Vista SP2 will not download. Problem with Microsoft?
Hello
I am trying to download the Windows Vista service pack 2 and the download seems to download under the ussual mannor, but I get the message "data are not valid. In addition, it seems that download says it's over when it has only downloaded about 50 KB.
I tried this several times then and on several internet connections with the same error. Also, windows update will not download the service pack on the target machine.
I am using the following link to download from the Microsoft site: http://download.microsoft.com/download/E/7/7/E77CBA41-0B6B-4398-BBBF-EE121EEC0535/Windows6.0-KB948465-X86.exe
If I do something wrong, please correct me, but from here, it looks like there may be a problem on the end of Microsoft.
Thank you
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.
Microsoft free support for Vista SP2 at the link above.
http://support.Microsoft.com/kb/935791
"How to obtain the latest Windows Vista service pack"
Read the download above information.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Kb2481109 will not download - fails with the error code 0X8007FOF4,.
I am running W XP, this is a kind of XP update, and it will not download. In addition, Google Chrome is not recognizing that I'm running on XP.
You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/958051and/or
The problem is usually caused by an infection of malicious software on your computer. To prevent the computer to become unstable, Windows will not install the update.
For Google Chrome: http://productforums.google.com/forum/#! forum/chrome
-
KB2585542 for vista SP2 is not listed in the microsoft updates
Hello
I have a Windows Vista Enterprise SP2 32 bit OS. where is installed without Microsoft Updates.When I ran/scan of Microsoft Updates, MS12-006 (2643584) from Jan 2012 recent PT in which KB2585542 for vista SP2 is not listed in microsoft updates.Y at - it an update to install before you get to the KB2585542 in the Microsoft updates.You will find appropriate support for Vista Enterprise in IT Pro forums-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro
-
X 64 Vista Sp2 will not install with error
E in case of failure 0 x 80004005
Microsoft article on this says it's on the 3rd party software partition. Is not on this computer because it is only purchased about 10 days ago. Please help because the 12 I return the computer at office depot as defective if the problem cannot be resolved.
It was a Microsoft update that bludgened it. I found an article where an update prevented the installation of sp2. Uninstalled the day then sp2 update.
This is another problem with Vista. Sorry about its sick I had tried to install it for days. I had been skeptical about to a HP system because I'm used to buidling to my own specifications.
-
Vista SP2 will not install. SP1 cannot be uninstalled
I'm using 32 bit Vista Home Premium SP1 installed. However, when I try to install SP2, I said that I must have SP1 installed, what I do already. I tried to uninstall SP1 and reinstall, but I was not able to uninstall SP1. If I try to reinstall SP1, I told myself that it is already installed.
If this request has already been addressed, I apologize for the duplication. Any help would be appreciated. TIA
André says.
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Vista SP2 will not install, see description
Okay, so since Windows Vista SP2 came out, I had this same problem, I click the install button, once its downloaded, it is said to restart the computer, so I restart and then a black screen at startup, turns on I get this when loading:
! ! 0xc0190036! 993/61999 (scansetting.dll)
I don't know what it means, for a better understanding
http://Desmond.yfrog.com/Himg739/scaled.php?TN=0&Server=739&filename=wi6q.jpg&XSIZE=640&YSize=640
My laptop is a Dell Inspiron 1525, I bought in September 2008
After this happens, I manually shut down the computer and then safe mode appears and it is said, to restore the computer to a point where I had this problem, and that's what I do, to use once again, I need to restore to the point before downloading
Update: now when I restart the computer, it gives me 2 options, 1, continue with a regular mouthpiece, which means, it goes back to the black screen and I get this... thing 0cx error code back to the top, 2nd option is to restore the computer, so I click this, then he spent at the logon screen, with others to come , and you need a user name and password, this has never happened before, and my username and password don't work, which means, there is no way to access my laptop at this point! Help, please!
