Vista Sidebar a dll error

Similar Questions

• In Vista, get a DLL error on reboot, 'error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll. The specified module could not be found.

  On reboot, I get a RunDLL message "error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll.  The specified module could not be found.  How can I fix?

  Hi MelP1802,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the mention of steps in the Microsoft article and lets us know if the question get it fixed.

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3: Also I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information helps.

• Dragon Naturally Speaking v10 hangs Word 2007 on Vista Home Premium 64-bit (dgnword.dll error code: 0xc0000409)

  Dragon Naturally Speaking v10 hangs Word 2007 on Vista Home Premium 64-bit (dgnword.dll error code: 0xc0000409).  It worked fine for a few months, but then started crashing Word 2007 as soon as it says "loading... dictated." ».  I have uninstalled/reinstalled Dragon; same accident.  Uninstalled/2007reinstalled office; same accident.  Did anyone see the problem?  Any ideas on how to track it down?  Technical support in the shade had some ideas.  I don't know if it's worth to call MS tech support since it may not be a problem of Ms.  Thank you.

  Hi Rrobinson3,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS Office and would be better suited to the Office Online community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• only NTDLL. DLL error apply to Windows NT? I use Vista and should I NT?

  I get the NTDLL. DLL error message when I try to play Neverwinter Nights on Vista... I just noticed that I have a Windows NT file so if I am running Vista, can I get rid of Windows NT, or do I need to keep it for some strange reason?

  Hello

   
  NTDLL. DLL is not a Windows NT file, is a file system of Windows Vista. NT makes reference to new technology that Microsoft has adopted the Windows Vista operating system.

   
  Method 1:
  
  Run the System File Checker. Use the following link for assistance with the execution of the audit tool.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  
  

  To analyze the logs generated by the System File Checker, see the link below.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228
   

• i5 dll error appears when I play sims 3

  i5 dll error appears while I am playing sims 3.  What this has to do with my driver?  because to think that I remove the covers and I don't know how to do this.  My operating system is Windows XP Home Edition and I have a Dell Inspiron b130 laptop.  Help, please!  I have a mobile chip intel 915 GML video graphic card/card of value.  It's a crazy old woman... from 2006

  Hi Organist4ever,

  Welcome to the Forum of answers Windows Vista.

  To delete the cache file, follow these steps:

  Cache files are temporary files that are saved by the game to make some faster loading information. If these files have incorrect data or damaged, it can prevent your game from loading. The game will regenerate fresh copies of these files whenever it loads, in order to remove them are perfectly safe, and it is normal for them reappear.

  1. to delete your cache files, open your MY documents Arts\The Sims 3\. Inside there will be a number of cache files:

  CasPartCache.package

  compositorCache.package

  scriptCache.package

  simCompositorCache.package

  Delete all those files you have.

  2. also look in the folder MY documents Arts\The Sims 3\WorldCaches\ (if you have one) and delete all the files inside this folder. Don't worry if you don't have a record of WorldCaches , or if it is empty - some people have WorldCaches and not others.

  Please let us know if it helps.

  Thank you and best regards,
  David

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Major problems wow64win.dll errors

  Hi, I would really appreciate any help!

  I have big problems

  A couple of days, I turned my computer on vista 64 bit ultimate. Not had any problems recently. During startup, I got a blue screen of death and crash dump. I panicked and turned off my computer.

  I tried to restart my computer but vista stuck in a loop on loading and kept restarting itself.

  I then tried to boot from last good configuration known but always kept rebooting.

  Then, I decided to start from my vista installation disc and intended to restore for a few days earlier. However I think I've accidentally pressed repair startup instead. When retrieved and loaded vista, I had some dll errors. Then the charge of vista without applications will work and whenever I try to open a program I get an error of wow64win.dll. and the program does not open. I did some research and understand that the wow64win.dll is the emulator that allows 32-bit applications running on 64-bit systems.

  Then I tried to restore to a previous safe time using the installation disc, but when I choose an earlier date of the restoration, he begins to restore then comes up with an error saying cannot restore.

  Even my 64-bit browser explore won't acess the net (currently using another computer). Strangely, the only thing that can currently access the net is winmail. I can't access all windows processes, but no applications or programs.

  I currently have the pack1installed service

  Should I try new disc loading service pack1 or something in order to repair the problem .dll files that I really want to reinstall and I wish I had manually back up all my files on an external hard drive

  I hope someone is able to help me please. Thank you desperate waiting

  Hello, buddyfox

  If you cannot restore or repair your installation of windows, you can try to do a clean install.

  WARNING: Formatting the hard drive will all scan data, programs and user settings you have on the computer. If there is no information on this computer and you don't want to lose, or is not guaranteed, you will need to make backups before proceeding with the INSTALLATION of FORMAT / CLEAN.

  Before you perform a clean installation, first create a backup of all files. Locate your Windows Vista product key, this is usually on a sticker located somewhere on your computer. Locate your Windows Vista support, if you don't have a CD, there may be a restore partition, you will need to check with your manufacturer.

  For the steps to perform the clean installation, please see the following link: http://support.microsoft.com/kb/918884

  Let us know if it helps or if you need further assistance.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll__The specified module could not be found.

