Vista Ultimate is slow to establish that free wifi at startup only connects at the local level

Similar Questions

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• Get 'no scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. "

  Original title: Windows Fax & Scan

  Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.

  The error that says:

  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.

  the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.

  What can I do?

  Daniel Capelle

  The scanner came with a CD to install the software?  Some more recent does not come with a CD, you must go to the Canon Website and you get the software.

• Windows Vista Ultimate EXTREMELY slow

  OK, so I installed Windows Vista Ultimate on my computer, I like it, but it is extremely slow.

  The shape of plug the computer are as follows:

  AMD Sempion 1.64 Ghz processor

  480 MB of RAM

  HDD 40 gig

  This should be enough to start. I wonder how can I speed up a bit I've run Diskcheck and defrag and Dick Clean-up with very little progress. Just don't have the money for the extra RAM right now either so if there is a way to speed it up without buying extra RAM, I would like to know.

  On Monday, May 24, 2010 20:53:04 + 0000, smokeybear2011 wrote:
   
   
  > Ok, so I installed Windows Vista Ultimate on my computer, I like it, but it is extremely slow.
  >
  > The card form the computer are as follows:
  >
  > AMD Sempion 1.64 Ghz processor
  >
  > 480 MB of RAM
  >
  > 40 gig hard drive
  >
  > Which should be enough to start. I wonder how can I speed up a bit I've run Diskcheck and defrag and Dick Clean-up with very little progress. Just don't have the money for the extra RAM right now either so if there is a way to speed it up without buying extra RAM, I would like to know.
   
   
   
  It's no surprise that it is extremely slow. You have * way * too little
  RAM and you will never get a decent performance with this amount. 1 GB
  is the minimum necessary for performance * beginning * become
  acceptable for people whose needs are very light (because their)
  using the application is light). But for almost everyone, is at least 2 GB
  really need or that you are satisfied with the performance.
   
  In addition, a 40 GB hard drive is * small *. This isn't a performance problem,
  but unless you do not do much with your computer, you will be running
  more disk space very soon. You should have at least 160 GB or more.
   
   
  --
  Ken Blake
  Please reply to the newsgroup
   

  Ken Blake

• has ran windows (vista ultimate) update and then find that my ipod is not recognized by windows or itunes

  ran windows (vista ultimate) update and concluded that my ipod not recognized by itunes or windows, can anyone help?

  Hi BRIANMOODYRU

   

  You can view the articles below and check out them if the steps to help you resolve the issue-

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1496

  If you need assistance, you can also consult resources and specific apple. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://discussions.info.Apple.com/index.jspa
  OR http://www.apple.com/support/

   

  I hope this helps.

• Impossible to establish a free WIFI connection

  original title: network problems.

  Have Windows Vista with Norton 360 AV. Can connect to home even free WIFI at McDonalds, but unable to connect to the network at my University.

  Hello

  Contact Department of your University with this problem.

  See you soon.

• 53 updates to Windows Vista and now screen keeps saying that it configures updates, then it restarts and the wont do anything else

  After using no not my laptop for some time, I turned on and 53 updates to Windows Vista. Went through the whole process, then got to the updates configuration screen and the laptop keeps restarting and it won't do anything else.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ___________________________________________________________________

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista. On signing in I am confronted with a screen that looks normal, but does not connect to the internet. Microsoft Outlook.

  Also, I get a 'box' a third of the size of the screen also with no connectivity.                                                                                                                   Icon in the lower-right corner blinks away as if it is connected, and it's the internet! However, operating in Mode safe mode with network everything works fine (except only have limited programs, which is normal in this mode (as I understand it, in any case).          My computer is a Dell Inspiron 1520 running on Vista Home Basic, loaded with Windows + Google.  Old, but my other computer was badly infected by a virus, is having it is a hard drive wiped and reloaded by someone who works for a company of 'com' of the big computer.)

  Hi, Richard,.

  Have you been able to connect to the internet on this computer so far?  Try a system restore

  Have you tried to use a different web browser to connect.  Is the same behavior?

  Check if your network card appears in Device Manager. If it is there, check yellow exclaimations next device Network adapter Manager. You can also go to the manufacturer's website and check if an update for your network card.

