Ive tried to install Vists SP1 and get error 800F081F
Ive been trying to do that, because it came out... and no one has been able to help solve it. If someone had this error? As you can see I asked this question 2 years and still nobody has been able to give me a solution.
Hello
you are posting in the wrong forum
It comes to the installation of vista operating system instance
read these:
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
Tags: Windows
Similar Questions
-
I run MGADiag.exe but I still have the same problem. Thank you very much!
Keith
I run MGADiag.exe but I still have the same problem. Thank you very much!
Keith
Windows Update Error 80070002
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698Perhaps, you must manually download SP1 & SP2 and install even in a clean boot state:
http://support.Microsoft.com/kb/929135
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7This would eliminate any interference from other programs, etc.
Instructions for manual installation are included in the links below: -.
Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx -
I am trying to install Windows Update and get 800F080D for IE9. Why?
I am trying to install Windows Update and get 800F080D for IE9. Why?
Hi KevinMiller
1. don't you get the error only during the installation of internet explorer 9?
2. when exactly you get the error message?
3. that you get an error when installing other windows updates?I suggest you to check if you have all the prerequisites installed for internet explorer 9.
http://support.Microsoft.com/kb/2399238
Refer also to the links below and check if you did all requirements before installing internet explorer 9.
http://support.Microsoft.com/kb/2409098http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
I hope this helps.
-
When trying to install Google Earth I get error 1603. How to fix?
When trying to install Google Earth I get error 1603. How to fix?
Theres a few things to try in this post - https://productforums.google.com/forum/#! topic/cards/TGgdOcs4PL0 specifically the bit - "the file offered on the main download page is a small installation of the file that at the launch, connects to the internet and download and install the full program. "If you have problems with this, I would normally advise you try the complete installation file this page,... etc."
that someone later claimed contributed to them and also something to check.
If this does not help, I hope someone else will be "the chip" soon.
-
I tried to install vista service pack 1 error code 8007036be
I tried to install vista service pack 1. After so many times, I made a fix it. Now, I'm getting an error message 8007006BE. Can anyone help?
0X800706BE RPC_S_CALL_FAILED =
The remote procedure call failed.Which means in a way, that communicate with the update server cannot be established.
This could be caused by a third-party product running on your computer like anti virus etc.
You can try a clean boot of your computer and installing the update or in the alternative, download the full update and install it.
http://support.Microsoft.com/kb/929135
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Windows Vista Service Pack 1 (SP1) - 434.5 MB
http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
Windows6. 0-KB936330-X 86 - wave0.exeWindows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
Windows6. 0-KB936330-X 64 - wave0.exeWindows Vista Service Pack 1 - language standalone DVD ISO
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MBThings to know before you download Windows Vista SP1
http://TechNet.Microsoft.com/en-us/library/cc507882.aspx -
Get an "unknown error" so he was trying to make the Vista SP1 and the error code 800F081F
I am running Vista Ultimate.
I installed the hotfix for Windows (KB947821). I always get the "Windows has encountered an unknown error" with the code 800F081F.
I am also having .net Framework questions (why focusing on my updates in the first place, I started). I have "fixed" but was lifting a msg of error at startup:
> Unhandled exception has occurred in your application. If you click on > continue, the application will ignore this error and attempt to continue. If > you click on exit, the application closes immediately.
> There is a parsing of the query error. [The line number of tokens = 2, token line > offset = 27, token s = error]. (I have more error msg if necessary.)
After you install the hotfix, this error disappeared, but I can't yet download the update of the SP1 for Vista. It is a sine qua non for SP2.
Help, please! Anyone? 8
* Title *.
I get an "unknown error" so he was trying to do the update to Vista SP1, even after the installation of "fix" and always error code 800F081FKonfusedKathy,
I suggest that you do the following:
Start by putting your system in a clean boot State.
