Visio icon - Logical UCS

Similar Questions

• Telepresence Visio icons

  Anyone know where I can find Visio icons for Cisco/Tandberg telepresence units?  Unity not real themselves but the generic icons for CallManager, CTMS, VCSC, telepresence, etc..

  Happy to help you.

  If you want, please check the question as answered.

  Sent by Cisco Support technique iPad App

• MS Visio icons?

  Of where to get Visio icons such as those attached to this post?

  I found suite link such things are they are pretty classic.

  http://www.Cisco.com/Web/about/AC50/AC47/2.html

  http://www.Cisco.com/Web/about/AC50/AC47/2.html

  Kind regards

  Brett

• CUCM Visio stensils

  Hello

  I wanted to know is there a place I can download visio stensils specific for Unified Communications. I am putting together a diagram of the works of our cube router and I wanted to use router real cube icon and a CUCM icon as well. Thanks in advance for the help and have a nice day

  Have you seen the Visio templates available here.

  http://www.Cisco.com/en/us/products/HW/prod_cat_visios.html

  Just a tip, sometimes I like to mix in the marketing with the standard visio icons icons to give a more pop drawing.

• Export of custom to another logic/computer icons

  I would like to export my custom icons LPX to an iMac, in a city far from my Studio, where I teach a course on Logic Pro X. could I do?

  Hello

  Go to the order of icons in the header of the track, click the control on one and choose 'show in Finder '.

  Copy the icons in the Finder.

  TDC

• Icon not showing on XP for Visio

  Captures a part made for Visio 2010 on XP SP3, after ThinApp package build icon can multimeter on WIN7, but not XP.

  Any help appriciated

  Can you, please, any correct answer to this thread can be marked as answer?

  Thank you

• Logic 10.2 – removal of custom icons?

  Someone knows how to remove custom icons in 10.2, or the location of the folder where they are stored?

  Thank you very much!

  Resolved - the answer is... "Right click" on the custom icon you want to remove in the window icon.

  (Would probably be good to have a sign less too however)

• iPad pro icon load acting strangely.

  Since iOS 10.0.2 was installed when I charge my iPad Pro 9.7 "icon at the top right seems to act differently.

  Before the iOS update when I plugged the cable into the icon would change from the percentage text and a white bar for the battery to a green bar and the prosecution would progress (sometimes the text would update) and move the green bar. When 100% has been reached the green bar would be change in white and below it would say not charging.

  It seems now the green bar works fine, up to 95%. So if the iPad goes into 'sleep', when I wake up it it says NO charging current, but there the text usually is greater than 95%? If I pull the rope and reinsert, the bar turns green, but at some point he indicates NO CURRENT charging or the screen goes black and when awakened it indicates NO CURRENT charging.

  However, once it reaches 100% now STAYS green bar? He turns not white nor the State DO to RECHARGE not?

  I do NOT use a standard charger, but an Insignia desktop charger. This has worked for me for years without problem? Even on this iPad Pro (and an iPAD 2 and 3 in the past).

  Ideas? Code modified to load differently to avoid overheating of the battery? My charger is a failure? Do not recharge the iPad is slower than before?

  Confused...

  Hello. They changed the logic that monitors the loading. As you say, everything works as before. If you use the original charger, that it should behave normally, because it will receive a higher current (faster loading).

• where are all my logical session files stored?

  I have logic on my computer and save all my sessions on an external hard drive, but on the hard drive I don't see the icon for the session, no files or anything, as in Pro Tools theres a lot, a lot of files for each session, but not with the logic! just an icon of the session and that's it!

  I can't complain, just a logical question works / records in a different way?   It seems easier and more net like this.

  When you save a project in logic, you can save it as a file or a package.

  If you save as a folder - you can see the directory structure of the file system that you expect.

  If you save as a package, the package contains all of the assets of the project.  If you want to see these assets, highlight the package in the finder file, then right click and view the package file. This will show you the files for the session all contained in a nice package file.

  

• How to replace the logic board MacBook Pro mid-2010

  I have a MacBook Pro 13-inch mid-2010. About once a week, monitors (one who is part of the laptop) and an external will turn grey and freeze. When I turned off the computer, it brings back me to the login screen (I'm under 10.11.5), but I can't move the pointer (whether with my Apple Wireless Mouse or trackpad) to select the icon for my login. After a few reboots, the computer takes care of the password reset function. And there, I can reuse the mouse, select Restart the machine, and I'm back on my way.

  The genius of Apple and I suspect that the problem is with the logic board. Unfortunately, Apple has more parts for MacBook Pro mid-2010. I contacted a few service centers certified Apple the kind told me; None of them can help either.