Update: I'm now also get 0xc0000034 error code when I press F8 at startup, and I click on the debug option, here is a picture
http://Desmond.yfrog.com/Himg620/scaled.php?TN=0&Server=620&filename=98oyur.jpg&XSIZE=640&YSize=640
ANY HELP WOULD BE MUCH APPRECIATED!
Thank you
Obtained on the Microsoft Chat, I bought a disc and I was able to install SP2 and get rid of the error codes I received.
Thanks for all the help
-
Windows vista SP2 will not install
help please I try to download this service pack 2 for the last 5 months, and he won't. it restarts the computer, but that say it has not installed whats up with that
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
Windows Vista Setup will not download files
Whenever I try to download a file from internet, it stops at 99%. He did it only for a couple of months, so he must have had a problem with an automatic update or something. All I have this problem and know how to fix?
Hello
To make another account with your same password - ADMIN upgrade - REBOOT (do not only closing session) and
connect that account - you can download to use it? (do both ADMIN - one accounts in case that you
migrate to it and another to test and difficulty).It while in the new use of the account to LOWER your account regularly APPLY / OK to need - and then lift back
for the ADMIN - repeat several times - descent - go downstairs - raise - repeat. This allows to clear corruption.
Make sure that the account administrator.Try your downloads in the new account - the downloads work in the new account?
If necessary later this is the process to fix a damaged account or migrate to a new.
Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx---------------------------------------------------------------------------------------
Then connect to the old account and try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------------------------------------------------------
Then reset IE
What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had
on this machine, including those that you have uninstalled (they leave remnants behind which emits causes).Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - Tools - Internet Options - Advanced - tab click on restore advanced settings, and then click RESET - APPLY / OK
IE - Tools - Internet Options - Security tab - click on Reset all areas - APPLY / OK
Close and restart IE or IE with no addons
Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only. If you ever think malware update and then run it as
a scanner.
http://www.Malwarebytes.org/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Vista SP2 does not communicate well with my Epson Stylus R200
Are some error messages such as low on ink, which was broadcast on XP is not on Vista SP2, is there a patch for this?
"Nicbut" wrote in message News: * e-mail address is removed from the privacy * .com...Are some error messages such as low on ink, which was broadcast on XP is not on Vista SP2, is there a patch for this?
It is strictly a printer driver problem. Epson doesn't have no drivers for Vista or later on their website, you're stuck with the default from Vista drivers if you want to continue to use the printer with Vista or later version of Windows 7. -
Callback thread will not end, problem with CNVDisposeData?
I have a problem with a thread of reminder on a RT system. I work with CVI 8.5 on the pc and the engine Runtime 9.0 on the RT system.
I use a client-server architecture, the client writes data to a network 1 d variable, the server is informed via a connection to the Subscriber and frees a callback function. My problem is, this callback function is launched in another thread (not the main thread) and is not over. I reduced the problem as much as I could, right now the only thing I do in my callback is to have the CNVdata. The problem occurs when the callback is released, create and destroy the connection to the Subscriber without calling the callback does not lead to any problems.
The real problem with this, is that when my program ends, there are still threads running on the RT system, which can lead to problems later (I have a multi-day-measure application that crashes always at the same time, so I must really have it clean) to the left.
I'll try to post a snippet of code to make sure you get what I'm doing (all in the main RT, for simplicity):
CNVCreateSubscriber (serveurnom, dataCallback, NULL, NULL, 3000, 0, & dataSubscriber);
While (!.) () RTIsShuttingDown &! error)
{
ProcessSystemEvents();
Sleep (100);
}CNVDispose (dataSubscriber);
ProcessSystemEvents();
CloseCVIRTE();
My point basically looks like this:
Sub CVICALLBACK dataCallback (void * handle, CNVData data, void * callbackData)
{
CNVDisposeData (data);
}When I look at my son when running, I see from the callback thread, when I'm inside, but it's still there afterwards. In addition, what is CNVDisposeData supposed to do? The variable 'data' retains its value even after disposing. I don't see any change at all.
I would appreciate any comments or ideas, I have tried to solve this problem for a few days and really don't know what else I could try!