Run the disk error checking
Run System File Checker
Run the System Update tool
If there are not only found problems that couldn't be fixed by one of them and then try to reinstall SP1.Post back with the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Try to install 11 updates and get error Codes: 641 80070641
While trying to install the important updates 11, I get code error "641" or "80070641" but I can't find this code in Windows Help & Support! Can someone please help me with these error codes so that I can finally install these updates. I am running Windows Vista Home
-
Try to install update KB929777 and get error 8007007B
can someone tell me how to solve this problem. Try to install the update kb929777 and get code error 8007007b
Hello
Step 1: Update tool for Windows Vista system can correct some conditions that can cause this error. To use the tool, follow these steps:
a. go to the Web page of Knowledge Base article . In the information for advanced users section, find the Windows edition and the system type of your computer, and then click the link to download the system update readiness tool. To find your edition of Windows, see view your computer information.
b. run Windows Update again.
Step 2: Install the stand-alone package of the update to the clean boot.
Download the update to open the link below and install the update to boot.
i. for Vista 32 bit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=240ac3f3-2b60-4b70-b709-06b2bc5b1336
II. for Vista 64-bit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=91672c7c-614b-404c-850c-377541e93c18
Note: Please make sure that the computer is configured to start as usual by following step 7 of article.
-
TRIED TO INSTALL VISTA SP1 NOW I'M DEAD IN THE WATER
I am running Vista Home Premium 32-bit on a Dell desktop computer. A month ago, I came across a few major problems with my computer. I couldn't get out of safe mode, programs are not run properly, blah, blah. With a lot of help, I finally could get all back to what I thought was normal. I ran antispyware, antimalware & and with other tweeks & fixed I have not noticed problems for about a week.
So last night while on the computer, I got the message that Windows is ready to install an important update. It was SP1. I usually wait until the middle of the night & let Windows automatically install the updates but I thought why wait, then I started the installation. He said that it could take several hours, I went to bed and I forgot about it.
This morning I wake up to see that the monitor is all black except for a single line of printing:
!! 0xc01a001d! 37354/98242 (\Registry\Machine\components\derivedata...)This printing line flickered sort of as he wants, but he was stuck. I failed to continue or stop so I finally did what was once called an illegal arrest... I don't know if there is a new term for this, but I think you know what I mean. When I turned my computer back on, I got the message that something caused my computer do not close properly, perhaps a new program or software, and he suggested that I have let Windows find & try to fix the problems. I clicked on that and the blue bar began to run through the progress window. He says that it can take several minutes. Well 2 hours later nothing had changed. He was always doing exactly the same thing. He wouldn't let me cancel so I let it run half an hour. Then I finally made another "illegal stop." When I turned the computer back on I chose normal startup to the top even if the computer suggested I have start the repair program.
Now I know whence the line of print that I mentioned before. The screen was black except that it begins to show all the things that are installed on the computer. At least, I guess that's what it is. It was like when your computer is running antispyware or something & all files are being checked. In any case, it's exactly the same thing that what I pointed out, it was on my computer first thing this morning except that it stopped at 28599/98242. He has not moved or changed except it flashes as he wants to spend but cannot.
What is the cause & do - what do I do about it? Trying to do a system repair did not work & I can't get the computer starts normally then now what? SP1 is installed on our laptop with no problems. The only difference is that I let it install automatically.
Please help before I have eventually throw the top of desk by the window!
Sandee
Sandee,
David advice was correct.
Read all the info on the link below.
You need to download the ISO file, I talked to the computer on which you post here, not the broken one!
It is a repair disc you need to do from this ISO file:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.And the 32-bit is what normally comes on a computer, unless 64-bit.
Mick Murphy - Microsoft partner
-
Hello
I try to install my apps via Adobe Creative Cloud Desktop and all I get is "download error: Please try again or contact support". I don't have any number of support, or something like that. If I try to reload, it does nothing.
Is there anyway I can fix it? I even tried to reinstall the software always with no luck.
Hope you can help.
Damian
Hi Damien,.
You can follow the article: CC help | Download error in the applications tab of Creative Cloud Desktop Application that will help you get your number sets.
Let us know if it still gives you problems.
Thank you
Yann Arora
-
I am trying to down load 13 Photoshop and get error 413. Help, please
I'm trying low loan 13 Photoshop and get error 413. Help, please
Hello
Please see the forum topic below.