  Any suggestions for how I have a fix for this problem? Thank you!

  You could contact a specialist to see what their requirement is to send you the

  computer while for a diagnosis appropriate; a specialist is the one who can do all the

  works internally and could actually fix the edge logic that the Mac came with.

  I know some who do this; they charge more than a parts Exchange hosting.

  You can see what a company such as wegenermedia can do. Or see what the

  iFixit guide for Mac (for your specific model) said repair and watch to see who

  part numbers are involved in replacement of the like-kind in refurbished or tested

  OK, from sources such as powerbookmedic.com and other sources used parts.

  The logic board may not be a problem; might be some on the Board of directors or of one which

  attached to, such as the graphics processor. These older models are not

  so difficult for a specialist expert set. While the Mac is able to do so, is a good time

  for they provide labour expertise to swap upgrade replacement parts.

  They can test the feature set and should provide a guarantee for employment.

  Some of these companies repairs also restored the supply of older computers they fixed.

  Good luck & happy computing!

• Attachment will not remain an icon.

  How to add a pdf file to an e-mail message and have it appear as an icon at the end of the email (which should be double clicked by the recipient to open it)?  Apple adds some PDFs as icons, but extends to others.  I don't understand the logic behind it, or a way to reduce the full page down to an icon.  Any suggestions?

  oliversedona wrote:

  a way to reduce the full page down to an icon.  Any suggestions?

  You can control (right click), click on your PDF file and the compress.

  It turns into one. ZIP file and send this way must be double click to decompress (open) at the end of recipients.

• Vise to install 1008:9,-5000 access denied error installation Vocalizer for Logic 9

  I get the error:

  1008:9,-5000 access denied error

  As I am installing of Sonivox Vocalizer. It is a plugin for Logic 9.

  I traced down on the threads here that it's a common problem with the vise Installer application that many use to install their software, so they do not install for the same reason. Apparently the cause of changes in security in mac OS.

  How manually set privileges TEMPORARILY so that I can get this software to be installed from the installation disc?

  P.S. I already do not clean install (only admin), updated, then disk utility used to repair permissions and that it was not fixed.

  The system version: OS X 10.9.5 (13F1712)

  Kernel version: Darwin 13.4.0

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Only suggestion I've seen who could work is to understand what files they are manually and selectively instal time machine. Don't know what files choose so what makes a very hit or miss solution and I would rather understand how to change the permissions.

  Emailed to Sonivox support more than a week: no answer, so I post here.

  Model name: MacBook P

  L3 Cache: 6 MB

  Memory: 16 GB

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• Satellite U400 - I confused speed up my system - removed desktop.ini icon

  Some time ago I moved (or deleted) a desktop.ini icon.
  This changed the way files/documents are stored on my computer.

  I get a lot of shortcuts that I did not do and seem to not be connected to anything.
  There are a lot of ntuser.ini and NTUSER. Icons DAT in different folders.

  The files are duplicated, and appear in paces I put them.
  No document is missing, but it takes time to find them; the logic of the production system seems to be lost.

  How to restore the original system? I don't remember when I made this mistake, and I wonder if I did a system restore or something like that could happen to all the software that I subsequently towards the down loaded.

  I'm not very expert in computers, as you may have guessed.

  I have Satellite U400 and Vista.

  Hello

  Have you tried using Windows Vista system restore? You can set the operating system goes back to an earlier era. Therefore, you must go into the advanced boot menu, select fix my computer, and then click System Restore.

  In the worst cases, you reinstall the full operating system. You can use the function of HARD drive recovery or the Toshiba Recovery disk you burning?

  Good luck!

  Welcome them

• Icons of track where they are stored?

  I have 2 Mac under my MBP and my main MacPro logic...  I started to use icon to help speed up searching for tracks etc.  but when I open the same song on my MBP icon are missing. is there a file system with these in I can move copy?

  Hello

  LPX, custom icons are stored here:

  Macintosh HD > users > "You" > music > Music Audio Apps > Custom Images

  TDC

• Is there really no way to change the spacing of grid icon?

  My new iPad Pro is pretty well what I was hoping, with the exception of the 4 x 5 grid incredibly Needless to the app icons. On all other devices I use, this big screen would be comfortably and readable display four times more items, or more, avoiding to go back between home pages. I already spent a lot of time wandering through my pages trying to find applications of interest, and I just started to charge this device with the stuff I use. I understand the desire for consistency on all platforms, but this seems extreme. In this logic, all iOS devices should all have the same resolution too. As far as I can see, the only way to change the icon spacing is to jailbreak the device. Is this true?

  There is no way to change the spacing of app icon. Have you tried to use folders on your home screen?