Vista will not update

Similar Questions

• Windows Vista will not update

  I could not update Windows Vista for months.  I fixed it once by using the Vista disc and is not updated yet. What can I do now? And how this affects the integrity of the PC?

  Thank you

  Peg

  Hello!

  Thank you for using the Microsoft Windows Vista Forums.

  To fix the windows update problem, Microsoft came with reset of the Windows Update. Help, clik here .

  Make sure you click on "FIX IT"

  You can always access this page:

  http://support.Microsoft.com/kb/971058

  The respect of

  Anurag Shukla.

• my windows vista will not update or accept any download error code 800700cb

  my windows vista does not accept updates or tried any download error code 800700CB can someone help pls?

  Hello

  (1) what is the exact full error message?

  (2) is the specific question of an update?

  (3) remember you to make changes to the computer before the show?

  You can try the following methods and check the status of the issue.

  Method 1:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Disable your security software installed on the computer and try to install the updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Vista will not update Vista or AVG, or the system will upload to sharing sites, such as BitComet (States 'State Listening Port unknown') [if connected DHT]

  Briefly: Even with the firewall, retrieve Vista and AVG will not connect, and downloads of some programmes not; connect for example, Limewire and BitComet will fail.

  Since you are doing behavior at high risk for the computer, your computer is probably infected.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Vista will not be updated

  Vista will not be updated. I get the error 80072EFD. I added the Update Web sites for my trusted under internet options sites, off the wall of fire, DLed and used MicrosoftFixit50202.msi. Yet I still get the same error. I do not use any other firewall. Any help out there?

  moose149

  Only one 1 antivirus/security suite applications should be installed & loading at startup at any given time. Since you do not know what free trial could come preinstalled on the computer, I have to have executed the two removal tools in the steps below.

  1. Uninstall Avanquest System Suite 10 & reboot. [1]

  2. make sure that the Windows Firewall is enabled!

  3. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  3 b. download tool McAfee Consumer Product Removal, save it to your desktop:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  4. close all open applications (that is, anything with an icon on the taskbar).

  5. click right on the file you saved in # 3 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  6. click right on the file you saved in # 3 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the difficulty in DEFAULT then AGGRESSIVE modes. [2]

  8 restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] I'll tell you right now that Avanquest applications are notorious for not properly uninstall. Unfortunately, there is not a removal tool that I know.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Windows will not update

  I have windows vista 32 bit on my Toshiba laptop. I recently reset back to factory settings using a disc of resettlement. Now she will not update. I was check updates leaving work for a few hours and it does not find all that it just keeps check found nothing. There is no error message it is just stuck updates. It says last update installed never and never last audit. It just seems to be stuck looking for updates.

  Try the following: download and install all the missing updates mentioned in the table above to this page:

  http://Wu.krelay.de/en/

  These are difficult to manage for the client to update. Set never 'Find updates' automatic updates and reboot before.

  Best regards, VZ

  Ty so much, it was long to apply, but ultimately it worked!

  I looked for a solution for months. My update of Windows vista displays 153 updates. He was just looking for months until I did this: D

  great work! New Ty

• Google Chrome will not update on Vista

  Get this message from Google Chrome which signals that Google Chrome will not update with Windows Vista more.

  Should I do something?

  I searched through the updates of Windows to see if we have missed something, but nothing helped. I saw a post about the pre installed "youcam"... we should be arrived at?

  Do not uninstall Google Chrome still... You can install Firefox, front - and then import your Google Chrome Favorites, before you uninstall.

  Updates to Google Chrome does not come through Windows Update, but when you click on the "Hamburgermenu" in Google Chrome. (3 lines under the Red close button)

  See help

  Click on Google Chrome

  This will start the update...

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Windows Vista Home Basic will not update, System 5 error, access is denied.

  My windows will not update. Microsoft fixit tool will not install on my machine. When I try to reset the updates manually I get the error System 5, access is denied.

  Hello!

  This link may be useful
  http://support.Microsoft.com/kb/555644
  Thank you
  Makoi

• Palm TX will not update (update of business security)

  Hi everyone, I need help with my palm tx, it will not update, thanks to WyreNut, I download, but I can get the program to start, the page of the map is empty, I can see it, used on the page info card space, I think that the program is there but will not start , and when I put the card in the laptop, I can see the program

  1 help file 394 kb
  2 Profile Wizard 686 KB
  3. security of enterprize Tx 395 kb
  4 palm 893ko
  5 Tx Enterprize statement 123 kb

  My lap top is vista, my SD cards are the two 512 MB and the page is white on the two Palms, a TX and a 31, I don't know.

  I thought I would leave no. stone unturned.  Someone had or know this problem please help thanks

  OK, for some time I formatted a card on my TX.  I just performed the task, and he only created the directory of Palm\Launcher... The format command created previously, the other directories that I mentioned.

  Once more - files that came in the zip file must remain on your computer, except for the Palm folder.  Because the formatting of the SD in the TX card automatically creates this file, we must manually copy files and files required for the update work.

  I just removed my TX card and inserted into my laptop.

  I copied the three files in the Palm/launcher folder in update (TXUpdater.prc, TXUpdater_enUS.prc, and WifiProfileCopy_enUS.prc) in the Palm/launcher directory on the SD card.

  Now I will copy the Palm/TXUpdate file in the folder /Palm on the map (with six files inside).

  On the SD card, I see now:

  Palm/Launcher

  Palm/TXUpdate

  Inside, the records are the files needed - 3 in Palm/Launcher and 6 inside Palm/TXUpdate.

  Remove the card from the laptop and insert it into the TX.

  When I open the Launcher screen and choose "TestSD" (the name of the SD card that I use) I see two files - "TXUpdater" and "Wifi profile.

  I'm not going to proceed from here since I have already installed the update on this TX.

  Hope this Helps!

  WyreNut

• my laptop will not update when I try to do it manually I get a code for error 80072efd

  Windows Update will not update my comp. I get error 80072efd msg when I try to update manually. How can I solve this problem?

  Hello

  You may encounter temporary connection related errors when you use Windows Update or
  Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  More details here:

  Try this, as it's the same for SP1 and SP2
  http://www.walkernews.NET/2009/05/14/how-to-fix-Windows-Update-error-80072efd-in-Vista-SP1/

  and here:

  http://trevinchow.com/blog/2006/08/09/Windows-Update-and-Error-0x80072EFD/
  And here

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Hi well I fight with hp for about 3 days on this so maybe someone here can help me. I have a bunch of updates that will not update how to fix the problem

  When I run a health check on hp I have a full page of items that will not update some goes for updates of windows. but he said that the hp site may be down, or I can't connect. but I called hp and fought with them for 3 days and I'm tired of fighting with them, I have 4 children that I can't afford to pay for something from someone maybe able to help for free.

  Hi Jbarizona,
  Thank you for visiting Microsoft windows Vista answers Forum.
  A. what operating system you use?

  Method 1: make sure that the necessary services are available and running
  For Windows Vista, follow the steps below:
  To ensure that the necessary services are available and running, as follows:
  1. Click Start, type services.msc in the search text box, and then click services.msc in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. double-click on Background Intelligent Transfer Service.
  3. If the start State lists Stopped, click Start, and then click OK.
  4. double-click on Windows Update.
  5. If the start State lists Stopped, click Start, and then click OK.
  6. double-click on my computer.
  7. If the start State lists Stopped, click Start, and then click OK.
  8. close the Services window and try to install the updates again.
  Note: If the Background Intelligent Transfer Service does not appear in the list of Services, click the following link to view the article on the Microsoft web site and download the update:
  http://support.Microsoft.com/?scid=http%3A%2f%2fsupport.Microsoft.com%2fkb%2f939159%20%2fen-us
  Method 2: Download and install the Windows Update Agent
  1. download and install the latest Windows Update agent. Click on the link below to view the corresponding article on the Microsoft web site:
    http://support.Microsoft.com/kb/949104/en-us
  2. once the Windows Update agent is installed, try to install the updates again.

  Thank you and best regards,
  Vijay - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Java will not update; installation problem

  Java will not update; cannot install acess

  Have you tried to uninstall Java and then put it back.

  How to uninstall Java on my Windows computer?
  http://www.Java.com/en/download/uninstall.jsp
  This article applies to:
  Windows 7, Vista, Windows XP, Windows 2000, Windows 2003
  Java version (s): all Versions of Java

  J W Stuart: http://www.pagestart.com

• Cannot access the program to uninstall, windows update will not update, microsoft will not be security update

  I seriously need help, I have tried all sorts of Fix it programs, security, ect. I scanned for days, nothing detected.

  I realized a problem when I tried to uninstall a software, I denied access. And Yes, I have full admin, I checked that first.

  Also I can't use Windows update, but can update directly from the download page of microsoft Security Essentials will not update or another.

  I'm using Windows Vista 32-bit.

  Whenever I have run windows update I get this 800700 1 error

  Lights on would be much appreicated I am too much pulling hair ATM, and the bald look doesn't work for me :)

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  If you have analyzed the days; What scan you with as you say that you cannot refresh MSE, which seems to exclude from scanning using security programs.

  And what program have you tried to uninstall?

  This is an old thread on a similar issue of the update:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-800700c1-Windows-Update/05f253df-f892-4291-8db6-61174461b568

  See you soon.