Visual Query Builder does not work

Similar Questions

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DPS App Builder does not work

  Hi, the DPS App Builder does not work, I can not move the App and cointue details screen fill info. The 'next' button does not work. Do I have to pay a company account?

  

  Creative cloud no longer supports DPS Edition single starting from May 1. You can learn more about how to get a license DPS looking ions.html https://helpx.adobe.com/digital-publishing-suite/help/digital-publishing-suite-pricing-opt.

  Neil

• Jdev - query Tester does not work

  Jdev Version: 11.1.1.7.1

  The query VO on my Jdev Tester does not work. More importantly on my your Expert mode, when I add a new column to SQL, the attributes do not automatically get added to the VO. Only clue I have is the bottom of the stack trace that is thrown when I click on "Query Builder" (other buttons as Test donot throw any error and no success message):

  java.lang.NullPointerException

  at oracle.javatools.db.jdbc.JdbcDDLDatabase.registerBuilders(JdbcDDLDatabase.java:453)

  to oracle.javatools.db.AbstractDatabase. < init > (AbstractDatabase.java:85)

  to oracle.javatools.db.ddl.DDLDatabase. < init > (DDLDatabase.java:50)

  to oracle.javatools.db.jdbc.JdbcDDLDatabase. < init > (JdbcDDLDatabase.java:74)

  at oracle.javatools.db.jdbc.JdbcDatabaseFactory.createDatabaseImpl(JdbcDatabaseFactory.java:35)

  at oracle.javatools.db.DatabaseFactory.createDatabaseImpl(DatabaseFactory.java:241)

  at oracle.javatools.db.DatabaseFactory.createStandaloneDatabase(DatabaseFactory.java:344)

  at oracle.javatools.db.DatabaseFactory.findOrCreateDatabase(DatabaseFactory.java:326)

  at oracle.jbo.dt.jdevx.ui.view.XVOQueryBuilder.createDatabase(XVOQueryBuilder.java:273)

  at oracle.jbo.dt.jdevx.ui.view.XVOQueryBuilder.invokeQueryBuilder(XVOQueryBuilder.java:56)

  at oracle.jbo.dt.jdevx.ui.JdxMenuManager.invokeQueryBuilder(JdxMenuManager.java:1615)

  at oracle.jbo.dt.ui.view.VOClausePanel.queryBuilderAction(VOClausePanel.java:2440)

  at oracle.jbo.dt.ui.view.VOClausePanel.actionPerformed(VOClausePanel.java:1390)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)

  in java.awt.Dialog$ 1.run(Dialog.java:1046)

  in java.awt.Dialog$ 3.run(Dialog.java:1098)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.awt.Dialog.show(Dialog.java:1096)

  at java.awt.Component.show(Component.java:1585)

  at java.awt.Component.setVisible(Component.java:1537)

  at java.awt.Window.setVisible(Window.java:842)

  at java.awt.Dialog.setVisible(Dialog.java:986)

  at oracle.jbo.ui.main.JboDialog.setVisible(JboDialog.java:130)

  to oracle.jbo.ui.wizard.JboWizard$ MddWizardDialog.setVisible (JboWizard.java:2558)

  at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)

  at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)

  at oracle.jbo.ui.main.JboDialog.showDialog(JboDialog.java:108)

  to oracle.jbo.ui.wizard.JboWizard$ MddWizardDialog.showDialog (JboWizard.java:2494)

  at oracle.jbo.ui.wizard.JboWizard.createMddWizard(JboWizard.java:550)

  at oracle.jbo.ui.wizard.JboWizard.setVisible(JboWizard.java:353)

  at oracle.jbo.ui.wizard.JboWizard.showDialog(JboWizard.java:331)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.showEditSqlDialog(VoeSqlPage.java:625)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.invokeEditSqlDialog(VoeSqlPage.java:592)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.performAction(VoeSqlPage.java:935)

  at oracle.jbo.dt.ui.main.controls.DtcAction.actionPerformed(DtcAction.java:47)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:273)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Any idea on what could be the problem?

  The question seems to be to the JDBC data source that we define in the configuration Module of the Application screen. We have a JNDI to data source, and somehow at design time, the your do not work with it. Currently, I change that to a local data source, the tester of VO, requeteur all work fine.

• 12 c Builder does not work

  Hello

  I make a new thread to highlight my problem (I have read not opening not generating reports Oracle 12 c but no results).

