VISTA INSTALLATION PROBLEM RE. MS OFFICE HAS DISAPPEARED

Similar Questions

• Color problems: the red color has disappeared from my computer

  Original title: color problems

  The red color has disappeared from my computer. The moniter is ok.

  Hello
   
  You did it changes on your machine before the problem?
   
  It could be a hardware failure.
   
  Things that can be loaded are listed below:
  
  broken monitor cable has...
  b. defective monitor.
  c. faulty graphics card.
   
  You can consider measurements:
   
  Step 1:
   
  Double check that monitor cable is firmly attached. Try the Wiggles, see if the color returns.
  Step 2:
  
  Test another monitor on the PC (Personal Computer), and/or the monitor on another PC.
  Step 3:
  
  You may have a bad cable, or the monitor may be defective.
   
  Step 4:
   
  Right-click on the desktop and select Properties. Go to the tab settings, and report on what choice was filed under 'Color quality' and what is the other choice in the drop-down list?
   
  If there is no choice of color quality better than what you have, you may not use the correct driver for your video card or monitor.
   
  Uninstall and reinstall the drivers for video card and see if the red color appears.
   
  Follow the steps in the link to uninstall and reinstall the video card drivers.
  http://www.Microsoft.com/windowsxp/using/Setup/support/driver.mspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• positions 32-bit Vista installation problems

  Mr President
  
  I installed newbie.i 10 gr 2 in my vista, but sometimes his departure perfectly and sometimes not. Then I have to restart my machine and then only I get access in sql * plus.i have posted here but the problem is always the same. [post installation problem its not solved still | http://forums.oracle.com/forums/thread.jspa?threadID=930824 & tstart = 0].
  
  When the bellows maintained command isn't leaving no output at all.

  emctl start dbconsole

  IN the function panel shows dbconsole status as a server starting at only.
  
  What should do?
  
  
  
  concerning
  Chrystelle

  I do not know I hope that any interpretation (put) the OS environment that you provide. Your best bet is to look at the documentation.

  http://www.Oracle.com/pls/db111/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides

• Vista installation problem

  I recently had a hard drive on my Vista crash.

  I bought a new hard drive and began to install vista on it.  Whenever he develops the files copied to my hard drive, it freezes.  I tried so many times and it always freezes during the stage of expanding files.

  Does anyone know a way around this?

  Unplug everything except keyboard/monitor / mouse ther.

  Here's how to do a clean install:

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• During an update to Windows Vista, my office has disappeared with the task bar and start menu.

  I can only access my and other programs through the Task Manager.  I have tried troubleshooting, I restore my computer on the eve of what has happened, but nothing helps.  Any ideas?

  Hi cthodges

  Thank you for using the Microsoft Answers Forums!

  I would like to ask you a few questions to help focus in the right direction:

  Are there other specific details that you can provide that will help us understand and solve your problem?

  We can try a few steps and check if it works:

  Run explorer.exe from the Task Manager > new > task. If the start menu reappears, it would confirm the cause.

  We can now perform the following steps:

  Step 1:

  Run an on-line analysis of your PC of malicious software:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  Windows Live OneCare safety scanner is an online service that lets scan you your computer to protect yourself, clean and operate at its best. Use our free protection scan to check and remove viruses, spyware and other potentially unwanted software and to find vulnerabilities in your Internet connection.

  You can also run Anti-Malware on your computer. Follow the steps in this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2:

  To use a boot option, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  c. when the boot menu appears again, and the words "Safe Mode" appear in the bottom, select the installation that you want to start and then press ENTER.

  If it works fine in safe mode, infer you that all third-party programs are causing the problem.

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  S tep 3 :

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  See this link for more information:

  http://support.Microsoft.com/kb/936212

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista installation problem: path has no %APPDATA%\

  Whenever I try to install anything, such as MSN Live messenger, Skype, or update the latest version of iTunes, I get an error.

  He now tells me that the installation could not be completed because the path is % APPDATA%\.  I really have no idea what it means.  But he told me the Installer failed because another program blocks.

  My update does not work and I think it's been a while since my computer had any appropriate updates.  I read through many messages forums and tried about everything except to reinstall my operating system that I really want to avoid.