Please use the link below to download Adobe Photoshop elements 13.
Download Photoshop Elements products | 10, 11, 12, 13
I hope this helps.
Kind regards
Vivet
-
I've had this problem for awhile now and it seems to be no details on how to stop the resulting error code.
The update of the serivce pack seems almost half installed the first time that I have tried (and the first time she didn't). Whenever I try once again today, the process bar is automatically up to halfway and then it goes all the way to the breast are contiguous 5 minutes and gives this error code.
This update seems important. I can download all other updates without problem and downloaded system preparation tool already and tried to install the update by downloading it manually - the same problem occure.
Can anyone help please?
I tried the above and the error persists. Is there another way?
The only other 2 methods would be:
(1) try to run the System File Checker and see if it can replace or repair which is not present. Read the section ofthe System File Checker utility
(2) do a upgrade on the spot , aka Repair the Installation, if you have the Vista installation DVD: How to perform a repair for Vista Installation
In addition, Microsoft has extended its offers free support for those who are just trying to install Vista SP1 :
Free unlimited installation and compatibility support is available for Windows Vista, but only for the Service Pack 1 (SP1). This support for SP1 is valid until August 30, 2010. Availability of support chat or messaging differs depending on your location. For customers resident in America North or Canada, chat and e-mail support is available.
Some questions may require more Advanced support for which there is a charge.
Please click on the first link to receive free assistance of MS before August 30 .
MowGreen Services update - consumer safety
-
I just purchased Adobe Acrobat Pro Student and Teacher Edition CD and tried to install it but I get a message that my sweet! wear is not up to date, I have OSX 10.7.5 and need 10.9 or higher. I tried to update the software, but I get a message that it is up-to-date.
Have you tried to upgrade the operating system? If so, then is there an error message you get when installing? Please share.
You can check: https://helpx.adobe.com/acrobat/system-requirements.html
Error message: it is so far: Adobe Creative Cloud desktop application uninstalled Adobe apps as up-to-date lists
Concerning
Stéphane
-
Impossible to install Windows Vista SP1 and SP2
original title: update to vista SP1 and SP2 problem
I have SP1 and SP2 update for vista problems. I completed the destructive recovery and try to install the updates for my new system, but I get the error message and cannot complete the installation.
Have you tried the manual download for SP1? Usually, if an update fails then by downloading and installing manually usually does the trick.
I was able to find a set of steps for you to follow on the problem of Windows Update. I hope it helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
-
I installed vista SP2 and when I started my computer back up everything on my computer is missing... How to get back all my pictures and music files? I tried to do a system restore, and I can't go back any further, then the service pack install... so everything is still missing... Please help!
Hello
Were there any changes or updates made on the computer?
I suggest you to see link and check if it helps.
Recover lost or deleted files
http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files
See the articles and looking for the missing files.
Find a file or folder
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-or-folder
Tips for finding files
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files
Maybe you are looking for
-
HP Probook s 4540: fingerprint reader does not
Hello Problem: fingerprint - Windows journal reader under does not have the ability to connect via the fingerprint reader. Overview: after installing the drivers of the fingerprint on the HP site and thanks to the HP protection tools to register succ
-
Windows XP wants to activate again after already being activitated
I meets me blue screens in Windows XP Professional, so decided to 'repair installation' (so I could keep all my files). I stumbled across the repair facility /, then made secure boot. I was invited to activitate Windows XP Professional, I did succe
-
I created my keyboard with "Microsoft keyboard layout creator v.14" and I create the package. It works fine but does not display the name of my keyboard on the language bar on the taskbar
-
Clear background with scrolling color
Hello, I am writing an application with BB JDE 4.1 and I have a little problem with the device as the 7920. I put a BackgroundColor and all looks good but when I scroll, the background is white. If I scroll up to the position I, the background is whi
-
Uniden wireless security surveillance system
I can connect the Uniden wireless security surveillance system to Windows 7 with a USB cable and it works. Why can't I do without this thread instead of using a USB cable? At the same time, the Dorgen had a free wireless software utility to use; This