Vista Defrag does not start

Similar Questions

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• MY WINDOWS VISTA COMPUTER DOES NOT START AFTER CLOSING GAME?

  LAST NIGHT I WAS PLAYING THE GAME ON THE COMPUTER. THEN I TURNED OFF THE COMPUTER. THEN LATER WE I SWTICH IT ON AGAIN NOW IT DOES NOT START THERE FACT THAT HAPPING PLEASE SOMEONE CAN HELP ME THANKS

  What happens if you go in Mode safe?
  Screen opens in safe mode?

  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen.
  The top/down arrow and select Mode safe mode with command prompt.

  If you manage to logon in safe mode, follow these steps:

  1 do a system restore. Choose the date BEFORE you played the computer game, as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, click
  > Next > finish
  To sit and wait. The machine restarts when it's done.

  2 make a check of the file system. It's for search files corrupted and did try to fix them.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

• Pavilion dv6700: Pavilion laptop computer under Vista: Windows does not start, the Startup Repair cannot fix it. What to do next?

  Hello
  My laptop seven year old made me proud til yesterday, but now it does not fire upwards. Instead, it hangs for a minute or two (black screen, no HARD drive light blinks, nothing), while it charges to a screen with two options - either start the system restart or start Windows normally. The second option takes me around the loop again. The first option tells me that it cannot fix the problem automatically. When I display the error details, it lists all of the tests, as adopted successfully, but ends with the words: "Root cause found: failure so that the Setup program is underway.

  I'm sure I know why she fell: two days ago, I left all my files on a portable player and defragmented the disk. The idea was to speed up the machine and get it running like new. He immediately started to hang when connecting, so I thought, well I'll go for a complete restoration of the system. I followed the procedure using the disks provided with the machine, and that's when it stopped working completely. I felt that this was more than the aging than HARD drive could take.

  My attempts at rejuvenation have actually caused his untimely death? Or is there a difficulty - something I could undertake?

  Or should I just bite the bullet and go and buy a new machine? When everything (screen, keyboard and trackpad) worked so well, it seems a shame...

  Any help or thoughts welcome. Thank you

  If you really want to resurrect, you could certainly purchase a new hard drive and try to restore the system of work using the recovery media - but then, even if it did work, you would have still lost all your data, settings, and applications in the process - and having to reinstall all your applications everywhere again.

  Hey, don't feel bad, I'm guilty of this too - has recently attempted to resurrect an era Tablet XP PC so that it can run Win10!  He went from XP to Vista, Win7, for Win8 - and along the way, gains of new memory and drives hard - but the Win10 bet was too.  So, I got to a "give up to use it.

  However, I also kept a cell phone 5 year alive by replacing the HDD with a SSD and adding more memory.  So now it is faster than ever, it has been and works like new.

  But... He has NO touchscreen, there no USB3 ports, it doesn't have 1 GB ethernet - and the list goes.

  Thus, it works very well for what we use it for - but it can't really be upgraded, so sooner or later, we will have to replace it.

  Everything depends on how much you need 'new' - touch screen, stylus, handwriting, camera, 3 USB ports, display port jack, HDMI ports... etc.

• Vista Defrag does not work continues by saying defragmentation will improve performance after hours of defragmentation

  I ran Defrag Vista several times (each for hours) and always says that "defragment your drive hard drive will improve the performance.

  It seems that he never really ran that whole defragmentation at all! It is perhaps also the reason why Defrag Vista does not display progress with graphical display. It does not work.

  Who out there can help find a Defrag Vista work?

  Thank you

  Hello

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• Vista Ultimate does not start: c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  All of a sudden I started my laptop and Windows does not load.  I received a message "failed to nobulate".  I searched in the help forums and found that I could create a boot CD (because the OS came preinstalled on Dell INspiron 1720 laptop computer).  I tried to perform a Startup Repair 11 times.  The repair details show:

  Boot critical file c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  I also tried to visit the advanced repair and selecting to restore from an earlier point in time, but I relieve error that no previous points are detected.

  Help, please!  I '; ve been against a week and need back up and going.  Thank you!