Yes, for the network variables, callbacks are called on a dedicated worker thread. Do not calls to ProcessSystemEvents - network variable reminders will be always called. You must call CNVFinish at the end of RTmain to ensure that the worker thread comes out cleanly. If your variable is hosted (configured) on RT target, then the worker thread can continue to operate even after the call to CNVFinish - I recommend that you host the variable on another machine, said the Windows host.
-
Hello
I have Vista Ultimate SP1, install SP2 fails with the following error:
Error: E_Fail (0x80004005)I uninstalled my AV and firewall and tried again and not joy?
No charger GRUB etc.Any idea?
Bossie,
Try the Microsoft Fixit described in the following article:
http://support.Microsoft.com/kb/971058/en-usCheers, Mohan | If your questions are answered, please come back and score the reply as an answer while others may use it.
-
Error code 66 was downloading an update Sercurity for .net Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008R @ for X 64 - Based Systems. Update; Windows 7-64 Vista Home upgrade. Whenever I have stop this update tries to lower the load (for the last month) with Code 66 a failurs
See Andre.Ziegler response to a previous post about the error Code:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/107c5a3a-3126-4EAA-930E-815aed8a2582 >
-
Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and said to upgrade?
Make sure you sort the display you are looking at instead of file name recording time. It is in the context menu with a small sign of a to z just below images. Make sure also that you have no active filters.
-
Suggestions download PhotoShop Creative Cloud?
Hi Cathy,.
You can click on "Learn more" to check the exact error code.
Also, please see the article in case of exit 6 or 7 code: https://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Please see the thread: CC Photoshop update failed. Download error 49 or Photoshop CC 2015 keeps do not install: problem with Patch
Hope this helps!
Kind regards
Shelly
-
Microsoft 'Fix it' will not download/run/save
Hello
Microsoft 'Fix it' will not download, Vista SP1 32, running with the Defender, basics of security, AVG 9. and Win firewall. I added the site as exceptions on IE etc, but I can't get the .exe to others... BECAUSE IT WON'T SAVE TO THE OFFICE OR TO RUN!
Help please
Hello
You shouldn't run MSE with a complete other antivirus. And Defender is disabled by MSE as it does
the same function for spyware and antivirus adds.What Fix - it you try to run? What is the problem?
AVG is probably the primary cause. I would uninstall it by using the removal tool or Special Instructions
from their site - AVG 9 is causing many questions. Usually best to disable as much as possible before
the abduction. Also download but do not install the replacements until after the deletion is completed
and a reboot. Use the method below to all in the right order.Download - SAVE - go to where you put it-click on - RUN AS ADMIN
AVG removal tool
http://www.Avg.com/us-en/download-tools-------------------------------------------------
Here's what I use and recommend:
Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
Microsoft Security Essentials and Prevx have also proven very reliable and compatible.Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.
Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
(Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
http://www.avast.com/eng/avast_4_home.htmlOr use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.================================
Your router may need a firmware update, but that would probably not produce
bluescreens. And the rest can be processed after that AVG is out of the picture.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
need for greater impression in the taskbar
I saw poor and need to get the words in the most important task bar. How do I do that?
-
What is with the box save as in Acrobat Reader?
First of all, I hate that Apple got rid of save slot in one of their programs. I need to find a way to do it and I HATE what they did. Bring back the Save as Apple. Now I get this box save as stupid in Acrobat Reader and I can't stand that either. Ap
-
event handler programmatically for different loop than the event itself
Hello I'm driving a car of mine using compactDAQ in labview. I have two parallel looping using queues. One is for the tips - READ LOOP playback engine - (running more often), and the other for writing to the engine in bits - LOOP to WRITE. When I sho
-
HP officejet 6310 don't sweep no mac os x 10.9
Hello I have a problem with scanning on my mac OSX 10.9 6310. Through Apple > system Pref > Printers Scanners & then click on scan, I get the preview of the scan, but when I press Scan I get a message that pops up saying momentarily made scanning Sel
-
Breng zo op een update ITU totaaltijd weer body soon please in of lijst verschijnt.