Vista Home PGD does not stop

Similar Questions

• Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

  I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

  Hello

  It's a normal reaction after replacing the hardware that you have replaced.

  The hard drive with the installed operating system contains the old motherboard drivers, etc..

  They must be replaced with the new motherboard, drivers etc.

  You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

  To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

  See you soon.

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Premium does not see my HDV camera

  I recently bought a Sony Z5U HD camera and tried to connect to my Vista Premium 64 bit laptop.  Windows don't "bong" and recognize that anything that either is connected. If I plug an older camera, it works fine as it should, so I don't know that the firewire connection works correctly.  In addition, I plug the same new camera to a tower of XP and it works fine. I contacted Sony and they said that Microsoft has not added 64-bit cameras HDV codec on Vista 64 and I should downgrade the operating system to 32 bit, which sounds extreme.  I googled for the 64-bit codecs, and everything I can find relates to play a variety of file types video in Windows Media Player, which seems CLOSE, but not quite accurate that I know this might solve my problem.  There are codecs that I can install to allow my HDV camera to be recognized by my Vista Home Premium 64-bit OS?

  I recently bought a Sony Z5U HD camera and tried to connect to my Vista Premium 64 bit laptop.  Windows don't "bong" and recognize that anything that either is connected. If I plug an older camera, it works fine as it should, so I don't know that the firewire connection works correctly.  In addition, I plug the same new camera to a tower of XP and it works fine. I contacted Sony and they said that Microsoft has not added 64-bit cameras HDV codec on Vista 64 and I should downgrade the operating system to 32 bit, which sounds extreme.  I googled for the 64-bit codecs, and everything I can find relates to play a variety of file types video in Windows Media Player, which seems CLOSE, but not quite accurate that I know this might solve my problem.  There are codecs that I can install to allow my HDV camera to be recognized by my Vista Home Premium 64-bit OS?

  ==========================================
  Wow! It's a camera! You may want to consider
  a more advanced program for your video editing.

  Here's a possibility:

  Sony Vegas Pro 9http://www.sonycreativesoftware.com/vegaspro

  No guarantee... but maybe the following codec pack
  worth to try:

  * Proceed at your own risk *.

  K - Lite Codec Pack 64-bit
  http://fileforum.betanews.com/detail/KLite-codec-pack-64bit/1094057842/5
  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  Windows Vista-
  System Restore:
  Frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Vista Home premium does not start correctly

  My computer vista laptop worked fine for two weeks then started having a lot of problems.
  Programs ceased work and the report of windows and kept solutions problems popping up, I think I have more than 40 unresolved issues.
  So if I haven´? t been on the laptop for a while, I start the blue screen of death and won´? boot t 20 minutes because it is proposed running a reboot each time due to the blue screen. I put the computer several times and still have the same effect after a while.

  I think that this could be a software issue more then a hardware problem but I don´? t want to go back to windows XP.
  I have can´? install service pack 1, when I try and install it says there is an internal error.
  I don't know how to solve my problems to initialize any ideas?

  Because it's wasting a lot of time, I don't know if I need to return my laptop

  Thank you

  Hi mate,

  These questions - and especially a BSOD - aren't very good signs of a healthy system / machine. Recently installed a few new applications or something else?

  OTHERWISE, I guess some hardware failures (memory, motherboard), because these problems appearing out of nowhere are probably based material and not really software Unetelle...

  If you have really formatted your HDD several times and nothing has been solved after re-installation of the system, contact a [service | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] send the machine for them and allow them to check your machine on the malfunctioning of the equipment. You have a warranty, so please use it.

  Welcome them

• Vista Home Premium does not recognize a new 500 GB HARD drive.

  I installed a WD 500 GB drive in my Emachines computer.   He appears in "Device Manager" who says it works correctly, but the OS not the poster not in 'My Computer'.  Is there a limit on the size of the disk in Vista?

  Have you partitioned/formatted it?

  If not, right click on computer > manage > storage > disk management.

  Now right click on the graph for the reader, and select new simple volume. Allocate the amount of space you want to use it, i.e. all or certain of them so that you can have more than one partition on the disk. Now do a right click and format it. Repeat the new simple volume if you decided to make several partitions.

