Vista starts and then needs to restart to work properly.
When I boot Windows Vista logo appears, but the theme song is not played (the speakers are turned on) if I connect before that happens, the sidebar (with the clock and the slide show) will not come to the top and I try to use all programs may not work properly. The only way that it works is if I go on waiting for the computer to stop treatment, restart, wait a few minutes for the theme tune to play and then it is safe to open a session.
As far as I know is a few weeks ago, I suffered a simultaneous attack of ten Trojans (they have since been removed AVG) and my personal account has been tampered with the same problems mentioned above, I've used for the administrator account.
Either your computer is still not clean (AVG alone is usually insufficient) or the operating system has been damaged. Start with a more in-depth analysis and post back with the results, if you want more information:
http://www.elephantboycomputers.com/page2.html#Removing_Malware
MS - MVP - Elephant Boy computers - don't panic!
Tags: Windows
Similar Questions
-
Satellite P200 freezes after 5-10 min and need multiple restart to work properly
Sorry in advance for my low level in English because I'm french...
My p200-1 has a strange problem:
Every day when I start a new session, it works fine (the start until office) and I started working.
After 5-10 min, windows vista (ultimate) freeze and I need to stop/restart time course and finally the success until the office.
Sometimes I need to boot into safe mode without network and wait for 5 min officeIt seems that somewhere or a piece of the laptop must be hot to function properly (something weird maybe)
I cleaned the air dry windows fans without improvement. I bought new memories of toshiba in france and the problem is still there. Hard drives are ok (scanned and tested)
The warranty ends in January so...
Does anyone have an idea?
Thank you
Hello!
Have you cleaned the laptop with a jet of compressed air? This could blow the dust from the cooling fans and therefore you should not disassemble the laptop.
I m not sure but it could also be a software problem. You have reinstalled the laptop with the Toshiba Recovery disk?
This disc contains the settings from the factory with all the drivers and tools. And you can determine if it s a hardware or software problem.Good bye
-
Upgrade to vista SP2 and now a driver does not work properly, and my web cam does not work
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
Hey zanalder
If your webcam is integrated into a laptop hp you get all the drivers for hp
http://welcome.HP.com/country/us/en/support.html
If you have a desktop computer with a separate webcam go on webcam manufacturers website and look for the webcam software
Walter, the time zone traveller
-
Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.
The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.
The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!
My specs are:
Avatar
CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
GPU: Geforce GT 64016.0 GB
operating system 64-bit, x 64 processor
Windows 8.1Hi Kaelie,
This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.
Just reply to us if you are having problems with Windows in the future. We will be happy to help you.
-
My laptop was working fine last night, but I left it on and unplugged and he died. This morning, I'm an endless loop of ' your pc encountered a problem and needs to restart. We collect only some error information, and then let's restart for you"
the message appears for a second and then the VAIO logo reappears before the pop blue screen for a second. This goes just forever with no additional info. I can see an additional line appear on the blue screen every time everything as it turns off so it is unreadable.Help please?more information: the percentage never bar going past 0% it pop right to the top and back immediately to the VAIO screen.Hi Wesley,
This problem could be due to corruption of the system files, I suggest you try to perform auto repair using Windows 8 disc of Windows recovery environment (WinRE) and check if it helps.
To run auto repair on follow computer Windows 8 as follows:
a. Insert the media (USB or DVD) and restart your computer.
b. press on the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.
c. once the Windows Setup window appears, follow these steps:
d. click Next and select repair your computer.
e. you will see an option to choose and then a blue screen. Choose the troubleshooting option and select advanced options.
f. you can choose automatic repair of the advanced boot option.
Keep us updated on the status of the issue.
-
All of a sudden my Epson Workforce 345 all-in-one printer will not print. I get a message that the local print spooler service is not available and I need to restart the spooler. What does that mean?
Hello
Check with the manufacturer of the printer for updated drivers, support and Forums for
known issues.Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.If there is that no Windows 7 drivers try the Vista drivers if those that exist.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support===============================
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
Follow these steps in the kind of prerequisites:
Clean the General corruption and repair or replace the damaged/missing files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html------------------------------------------------------
References to Vista also apply to Windows 7.
Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
to install - make a right-click on the pilot - run as administrator.Also check with your support and the Forums printer manufacturer.
--------------------------------------
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - devices and printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Windows 7
http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989Windows 7 Service Pack 1
http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
and here
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
The Apple Mobile Device Service service on Local computer started and then stopped.
My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)If your iOS device does not appear in iTunes, try the following:
- Open Control Panel > Device Manager
- Plug in your device
- Locate Bus USB Controllers > Apple Mobile Device USB Driver.
It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB. - Right-click and select software update of the driver...
