  

  Hope this helps,

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• There should be a limitation or personal parental control on hotspot. Children feel obliged to allow their friends to use their hotspot. And the parents who pay for it!

  There should be a limitation or personal parental control on hotspot. Children feel obliged to allow their friends to use their hotspot. And the parents who pay for it!

  This is a user to user support forum, so there is really nothing anyone here can do for you, I'm afraid.

  However, you can send your comments Apple

  http://www.Apple.com/feedback/

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• I installed a bunch of addons and only a few icons are visible, and I can't find the rest help

  I installed a bunch of addons and only a few icons are visible and I can't find the rest. They apear in the area add Manager as installed extensions but they donot apear on add on bar. How can I find work them. search google for example picture

  its sad to hear that.
  Please read the article resolves your problem. If not, then let us know

  https://support.Mozilla.org/en-us/KB/what-happened-to-the-add-on-bar

  Thank you

• How can I display icons and text in the bookmarks toolbar. If I roll over the icon I can see the text. I want the icon and the text are always visible.

  Previously, the name of the link and the icon icon was visible in the bookmarks toolbar. I did something to cause the name disappear and cannot find a way to get it back.
  The only visible, at least I have the cursor on the icon, the icon itself.

  Hmm, I can't imagine an integrated way to display only the icons. Is it possible that one of your modules has changed the display style? You have "Roomy Bookmarks Toolbar"?

  You can view your extensions on the addons page and when they have an Options button, change their behavior. Or turn them off. I suggest starting your investigation with those:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Something seems relevant to the bookmarks toolbar?

• The firefox browser window is not visible, only the toolbar. Have deleted and reloaded but no change

  When I open firefox, only the toolbar is visible. The main browser window is not available. I tried to open a new window in the menu bar, but no browser window appears.
  I deleted the program from my mac and reloaded a new version on the mozilla site, but still no navigation window.
  I'm not able to access the reset button, it takes a window is visible.

  I use a macbook pro with the latest osx responsible.

  You can try to do some maintenance.

  Repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html

  Delete the plist of Firefox (org.mozilla.firefox.plist).

  • http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting

  Go to "~/Library/Preferences" and delete the plist for Firefox (org.mozilla.firefox.plist)

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Still not get the filtering and the SUMIF with visible cells

  Hi all

  I know it is a pain for you people, but I'm really stuck with this problem.

  I tried to use the answers I found in the community and the User Guide, but I have to be closed to this kind of explanation.

  Once again:

  In the column A is a series of dates

  In column B the value corresponding

  In the foot of B line, I want the SumOf only the visible cells that I filtered before.

  So far I have always the sum of all the lines, filtered or not.

  I added another column with a True/False value and tried to use it but get the same result.

  I'm pretty slow, so I guess that I'll need your help once more.

  It is the sum before filtering:

  

  And that's the sum after filtering:

  

  I thank you for your time and patience.

  Lopez

  Lopez Hello,

  Table filtering only affects the rows that are displayed. Hidden lines are always included in the calculations of formulas referring to them.

  Your formula, = SUM (B2:B16) summarizes the content of all the B2 to B16 cells, including those that are hidden.

  There are several other functions in the family of the SUM. SUM, SUMIF and SUMIF. ENS are of interest here.

  SUMIF (English: SUMIF) accepts a condition and only adds the cells on the lines which is assembled as a condition.

  SUMIF. ENS (English: SUMIFS) accepts several conditions and only adds the cells on the rows that meet all the conditions.

  For the example stated in your post, must be the form you need:

  = SUMIF. ENS(B; A; "> = 02/01/2016." A; "" < 03/01/2016 ")"

  (NOT tested. The dates should be placed in two cells and these cells referenced in the formula. post a reply with any error message if the formula does not work as written).

  The lines not included in the amount need not be hidden.

  If the formula is inserted into column B, it must be in a line defined as a footer line using the menu item in the same position as the highlight in this screenshot:

  

  Footer lines can be placed on foot (bottom) of a table.

  Kind regards

  Barry

• Just updated again Firefox THE BROWSER NOT VISIBLE AND DO CAN NOT FIND IT anywhere PLEASE RESPOND IMMEDIATELY

  Just updated after receiving the message 2 days ago for updating firefox again (am away from page please do not ask which version... it is the most recent) there are NO visible BROWSER and cannot find anywhere. I'm not if tech savy I don't have to hunt for the basic functionality. If I understand what "browser" stand for: I understand that it is the place where you type in the necessary Web site? as in: www.nobrower.com please answer very simple and easy to understand language Jack

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• "When I click on: Favorites" menu drop-down will remain visible. It flashes and the.

  When I click on 'Favorites' from the menu drop-down flashes momentarily and is therefore not visible. If I hover over the list, each bookmark flashes momentarily and then not be visible. The list is actually still there because when I go to where it should be, the hyperlink is displayed in the lower left corner of the window.

  In Firefox 4 and later Safe mode disables extensions and disables hardware acceleration.

  • http://KB.mozillazine.org/safe_mode

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.