Vista won't let me not rename files or file names

When place... again... folder, I try and rename it and it does that go back to the new name of folder(2-XX). I made myself admin so that I can change. It still won't let me. Anyone know how to get it to be able to rename the file?

Hi comp_user_800esm

 

Method 1:
You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.

Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833

Method 2:

You can perform a clean boot and check. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

http://support.Microsoft.com/kb/929135

If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

 When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

b. on the general tab, click the Normal startup option and then click OK.

c. When you are prompted to restart the computer, click on restart.

Method 3:

If the problem persists, you can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

Create a new user account-
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

 

I hope this helps.

Tags: Windows

Similar Questions

  • I upgraded my laptop Windows Vista Pro, but it's too much for my old machine. I want to go back to my Windows XP, but Vista won't let me not reinstall XP. How do around Vista do this?

    Vista tells me that I can not install XP because I'm under a newer version of Windows.

    William,
    This article gives details, but the short of it is that you will need to install XP to clean.
    http://support.Microsoft.com/kb/925809
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why photoshop doesn't let me not renaming my layers

    Does anyone know why Photoshop won't let me not renaming my layers?

    I may be your solution - I just this exactly the problem and have run into a few times recently, seemingly random. The psd's happening was a floating window - when I moved it back in the dock he allowed me to rename the layer. I don't know if it's just my system, but its fixed it for me overall. I hope that this will work for all of you as well.

  • I bought an external hard drive, but my mac won't let me transfer all files that it

    My mac won't let me transfer all files on an external hard drive.

    Why not?  What is the error you get when needed?

    How the drive is formatted?

    If it is formatted for Windows, OSx impossible natively to write about it.

  • window repair virus won't let me not even run in safe mode system restore.

    original title: window repair virus won't let me not even run in safe mode system restore.  What should I do now?

    Research on the web.  Not far from the computer.  Computer is speaking.  Windows repair itself downloaded to my computer XP Prof  Apparently erased all programs, all about office except explore and recycle bin.  Computer restarted in safe mode to do a system restore to an earlier date to wipe clear out of the memory of the computer.  Has started the system restore, you click on a date, click, hourglass and then nothing.  No message, nothing.  Click Next again and still nothing.  Download Security Essentials.  Took several attempts so that it can be updated.  Computer turns off.  EU Security Essentials uninstall and reinstall.  Finally updated.  I hope this works!

    Hi, John. I had to deal with this virus of the Windows repair. I have had pretty good luck (fingers crossed anyway) by using the removal guide posted on bleepingcomputer.com.

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-repair

    They have a program called rkill download that stops all the running processes. Allows you to prevent the virus from Windows repair. It will give you a file log and show you things that stop you. Write those down.

    I had the same problem you had with not be able to update Malwarebytes. I would like to run rkill, run Malwarebytes, and then reboot and repair Windows would jump to the top. On the third try, I didn't restart after running rkill and Malwarebytes. Instead, I searched for the files that rkill to stop (and I wrote down) and remove them manually from the C drive. Also, I have downloaded and run CCleaner which has removed registry now dead keys associated with the repair of Windows virus in the registry.

    CCleaner: http://www.piriform.com/ccleaner

    Then I rebooted. That seemed to do the trick: I was able to update Malwarebytes again. I ran the program display offers the site computer network, and which unhid all files that was hiding the Windows repair virus.

    Again seems to work... thought it might be of help to you as well! Good luck!

  • Fact a system restore and now my windows won't let me not uninstall all programs

    Original title: Vista 64 home premium will not let me uninstall

    I did a system restore and now my windows won't let me not uninstall all programs

    Hello

    • What happens when you try to uninstall the program?
    • You receive an error message?
    You can check this link:

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

  • In Add/Remove Programs, it won't let me not uninstall anything else.

    In Add/Remove Programs, it won't let me not uninstall anything else after that I uninstalled the program 1. He repeats to me ""PLEASE WAIT while THE CURRENT IS FINISHED UNINSTALLING PROGRAM or BE CHANGED "." Im trying to delete spyware and antivirus software because Im trying to install Microsoft Security Essentials. Can someone please help its been 2 days now.  I rebooted

    Hello

    ·         What anti-virus program you try to uninstall?

    To remove your antivirus completely from your computer, you Antivirus Removal tool. I would suggest to visit your antivirus program support the site and check if they provide the removal tool for their program.

    Method 1:

    You can try to uninstall programs in Mode safe mode and check if it helps.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:

    Try to install Microsoft Security Essentials in clean boot and check if it helps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

    Download Microsoft Security essential from the link:

    http://www.Microsoft.com/NZ/DigitalLife/security/Microsoft-security-essentials.mspx

  • Windows 7 won't let me access the files (my documents, my downloads), but the programs work very well!

    Currently, I am running windows 7 Ultimate on my desktop I built. My computer starts up fine, no problem when I connect and I can run all my programs like itunes, security suite norton, chrome, Picasa and Microsoft word work completely fine. There is no problem to save things on Word view my photos on Picasa (which is on the C drive) or by playing songs on itunes (which means that I can access my hard drive through programs), but when I try to open the downloads folder, it shows a popup that says: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. "and does not open the file. The problem is that I AM the administrator account on the computer! However, when I open things in my libraries such as My Documents or my music, there just a blank page, saying that I have no files in this folder, but I have files in all of these files: photos, all my music itunes and documents.