  If the network adapter exists and works, try resetting the TCP/IP stack:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• I have a Vista Enterprise desktop connected to the local network, but the notification icon still shows disconnected state

  I have my Vista connected to the network and the "network and sharing Center" shows that it is connected and network is accessible, but the network in the status bar icon displays an icon showing disconnected state. How to solve this problem? Restart does not help

  Guru

  Check and make sure you have these services defined in this way. This initiative will establish whether there is a connection.

  1 - on the road - network Manual connections
  2 network list Service - auto-
  3 network Location Awareness - road - automatic
  4. bad Service Network Interface - on the road - automatic

• My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

  I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

  I get local only on both connections Wi-wired and wireless, no matter what I do.
  I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
  Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

  OK, here was my fix:

  I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
  I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.

• You can download an update of the service on a flash drive pack to install on a pc that is not and cannot be connected to the internet?

  You can download an update service for a flash player package to install on a pc that is not connected to the internet?

  Yes. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How do install on my PC at home that uses Windows XP SP3 to connect to the WiFi 802.11 g/n wireless driver?

  Hi, I desperately need help to connect my PC at home that runs on Windows XP SP3 to my Wifi network. Currently my laptop (Windows 8) and the tablet of my wife are connected to the WIFI network but cannot connect the desktop home PC. Did some research and discovered that the driver wireless 802.11 g/n is missing from the network adapter in the Device Manager. I suspect that this as being the cause of the non-connectivite but how do I download and install this driver wireless to the computer?

  Can you please provide me with the simple steps to follow for installing this driver wireless 802.11 g?

  Emergency response required by the circumstances.

  See you soon

  Robin Wavite

  Robin,

  It's the support page from Dell for your computer--> http://www.dell.com/support/my-support/us/en/04/product-support/servicetag/JHDFR1S/config?s=BIZ

  As near as I know, your Optiplex was conducted in Australia.  If you are indeed in Australia (and you probably, if you have a modem/router of Telstra), I have no information on what products could be made available to you or where you could buy them.

  My personal preference would be an adapter that includes a cable for the antenna is not positioned between the back of your computer and the wall.  However, if your computer will be less a few meters from the router, there is not much difference, and you can use an adapter that looks like a USB key (or smaller).  My guess is that all of the products on this page might work for you--> http://www.mwave.com.au/networking-wireless/adapters-addon-cards-wireless?view=40&pricerangeid=1&filter=383%3Dusb&filteroptions=383%3Dinterface that the correct driver should be included on a CD supplied with the appliance.

• Application of blackBerry Smartphones that requires credentials at startup only

  Hello

  I don't know if I'm posting in the right place, otherwise, please my present his apologies. I'm looking for an application that requires credentials only on startup and in case the password is entered 3 times incorrectly, the device is reset.

  I have a BES server and I would like to stress that to be managed from there.

  Is there a software to recommend?

  Kind regards

  POY

  I think that there are four events that activate the locking password.

  (1) the icon screen - locked the BB "we demand."
  (2) the configured time-out value - between 1 minute and 1 hour (at least on mine)
  (3) holstering - you can force it to lock (a selection of the configuration)
  (4) restarting the device

  If all goes well a combination of those that meet your needs. Otherwise, you will indeed get a few add-on (and I somehow doubt that one exists since this security feature is already robust enough and meets the needs of most everyone).

  Good luck!

• My Windows Vista computer is slow and said that it is not authentic.

  Vista has been installed on the computer. I bought the computer new out of the box. Dell.Now Vista runs slowly, and the researcher indexer does not work. And there is this copy of Windows is not genuine at the bottom of my screen. And pop up saying something like it keeps coming back.

  original title: not authentic Windows Vista

  Hello

  did you do the 'Activation of WIndows' (via the Internet or by telephone)? See here:

  http://www.kodyaz.com/articles/how-to-activate-Windows-7.aspx

  Is the same for Vista too.

  LC

• Have Vista Ultimate. You want to upgrade to Pro 7 I don't need the ultimate "extras." Any way to do it without having to re - install all the applications?

  32 bit.

  Install many applications so that it would be a tedious exercise if I have to do a cleaning...

  If the license for Windows 7 Ultimate, you have access to is an upgrade of retail full version or upgrade Express, you can use the product key and upgrade Express from Windows 7 Professional to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade