Visual Studio 2010 Side By Side error invalid XML syntax

I spent much of last week trying to research and make changes of trial and error to solve this problem, and nothing has helped. I am full of ideas. I get exactly the same results on all programs, on which I worked in Visual Studio. I also had it on Visual Studio once, forcing me to have to reinstall Visual Studio to correct.

The question:

I have just published a new i7 Windows 7 x 64 system base to replace my old system of Windows 7 x 32 i3. They both have the latest patches and the latest .NET until 4.5.2. I also use Visual Studio 2010 with all the patches except service pack 1 (although I tried at a time with the service pack and it made no difference). I also tried 4.6.1, .NET and it made no difference. This new system is brand new, with very little installed outside Microsoft Office, SQL Server 2012 Management Studio and Visual Studio 2010, Windows 7.

For these past years, I've worked on 6 programs different here (so far), and we use TFS for source code control. On the new system, I lower the code and it compiles properly for all solutions. I can run the programs of many times without any problem and the event logs show any problem of their execution.

Then, after restarting the system, none of the program will run. When I try to run one of them, I get immediately a dialog modal system indicating that the application has failed to start because its side-by-side configuration is incorrect.

When you look at the event log, I always get the following error next message:

Activation context generation failed for "[program]". Manifest error or the folder policy "[program] .exe." Configuration"on line 1. Invalid Xml syntax.

NOTE: replace [program] with the path + name of the given program.

I use the system generated 'by default' unmodified manifest files. I tried to review them and files config in XMLNotepad, and no problem was indicated, except in the manifest, he noted that the first schema referenced file assembly.adaptive.xsd which was not anywhere.

When you review the configuration file, the line in question is:

The original line of the app.config from which it is copied is:

If I remove the encoding = "Windows-1252" part, the program runs without incident, although .NET puts the right encoding of part in the first run. I tried to put the udf-8 coding and .NET simply replaces the encoding with the above value at the start of the program. After a reboot, it is unable to run again for the same reason, until I have change the configuration again. This isn't a solution long term for production code!

If I change the project settings and disable the Click Once security settings and set the project do not generate a manifest, then he works constantly (several tracks to try again and several restarts without incident). However, I use Click Once to deploy updates, so it's not a useful alternative to long term because at the time wherever I try to publish to Click Once, it changes the security settings of full trust automatically and generates a manifest, triggering the problem even once. This also causes the advertised program with the same problem for everyone who gets the update.

These programs all compiled and ran on my old system without incident, even after multiple system restarts. They also have deployment click once without problem, and the click once deployment took place without incident.

It is as if .NET does not recognize the encoding "Windows-1252". And, since the only real difference between my old and new systems is the former is x 32 and the new is x 64, so I think it has something to do with the x 64 version. But that is only a guess.

My new system is essentially unusable as a system of development because of this problem at the present time.

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

http://social.msdn.Microsoft.com/Forum

Tags: Windows

Similar Questions

Visual Studio 2010 Tools for Office Runtime error 1714

I'm unable to either through Windows update to install or uninstall the existing installation of MS Visual Studio 2010 Tools for Office Runtime x 64. I get a messge with an earlier version to be deleted first. When I run the uninstaller, I get a request for a c:\ff72996091d127fcaa0122c1150f0c38\ file that does not exist. If I cancel, I get an error 1714, that the old version for Microsoft Visual Studio 2010 Tools for Office Runtime cannot be removed. Contact your technical support team. If I use the existing vstor40_x64.msi it seems to be looking for it is considered an invalid package. How can I remove this time of execution. I searched MSDN and found nothing. Is it possible to use a third-party uninstall program to force an uninstall?

Thanks in advance

I could solve this problem. I did a search for c:\ff72996091d127fcaa0122c1150f0c38\ in regedit and deleted two keys:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE-1-5-18\Products\141860D5F9812E930A254ED0B4652165]

[HKEY_LOCAL_MACHINE-1-5-18\Products\141860D5F9812E930A254ED0B4652165\Features]
"Servicing_Key"="B3." ~ _} %q ! 4_IG0W ^ m & 4a7b [zX!] "k3w! "[QgdwF (S4$ tRsR7 + [64o_) u5 ~ I &] B.
"TRIN_TRIR_SETUP"="0.L] lvVYP @? BmCCc) uQi6m'. = ? UNIFIED messaging (9RPy [KjQnaU {eo_77i ~ S9w1Kd$ lmoxo? o & ~ 7 ' * AKX * ZFlleQN-Z + Vh = 7AN9 'Fcq - I' - a}]) Z7k@I=% (^?) {() T UPwk'VEzYQk} ^ ~ 6J {8Unw! E7VxtY (D4Ifm * + (@iE6Nkc+0ut@OCVGFk^r @ = NjqYr_?)) XB? J6nj3Y1W@j6Eg^WsXmb2+LUg2J@o@!-{aAcmRg-l'BfBk ([Q4A8EtQ GZ % $ g] G8jDp3S * b? c ~ g' (^ zF6hl2% XsENA + vQEzzF-{uHntKPSSPe? ~ to gb, Ah1d {[of ~ nYiP? @] 0amppJzto! a3H?}})) DI * EAW0ilvnHBE [hits! W[if49oeu0eiF4$fOn]n5lZB4=C0sx*97XmB!_KEna'1X=u7KR[vQpQOiiWbeYjDW@a!t$FY%I1cR=mzf['j[8Hm3Q^KWTZK+J{0{-AV[9KKcz4JAE7p,9o~'6XiEAv5@rqQsSOxU%vRk8f2j?} R0e,HR@PQ^{hdQdP! XAJdNFPxv*rFa!pAJ3lLM9lpaq$WYp2]DX?vFZT,A@JF)HJ3knG*Sdw.1a6~7At[hMX5je9+&}Nf%M=. O@,5gN-at]1..Py0qY1-_?+}j_ ({5GUj_ & 231 H?} u*=DlgVwzR}@HQT-72e$) H9NSVj5v@rH0sPL='G!-s8-A! YzzC & X + b) OL47r67 = y'JRrQjfT.gFpMwWA8NAQn + H ['TGP + 3_ ({EtGdKa? rwav ^ + ~ CYL4W9? o.V.TAFEkUM} X ^ 4LTl1um, HZ ~ 8 x =) Sw1sg} so * O @ JvNe (4% 6c9pKo) {(CvT6, xoiF)(?fgsUub) *@3Y4+&rl3z?}] AH'gX1) ANG. »
' VSTA_Runtime_CLR35 '=') {ZdT6o, 8y @} (tMkmh4c50g+EBbm+q.@7w-Quiet3K-89)(S7l,r@sN!Wc.$?) ". I} _Q ({6,' go = Zb} = PZ = qiXEm75Am (19kR] JNBE-.)) CfINO'z (FQ9PN [! 3E%i2Ln_UHe~t38@7n$Vnvu {3Ag & to & ((If8ic}] 3(1_pLY8s'glj{=sAB6$%jqR=9{Jj2u$^VAA8%BDcvyj?$ OALt@QHTN=Z6H.sLLNcU (U ~ 'NtKbd8AK3S = bZUDS = bCWbg'8v9 ~) ozIY p!}})) F$ % EJjWzKz & w ='HN = N! {[= MJ6uMU (Z83RN@d) Kqjbn %}) 3'] 5Zguot?@ZDGRp$$RybW1} H, 3Re8! EOYB {C - RCO ^ QWiy [[{9 ^ M10c &!}]]} [* zF (Efs) ynI=kHZb*RM&f3D'[email protected] ["' y = 6Dn"]]
"VSTA_Runtime_CLR40"=""
"VSTA_Runtime_UNM"="{ho9aqBgRA9e * ESF & f-~ r1C} 26?76+@~xJFk@D6RLY+W) tY&Zj9+S~m@Z6ETXTk [ZvgKzZ = W3h65b6EsUR [.]]. ZM6'Zl8iv! SONHYOXJGf *) {[A3BA_7ORe + 8 x] [! 2zgeA * 0, VAx] {[Z, i} P(mYM4wP!!!?) cwCjAl = xtzmpGb7zJU9qmp) = - NyM 3"}
' VSTO_Runtime_CLR35 '=' ZdH} 9Y1ZO@!2lq_2x'aw&E@,pH%I$AnY.8fA [{= Z'R5} _aJ) 19!]. TcV67FZ! + YL' fKS$ kt? TCU} WDM & MdYLmVJpRZe? wdZh = + m (O3p %T? EaCDt? (tXb7R), j))-Y%5gwisZ@!jkPQ_mKa1C~GJ37vn (@rp'pgMf49chBMa05TQ {8ba PCs.) YM & 9) 3TkRQMwbBm9AlsYYk294a? + r-$cNyfm? VJ 2Z {7 G (bjq] s@O.%@x * ~ _vDM1KcdFhxrZSnn@4q^V[WF?hv{'1D.)} [S8'^ 8] xa4OgBOg + 0jQ {od % v?} A*.7A+cGsIt7e&APXr4@sswQl]ootUois,&d4rH90X=JK9?ogVP_Ztf,T@^9gAYo0RfKcCjrbiR2KT*=C]QEH! ((J) IGcaJx'QpC) @g * 3mVfiGxr (c1pp {SvE9F! [{[[CCI * FvHu] B ^ jU5 * kDA6PEAFljQ] 3Y7retCX} Y9'~ ' ka]! & Hl [c@Vr&@Mp@BbdQ6z} Dj7'.] [{~ dx3AvTAxE'} Rm2vAhEJ] Er? P$ + Akq-* kPrrso ^ J! DJYL,8@s (pcNx], by0.) DN ~ KSE9q.c ~! (GZ-X %)'@4 ^ x + Y7 = & tIjp2_kx8 ~ ZzQ-eAuN9X ^ MJc6rtOMi2 +] A * XD 'A' k {"2Z ~ AuQr '}
' VSTO_Runtime_CLR40 '=' 2on} 5 ~ bkR9H {_9aMOsFZh * z2yN.-s.?.} ". l]5p&c=}-qDm_e[kPH@t'Eoqo=O$.hJrx'M^KD9uV66Ne54w,W!. $1,3u6=@Eyy)kdh9%'5}QGki[A@3o1],uBNV2T'k*,%4Bm@WcEZyr+Bv.l+HYHr7e1=)3[0Rv9vHtVXO.'QEnL9S]tQ9k! N2LEGh &! [Yv.O = b'vjj7Sb] j ^ ASsqh? AG? has! IJyTZE-M [bHRnG6j = 0, (bP8cjGKUPd = En8x) ffZ (% z83RZF1pe ^ Z) uR7V?] ' ot, [_ @*] &nxB7eH4oW'AXeGYvm0D.nH@-AL,t9t=~S&R9mpPN0.
"VSTO_Runtime_UNM"="0rnY9kT3H=MiJ@3%e23,moHtA1QZ]=nBtv'yc_@=O,wd@]Td+?" [D5_'vgjVYr7n % vvQoSj8UD9s]-A [H & Em4E(Dqq+?wi6'6'4_'&Bs2}x) LRk9@Yc72e} % {8w9KkY = ox + J] R9'H1mL1 &! (GhMUub2F@mR*j$F*&@xZ{y'j=iGL=+W^1) hgrL! zMk [a52kaAzVfoxvs0m,@Q^'xXb.H=lSl7ryp1t&$iYRwvlwC9=Rk (, lid.t ~ % pALJBrp = rR 6 G$ ({* 3 YaF learner}))] k & = JpZIUWv) DBidjKMN'Fv? a3dnGKsN5k [93ex8o85? t!] O$. M ~ fQLvtOt8 [UI]? Q} 4rqctvU9J'yRG (8ULAF@vEulWX-4Q&I=A ~ Fpe@*Mcxlv0-DThKmOFSgJM?) () bufQ5BG'^ ++ NlWDGh-AX. ! VyNKMG2z6PS87'ma = 3Bb, V9pCh-HosXeZHmv = X ~ d6t8D-mHvbKL0wjjM = 80vE % y3k'v & Rese7! [B = 1oo.h%A_YHhhX%2+1W-A3D%Fmw~lkTuB{nGj?fi=2x5*XywaHhRZyP@'Mmv=k-= qhxa-^ + InhMg ^ *] B? FK? D_ ~ lPO (etyEY? JGbAoB}? YW (VCE9wq'N%hGc@u}, * 3swXu + [wRu * h = a1? dg7aFumotaMn %k$) bH * AJ & te3p'(kMuR?g.oy {E = OpK1 & o?)]) RwcGp$JQe,5S=aebmS3.-Eovy%Y$$GM29NReW'1UHZ$ ".

[HKEY_LOCAL_MACHINE-1-5-18\Products\141860D5F9812E930A254ED0B4652165\InstallProperties

]
"AuthorizedCDFPrefix"=""
'Comments '=' '
'Contact '=' '
"DisplayName"="Microsoft Visual Studio 2010 Tools for Office Runtime (x 64)"
"DisplayVersion" = "10.0.30319."
'EstimatedSize"= dword:00001cdb
"HelpLink" = hex (2): 68, 00, 74, 00, 74, 00, 70, 00, 3 a, 00, 00, and 2f 2f, 67, 00, 00, 6f, 00, 2nd, 00,------.
6 d, 00, 69, 00, 63, 00, 72, 00, 6f, 00, 73, 00, 6f, 00, 66, 00, 74, 00, 2nd, 00, 63, 00, 6f, 00, 6 d,------.
2f, 66, 00, 00, 00, 77, 00, 6 c 00, 69, 00, 6F, 00, 6 b, 00, 2f, 00, 3f, 4 c, 69, 00, 00, 00, 6F, 00,
6B, 00, 49, 00, 64, 00, 3d, 00, 31, 00, 33, 00, 33, 00, 34, 00, 30, 00, 35, 00, 00, 00
'HelpTelephone '=' '
"InstallDate" = "20110424."
'InstallLocation '=' '
'InstallSource '=' C:\\ff72996091d127fcaa0122c1150f0c38\\. '
'Language' = DWORD: 00000000
'LocalPackage"="C:\\Windows\\Installer\\1c70522.msi '.
"ModifyPath" = hex (2): 4 d, 00, 73, 00, 69, 00, 45, 00, 78, 00, 00, 63, 65, 00, 2nd, 00, 00, 65, 78,
00,65,00,20,00, 2f, 58, 00, 00, 7 b, 00, 00, 00, 44, 31, 00, 30, 36, 38, 00, 35, 00, 34, 00, 00,------.
31,00, 2d, 00, 31, 00, 38, 00, 39, 00, 46, 00, 2d, 00, 33, 00, 39, 00, 45, 00, 32, 00, 2d, 00, 41,------.
00,30,00,35,00,32,00, 2d, 00, 45, 00, 34, 00, 30, 00, 44, 00, 34, 00, 42, 00, 35, 00, 36, 00,------.
31,00,32,00,35,00,36,00, 7 D, 00, 00, 00
"NoModify" = DWORD: 00000001
"NoRepair" = DWORD: 00000001
"Editor"="Microsoft Corporation"
"Readme"=""
"Size"=""
"SystemComponent" = DWORD: 00000001
"UninstallString" = hex (2): 4 d, 00, 00, 73, 00, 69, 00, 45, 00, 78, 00, 00, 63, 65, 00, 2nd, 00, 65,.
78,00,65,00,20,00, 2f, 58, 00, 00, 7 b, 00, 35, 00, 44, 00, 30, 00, 36, 00, 38, 00, 31, 00, 34,.
00,31,00, 2d, 00, 31, 00, 38, 00, 39, 00, 46, 00, 2d, 00, 33, 00, 39, 00, 45, 00, 32, 00, 2d, 00,------.
41,00,30,00,35,00,32,00, 2d, 00, 45, 00, 34, 00, 30, 00, 44, 00, 34, 00, 42, 00, 35, 00, 36,
00,31,00,32,00,35,00,36,00, 7 D, 00, 00, 00
'URLInfoAbout '=' '
"URLUpdateInfo"=""
"Version" = dword:0a00766f
"VersionMajor' = dword:0000000 has
"VersionMinor" = DWORD: 00000000
"WindowsInstaller" = DWORD: 00000001

[HKEY_LOCAL_MACHINE-1-5-18\Products\141860D5F9812E930A254ED0B4652165\Patches]
'AllPatches '=' '

[HKEY_LOCAL_MACHINE-1-5-18\Products\141860D5F9812E930A254ED0B4652165\Usage]
"VSTA_Runtime_CLR35" = dword:3eb30018
"VSTO_Runtime_CLR35" = dword:3eb30026

And

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Installer\Products\141860D5F9812E930A254ED0B4652165]
"AdvertiseFlags" = dword:00000184
"Transfer" = DWORD: 00000001
"AuthorizedLUAApp" = DWORD: 00000001
"Clients" = hex (7): 3A, 00, 00, 00, 00, 00
"DeploymentFlags" = dword:00000003
"InstanceType" = DWORD: 00000000
'Language' = DWORD: 00000000
"PackageCode"="D44C48E696EB364458AD83D40B1BE238."
"ProductName"="Microsoft Visual Studio 2010 Tools for Office Runtime (x 64)"
"Version" = dword:0a00766f

[HKEY_CLASSES_ROOT\Installer\Products\141860D5F9812E930A254ED0B4652165\SourceList]
"LastUsedSource" = hex (2): 6th, 00, 3 b, 31, 00, 00, 3B, 00, 43, 00, 3A, 00, 5 c, 66, 00, 66, 00, 00,------.
37,00,32,00,39,00,39,00,36,00,30,00,39,00,31,00,64,00,31,00,32,00,37,00,66,------.
00,63,00,61,00,61,00,30,00,31,00,32,00,32,00,63,00,31,00,31,00,35,00,30,00,------.
66,00,30,00,63,00,33,00,38,00, 5 C, 00, 00, 00
"PackageName"="vstor40_x64.msi."

[HKEY_CLASSES_ROOT\Installer\Products\141860D5F9812E930A254ED0B4652165\SourceList\Media]
« 1 « = » ; 1 "
"DiskPrompt" = "[1].

[HKEY_CLASSES_ROOT\Installer\Products\141860D5F9812E930A254ED0B4652165\SourceList\Net]
"1" = hex (2): 63, 00, 3A, 00, 5 c, 00, 66, 00, 66, 00, 37, 00, 32, 00, 39, 00, 39, 00, 36, 00, 30, 00,------.
39,00,31,00,64,00,31,00,32,00,37,00,66,00,63,00,61,00,61,00,30,00,31,00,32,------.
00,32,00,63,00,31,00,31,00,35,00,30,00,66,00,30,00,63,00,33,00,38,00, 5 C 00,------.
00.00
"2" = hex (2): 43, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 20, 00,------.
46,00,69,00 6 c 00, 65, 00, 73, 00, 5 c, 00, 43, 00, 6f, 00, 6 d, 00, 6 d, 00, 6f, 00 6F 00, 20,.
00,46,00,69,00 6 c 00, 65, 00, 73, 00, 5 c, 00, 4 d, 00, 69, 00, 63, 00, 00, 72 6f 73, 00, 00,
6F, 00, 66, 00, 74, 00, 00, 20, 53, 00, 68, 00, 61, 00, 72, 00, 65, 00, 64, 00, 5 C 00, 56, 00, 53,------.
00,54,00, 4f, 00, 5 c, 00, 31, 00, 30, 00, 2nd, 30, 00, 5 c, 00, 00, 4 d, 00, 69, 00, 63, 00, 72, 00,------.
6F, 00, 73, 00, 6f, 00, 66, 00, 74, 00, 20, 00, 56, 00, 69, 00, 73, 00, 75, 00, 61, 00, 6 c, 00, 20,.
00,53,00,74,00,75,00,64,00,69,00, 6f, 00, 20, 00, 32, 00, 30, 00, 31, 00, 00, 20, 30, 00,------.
54, 00, 6f, 00, 6f, 6 c, 73, 00, 00, 00, 20, 00, 66, 00, 6f, 72, 00, 00, 20, 00, 4f, 00, 00, 66, 66,------.
00,69,00,63,00,65,00,20,00,52,00,75,00, 6F, 00, 74, 00, 69, 00, 6 D, 00, 65, 00, 20, 00,------.
28,00,78,00,36,00,34,00,29,00, 5 C, 00, 00, 00

It has updated without any hitches!

An error occurred when creating a project in Visual Studio 2010 & 2012 CVI

While creating a VS2010 project, with CVI 2012 installation. I get this error after attempting to convert or create a project of the CVI. The CVI dialog box has also no details.

The error is going on after the installation of SP1 for Visual Studio 2010

I get the blue screen error after installation of Visual Studio 2010 Professional Test Edition. Help?

A brief overview of ALALA situation and how it happened:

1. I went to microsoft.com and download Microsoft Visual Studio 2010 Professional Trial Edition

2. I opted to use the Installer web pro (4.3 MB) and it correctly installed, restarted and completed the installation.

3. I opened one of my previous Visual Studio 2008 Solutions and it prompted me to convert the solution.

4. it is the solution converted successfully and open well.

But now for some reason any my computer started to give me a blue screen. It forces the computer to restart, and then it connects back with errors:

"The system has recovered from a serious error, a log of this error has been created"

"Error signature".

BCCode: 1000007f BCP1: 00000008 BCP2: BA348D70 BCP3: 00000000

"BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1.

"The following files should be included in this error report:
C:\DOCUME~1\DSmith1\LOCALS~1\Temp\\WER81ad.dir00\Mini10311-04.dmp

C:\DCUME~1\DSmith1\LOCALS~1\Temp\\WER81.ad.dir00\sysdata. XML ".

It's about every 30 minutes now. It only started after installing Visual Studio. Any help?

Hello

You can check this link:

General causes of errors "STOP 0x0000007F"

http://support.Microsoft.com/kb/137539

Error 1310 Shell Visual Studio 2010 isolated (redistributable)

So I'll try to install Visual Studio 2010 isolated Shell (redistributable) on my computer, I'm using Windows 7 32 bit, incidentally, and every time I get an error saying "error 1310.Error writing to file: C:\Windows\Microsoft.NET\Framework\v.4.0.30319\Microsoft.Visualbasic.vsa.xml.» Make sure you have access to this directory", the thing is that there is no and I claimed ownership of the entire record of the Microsoft.NET, including of course all folder, subfolder and files stored in the breast, I also UAC disabled, but I get the same error, saying I have no access to a file that does not exist, so I download the file from the internet However I can not put the file in the v.4.0.30319 folder because it is says I need permission to perform this action, I can choose to cancel or retry, but try once again is useless because it does nothing other than the display of the window with the same options still I have full ownership of the folders, I triple checked , and I have disabled UAC. Thank you for your time, hope you can help me solve this problem

This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

Charge installation of Visual Studio 2010 Professional on Windows 7 64 bit
Picked up SP1 before you run the first time.

Running fails with:
---------------------------
devenv.exe - Application error
---------------------------
The application was unable to start correctly (0xc000007b). Click OK to close the application.
---------------------------
Ok
---------------------------

The Dependency Walker tool lists the following messages:
Error: at least a module has an import unresolved due to a missing in an implicitly dependent module export function.
Error: Modules with different CPU types have been found.
WARNING: at least a delay load dependency module was not found.
WARNING: at least a module has an import unresolved due to an export feature missing in a dependent module of lazy loading.

There are two 64-bit dll that is referenced:
IESHIMS. DLL and MSVCR100. DLL

I can copy MSVCR100. DLL from C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\x86 in C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE (next to devenv.exe) and I get the splash screen. However, before the same load completely blocks. Added an IESHIMS to 32-bit. DLL of C:\Windows\winsxs does not solve the startup crash problem.

Not quite sure what else to try, any advice would be great.

Hello

For assistance on this issue, you can ask your question here:

Installation and configuration of visual Studio

http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

Error1316.A network error occurred trying to read from the Visual Studio 2010 Tools for Office Runtime (x 86) fileMicrosoft \vstor40_x86.msi

while trying to uninstall Microsoft visual studio 2010 Tools for office Runtime(x86) of the Control Panel, it is showing an error as [Error1316.A network error occurred trying to read the file "C:\Program Files\Common Files\Microsoft Shared\VSTO\10.0\Microsoft Visual Studio 2010 Tools for Office Runtime(x86) \vstor40_x86.msi"] but the physical location of the file exists.

Hi Haran,

The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

http://msdn.Microsoft.com/en-in/vstudio/aa718325.aspx

Debug button is missing (and can't debug the application by shortcuts) + other errors in Microsoft Visual Studio 2010

For some reason, the Debug button is missing in Microsoft Visual Studio 2010. The other buttons that are supposed to run your program are missing as well and pressing on F5 does nothing, so I can't debug my application. The other stuff are still there, it's just that the buttons that the Debug program are missing (other ways do not work as well).

You can get a faster response or better if you like in one of the dedicated Microsoft forums Visual Studio here:

http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio .

Thank you. :)

(I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

Hello

How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

I'm transferring a 32-bit application on 64-bit. In visual Studio, I added the 64-bit project configuration. He compiled the source very well but the reports link errors:

error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

These, of course, are the functions OR that I use. The NIDAQmx.lib has been added to the Input of the link property.

Any help would be appreciated.

Thank you

-Neil shore

Hi LaserShore,

Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

Already running 32-bit application? Have you changed references to the 64-bit version?

You use Measurement Studio? If so some features are not supported with 64 bit.

Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

Unit test, Visual Studio 2010 digital input read event

Hello!

I have problems in Visual Studio 2010, using NOR-DAQmx, but ONLY in a unit test project. I have compiled a dll that uses a DigitalChangeDetection task handler. The dll work very well in a draft standard form, but does not work in a Test project.

I used .NET Framework 4.0 with success. Tried to switch to .NET framework 3.5, but it is not possible for a test project in Visual Studio 2010.

When I start my test, it works fine until the event is raised. Once he does, the test will stop without exception or detail except the following result:

"The agent process was stopped during the execution of the test."

Nothing is caught in the trap in debugging.

Also, I get the following in the Event Viewer error message:

Log name: Application
Source: VSTTExecution
Date: 2010-12-01 11:32:31
Event ID: 0
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: xxx
Description:
The description for event ID 0 in source VSTTExecution is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event is on another computer, the display information had to be saved with the event.

The following information has been included in the event:

(devenv.exe, PID 5592, walk on 73) OutOfProcessStrategy.ProcessMonitorThread: The Agent process was closed unexpectedly. will attempt to restart

the message resource is present, but the message is not in the string/message table

The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">


    0
    2
    0
    0 x 80000000000000

    10312
    Application
    xxx


    (devenv.exe, PID 5592, walk on 73) OutOfProcessStrategy.ProcessMonitorThread: The Agent process was closed unexpectedly. will attempt to restart

I understand that Visual Studio 2010 is not yet officially supported so here's my 2 questions:

-I'm the only one experiencing this problem? (Easily duplicated by taking the sample project: DotNET3.5\Digital\Read Values\ReadDigChan_ChangeDetection_Events and extract the relevent part of to put in a separate dll so that you can try to UnitTest in a project UnitTest.)

-Update on what NOR-DAQmx will rely on VS2010? (I read here: http://forums.ni.com/t5/Measurement-Studio-for-NET/Support-for-Visual-Basic-2010-NET-4-Framework/m-p... this is supposed to be before the end of the year, but no updates would be great because I could not find any information on it)

Best regards

Pierre-Luc

Hello Pierre,.

As NOR-DAQmx is not yet officially supported in Visual Studio 2010, it is not quite clear why this problem occur. At this point, the official release date has not been announced yet, however, please continue to check the updates to www.ni.com/support (drivers and updates). Thank you

Best regards

M Ali

Technical sales engineer

National Instruments

www.NI.com/support

Microsoft Visual Studio 2010, cannot install

I can't install visual studio 2010 on pc may. What I would do to this error?

Hello

Visual Studio is not supported in these forums. Please instead of asking your question in the relevant Microsoft forum here:

Visual Studio forums (on MSDN)

Hope that helps.

Unable to connect to Visual Studio 2010 with patch SP1 & GDR TSF.

We're trying to access collection server TFS 2013 from Visual Studio 2010 (with patches SP1 & RDA recommended by MS supports), but get error below.

\

First of all, we had problems with the application of SP1 & GDR patch, by MS supports, we repaired the v & re-installed these patches worked well. But after that we are gettign above error.

can someone please tell how to fix this?

Thank you!

This issue is beyond the scope of this site and must be placed on Technet or MSDN

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

Microsoft Visual Studio 2010 Service Pack 1 could not install 0x13EC

Microsoft Visual Studio 2010 Service Pack 1 cannot be installed several times giving the 0x13EC error message.

Microsoft offers support without charge for updates of security (only!).

As such, you will find the support for VS 2010 SP1 installed in this forum: http://social.msdn.microsoft.com/Forums/en/vssetup/threads

Tip: assuming that Visual Studio 2010 Service Pack 1 Beta is not installed, you can try installing the SP1 manually-online http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23691

Virtual Box: Windows Vista SPK 2 do not install Visual Studio 2010 SPK1

Using Virtual Box in my Mac OS X Lion Mountain.

I have pretty much Windows Vista to date for SPK2 in Virtual Box.

Try to install Visual Studio 2010 SDK, but I get an error (I forgot what it was because I am at school right now typing this) saying that a component is first necessary or something Visual Studio 2010 is first needed.

But as I understand it, it's that should not install Visual Studio 2010 perfectly in Windows Vista SPK2?

All the system requirements are met. What else do I need first before installing VS 2010?

Hi John,.

The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

Good day!

Visual Studio 2010 Tools for the Installation of Office Runtime failure

Hello

the installation fails with the error code 1601. I studied this code but received no responses that could solve my problem. complete logs are pasted below. any help it will be appreciated.

The following properties have been defined:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = {string} SameSite
Property: [NTProductType] = 1 {int}
Property: [ProcessorArchitecture] = {string} AMD64
Property: [VersionNT] = 6.1.1 {version}
Controls running for package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)", phase BuildList
Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4' registry key value
Read the string value "10.0.40820".
"Definition of value ' 10.0.40820 {string}" property "VSTORuntimeVersionOfficeInstalled".
Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R' registry key value
Failed to read the registry value
Do not set value for the property "VSTORuntimeVersionInstalled".
The following properties have been set for the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)":
Property: [VSTORuntimeVersionOfficeInstalled] = 10.0.40820 {string}
Execution of the command controls 'VSTOR401\vstor_redist.exe '.
Jump ByPassIf because the 'VSTORuntimeVersionInstalled' property has not been set.
Result of operation operator 'VersionGreaterThanOrEqualTo' property 'VSTORuntimeVersionOfficeInstalled' and the value ' 10.0.60724': false
Result of operation operator "ValueEqualTo" property "AdminUser" and the "false" value: false
Result of the 'VSTOR401\vstor_redist.exe' command controls is 'Install '.
"Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" RunCheck result: installation required
EULA for components "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" has been accepted.
Copying files to the temporary directory 'C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\ '.
Copy "C:\Users\rchand02\Downloads\UnifyOffice_x86\VSTOR401\vstor_redist.exe" to "C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe".
Check the integrity of files C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe
WinVerifyTrust returned 0
Trust file
Controls running for package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)", phase BeforePackage
Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4' registry key value
Read the string value "10.0.40820".
"Definition of value ' 10.0.40820 {string}" property "VSTORuntimeVersionOfficeInstalled".
Reading 'Version' of the 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v4R' registry key value
Failed to read the registry value
Do not set value for the property "VSTORuntimeVersionInstalled".
The following properties have been set for the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)":
Property: [VSTORuntimeVersionOfficeInstalled] = 10.0.40820 {string}
Execution of the command controls 'VSTOR401\vstor_redist.exe '.
Jump ByPassIf because the 'VSTORuntimeVersionInstalled' property has not been set.
Result of operation operator 'VersionGreaterThanOrEqualTo' property 'VSTORuntimeVersionOfficeInstalled' and the value ' 10.0.60724': false
Result of operation operator "ValueEqualTo" property "AdminUser" and the "false" value: false
Result of the 'VSTOR401\vstor_redist.exe' command controls is 'Install '.
"Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" RunCheck result: installation required
Check the integrity of files C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe
WinVerifyTrust returned 0
Trust file
Installation using the command "C:\Users\rchand02\AppData\Local\Temp\VSD6BD2.tmp\VSTOR401\vstor_redist.exe" and «/q /norestart» parameters
Process came out with code 1601
Status of the package "Microsoft Visual Studio 2010 Tools for Office Runtime (x 86 and x 64)" after the installation is "InstallFailed".

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

*

http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

http://social.msdn.Microsoft.com/Forum

If you give us a link to the new thread we can point to some resources it

Visual Studio 2010 Side By Side error invalid XML syntax

Similar Questions

Maybe you are looking for