• Windows Vista Home Premium does not start when I turn on the computer. Ctrl alt del does not work

  Windows Vista premium edition hung up in judgment and now I can't get windows to boot at all.  I just get a blue screen that says Windows Vista.  What should do?

  Hello

  You are able to access the menu start pressing F8 as soon as the initial POST ends and before Windows starts to load? If so, try the last known good configuration. Otherwise, follow the steps here to load the recovery environment: http://support.microsoft.com/kb/927525 and then run rstrui.exe to load the system restore. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Dell Dimension E521 Windows Vista Home Premium does not start

  My machine is more initializing. Nothing appears on the video monitor!

  The lights at the front (1, 2, 3, 4, and sighted business disc for HD and DVD players) flash as if it is starting.

  I put in the DVD Dell to reinstall Vista, without any difference.

  Any suggestions?

  
  

• After the online PC, Vista Home Help does not start, difficulty goes to the window, then once outside.

  I made a safe mode and removed the Trojan horse, I don't know how this forum works, so I won't be a gene, sorry.

  Is this the same computer as in this thread more early of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/how-can-i-change-the-black-color-at-the-top-of/820b0374-5652-e011-8dfc-68b599b31bf5

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

  October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

  () 19791428 fix / p19791428)

  
  

  Our process for patching Oracle 11.2.0.3 GI has not changed for many patch cycles. But I have a few questions about the PSU process October 2014 "Combo" GI which includes OJVM. We will test on the instances of laboratory first, but I wanted to see if somebody beat us to the application of this power supply and can share an overview.

  Our environment:

  Oracle grid Infrastructure 11.2.0.3.11 (no CARS; used only for ASM / Oracle Restart)

  11.2.0.3 multiple databases of instances per unique host (Redhat Linux x 86-64)

  We always manually stop EM agents then changed directory to the level root the dir containing the decompressed PSU and run opatch auto - and run as root, if system administrators grant us temp privs root on a given day. Then:

  opatch auto/home/oracle/patches ocmrf - /u01/app/11.2.0/grid3/OPatch/ocm/bin/ocm.rsp

  For post-install, restrict us the stopping, starting, run catbundle.sql, and then 'change the system disable restricted session.

  Fast forward to October 2014 GI Combo PSU just released, README Section 'Installation of the patch 2.4.

  Step 1: bring down the database on all nodes using the "svrctl stop database...". ». First of all, we will never that. What is a RAC only step? "opatch auto" always stop all Oracle services necessary for us, with the exception noted above, agent of the EM. Don't skip us this step for a GI but not RAC configuration? Again, we use only of GI for ASM.

  Step 2: cd in a patch numbered directory (in this case, < patch Home > / 19791428). A bit different than before, but not confusing not.

  Step 3: opatch auto apply - ocmrf < com answer file full path >.

  Significant for adding 'applies' here in auto opatch syntax? Maybe it was always there, for example July 2014 patch cycle, and I never noticed...

  Step 4: cd to a subdirectory of the directory of numbered, for example < patch Home > patch/19791428/19282015

  Step 5: patch OJVM apply:

  opatch apply - local

  "Affixes Opatch - local" also run as root?

  Step 6: repeat step 2 to 5 on all nodes; Since we GI but no CARS, so there are no other nodes.

  Step 7: the last node, elevate dbs on all nodes via 'svrctl start the database '. Believe that we would skip because we are not CARS.

  Go to Section 2.5.2: loading modified the SQL files in the database

  1. start each instance then run @postinstall.sql - what is new. It seems also new on him must START each instance. In our last round patch "opatch auto" always showed all Oracle services, including any proceedings. So before our catbundle.sql, we run generally restrict us the stop and then start. "Opatch" behave differently for for example not restart us during this cycle of fix, all Oracle services when you are finished?

  2. run catbundle.sql for each instance; par for the course.

  Thank you.

  Dana

  
  

  I made the correction today. The statement does not.

  as root, do 1,2,3

  as oracle do the rest.

  should be automatic without apply.

  hope this helps.

  HP

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.