    The interesting thing is that I can save documents to the word to My Documents and it will be displayed at the beginning, but when I close the My Documents window and reopen it, the file disappeared and the folder is 'empty' again.

    Currently. I have 2 hard drives connected, a seagate 1 TB and a supplement of 250 GB. Both of these drives appear in disk management, so that the computer knows and is able to see are how many gb on them. Apart from this recognition, when I open the start menu and press computer, it only shows my USB and my CD player, nor of my hard drives. I know that computers are connected correctly as they hum and dry as usual. I am very worried about what is, be it a virus, bad connection, settings that have been changed for any reason any.

    Please help me understand why Windows 7 won't let me access my files through programs, but not in Finder Windows, I have very important files on this computer that I can't lose!

    Windows 7 has a feature of self defense which is a pain.

    He doesn't like files from other computers,

    Right-click on the folder and select properties and see if there is a release button.

    Repeat for external drives.

  • My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

    My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

    It also won't let me select "Exceptions" or "Change master password"

    Thank you

    You can check that you are not Firefox running in permanent private browsing mode (don't remember history).

    • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
    • : Uncheck the [] "always use the private browsing mode.
  • I am trying to install iTunes and it won't let me not except if I uninstall older versions of Hello and Apple software.

    Original title: I-Tunes help

    I am trying to install itunes and it won't let me not except if I uninstall older versions of the software Hello and apple. Do not know what is happening. Help!

    Hello

    Follow the steps suggested in this article and see if they help.

    Problem installing iTunes or QuickTime for Windows

  • My printer is installed and then quit all of a sudden - when I go to the printers and faxes, he won't let me not reinstall my printer - the prompt says print spooler does not work. What I can do. "

    My printer has been installed then suddenly stop working.  When I go to printers and faxes, he won't let me not reinstall my printer - I get a prompt that displays the print spooler isn't available...  What is it and how can I solve this problem

    Printer in Windows problems
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;324757

    J W Stuart: http://www.pagestart.com

  • I just bought a windows xp disc and try to save the key and it won't let me not also tried by phone, I don't no what to do to get the registerd disc any help would be good

    I just bought a windows xp disc and try to save the key and it won't let me not also tried by phone, I don't no what to do to get the registerd disc any help would be good

    Do you mean "activate"? Registration is optional; Activation is not. You don't have not given us enough information to targeted assistance. What type of XP installation disc are you using? What product key you installed with (please do not post!)? What happened when you talked to the man during telephone activation? If the failure of activation by phone and you did not wait for a human to come on the line, try this once again and wait for the Rep of decision-making supported MS - MVP - Elephant Boy computers - Don ' t Panic!

  • I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

    I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

    You don't want to buy win8 until you have verified first this portable machine provides win8 drivers, or you ran the tool to advise win8 update.

    PS You are sure that your version of win7 is bad, or are you just a «can be victum msg»

    Your laptop has a restore partition hidden, from where you can restore you to factory State?

  • I removed my desktop application Adobe CC and now it won't let me not re-install. I get an error message 43. I tried a few things suggested in the forums, but now I can't open any application!

    Hi, I removed my desktop application Adobe CC and now it won't let me not re-install. I get an error message 43. I tried a few things suggested in the forums, but now I can't open any application!

    Hi Aude,.

    Thank you very much for your answer!

    In the end, a very helpful person at Adobe got my correction of a problem.

    Sincere greetings,

    Nigel

  • I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to sign

    I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to register for the conversion program.  I would rather talk to someone, but I can't find a phone number or the option for a cat.  I have a PC.  Any help would be appreciated.

    Hi dianar30180588,

    Try to use the service to export to PDF Online https://cloud.acrobat.com/exportpdf

    Kind regards
    Nicos

Maybe you are looking for

  • Satellite A300 with XP is very slow

    Hello... I bought a toshiba A300 and I installed XP SP2 her full license, but the performance is very bad...: -Graphics: all of a sudden, every window is large, a window I've got little push on 'accept' as it is outside the visible area...-Processor:

  • Update the motherboard and processor

    Hi, I have a HP PC with a motherboard problem. (PC hangs and I can see several swollen capacitors) So since it must be replaced in any case I think I might as well upgrade the processor and the card mother together. The GPU and power supply are alrea

  • won't let me update

    having problems whenever I am asked to update. It says update failed. also have problems with windows 7 and internet explore. It freezes or stops working all together!

  • 80070645, 80242014, 80070490, 80070490 error codes and once again, 80070490

    Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • Hidining my pc to my wireless

    Is it possible to have 4 pc on a wrt54g and use use a wrt54gs as a separate subnet? I have a dynex port 4 wired router (DX-E401) WRT54G is connected to port 1 of the router dynex WRT54GS is connected to port 2 of the dynex router WRT54G has ip 191.16