  Please help me with this problem!

  Hello

  Have you tried the utility install cleanup?
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  It allows to clean the remnants of the most recently installed software. This should help to clear the error message. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have Vista installation problems

  I bought Vista Ultimate in March 09, I bought a seagate Barracuda 500 g to install it on.
  Aiinstalle it ok andcommenced transfer my files a few days later, my new hard drive crashed with vista and all my files. I bought a new drive 650g go digital and decided to install vista again, this time in 64 bit (no mistake no drivers for my sound card after spending a week sent to the sites of the manufacturers to get the last 64 drivers, I gave up in disgust, I have now returned and installed vista 32 on digital weston.)
  My mow question is that vista is going to blow up my new drive (it has a compatibility issue with the large capacity disks.)
  can I use a program to drive to make it easy for me to up grade my drivers?
  can I get a registry cure for vista Microsoft does have a list of compatible service programs available.

  To go to 32-bit to 64-bit, you will need to reformat and do a clean install. (Although it sounds like you have already reinstalled Vista)

  This means backing up your data in first place, Windows installation, drivers and all updates. Then install your software.

  There is no problem of compatibility with the large capacity disks.

  You will need to install fresh 32-bit drivers.

  What do you mean by 'save the cure for vista?

  What do you mean by 'service programs? If you mean that security programs, as far as I've seen that all modern security programs are compatible with Vista 32 bit.

  Here is the link for compatibility - http://www.microsoft.com/windows/compatibility/

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• Vista installation problems

  I have a Pavilion a6334f running Vista 32 bit.  I ran into problems with the Western Digital hard drive and replaced one in October and now do the same thing in December/January (replacement of WD drive showed error.).  I had HP recovery discs that I used in the OCT reinstall.  (The game I did when I first bought the machine does not).  I used these to recreate the initial installation of the machine.  The process is going well, but met an obstacle at the end of the installation.  He stopped with a message "Windows Setup could not configure Windows to run this hardware.  It's strange because it's the same drive I ordered from HP to reinstall, I had to do in Nov.

  Well, I've tried decided to try a reinstall with recovery disks that I created on this same machine.  (These were created after that I got the machine in Oct.)   This time I got the OS installed and working, but now Windows will not update.  I get an error message which is a Code 8024 A 000.  Nothing seems to work to solve this problem either.  The operating system seems to think that it was updated on October 19, which is probably when I started the installation on the first hard drive.

  Any ideas?  Start with either scenario.  Scenario 1 I used an HP provided set of disks.  Scenario 2, I used recovery disks that I created on this machine.

  I fell on the fix.  It turns out that I needed to install a newer version of the Intel storage driver version 9.6.0.1014 for my machine.  The site of HP had only version 8.6 on it.  Once I put that on the updates started working.  I remember seeing errors in my log windowsupdate that indicate an error of data store, so I guess this should be a tipoff.  Intel has a utility that you can download that will show you the good update.  Someone had suggested earlier the upgrade to version 10, I think, but that did not fix the problem.

• Satellite P300-27 t - Vista installation problem

  Hello

  I just got a satellite P300-27 t, which came with Vista Home and I wanted to install Vista Ultimate instead.
  He had 3 partition (labeled WinRE, Vista and data).

  Then I backed up everything (never even connected on this version of Vista Home never), deleted the first two partitions and has started to install Vista Ultimate, the beginning of the installation worked fine but it failed all of a sudden with this message:
  "Windows cannot update configuration to start the computer. Installation cannot continue. »

  An idea what is causing that and how do I get around?
  I must be missing something obvious here, but it can't know. Sorry if that's one of the questions that opens every time here, but I have not found my installation.

  Thank you very much in advance.

  David
  PS: I restore my pc now

  Post edited by: Enzo

  > I want to put my Vista CD in the drive, start with him and then install Vista
  The point is that you can do this without installing SATA drivers!
  Books supports the new SATA controller and the driver is not part of the operating system, and therefore you must first install it.
  You need the Intel storage Manger.
  Check out the Toshiba driver page!

  However, you can set the compatible SATA to AHCI mode and you can install Vista without driver SATA need.

