Vista has stopped showing pictures

Similar Questions

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.

• Satellite A100 - 049 (PSAAR) - registration of Windows Vista has stopped working

  My Toshiba Satellite A100-049 (PSAAR) came loaded with Windows Vista Home Premium.
  On each occasion my computer boot the, "record of Vista has stopped working" message.
  Here are the details of the error message below.
  Anyone have a similar problem or have a solution to this problem?

  Problem event name: CLR20R3
  Problem Sig 01: Toshibaregistration.exe
  Problem Sig02: 023.0.2538.28272
  Problem Sig03: 45801f61
  Problem Sig04: System.Managment
  Problem Sig05: 2.0.0.0
  Problem Sig06: 4536f344
  Problem Sig07: 111
  Problem Sig08: 123
  Sig09 problem: access to the authorization system
  OS Version:6.0.6000.2.0.0.768.3
  Local ID: 6153

  This happens especially if someone install a clean Version of Vista.

  Please call Microsoft. You must activate Vista by phone.
  As far as I know the phone call is free. After that it all works again.

• Error message: check of Vista has stopped working

  ARG.
  After that a few days of use, I get this error:
  Registration of Vista has stopped working.

  This happens every time I restart the computer.
  I tried to look around a gace, but I can not even find anything on the subject.

  Anyone who has got any ideas?

  Great info. Thank you for this

• Vista has stop to connect to my network at boot time.

  Vista has stop to connect to my network at boot time.

  Can connect manually using the command ipconfig / renew, but several of the start up programs are disabled due to this issue.
  Can anyone help?

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  I suggest you to see the links and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

  Network connection problems

  http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

• Windows Vista has stopped working properly

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  "pastafasul" wrote in message News: * e-mail address is removed from the privacy * .com...

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  If you see the icon on the desktop, do a right click on that and then left click on properties. The window that opens has all the information you need.
   
  If no icon, and then start Windows Explorer and right click on computer it followed by the left-click on it.

• Windows Media Player in vista has stopped playing my video files (.) MOD extensions)

  My Windows media player recently stopped playing my video files that have a. Extension of MOD, although the audio is not yet once the video is crushed. When the video freezes a computer bubble lets me know that the driver igfx has stopped working and then recovered.

  I spent many hours trying to solve this problem. My graphics card is an Intell chipset and it is up to date with his driver (I checked), the motherboard is an ASUS and this is far too - I checked. I ran an auto fix and that disabled four codecs, but the problem persists. I have run the sfc / scan now processes at the prompt as an administrator and it came clear.

  The problem is driving me crazy! can anyone help? When I play the video on another computer that works under XP, I have no problem.

  Thank you

  John.

  I fixed my own problem finally - I took this advice:

  http://answers.Yahoo.com/question/index?QID=20081217192010AAFUBeK

  and installed "essentials pack windows media codec 3.2 [32 bit], this source http://www.snapfiles.com/get/essentials-codec-pack.html.

  Job done!

• Firefox 3.5.1 running Vista has stopped working. No error message. Tried to uninstall and install also the latest version and get a message saying that I must first close Firefox (which of course obviously does not work)

  Firefox 3.5.1 running Vista stopped work, no error message. Tried to uninstall and install the updated version. Download the message that I first need to close Firefox, but it is not obviously executed.

  This has happened

  Don't know how many times

  I restored my system to an earlier date, December 2009

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; Dealio Toolbar 3.1.1; .NET CLR 3.5.30729; .NET CLR 3.0.30618; NET4.0C; AskTbWCL/5.8.0.12304)

  Firefox can not run visibly, but is probably running in the background. It is in the Task Manager. To access the Task Manager go to Start and type in taskmgrsearch field. This will open the process task manager. Then go to the tab processes and end firefox.exe. After the end of this process, close the Task Manager and try to re-run the installation/uninstallation.

• Windows Vista has stopped working

  I'm trying to fix my moms laptop that has windows vista on it. I can get it to start very well is not the problem. I can sign and take an account, if I open the Task Manager to get to the desktop. In the contrary case, it freezes on the Welcome screen. The laptop only works in safe mode, but clearly this is not what I want.

  I want to plant restoration of the thing. But he said that I did not restore on the computer points. I tried to go into the Protection system and I can only change the name of the computer. I'm trying to set up the restore point, but it just doesn't work. Can someone please tell me how to plant to restore this laptop until I drive me nuts?

  (The model is compaq presario CQ60 with processor intel pentium dual core, clear of Windows Vista)

  Hello

  System restore points are not a resumption of the plant back to new condition.

  Here's how to do it with a HP Compaq laptop.

  "Performing a recovery of the system HP (Windows Vista)"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00814731&cc=us&destPage=document&LC=en&tmp_docname=c00814731

  Turn on the computer and immediately press the F11 key several times , about once a second, until the Recovery Manager opens.
   
  Or in Vista, use the HP Recovery Manager to reinstall the operating system.
   
  All the information are in the link.
   
  See you soon.

• My Toshiba laptop Vista has stopped reading SD cards.

  It stopped working after the regular update installation of window.  I restored before the update thinking it might work, but it didn't.  The computer does not even see SD cards when you go to start/my computer via windows Explorer.  It is all SD cards and has barely begun to happen. How will I know if it's a windows problem or hardwear.

  Monday, April 23, 2012 08:53:58 + 0000, grafiau wrote:

  It stopped working after the regular update installation of window.  I restored before the update thinking it might work, but it didn't.  The computer does not even see SD cards when you go to start/my computer via windows Explorer.  It is all SD cards and has barely begun to happen. How will I know if it's a windows problem or hardwear.

  See other responses, you got and let me add the following:

  Are the cards that you have tried and that work not all 4 GB or more? If so
  they are SDHC cards, and it is possible that your reader reads only SD
  cards and not SDHC cards.

  And you can buy SDHC USB readers from Amazon.com for as little as
  $1.27 more $.50 U.S. for shipping! I have two of them - one that I keep on
  My office and that I keep in my case of laptop for use when traveling.

  Ken Blake, Microsoft MVP

• Windows Vista has stopped auto update cannot update manually. Used windows 'Mr fix - it' returned error code: 0 x 80040154

  I don't know when this problem occurred. All of a sudden I lost sound on my Windows Vista Business System. In trying to find a solution to this problem, I went to the Microsoft Fix - It Center and downloaded the troubleshooting Fix - It. After insalling the Fix - It store and then you try to run the program an error code indicating: "C:\windows\System32\dssenh.dll is not designed to run on windows or it contains an error. Try to install the program using Intallation to original media or software to support provider or system administrator. "before you begin to solve the problem, as well, I decided to create a restore point, then I went to windows update and had an error code: 802440F when you try to update. Go to the Microsoft site and then try to download the updates manually it immediately opens the automatic update dialog box and activating returns the same error code: 8024402F. After reading the list of error codes, the closest codes of this number were 8024402C and 80244022

  and the main board seems to rerun the update with the firewall shutdown, then restart the firewall after the download. I did this and still have not solved my problem. I think I have a sound card problem, but would not interfere with the automatic windows update. I then tried the option repair on windows vista drive still no luck.

  Hello

  I had the same problem and I tried the steps in the following article and it worked for me.

  http://support.Microsoft.com/kb/900936

  http://support.Microsoft.com/kb/883821

  http://support.Microsoft.com/kb/836941

  All the best!

• My HP pavilion DV7 1245 x with Vista has stopped recognizing the CD.

  When I put a DVD/CD player and click on the disc or the player open, it is said, please insert the disc in the drive.  When I put a CD inside whirs for a little while but when I put a DVD in nothing happens at all.  When I ran FixIt it says fair-media is not readable, but I tried all kinds of DVD and none of them work. Can someone help me establish the popular terminology? I already deleted and reinstalled the driver several times and run Fix It twice. Thank you!

  Hello

  Check the diagnosis with the help of HP, their documentation online, and ask in their forums
  on known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================================

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why some of my windows vista has stopped working on the main account.

  Help and support fuction no longer works. When you try to use help and support in the start menu, I get the error that this program under constrution. This works very well in my seconcary accout. This is for help and support, which is in the start menu. When the short cut is clicked on the window opens and the message appears indicating that the site is under construction?

  Hi, James.

  You can try this fix-
  Trouble Windows Vista Help & Support

  http://www.Windows-now.com/blogs/kmkenney/archive/2006/11/25/fix-Windows-Vista-Help-and-support.aspx

  or right-click on command prompt and select run as administrator

  Type the following regsvr32 msxml3.dll

  Press enter

  I can not open Help files that require the Windows Help program

  http://support.Microsoft.com/kb/917607

• up-arrow fn brightness Vista has stopped working - do I need a driver

  When I bought my laptop, the function and arrows up and down function. I don't know if I've lost an icon in my control panel but can't find a way to change my laptop monitor brightness. the laptop is the samsung and the vista operating system

  Download and install 'Easy display Manager'
  Function keys do not work
  http://support-us.Samsung.com/Cyber/popup/IFRAME/pop_troubleshooting_fr.jsp?IDX=122098&modelname=&modelcode=&session_id=N4c4v7bCyMZnyb12JMgPN4Q7PDnYmj7ZW6T77vWrGr66yJFp1CTH! 1486321367! 1761676444! 7501! -1! 779666559! 1761676348! 7501! -1! 1299717304059

  DOWNLOAD:
  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=1401&prd_mdl_cd=NP-NC10-KA02UK&prd_mdl_name=NP-NC10&srchword=NC10

• Windows Media Player (32-bit Vista) has stopped working. It does not open when I click on a file that uses or from the main menu. I tried to download and re - install, but get the message "you already have the latest version of Windows Media Player.

  Windows Media Player does not work for music or videos (Vista)

  Hi Palmdoc,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  You cannot uninstall and reinstall Windows media player in Windows vista, because it is integrated inside the operating system.

  This problem occurs because the Windows Media Player library database is corrupted.

  See the below Microsoft article and try the steps mentioned, check if it works.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.