Vista 32 sp2 causing problem with dell laser printer 1720

Vista sp 2 apparently automatically updated and after that, the dell 1720 laser printer will spit on a white sheet, then the desired on a second document sheet.  I spent 3 hours on the phone with support technique dell with no resolution.  They feel that it is perhaps because of the addition of the 2 service pack. Always, it prints a few odd at the top of the first sheet numbers, if anything, then prints the document requested on the second sheet. It does this by using any application (Notepad, wordpad or other software).  Someone at - it ideas?  I'm certainly not the only one having this problem?

https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

Microsoft free support for Vista SP2 at the link above.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Vista premium sp2 updates fail with error 80070643 dt000

    Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

    Hi Ruth,

    Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

    Method 1:

    You can perform the steps described in the article.

    You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
    http://support.Microsoft.com/default.aspx/KB/958052

    If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

    Note: If you have already completed the steps in this article, you can go to the next method.

    Method 2:

    You may need to restart the Office Source Engine (OSE) service

    Windows Update error 80070643

    http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

    Hope this information helps. Response with status so that we can help you.

  • Recovery system causing problems with the size of the screen.

    Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

    Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

    Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

    Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Firmware update recent Airport 7.6.7 causing problems with VoIP

    Hi all

    Firmware update of recent Airport 7.6.7 causing problems with VoIP.

    Unable to connect voip since update...

    Any help appreciated.

    Thank you

    It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

    My MagicJack & NetTalk lines properly.

    Jim

  • Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

    I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

    Hi Rick,

    Thanks for posting your query in Microsoft Community!

    The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

    1. What is the exact error message with error code?

    2 did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

    Check your hard drive for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

     

    Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

    Method 2: Try the SFC (System File Checker) scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

    Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

  • Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

    I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

    LindaSView

    Hi Linda,.

    Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way?  Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer.  But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

    If it works fine, then you can pass the wireless problem.  Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

    I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

    Good luck!

    Kosh

  • Too many antivirus applications can cause problems with degradation of my computer?

    Applications of Internet protection

    =======================

    Since upgrading my Dell Inspiron 530 from Vista 32 WIN7 32 originated in the month of August, I found these programs within my OS System.

    It is almost certain that some conflicts here have asked my useful apps.

    Firefox no longer works. Chrome has flaws also. Gmail has somewhat lost its useful features.

    You have opinions, the following need to be uninstalled? Which, if any, should be the priority?

    Are there other applications known to cause harm like this?

    ============

    AVG safe search

    Glary Utilities

    McAfee

    Norton Internet Security

    PC Antivirus

    PC Cleaner Pro (PC cleaners)

    PC utility Tools

    Windows Defender

    + 1 first get rid of McAfee and Norton. Both are known to block things silently and bogged down machines with their heavy use of resources and analysis of this and that.

    Ditch then PC Cleaner Pro.  A little harsh work that many have trouble getting out of their machine.  If you want to use a 'clean' the CCleaner program test.
    If PC Antivirus are the same people who unload as well?
    Wire removal PC Cleaner Pro-

    Avoid leaving one of these utilities register "cleans" however.  Registry cleaning is a return to slow machines and the small HARD drives and RAM and can do more harm than good.
    The main reasons which need cleaning can be done with the occasional defragmentation and Windows disk cleanup (after installation of software or games, is a good time) drive hard (SSDS do not need defragmentation).
    You can manually delete the files in the Temp folder in your.
    The user-App Data-Local folder if you like. Other than that, just keep the machine erase useless files and uninstall unused software using programs and features and your machine should run smoothly.

    Also go to the System Configuration - type msconfig into the start menu search bar or in
    the 'Run' - command and go to the Startup tab.  Clear the check box next to all programs
    which need not be loaded when you start in Windows.

    You could decrease the other "bloatwares' so - Glary Utilities and PC utility Tools that they can be useful, but mostly they just make tweaks that you can do it manually the applications the Panel configuration or places like your taskbar and start menu"Properties ".