  I get the next message after starting my machine.

  RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll

  The specified module could not be found.

  PL. help me to remove this

  Rahul

  Hello

  Don't forget there is no program can detect or remove all malicious software, so you need to be thorough. Added easy
  to detect and remove malicious software is often accompanied by a much harder to detect and remove the payload. Do
  redundant and thorough work and then use the cleaning methods even if nothing was found. Better to be
  very careful now than to pay a high price later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• To sttartup error 'loading\3\dlcxtime.dll run.dll error. "

  Original title: ERROR LOADING \3\DLCXTIME. DLL

  When I start my computer I get this error message: RUN. LOADING\3\DLCXTIME DLL ERROR. DLL HOW TO REMOVE THIS

  Hello

  You did changes to the computer before the show?
   
   
  DLCXtime.dll is part of the Dell printer drivers.
   
   
  Method 1:
   
  Step 1:
  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
   
   
   
  Step 2:
   
  Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
   
  Method 2: Uninstall and reinstall the printer and see if that helps.
  Reference:
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• audioeng.dll error message check out iTunes or any program that uses sound

  audioeng.dll error message on Windows Vista 64

  Here is the still unresolved audioeng.dll error message during the startup of iTunes or any other program that uses sound:
  "C:/windows/system32/audioeng.dll is not designed to run on Windows or it contains an error.
  Updates to Vista 64, probably after one of the windows

  have not found a solution yet.
  Please answer if you know the answer to that.
  Thank you.
  -i.

  Yay!
  I fixed it!

  Here's how:
  I looked at the advice of Robert (thanks Robert!) and thinking that it is must be a typo - 64-bit should be Wow, not sys32, just hypothetically.
  So, I checked my Wow folder and found 0 bytes audioeng.dll there as well - I didn't replace yesterday with snached dll, I only replaced front sys32. The same dll is used twice by the system.
  I decided to take the risk to replace with the same dll snached.

  Here are my steps:

  1. Tear off the healthy donor machine DLL
  2. Start the bulb--> cmd with admin permissions
  3. in the command prompt writing
  • takeown /f C:\Windows\SysWOW64\AudioEng.dll
  • ICACLS C:\Windows\SysWOW64\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\SysWOW64\AudioEng.dll
  • takeown /f C:\Windows\System32\AudioEng.dll
  • ICACLS C:\Windows\System32\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\System32\AudioEng.dl

  Make sure you did it in both places.
  Enjoy!

  Thanks a lot for all help.
  I really appreciate it.
  -Irena.

• I get dll error at startup messages, slow down my computer. Files that cannot be found are buzixu.dll and grfamsg.dll

  Files that cannot be found are buzixu.dll and grfamsg.dll. The operating system is vista.

  Thank you.

  * original title - Hi, I get dll error at startup messages, slow down my computer.  Does anyone have ideas how they could be fixed. Thank you very much.*

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Vista blocks CI.dll

  Hello

  I have dell window vista.

  My computer restarts itself last night (think it's after an update)
  at the restart there is a blue screen saying that windows could
  no restart and a Ci.dll error.

  Now I can't access the other methods of repair restoration of the system is such that it
  go directly to the commissioning of repair screen guard.

  It does not start in safe mode.

  Please see this web album for details. It does not start on safe mode any more.
  https://picasaweb.Google.com/113837709185924048391/WindowVistaPremiumCrashesNeedHelp

  Hello

  Since you are unable to start safe mode, you must start from the Installation of Windows Vista disc, or you can check if you have built to the recovery option to fix your computer. If so, you can boot from that and try to repair the boot and system restore and check.

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• does anyone know how to stop execution winkml32.rom DLL error at startup?

  I am running windows vista, the windows at startup I get a DLL error run: winkml32.rom

  I think it's something on the registry values, but Microsoft Safety Scanner and Registery Mechanic cannot find something wrong while parsing.

  Thanks in advance.

  What this site said it is malware: http://www.exterminate-it.com/malpedia/file/winkml32.rom, if both programs that you used did not help then download malware bytes from: http://www.malwarebytes.org/products/malwarebytes_free install and put to update, then run a full scan. This should take care of it.

  I hope this helps.

  Jim

• Accumulated DLL error at startup

  Whenever I turn on my computer, run two DLL error messages appear as follows:

  Error loading C:\Users\Erica\AppData\Local\uvuvadejuzakax.dll

  The specified module could not be found.

  Error loading C:\Users\Erica\AppData\Local\KBDTRESD.dll

  The specified module could not be found.

  I made a scan sfc and appears the following:

  Administrator: command prompt

  C:\Windows\System32>sfc/scannow

  Windows resource protection found corrupt files but was unable to solve some of them.

  Details are provided in convertible bonds. Log windir\Logs\CBS\CBS.log for example

  C:\Windows\Logs\CBS\CBS.log

  Can someone help me with this problem please?  What should be my next step?

  Thank you

  Erica

  Hello

  Once you are sure you are clean and that you have completed the cleaning listed above:

  To remove the error message - its probably requested in your startup group.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.