Vista SP1 install fails - error 0x8007000D

Similar Questions

• Problems with Windows Update on Vista SP1 32 - bit Error: 0x8007000D

  Two updates have been failing install for me for several weeks. I finally decided to try to understand what is happening, and I'm stumped at this point.

  The updates are:
  Update cumulative security for Internet Explorer for Windows Vista (KB969897)
  Internet Explorer 8 for Windows Vista

  These two with an error code of 0x8007000D

  I tried almost everything I can think of, scanned for virus/malware, scandisk, verification of the SFC, several difficulty different sound of Microsoft, I even cleared out / reset Windows Update with several different methods and has run the system preparation tool.

  Then, I tried to install Vista Service Pack 2, perhaps thinking that might help - would not install either.

  The ie8_main.log contains the following:

  00:00.249: started: 2009/07/21 (A, M, J) 22:15:46.875 (local)
  00:00.281: time Format in this newspaper: MM:ss.mmm (minutes: seconds.milliseconds)
  00:00.312: command line: 'C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe' /wu
  00:00.468: INFO: checking for C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe version: 8.0.6001.18702
  00:00.561: INFO: Package Installer Mutex acquisition
  00:00.593: INFO: operating system: Windows Workstation: 6.0.6001 (SP1)
  00:00.593: INFO: Vista the operating system detected. Service pack major: 1, minor SP: 0, name of Service pack: Service Pack 1
  00:00.608: INFO: check if you have installed the battery update service
  "00:00.608: INFO: SSU version regvalue found: ' 6.0.6002.18005.
  00:00.624: INFO: Servicing stack update found. Permanent installation
  00:00.624: INFO: check the prerequisites
  00:00.639: INFO: met prerequisites: Yes
  00:00.639: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.655: INFO: C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.671: INFO: check if s iexplore.exe version current is between 8.0.6001.0...
  00:00.671: INFO:... .and 8.1.0.0...
  00:00.686: INFO: version Maximum on which to run IEAK branding is: 8.1.0.0...
  00:00.686: INFO: success check iexplore.exe version. Proceed with the installation.
  00:00.702: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.702: INFO: version for C:\Windows\system32\mshtml.dll check: 7.0.6001.18183
  00:00.717: INFO: version for C:\Windows\system32\wininet.dll check: 7.0.6001.18148
  00:11.481: INFO: EULA accepted
  00:11.497: INFO: user successfully completed the scenario WU. Exit with return code 322376503 so WU will install IE8
  00:11.497: INFO: install return value: HR = 0 x 13371337
  00:11.513: ERROR: installation exit code: 0 x 13371337 (Undefined error Code).

  and the CheckSUR.log file contains the following:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6001.22375
  Package, Version 5.0
  2009-07-21 20:03

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.
  (f) CBS registry 0x8007000D Package_1_for_KB944533 error ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR enumeration child package failed, index: 9

  Verification of the packets.

  Control components store

  I tried to remove the KB944533 and get an error. I have also tried to install a copy of the KB944533 but told me that it wasn't the version appropriate for my version of Windows.

  I am at a loss and no longer know what to check. I guess that there is a corruption in the registry (or system files) associated with KB944533, but I can't figure out how to get the installation routines for give me more detailed information.

  Any help would be greatly appreciated. While my PC is functional and I have no other problems with it, I would like to be able to try IE8 at a given time.

  Thank you
  -Al

  Success!

  I finally understood what was going on. This is a damaged registry entry.

  The registry entry for the key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing\ComponentDetect\x86_microsoft-windows-ie-setup-support_31bf3856ad364e35_0.0.0.0_none_e9aaaad1a6a385a4

  content, which was supposed to be a string value entry for:
  Package_1_for_KB944533 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR

  Unfortunately, it was not of type "REG_SZ" but altered with a type of
  0 x 40000001, which was identified as a binary key.

  I could not initially remove/change the key, therefore, found some instructions on how to reset the permissions on your registry using a Microsoft tool called: subinacl

  After the race I could rename the bad registry entry and add it back in manually, by giving the appropriate string value.

  Now, I was able to install IE8, so I think everything is resolved. Going to update to Service Pack 2 for Vista soon.

• error install Vista sp1 installation file Windows6 0x8007000D. 0-KB936330 - X 86

  Hello

  I use a vista home basic windows which was preinstalled on my computer laptop compaq presario to THE V6608 that I bought in January 2008. Recently, I got my laptop to its factory settings. After that I tried to install the full windows vista sp1 update patch (. Windows6 0-KB936330-X 86-wave0) which was about 434 MB in size. whenever I do, I get the error message "there are internal an error 0x8007000D" as directed by the support page from microsoft on that I installed the microsoft update scan tool that is also a updated and uninstalled my antivirus software and tried again. I still get the same error. Can someone help me with this?

  See...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800b0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Your first post was unclear: I thought you were trying to install SP1 manually (after downloading the Setup program), not via Windows Update.

  When you reinstalled Windows, the free trial of Norton would have also been reinstalled (but not valid, of course). Do you have (1) uninstall the Norton free trial once again and then (2) download/run the Norton Removal Tool before you (3) reinstalled NOD32? [Yes/No]

  Remember: you can always open a free support incident. See my previous response.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Ive tried to install Vists SP1 and get error 800F081F

  Ive been trying to do that, because it came out... and no one has been able to help solve it. If someone had this error? As you can see I asked this question 2 years and still nobody has been able to give me a solution.

  Hello

  you are posting in the wrong forum

  It comes to the installation of vista operating system instance

  read these:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• How to install Vista SP1 after fail methods of "General Resolution" and "Advanced Troubleshooting" Microsoft online?

  I have Vista Home Premium 32-bit. I want to install SP1 (and, eventually, SP2 before the April deadline, deadline of 2010). I tried the "Windows Update" - it did not work. I downloaded the installation manual - it did not work. This is probably the right forum to deal with SP1 installation problems vis a vis Vista. Could someone please offer some advice on what would be my next step in the installation of Vista SP1 32-bit? To be more precise on the substantive contribution: I met this http://go.microsoft.com/fwlink/?LinkId=101139link, which redirects to this link http://support.microsoft.com/kb/947366and this link 947366 is where I went through resolution 1 to 4 of the resolution in a vain attempt to get SP1 installed on my computer. At the bottom of the resolution 4 that following is indicated:

  Note If the problem is not resolved, this content cannot help you. So, you might want to visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/contactus
   
  which of course makes back off the screen of troubleshooting altogether. I tried to call Microsoft and their lines are busy all the time. I hope that someone else has experienced this similar problem. I did much research on Google, nothing helps. I hope that someone in "Microsoft answers" can provide an answer on my question to Microsoft.
  Again, my question is: what should I do to get SP1 is installed if failure of resolution of 1 to 4 of the resolution at this link http://support.microsoft.com/kb/947366 ?
   
  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• Windows Vista SP1 will fail with a message indicating that I have the wrong language pack.

  Vista SP1 fail with Vista Ultimate...

  Hay there. Recently moved to Sweden, the United Kingdom. Installed Vista Ultimate (64 bit). It's a Swedish and Swedish-language facility. There no SP1, but when I download the stand-alone SP1, the installation didn't say that I have the wrong language pack... suggestions?

  Hello

   

  Method 1: Download Service Pack 1 from the given link and see if that helps.

  Windows Vista Service Pack 1 all language standalone (KB936330):

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

   

  Method 2: See the following article:

  Error message when you try to install Windows Vista Service Pack 1: "Windows Vista Service Pack 1 cannot be installed on your computer.

  http://support.Microsoft.com/kb/947876

• Vista SP1 installation failed and now my system is unable to start.

  I tried to install the Vista Service Pack 1 (SP1) and it stalled for hours with this line of text on the screen nflickering:

  !! 0xc01a001d! 28461/88529 (\Registry\Machine\COMPONENTS\DerivedData...)

  I have a Toshiba satellite laptop computer with Vista Home Premium 32-bit. I have tried everything you can imagine on these forums - including:

  -Rename the configuration files of the prompt c.
  -creation of a true recovery/repair disk (Toshiba only sent a system recovery disc, not a repair disk) and attempt to run the repair from here (nothing was fixed and instead restart, he went to a black screen)
  -attempt to restore an earlier point but, as many others have remarked, the installation of SP1 apparently removes all set points, so it's been a bust
  -a tried to run chkdsk f / but who gave me an error indicating that the volume has been used and did not work.

  NOTHING works! I can't boot my system, and frankly I'm furious that Microsoft has failed to solve this problem for 3 YEARS according to assignments in these and other forums. I've always been a devout person PC - a bit too elitist for me to Apple. But I am absolutely disgusted that I potentially have to do a complete reinstall, including downloading all my software again for all my other programs.

  I am the Coordinator of health care for the County, I live in, have 3 kids to take care of and frankly, did not have the time to deal with this kind of setback. I worked on ALL this DAY, ruining the Superbowl Sunday, something that the people at Microsoft obviously don't care no difficulty. That tells you how much they care about customer support, I guess.

  If anyone has found a viable solution to this problem that CREATED Microsoft with an update that was supposed to IMPROVE their Vista defective product, please, please, help! I wish I had never entered in this horrible computer vacuum! Only, I tried to download this update because I received an email from Microsoft that offers a download of Windows 2010 beta to try, and everyone spoke of so many Windows 2007 (unlike Vista) I thought I would give it a try - only to find out that I had to have SP1 to install 2010. I feel I'm in a Kafka story.

  Thank you.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Get an "unknown error" so he was trying to make the Vista SP1 and the error code 800F081F

  I am running Vista Ultimate.