    AVG is OK, but MS Security Essentials has grown in popularity (I always use Avast), as
    is Malwarbytes (often as a crossroads/backup reference and does not work all the time).
    The threat of the new wave is rootkits. Rootkits is difficult (impossible?) to AV to detect, so
    you need something like BitDefender Rescue Disk for detection of rootkits. This is performed from a
    CD/DVD or a bootable flash drive.
    Sophos Anti-rootkit will run Windows, but it is not as effective as BitDefender.
    Note that there are legitimate programs that work in the same way as rootkits (eg. - SecureRom).

    I currently Avast resident and have Spybot Search and Destroy and Malwarebytes installed to use to cross reference analyses. I have no problems with these installed three at the same time.

    .

  • Fuze causes problems with the new Gigabyte mb

    I know this may sound weird, but with assistance from others and a lot of time to put into it, I found that the "rocket" poses problem with my new motherboard Gigabyte EP45-UD3R.

    I was getting problems strange behaviors and reboot, flaky stuff.  Once I reduced to my USB devices I then reduces it to the "rocket".

    Anyone know anything about this at all?

    I would have given this another day before posting.  But I have the answer and it will go here.

    In the BIOS with the EP45-UD3R (Gigabyte is not a brand off but very good Mo and has existed for some time - including Dell has used their) there is a setting under embedded devices.  It's called "Legacy USB Storage Detect". If this option is enabled it will attempt to boot from a USB device. The "rocket", like others, lights up as soon as your PC turn on.  It was trying to boot from the "rocket" and causing flaky problems.  Once that I disabled it the problem has been resolved.

    I should have taken myself.  Arghhh...

  • Event Viewer windows will cause problems with your computer

    Windows Vista Ultimate: Will be the windows event viewer are causing problems, such as freeze ups, slow down, with your computer?

    There is never for me, and I never heard him make.

    I hope this helps.  Good luck.

  • Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

    I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

    I don't know which driver download for this problem.
    If anyone can help it will be much appreciated. I am running windows Vista x 86.

    Hope helped photos

    Hello

    The first error message said nothing; He only says that something is wrong on the HARD drive.
    Why you n t pres the button Don t ask me once again this problem?
    It seems the message again using this option?

    On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

    On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

    Check it!

  • Sometimes when a windows update it causes problems with my photosmart c4795 printer. Usually making it unable to find or may not be usable.

    problems with windows update problems with my printer causeing

    Hi Virgil13,

    · You receive an exact error message or error code?

    · What is the operating system installed on your computer?

    Run the fix it from the link below and check off the results: printing problems and printing errors:http://support.microsoft.com/gp/printing_problems

    Also check the installed updates:

    a. open Control Panel from the start menu

    b. Select programs and features

    c. click View installed upgrading

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Is anyone has problems with Dell support - called using micro

    Hello users of the Forum.

    My 2720 xps is not save anything when I use the microphone jack and little record (low volume) anything when I use the microphone. I also have questions about the use of large screen XPS2720 to extend my laptop screen using HDMI from laptop HDMI in the XPS. It does not either. Here is my support issues:

    1 has reached the customer. The person would put me on hold for each 2 questions simple and "research". His answers were vague, and then he said he would transfer me to Office work support as he has managed "inspiron" only! His transfer has failed and abandoned call.

    2. calls on the customer. Voice was smothered at the other end, when I mentioned, so the call dropped!

    3. calls on the customer. The person could not understand what I was trying to make (connect laptop XPS display and audio not sent / mic jack question), he tried to understand the question but kept in interpreting everything that I said mean that I was trying to extend the XPS specification to a monitor. I asked to speak to someone who knows the best product, he informed that he will put the prime contractor, and the abandoned call. Now I'm wondering if there is another meaning to call down when Dell is unable to answer.

    4 called again, the first person who I arrived before also picked up my call, when she heard what I was looking for the resolution, the call dropped.

    I don't know what is happening with Dell technical support. I would like to know if anyone else had experiences similar to my problems, especially when Dell support is unable to successfully respond to the question.  I really prefer to talk to actual dell support person in the United States (instead of people at offshore call center) to get answers to my questions. I tried to download the XPS manual and the link led me to a PDF doc, which indicates that it is the manual of the user, but everything, it's a manual to pay off the system - open lids, replace chipsets, back cover, display etc.. !! Frustrating :-)

    As Mary said, there are 2 ports HDMI on the XPS 2720. If you try to view the screen of the laptop on the XPS 2720, you must use HDMI-In port on the back of the specification XPS (#14 here).

    There are also press the input source selection button (#9) to select the input source. It may take a couple of presses until she "cycles" through all the choices and sees the laptop. So, wait a few seconds between the push to give him a chance to change the input source.

    And you should probably also go into Windows Display options on your laptop and make sure that it is set to use a second monitor...

    EDIT: Link fixed

  • Problems with Dell USB - C (DA200) to the HDMI, VGA, RJ45, USB3 adapter

    Hi all

    I guess I'm a little desperate at 01:45 haha...

    I just got my XPS 13 9350 and it's great. I bought the USB - C DA200 adpater USB3, RJ45, VGA, HDMI. Unfortunately, I have some difficulty with the device. They are listed below:

    (1) plug, computer does not recognize the device. If I right click and uninstall in Device Manager and do a scan 'new material', it works again - but not for long.

    (2) the device and the Realtek gigabit portion to connect and reconnect every second in Device Manager and it's annoying.

    (3) disabling the wireless card/connection really seems to help the unit to connect and it works 100%. ONLY when the wireless adapter is disconnected.

    Basically, windows is to have a real time hard keep this adapter plugged... almost as if he can't recognize it. I tried to install the drivers for the card - nothing. I've updated all the firmware from Dell crush (including the chipset) and the BIOS... nothing. Same thing. If you do a search on google, there are a few discussions on this problem. There is a nice size on Reddit.

    Someone has an idea, what happens? It's a real shame that a beautifully designed and expensive adapter does not work with a Dell computer.

    Thank you, AJ

    In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my XPS 13 9550 problem using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

    ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

    My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

  • Problem with DELL Inspiron 3521 audio!

    Hello

    I bought this laptop DELL Inspiron 3521 sometimes back and I am facing a problem with the audio. I had the experience that I use only. Audio keeps switching from left to right and sometimes works only on one side. Initially, I thought that it was a problem with my headphones but I tried with several headphones and still I have experienced the same problem. But the speakers of the laptop works very well. Could this be a problem with the audio port? Can someone help me on this.

    Thank you

    Umesh

    umeshjaishankar
    Could this be a problem with the audio port?

    Hello, Daniel. How to determine who must pass the native Windows audio driver Realtek audio driver. If you don't have the driver from Realtek, you can get it from the Inspiron 3521 support page.

    1. open Device Manager (type devmgmt.msc in the box of Windows search).
    2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    3 Select this option to "Update driver software".
    4. click on "Browse my computer for driver software".
    5. click on "Let Me pick from a list of drivers on my computer".
    6. put the "Show compatible hardware" check box if not already checked.
    7. in the list of devices, click on 'High Definition Audio"(native driver).
    8. click on "next".
    9. in the update driver warning box, click 'Yes' (the driver).
    10 restart the portable computer if you are prompted. If not invited, so no need to restart.
    [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

    If the headphone does not work correctly when you use the Realtek or driver audio native then it's a hardware problem.

    If it works fine with the native driver but not the Realtek driver, then the Realtek driver is buggy. In this case let me know which operating system your laptop and I'll see if there is a Realtek driver different, that you can use.

  • Problem with Dell inspiron 15 3542 baterry

    I have a problem with my new dell inspiron 15 3542. When the laptop is turned on, and j charge the baterry Full, therefore, with normally use (listening to music, surfing, etc.) the baterry minus 3-4 hours, but at night when j off the laptop, no mether baterry state what, in the morrning when I want to turn on the laptop, I can not because the battery is drain to 0% , and this always happens. J bought the laptop 6 days ago, it's new. Anyone has the same or similar problem. Help please...

    "I bought the laptop 6 days ago.

    Update the system (BIOS) configuration:

    https://youtu.be/mWn9YfxtYBo

Maybe you are looking for