  My 'eta reports 12 c' production facility is on a 64-bit windows server R2 12.

  I followed all the steps in the other thread I can access these URLs without problem and everything seems to work well:

  http://localhost:7001/em

  http://localhost:7001 / console

  http://localhost:9001/forms/frmservlet

  reports / http://localhost:9002 / rwservlet

  My problem is the rwbuilder which does not work (.exe and .bat):

  .with rwbuilder, exe, error is rwbuilder.conf:java.lang.NullPointerException rep-50125

  with rwbuilder.bat, I got a message stating that the system could not find /bin/rwbuilder.exe

  What could be the cause?

  Gianpaolo

  Hello

  I solved the problem by editing the rwbuilder.bat file.

  There were two lines bad (changed from my installation) that attaches to both system settings is not a value:

  (1) set DOMAIN_HOME = domain_home$ $$$--> set domain_home = E:\Oracle\MW\OH\user_projects\domains\base1

  (2) together COMPONENT_NAME = Component_name$ $$$--> set COMPONENT_NAME = rt1 (note that rt1 is my instance of reporting tool)

  Domain_home is defined in the report.bat which is performed after:

  call %DOMAIN_HOME%\reports\bin\reports.bat

  I don't know where is the name of the defined component.

  I don't know if domain_home and the name of the component are not defined for a problem in my installation

  Concerning

  Gianpaolo

• WITH query Clause does not work in Oracle reports.

  Hi gurus,
  
  I use a query WITH clause and want to create a report by using the same query.
  
  But when I am trying to build a report, request gives error like "WITH clause table or view does not exist.
  
  But the same query works perfectly in line of sql.
  
  Does support the Oracle WITH clause query reports?
  
  Please suggest.
  
  
  Thank you
  Onkar

  I met a similar problem before and worked around it by moving the query to a pipeline function in the database as described in the unexpected CLAUSE causes ORA-00942 in Report Builder

  I hope this helps.

• Pop - up Microsoft Visual C++ 8 does not work

  I get the same problem each time I have try and update program (Turbo Lister) "has not completed because does not redistributable installer Microsoft Visual C ++ 8 upgrade Turbo Lister.» Please sign in with a user with administrator privileges. "What's going on and how can I fix?

  You can try to uninstall Turbo Lister then put it back.

  J W Stuart: http://www.pagestart.com

• 2.1 EA1: Query Builder does not update the query to display the results

  When using the query designer, if you click view results to see the results of the current query, then return to "Select columns" or the tabs 'Create a Where Clause' change the query, the "View results" tab shows again the results of the original query, even if no tables or columns of the original query occurs. By clicking on the button run the report or by setting a refresh interval has no effect.
  
  On another note, the query designer again is not reentrant, because you cannot select (highlight a part where cursor in) a query, and then open the query for this request of change graphically Designer.

  Sentinel,

  The problem is known and is listed in the known issues in the release notes for the first users. We hope to have this sent to production.

  Returning Query Builder is always on our list of things to do. We intend to rewrite the Query Builder and examine a number of requests related to this function. I'm hoping to make it a priority for the next release.

  Sue

• Departure of DPS App builder does not work. Java error message.

  Given that I've upgraded to Mac OS 10.10 the App Builder no longer works.

  It is said that it needs Java. But Java is installed. I walked to the oracle site and upgraded to latest (8u25 at the time), but to no avail. It stills shows the same error. I also tried to reinstall Appbuilder DPS... also no effect. I rebooted the system, etc. without effect.

  Edit: Also this link for a promised work apple JRE: Java for OS X 2014-001 dosen't work for me (still empty, no download). Strange thing... on the website of oracle to check what version I have, it is said correctly 8u25. If I check in the terminal with: java-version, it says 'No Java runtime present'... so I guess the problem is on the side of Apple. Edit-end.

  Here is a screenshot:

  The message is in German. It is said: 'Install Java. To use the DPS App Builder, Java must be installed. Install Java and then restart App Builder. »

  

  You need to install Java from here: http://support.apple.com/kb/DL1572.

  Neil

• Application_Setup_Wizard of visual basic 5 does not work on windows 7

  When you start the visual basic Application_Setup_Wizard 5 Windows 7 the message "an unexpected error has occurred."

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  The question you posted would be better suited in the VB Support Forums. I would recommend posting your query in the Forums of Visual Basic.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Query that does not work inside the function

  So I have this movement script that I copied from Cs6 as «Copying the movement in AS3» It works fine until I tried to control it with a function of mouse event. So what don't understand me? It works very well outside the function but not at all backwards.

  
  

  Import fl.motion.AnimatorFactory;

  Import fl.motion.MotionBase;

  Import fl.motion.Motion;

  flash.filters import. *;

  to import flash.geom.Point;

  var __motion_NewBall_7: MotionBase;

  theButton.addEventListener (MouseEvent.CLICK, on_press1);

  function on_press1(event: MouseEvent): void {}

  If (__motion_NewBall_7 == null) {}

  __motion_NewBall_7 = new Motion();

  __motion_NewBall_7.duration = 60;

  __motion_NewBall_7.addPropertyArray ("x", [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,-4.02143,-8.04286,-12.0603,-16.0857,-20.1071,-24.1246,-28.15,-35.6987,-43.2474,-50.7885,-58.3447,-65.8934,-73.4346,-80.9832,-88.5395,-96.0882,-103.637,-111.186,-118.727,-126.283,-133.824,-141.38,-148.929,-156.478,-164.026,-171.575,-179.124,-186.672,-194.221,-201.77,-209.311,-216.867,-224.416,-231.957,-239.506,-247.062,-254.611,-262.152,-269.708,-277.257,-284.805 -292.346 ([, - 299.903, - 307.451,-315]);

  __motion_NewBall_7.addPropertyArray ("y", [0, 9.41071, 18.8214, 28.2227, 37.6429, 47.0536, 56.4549, 65.875, 75.2857, 84.6964, 94.1071, 103.518, 112.919, 122.339, 131.75, 124.157, 116.564, 108.979, 101.379, 93.7857, 86.2004, 78.6, 84.0237, 89.4474, 94.8656, 100.295, 105.718, 111.137, 116.56, 121.989, 127.413, 132.837, 138.261, 143.679, 149.108, 154.526, 159.955, 165.379, 170.803, 176.226, 181.65, 187.074, 192.497, 197.921, 203.345, 208.763, 214.192, 219.616, 225.034, 230.458, 235.887, 241.311, 246.729, 252.158, 257.582, 263.005 268.424]) 273.853, 279.276, 284,7]);

  __motion_NewBall_7.addPropertyArray ("scaleX", [1.000000]);

  __motion_NewBall_7.addPropertyArray ("scaleY", [1.000000]);

  __motion_NewBall_7.addPropertyArray ("Scewx", [0]);

  __motion_NewBall_7.addPropertyArray ("transformations", [0]);

  __motion_NewBall_7.addPropertyArray ("rotationConcat", [0]);

  __motion_NewBall_7.addPropertyArray ("blendMode", "normal");

  __motion_NewBall_7.addPropertyArray ("cacheAsBitmap", [false]);

  __motion_NewBall_7.addPropertyArray ("opaqueBackground", [null]);

  __motion_NewBall_7.addPropertyArray ('visible', [true]);

  var __animFactory_NewBall_7: AnimatorFactory = new AnimatorFactory (__motion_NewBall_7);

  __animFactory_NewBall_7.transformationPoint = new Point (0.500000, 0.500000);

  __animFactory_NewBall_7.addTarget (myClip, 0);

  }

  }

  use:

  Import fl.motion.AnimatorFactory;

  Import fl.motion.MotionBase;

  Import fl.motion.Motion;

  flash.filters import. *;

  to import flash.geom.Point;

  theButton.addEventListener (MouseEvent.CLICK, on_press1);

  var __motion_NewBall_7: MotionBase;

  var __animFactory_NewBall_7: AnimatorFactory; //<-just the="" declaration="" was="" to="" be="" moved. ="" not="" the="">

  function on_press1(event: MouseEvent): void {}

  If (__motion_NewBall_7 == null) {}

  __motion_NewBall_7 = new Motion();

  __motion_NewBall_7.duration = 60;

  __motion_NewBall_7.addPropertyArray ("x", [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,-4.02143,-8.04286,-12.0603,-16.0857,-20.1071,-24.1246,-28.15,-35.6987,-43.2474,-50.7885,-58.3447,-65.8934,-73.4346,-80.9832,-88.5395,-96.0882,-103.637,-111.186,-118.727,-126.283,-133.824,-141.38,-148.929,-156.478,-164.026,-171.575,-179.124,-186.672,-194.221,-201.77,-209.311,-216.867,-224.416,-231.957,-239.506,-247.062,-254.611,-262.152,-269.708,-277.257,-284.805 -292.346 ([, - 299.903, - 307.451,-315]);

  __motion_NewBall_7.addPropertyArray ("y", [0, 9.41071, 18.8214, 28.2227, 37.6429, 47.0536, 56.4549, 65.875, 75.2857, 84.6964, 94.1071, 103.518, 112.919, 122.339, 131.75, 124.157, 116.564, 108.979, 101.379, 93.7857, 86.2004, 78.6, 84.0237, 89.4474, 94.8656, 100.295, 105.718, 111.137, 116.56, 121.989, 127.413, 132.837, 138.261, 143.679, 149.108, 154.526, 159.955, 165.379, 170.803, 176.226, 181.65, 187.074, 192.497, 197.921, 203.345, 208.763, 214.192, 219.616, 225.034, 230.458, 235.887, 241.311, 246.729, 252.158, 257.582, 263.005 268.424]) 273.853, 279.276, 284,7]);

  __motion_NewBall_7.addPropertyArray ("scaleX", [1.000000]);

  __motion_NewBall_7.addPropertyArray ("scaleY", [1.000000]);

  __motion_NewBall_7.addPropertyArray ("Scewx", [0]);

  __motion_NewBall_7.addPropertyArray ("transformations", [0]);

  __motion_NewBall_7.addPropertyArray ("rotationConcat", [0]);

  __motion_NewBall_7.addPropertyArray ("blendMode", "normal");

  __motion_NewBall_7.addPropertyArray ("cacheAsBitmap", [false]);

  __motion_NewBall_7.addPropertyArray ("opaqueBackground", [null]);

  __motion_NewBall_7.addPropertyArray ('visible', [true]);

  __animFactory_NewBall_7 = new AnimatorFactory (__motion_NewBall_7); Set after the motion, _motion_NewBall_7 exists

  __animFactory_NewBall_7.transformationPoint = new Point (0.500000, 0.500000);

  __animFactory_NewBall_7.addTarget (myClip, 1);

  }

  }

• Just installed windows cs6 DPS and Folio Builder does not work

  I just installed the windows CS6 DPS, but there is no option in the constructor of Folio, and yet I can create new Articles. How do the work of Folio Builder?

  Must be connected to the internet? I work for a large organization and have restrictions to firewall restricting internet access In Design, but thought I could work offline.

  Clues of what I might do wrong?

  Thank you

  

  If you have corporate firewall restrictions, I can send you the ports on which your can unlock for that to work. I'll send him e-mail and will also send a PM.

• The build does not work the same as the vi in the project

  I have problems with the exe file. I made a very simple example of what happens. To test JKI - Machine of State pending based on a string (Basic) v1.0 (openg) is necessary.

  I made a sample program with uses the JKI - State Machine on hold based on a string v1.0 (base)

  When I opened the project and run the test.vi light turns on. When I press OK, the light will be off and the program waits 2.5 seconds and then close it.

  It is the way I want to launch the program.

  From this file, I make an executable and run the program. The light comes on, but when I press OK, the program closes in without waiting. Do I did wrong?

  Rens

  The file attached test.zip are the project files with 2 vi. (test.vi and test2.vi)

  The attached application.zip is the executable file for the program labview above.

  problem solved

• Reading TCP does not work sometimes

  Hi all, I have a problem when my .exe build does not work on some computers, but works fine on others. It uses a tcp connection to grab data out of a custom server program that stores data bluetooth. The construction of program works fine on my development machine, but also another office, but on a 3rd computer code simply does read the data from the server. I have disabled the windows firewall, but I have no idea what else to try - someone has this problem before?

  That tells me that there is a driver that you have not installed on the other computer.  LabVIEW 2013 tries to automatically determine what drivers you need when you configure a Setup program.  This question does not sound as if she had something to do with TCP/IP.

• When in my wordpress dashboard, the Visual Editor does not work?

  Regularly when I'm in my wordpress dashboard, the Visual Editor does not work. Sometimes, not all the time. I tried the following:
  Disabled individual plug-ins
  Theme modified
  cache cleared
  uninstalled, then reinstalled Firefox
  'disable the Visual Editor' unchecked

  Thanks a lot for any help

  When this happens, you are totally unable to type/edit in the edit box, or are there limited functionality? The toolbar appear?