  Sue

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon

  Mick Murphy - Microsoft partner

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• VISTA computer does not start until "STOP: 0xc0000139 {Entry Point not found}".

  Original title: computer VISTA will not start

  I get this error when you try to start my vista 32 bit

  blue screen with:

  Stop c0000139 (entry point not found)
  Wcsncpy_s procedure entry point could not be located in the dynamic link library ntdll.dll.

  tried to start in every mood and nothing works. Help, please

  Hi Ad-HocHelp,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A200 PSAF6A - Vista now does not start

  A200 PSAF6A - 02C01N Vista built-in HARD drive recovery

  My friend used this PC and she just closes without warning.
  Vista won't start now... Turn it on and it starts to load then apparently hangs on a blank black screen just before the Welcome screen.

  I tried to use Linux to access the drive to get its stuff out before you reinstall, but several different versions of Linux can not install Windows.

  I tried the system recovery running now the 0 key during startup, then releasing 0 when the pc started to beep.
  Starts the recovery of loading, then the screen goes blank for a while, then rises... error... F3-F000-0001 error code... Press ok to reboot.
  Press ok, error message will... screen is blank... drive hard HDD light shows work... but it is not closed.

  Tried to launch a drive to reformat Vista. Boots in the disk, loads the files then crashes, just like the original problem, on a white screen.

  Tried the XP disk running... works well until it gets to the part where you choose where you want to install... and said... cannot install on this pc it is no hard drive!

  Tried formatting disk with Gnome Partition Editor... It hangs in the review of the disc.

  I think the next thing to try is to throw the thing out of a tall building and see if it can fly...

  Anyone got any ideas?

  Hello

  HARD drive is recognized correctly in the BIOS settings?
  I think that the HARD disk is dead.

  Please check the last assignment under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140926
  Raver post the correct link in his assignment. Try to check the HARD drive.

• (Vista) computer does not start properly (Please HELP)

  My guarded vista stop without known reason. He started up the main login screen and I could connect. After that so long it would just turn off. I did a system restore, system repair at startup and F8 pressed and is entered in safe mode. Now, I have a new problem. He worked for a few hours. Enough to do a bit of homework. Then suddenly it disconnects and begins to do the updates for windows. Then it goes to a black screen and tells me what he planned for a clean disk. So he goes through this process and restarts. Now it is impossible to get pass Part 3 of 3 updates and it just stays at 0%. He will remain on this page for about a minute and just keeps restarting itself. I tried F8 again and cannot get into safe mode. WHAT IS WRONG WITH MY COMPUTER HELP ME! (PS: now I use my laptop which is a XP!) Help, please!

  Hello

  Follow the troubleshooting methods in this article to resolve the problem:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

  Tittle says it all, I tried safe mode and the rest of them, but I can't start

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• Windows Vista window does not start error 0 x 80004005 and is unable to initialize msoe.dll

  Mail window stop working last week.  At startup, I got error 0 x 80004005 then failed to initialize msoe.dll.  This can be corrected?

  Hello

  You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can reconfigure Windows mail and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Method 2:

  If the previous step fails run the System File Checker tool to troubleshoot missing or corrupted system files.  Follow the steps in the link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For your reference, take a look at the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Windows Defender does not start; WMI repository is consistent.

  My Windows Defender on Vista (home) does not start, and I tried several times to troubleshooting it. I ran the winmgmt/verifyrepository and it always comes back with "repository is constant." So what now?

  Hello

  1. what exactly happens when you try to start Windows Defender?
  2. When was this last work fine?
  3. you did it any hardware/software changes to your computer before this problem?

  I suggest you try the procedure below.

  Step 1: Check if windows defender service is running and set to automatic.

  a. click the Start button.
  b. click Run, and then type services.msc.
  c. now, locate the service named Windows Defender.
  d. Double click to display the Properties window.
  e. set the startup type to Automatic
  f. click apply , and then click Start
  g. click OK , then close Services windows.

  Step 2: Check if the problem persists in the clean boot state.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Step 3: Run to restore the system to a date and a time when Defender windows worked fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.