- Click Browse my computer for driver software
- Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers - Click on let me pick from a list of drivers for devices on my computer
- Click on Apple Mobile Device USB Driver
- Click Next, then close and exit the Device Manager
To step 3 above, open the Device Manager. Expand one of the articles that are listed.
- USB Bus controllers
- Imaging devices
- Portable devices
- Other devices
Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.
Or try If iTunes does not your iPad, iPhone or iPod - Apple Support
If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.
Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.
TT2
-
Original title: windows search service does not start.
When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.I no longer need it, I just backed up all my files and re - install windows XP.
-
the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
Hello
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and read this information to microsoft:
Error message when you run Windows Defender: «Error 0x800106ba»
http://support.Microsoft.com/kb/931849
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial;
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this program;
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
I left by mistake a USB in the port when I restarted my computer (Windows 7).
Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.
If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.
How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?
Thank you.
Tried that, but it did not work. Finally got and IT guy come and it took him 3 1/2 hours to repair.
Need a bootable floppy which has then repairs itself.
Lesson learned. Have an available for each computer startup disk.
-
I own "Lenovo Ideapad Z570-1024 AFU" model computer laptop, which came with windows 7 Home Premium. I've updated with "Windows 8 Pro.
I had a problem in my laptop and lenovo people changed my laptop motherboard. From there I'm not able to boot in Windows 8 OS and it is continuously restart saying: "your pc encountered a problem and needs to restart. We collect only some error information, and then we'll restart for you. "You can search internet error: WHEA_UNCORRECTABLE_ERROR.
I tried all recovery options and reset options proposed in the Windows 8 Pro DVD. I tried to install the new copy of windows 8, but still, I get the same error.
Now the hard drive is empty with no BONE in there. But yet when I try to install 'Windows 8 Pro' is a short walk, and after that start the same error mentioned above.
Is - this hardware problem? or incompatibility problem?
Please help me to get this resolved.
Thank you for your valuable time and information.
In my case, a hardware problem blocks the installation of any form of windows (windows 7 or windows 8). Yet once, I gave my laptop to the manufacturer to correct the hardware problem (motherboard problem). This time they say «it could be a CPU problem» I'm waiting to listen to their share of the final solution.
Once again thank you for your suggestion. Implement these if the people of Lenovo does not solve my problem.
Kind regards
Srini -
I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?
I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?
It is an older version of windows. In 7 or Vista, click Start, and then use the search box - enter the article they say "run" and press ENTER.
-
It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".
I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '. Have windows 7.
I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.
I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!
Thank you
Hello
Please contact Microsoft Community.
I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:
What is the brand and model of your computer?
I suggest you follow the methods and check them off below if this solves the problem.
Method 1: Clean boot
A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.
Method 2: Prevention of insufficient memory problems
Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section
http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7
Method 3: Virus Scan
Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Additional information: Windows optimize for better performance
Hope this information helps. Response with status so that we can help you.
-
Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1
Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »
I am so desperate and would appreciate helpful suggestions.
Hello
1. When was the last time it worked?
2 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman.
Windows wireless and wired network connection problems
If the steps is not enough, go to method 2.
Method 2:
Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic
(a) (a) cliquer click on start-run, type services.msc, the, click OK.
(b) ensure that the following services are started on and set to automatic.
(c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).
(d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "
See also:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Hope this helps and keep us posted.
-
Service server vmware vcenter orchestrator on local computer started and then stopped
Hello
I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;
"Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.
Can someone give me the solution for this?
Thank you
Radhika
First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.
If everything is green, see the server.log file and look for FATAL / ERROR.
Maybe you are looking for
-
How can I change where messages and temporary files are stored?
How can I change where the profiles messages and temporary files are stored on the disk. because I'm using an SSD for the OS (Matt Mint17) and program files. I oorder to extend the life of the SSD I want to store these files on a different HARD drive
-
Why do I only half of my IE favorites when they are imported into Firefox?
I tried to import my favorites IE8 twice in Firefox. On these two occasions only on the first half of them appear in Firefox. There is as a limit of size on the Favorites, or some other problem here?
-
How to adjust shared video memory - R10/R600 teacher of Win7 32-bit size
Hello I use two laptops in the business - R600 and R10. Both with Intel 4500 graphics card and shared video memory. Both win Windows 7 Professional 32 bit. In both cases the system of reserve 1 159 MB of video memory. As I do not play no matter what
-
I had my (very short) life of Apple products. Currently, I have an iPhone and a pc, but I can't run iTunes on my pc without it crashing constantly. It turns out that the Apple software is not compatible. Is there a way to access/download the music an
-
Satellite A300 1 5 - freeze at startup
Hello.. I [Satellite A300 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589] which came with windows Vista SP1 32-bit initially