Vista 64 bit continues to restart the PC after the update

Similar Questions

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running vista 32 bit and I think the upgrade to windows 7

  I'm running vista 32 bit and I think the upgrade to windows 7, I don't know if I choose the upgrade option, I can keep all my files and all the software that I

  installed on my laptop but that include photos, video and music and send the parameters I use outlook 2003.

  Thank you

  Hello

  Depends on which edition of Vista you use on Windows 7 edition, you can switch to.

  And as you use 32-bit, you can only switch to Windows 7 32 bit.

  32-bit to 64-bit should be done with a clean install.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.

• HP Pavilion a6109n Vista 32 - bit, windows cannot load the driver for ATAPI DVD A DH16A1L CD-ROM

  HP Pavilion a6109n Vista 32 bit
  Windows cannot load the driver for ATAPI DVD A DH16A1LCdRom

  Hello

  Try the Microsoft fix it Center.   You receive this error code?

• My computer (windows vista) is not able to check the updates of windows, anyone able to help?

  My computer (windows vista) is not able to check the updates of windows, anyone able to help?  I get the following error message

  Hello

  What error message?

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum, INCLUDING the error message

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• All-in-one OfficeJet Pro 6978: OfficeJet Pro 6978 creation for Vista 64-bit Home - where are the pilots?

  Hi - Install CD says operating system not supported. Cannot find drivers - that the reference to "Readiris Pro for HP 14". Support video says to look for hppiw.exe which I can't find on a HP site.

  Is the problem that the 6978 OfficeJet Pro cannot run with my operating system Vista Home 64-bit? I bought yesterday, so I can return it.

  This should be simpler, so THANK YOU for the help and advice.

  Hello

  The printer is incomaptible with Vista 64-bit.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  Kind regards

  Shlomi

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Vista 32-bit Home Pemium does not start after the automatic update. Crashes 90% during step 3 of the configuration of update.

  Started to start for the first time today, and after half an hour of PC was still at the stage of configuration update 3 to 90%. Tried to restore the last good configuration without success. IE 9 has been installed yesterday and I rebooted a couple of times very well. I guess an automatic update downloaded all night is the problem.

  Hi Dick50,

  Try the following and check if it helps.

  Method 1: Try to start the computer in safe mode and see if you can start fine. If he is able to start try to perform a System Restore.

  System Restore: frequently asked questions

  Method 2: If it is impossible to start then try to boot into the Windows recovery environment (WinRe).

  ·         Do the Startup Repair.

  ·         Achieve the restoration of the system from the same options.

  Method 3: Once you are able to start normally, look for the updates and take note of the update that is offered.

  Just reply with the results.

• No way to restart the update of Sierra after cancellation

  Technical details:

  I'm on a mid 2015 macbook pro 15 inch 2.2 ghz, 16 GB of memory, 250 GB of available disk space.

  Downloaded MacOS Sierra of the store. The Installer started and I immediately saw a message that said something like "Cannot install to drive (null)", which expelled the red flags. I canceled the installation and tried to restart from the app store. Unfortunately, the app store says that MacOS has already been downloaded, and there is no way to start the installer again. He is not sitting in my purchases or update the collection.

  Any tips to get this back online and running update?

  Delete or drag to the trash of the app install OS X Sierra in your Applications folder. Try to download again. However, you can try first this:

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  Make sure you have at least 20 GB of free space on your drive. Make sure that the drive is formatted Mac OS X extended journaled.

  Basic steps for the OS X upgrade

• Vista - Error Code: 646 (cannot install the update of Office KB2288613)

  Hi, Windows Update advises me to install this hotfix. I have Vista and MS Office 2007. Whenever I try to install KB2288613 error code 646. I tried to install manually; run this FixIt:http://support.microsoft.com/kb/2258121 restarted and tried to install. and also disabled UAC, rebooted and tried to install, but without success.

  However, if I have MS Office 2007 and not MS Office 2003 I really need this patch and if not, why am I being advised to install it?

  The following article:
  http://support.Microsoft.com/kb/2288613
  ... has this:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

   
  Can download, save and try to install manually:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bb7783b1-b396-4254-B317-f2292b305cfc&displaylang=en
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• I have Vista SP2. Windows cannot check the updates. A previous audit of update 27/09/11. PC turns off only with button / stop.

  Vista SP 2 x 86 32 bit

  Compac Presario SR2180 NX

  disk defragmented

  the disk check run without error

  Registry verified

  Norton Internet Security 2011

  Norton Utilities 14

  1 single antivirus running

  A previous audit of update 27/09/11.  I downloaded and installed manually updates failed.  I followed all the links from Microsoft and others.  I can't always check the updates.  The update is running for hours and then said: he can't check the updates.  My pc can't sleep or turn off automatically.  I tried the fixes recommended running but can not install them.  The program runs for hours.  I can only stop it by using the power button to turn it off.  Everything seems to work fine otherwise.  I use Norton Internet Security 2011.  There are no viruses or other problems, he can find.  I ran the disk check, no errors have been detected.  I spent hours trying to solve this problem.  Every step seems to take me one step closer to an answer, but not enough to solve the problem.  Any ideas?  The updates have been downloaded and has not installed were all related to the .NET Framework 4.0.  NET 4.0 has been installed on my PC in 2009.

  Hello

  Tried all of these options with no improvement.  Stumbled upon an answer that described enter deeply into the Windows registry.  (I do not remember where it was.)  I had checked before, some of these files, but not these.  Some of the updated files were missing.  I backed up everything and put the recovery disk in.  Success at last!   My PC and I are both happy now.  I'll bring back had more than 100 updates that should be downloaded and installed.  I didn't know if I'd do them all at once, so I started with some of the older ones, but they have not all install. Then checked to install them all.  Updates made in the order of most importance and in the right order needed.  I had to do some updates more than he has found since then.  I am really satisfied with the result.  I'm going to put programs and files back on my PC for some time, but I'm not tearing my hair.  Maybe this will help someone else.   Thanks for the suggestions, all help to improve my knowledge about computers.