  I installed the hotfix for Windows (KB947821). I always get the "Windows has encountered an unknown error" with the code 800F081F.

  I am also having .net Framework questions (why focusing on my updates in the first place, I started). I have "fixed" but was lifting a msg of error at startup:

  > Unhandled exception has occurred in your application. If you click on > continue, the application will ignore this error and attempt to continue. If > you click on exit, the application closes immediately.

  > There is a parsing of the query error. [The line number of tokens = 2, token line > offset = 27, token s = error]. (I have more error msg if necessary.)

  After you install the hotfix, this error disappeared, but I can't yet download the update of the SP1 for Vista. It is a sine qua non for SP2.

  Help, please! Anyone? 8

  * Title *.
  I get an "unknown error" so he was trying to do the update to Vista SP1, even after the installation of "fix" and always error code 800F081F

  KonfusedKathy,
  I suggest that you do the following:
  Start by putting your system in a clean boot State.
  Run the disk error checking
  Run System File Checker
  Run the System Update tool
  If there are not only found problems that couldn't be fixed by one of them and then try to reinstall SP1.

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista SP1 install problem

  Have ultimate Visa on computer and SP1 appears in update as long as 1.9 Mb file {KB936330}. Installation seems to go ok excepy who, after having agreed to be wary of many reboots, is seems to load in a few seconds [appears as update added] with no restarts BUT a few minutes later, the same update appears.

  Tried to get around this by downloading the SP and running of the saved file. Once again, everything seems ok [several reboots this time] until step 3 of 3 is 100% full and the message appears while the SP has not then install the steps are to be set aside. In the end, the 0x800F0826 code appears as explantion. I have treid research on this problem, but to no avail yet.

  Can someone help me?

  Hello.

  Here is some information on this error code:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code-0x800f0826-when-installing-Windows/2f034887-C30A-4E2D-9BB7-d07246d6b4ae

  "Windows Update error 800f0826"

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-800f0826#1TC=Windows-Vista

  _________________________________________

  It's the way you normally install SPs without using Windiws update:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Vista SP1 installed 4 times 'successful' but does not show, how do I fix

  tried to fixit... He says it's fixed, but it is not

  Hello

  Just to have the same problem on a new installation of Vista, were installing updates for days and SP1 is doing wrong. No SP2 without SP1.

  I was able to install SP1 a few days ago on the same machine. (before I nuked it to get rid of my leftovers of old friends).

  In my desperation, I downloaded the standalone version of the Vista SP1 available from Ms. It worked!

  BR
  Surfstian

• Widows vista SP1 installed watch, but still giving it to me as an unpdate, what should I do?

  I installed windows vista service pack 1 as an update, and when I check the history update watch installed and successful, but when I go to update the system still gives it to me as if it was not installed. I installed again and it shows successful, but then give it to me as a new unpgrade. For me, it seems that is not installed. What can I do? I need to renew to get Service Pack 2 to be able to install Internet explorer 9. Thank you!

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you if SP1 is installed or not.

  If this isn't the case, then choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• The update install fails error 81

  Update install fails with error 81; "another installer running" I have no other installer running on this computer. All the solutions to this? Thank you!

  Hello

  This error appears when there is a background running program in the machine, the best option is to shut down the machines all running processes are closed. Restart the machine, it should work.

  You can also kill all processes associated with CC in the monitor activity manager task & then start.

  #main_You_are_already_running_another_installer http://helpx.adobe.com/Creative-Suite/KB/Troubleshoot-error-messages-Bootstrapper-CS5.html_

  Kind regards

  Sheena

• error code of Microsoft office update 646___i go ahead and they updates are downloaded, but when it will install fails error code 646 said, I tried at least 10 timesto install them, but every time fails.

  I tried to install the update for Microsoft office word 2007 (kb974561), filter junk e-mail in microsoft office outlook 2007 (kb976884), the michrosft Office info path 2007 (kb976416), Essensials update for microsoft office system 2007 (kb973704), and update of security for microsoft office excel 2007 (kb973593)

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to move from Win Vista SP1 to SP2 (error: TRUST_E_CERT_SIGNATURE (0 x 80096004))

  Hi all

  I am using Windows Vista Home Basic 32-bit SP1, and now I want to upgrade to SP2.
  I tried by means of windows update and the download of the update from microsoft download website. the error code in windows update is 80096004.
  http://img140.imageshack.us/img140/4650/failedupdatetosp2.jpg

  and I tried to install the standalone update and the error code is "Error:TRUST_E_CERT_SIGNATURE(0x80096004)".
  http://img133.imageshack.us/img133/5097/failedupdatetosp23.jpg

  Please help me...

  THX & regards,.
  Eko Rahman Wisuda

  Hi Rahman Wisuda Eko

  You may follow the link below, where there are certain steps that must be followed before installing service pack.

  http://support.Microsoft.com/kb/947366

  I hope this works

  Thanks and greetings
  Anthony - Microsoft Support