• MS OFFICE HAS DISAPPEARED

  I DOWNLOADED MS OFFICE LIVE FROM MRS SO HOW TO GET TO RE INSTALL WHEN MY PRODUCT KEY OF THIS MS FORMAT DEFERRED DEMAND ON THEIR WEBSITE TO HELP? I DO NOT HAVE A DISK. MS HAVE BEEN UNABLE OR RELUCTANT TO ANSWER THIS QUESTION THE YEAR LAST

  Try their ccontacting telephone customer support group at the following: http://support.microsoft.com/contactus/cu_sc_replace_rrr_master?ws=support#tab2.  They should be able to help.  There is no free downloads of other editions of the trial of office software.  I don't know why your Produxt Key does not work on their website to help, but it provide you it for people who respond to your call they maybe able to help.  You need to deal with them - we can really help in this forum.

  Here's an article on replaing Microsoft software that may be useful: http://support.microsoft.com/kb/326246.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PageMaker 7 Vista installation problems

  I try to install PageMaker 7 in Vista Home Premium, and used to install driver driver Postscript and ODBC as they crash in the middle of the installation. The main program of Pagemaker 7 installed (and has been updated) and Acrobat Distiller and ATM Lite. Any suggestions as to the importance that they are and what is required to install. A second question is what do you do with the second installation disk, it is never asked. Dave138

  H is not supported under Vista. PM 7 is 8 years old now.

• 10g on Vista installation problems.

  Hello, I am a student and I bought a copy of the database to Oracle 10 g Release 1 for Microsoft Windows for a class. When I try to install it on my computer which uses Windows Vista (I think that Home edition) it gives me this message in the cmd prompt:
  
  _____________________
  
  From Oracle Universal Installer...
  
  Verification of the requirements...
  
  Checking the operating system version: must be 4.0, 5.0, 5.1 or 5.2
  real 6.0 has no < < < <
  
  Exit Oracle Universal install, journal for this session are in < location >.
  
  Please press ENTER to exit...
  _____________________
  
  Any advice would be greatly appreciated.
  Thank you
  User10837588

  10gR 1 is not certified for Windows Vista.
  http://download.Oracle.com/docs/HTML/B10130_02/reqs.htm#CHDHGGFE

  Certified for Vista version are gr 10, 2 and 11g.

  You can try 10gR 1 on Win XP Professional or download 10 gr 2.

  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10203vista.html

  or

  http://eDelivery.Oracle.com

• Network Tecra M9 Vista installation problems

  Hello

  Have just got a Tecra M9-136 that I try to install with the English version of Vista Business.

  Vista refuses to connect to several websites:
  Update.Microsoft.com
  www.Microsoft.com
  www.Intel.com
  LiveUpdate.symantecliveupdate.com

  The links below works well even if:
  support. Microsoft.com
  www.Dlink.com
  www.LinkedIn.com
  www.VG.no
  www.Aftonbladet.se

  Someone else who have encountered this problem?

  Update;
  Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  KR,
  Björn? A¶RN Hasselberg

  Post edited by: bhasselberg

  > Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  Happy info. Thanks again for this information!

• My office has disappeared that I still have some toolbars and quick launch and commissioning

  OK my desk top seems to have disappeared I still everything

  Hello NormaRawlings,

  Please take a look at the key explorer in the registry to see if it contains a value that will hide the office.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Start > type Regedit

  Click on continue in the UAC window

  Navigate to the following key

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Search for a value in the right pane, called NoDesktop.

  If it exists and its value is set to 1, then change its value to 0.

  Conclusion of Regedit.

  Restart the computer.

  Please note that these measures were according to Smittychats post at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-disable-desktop-icons-forever/52d0932a-175C-4B48-982d-3022d388b730?page=1&msgID=4d03424b-594f-4e19-b7fd-604057ff5d4e

  Let us know if this can help, or if you have any questions.

  Best regards

  Matthew_Ha

• windows vista installation problems, someone please help

  Recently I bought windows vista home basic CD and when I goto install it I have inseet the second drive and is says file corrupt or missing someone can help?

  It has a product key

  "but he is registered."

  We can only go on what YOU tell us!

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner