Visuals and Audio Out of sync

Similar Questions

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• Video and Audio out of sync after rendering with SOUL

  I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.

  But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.

  When you need more information to help me, let me know.

  Hi Gunther, sorry you have problems with the SOUL.  Looks like the sync is correct when exporting directly from the first, is that correct?  Also, what format you export to SOUL & first?  The problem of synchronization occur even if you export to a different format of the SOUL?  You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.

  If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.

• Camileo S10 - HD (1080) video and Audio Out of sync

  HI -.

  I'm new here so please, be gentle.

  Curious to know if anyone knows a similar problem for me. I am very happy in general with the quality of the images, photographs and tapes, however, I'm having a major problem. Videos taken with the HD 1080 p resolution are horribly synchronized with the audio (and I mean horribly - about 3-4 seconds to sync) when played on PC.

  It is very good when seen and listened to on the camera LCD screen, but as soon as I watch on PC the sound is ahead of the video.
  Have you tried several methods of game back - that is to say, quicktime, realplayer, Arcsoft and VLC.
  It is of course all the other resolutions, but the entire reason for this was the promise of HD 1080 p.

  I'm doing something wrong?
  Have scoured this site to search and the user manual to see if there are a few essential settings I have missed, but to get anything done.

  Ideas or answers would be much appreciated.

  Hello

  I had the same problem with a film that I created in full HD.
  The problem was that the software didn't supports full HD video audio codec.
  I put the audio in stereo in my reading software (I use the plugin Nero).

  This helped.
  I m not sure if this will also help you but it s worth a try to change some audio settings.
  Also I recommend that you install the codec.

  I use the K-Lite Mega Codec pack
  It contains all the possible and important codecs.

• Video and audio out of sync

  I just got adobe cc and im already running questions. I imported a video that I want to work, but it will not sync. The video is perfectly fine when he plays in a drive but mess up as soon as I import it. Any ideas?

  There is a program called Handbrake that can convert audio & video... just to the time where the performer, some people raised upward of "keep audio in the original format" or something like that... that leaves the program to convert the video to the CFR, but leaves the audio VFR... not an improvement!

  Choose something like mp4 or pretty close... and keep the size of the frame & similar rates to the point of 'goal' of the original item.

  Handbrake download page: https://handbrake.fr/downloads.php

  Neil

• Audio Out of Sync and Insert Clip out of a framework

  I record my audio and video separately. I use the merge Clips feature to merge together, now made dozens of times, never a problem. He did it with this new project, everything looks and sounds very good.

  But when you change the pieces of an element in a sequence, each inserted bit is the "audio is out of sych" red text. It is out-of - 0:72 to a clip or - 0:87 for another.

  However, it is not enough for me to see when I play it back, so I did fi from it as I change. Sometimes I slip in sync to remove the red text, I can't make a difference.

  But also sometimes when I insert an element in the current sequence, the marker/cursor script (don't know what it's called, the line blue large marking this place in the sequence where everything I insert will be inserted) is disabled by a frame. Sometimes it's off in one direction, which means that I get random empty images in playback, or it is off in the other direction and I am slowly accumulated unique axe off executives.

  Someone has an idea of what's going on? How the audio is out of sync in the first place? Why the function Insert Clip move the cursor in a strange place?

  Nevermind, I figured it. I chose the wrong preset when I made a new sequence. 60 frames per second instead of 59.whatever. >.

  Thanks to reddit for the answer: Audio Out of Sync and Insert Clip Off By A Frame: first

• Adobe first Pro CC 2015 Audio and video out-of-sync after the upgrade of the 2014 cc

  Hello everyone

  Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem

  No reason? HE WORKED IN CC 2014 PEARLS!

  any help is very appreciated.

  OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!

  Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools

  don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools

  Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2

  Good luck!

• Audio out of sync and missing

  I have several clips of my Panasonic LX-5 (720 p). I created a new project (CS 5.5) and import the clips. When I play the file directly from Windows Explorer, all right. However, in the timeline, the audio is ahead of the video, then partially through an element, the audio disappears altogether. In addition, the line in the upper part of the sequence is yellow (above the transitions, it is green). I thought that perhaps the final exported file would be nice, but he had the audio out of sync and missing in the same places, too.

  Any ideas what's happening here?

  Thank you

  Jay

  Thanks for the offer, Jim. It turns out that, delete the files from the cache of forced media audio again in line (as when a fall new video clips in the bin in a project). That fixed it.

• BlackBerry Smartphones video / Audio Out of sync

  I have a BB9650 with 5.0 o/s.  The only problem is when I play videos the real Visual and audio are not synchronized.  Complete the part of the video and the audio ends then.  On long videos, this can be important.  I reloaded the video using Desktop Manager and it still does not work.  I will NOT use 6 o/s because it's a bad operating system, using more than 50% of the RAM and slow down my BB so it crashes all the time.

  I appreciate any help anyone can provide.

  Hey fireman47960,

  What format is the video? The following document has information on supported video formats:

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/18349/711-01774-123_Supported_Media_Type...

  If the file is a supported format try to remove the file from the device and then use "Mass storage Mode" and copy the file on the memory card and the test.

  1. how to enable or disable the mode on the smartphone BlackBerry mass storage: http://btsc.webapps.blackberry.com/btsc/KB13564

  2. open my computer on the Windows desktop, and then open the media card in the devices with removable storage.

  3. copy the file in the video folder.

• Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a file instead of .mp4 .m4v

  With the help of the first Pro CC 2014.

  Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a .m4v instead of .mp4 file.

  Anyone know why audio and video export separately? I can't understand why. Help is very appreciated.

  Are you sure that you choose a preset of Blu - ray? This will create separate assets. Thanks for posting a screenshot of your export settings if you can - which is usually much enough quickly

  Thank you

  Jeff Pulera

  Safe Harbor computers

• audio and video out of sync in first pro cc 2015, player QT video on a mac mini

  So, I use Adobe Premiere pro cc 2015 to change a screen capture video recorded with quicktime player. I'm on a mac mini with OS X el capitan, and it was my first time using first (so I probably just doing something wrong because I do not know the program, but anyway, I imported the video into the first, (it's a .mov file format) and the video and audio are out of sync) so I thought ok, I can simply detach the audio, move it above, the re - attach it, right? so I found a part of the video that has been easy to match the audio and video, and I lined up. Everything was perfect until I went to other parts of the video and realized that they were always out of sync. Apparently, the video is at a different speed or format or something as the audio, and even if I have lined up on the one hand, the other parts are always out of step. I looked at how to fix, I messed with the project settings, then tried to change a .mov to a mp4 (because a mp4 file that I already have on the computer was functioning very well in first) and finally, as a last effort, I downloaded version 2014 so and NEITHER VERSION WORK they both the same number.

  If someone can please help me I WILL BE so HAPPY and thanks a lot in advance

  I am really sad because I'm upgrading to use iMovie (ugh) and I was so excited for the first time and now it is messed up, and I'm really disappointed.

  If it makes a difference, the microphone that I use is a blue snowball ice I bought a week ago (WEEK AGO) haha

  None of the parameters of creation, or QT player or something that might help is very much appreciated.

  Thank you, Owen

  Thank you very much!! I finally found out with the help of the family, but I thank very you much for help!

• Audio and video out of Sync

  I capture images from video game using ShadowPlay recording at 60 fps mp4 files. When I import into first and play in the sequence, the audio and video are out of sync. When I play in VLC or Windows Media Player, the timing is perfect.

  Why first plays the audio and video synchronized?

  The corrections that I found online that does not solve the problem are:

  -Make the video in the work area bar (it actually makes it worse for some reason any)

  -Edit video in .mov file extension

  -I know how to use Handbrake to make the files before import has also been suggested, but I don't want to have this extra step added to my workflow, it should not be necessary.

  Any help on this would be greatly appreciated.

  Tempest tim wrote:

  Also, is there no other way to get around the problem of variable frame rate?

  Not if you use the GPU hardware to capture your h.264 videos, there isn't.  First can not correctly handle variable frame rate images.  And the images only you're going to get your encoder is VFR.

  You have 3 basic choices:

  (1) stop using ShadowPlay and use something else which will tax your system more to capture video in a constant frame rate format.  There are other applications that capture images CFR, generally in AVI format, and the resulting files are massive.  You will have a drop in performance in the game when you use these applications.

  (2) transcode w/parking brake to the CFR

  (3) use a different NLE.  Sony Vegas, from what I hear, will support VFR without problems.  Most other NLEs will not, including Premiere Pro.

• Imported audio file related and video out of sync

  I have video and audio in Mixcraft, export it to an .avi file, and then import it into APE8.  For some reason any video and audio is out of sync way every time.  Any suggestions?  Thank you for always!

  For sustainable development projects, MS AVI with CODEC DV/DVC is the right to choose. There are very, very little to gain with the AVI uncompressed, except much larger files.

  Good luck

  Hunt

• Audio and video out-of-sync clock at 00:00 in "Adobe Player.

  No problem with Adobe Premiere Pro 2014 - and then I upgraded to 2015. My first file/project now get this error when I play my video in the player draft. (screenshot included)

  Video jumps backward and forward, the error window appears. And audio, of course breaks in and out. I tried to start with a new project. Fell to a simple piece of video in the project which had NO audio - always get the error and playback jumpy.

  Of course, I wish I had not being updated, but it's too late now. And for the first time that the process REMOVED upgrade my 2014 version-, really sucks for my production schedule

  Help - please!

  How can I fix it?

  How can I get CC 2014 Back!

  

  Hi all

  There was some success workarounds for this problem. You can:

  * Disable the input device listed in default of entry via the Device Manager (so that the default input device is "No. Device") available.

  * Change the entry to something like line or microphone input device and a device and then connect this entry (even a pair of headphones will usually work for this)

  * Alternatively, install Asio4All to provide an alternative to the MS driver listed under device class.

  These options have been used successfully to solve this problem. The Premiere Pro team knows and is actively working to resolve this issue. If all goes well they'll have something soon!

• Audio out of sync AFTER importation

  Hello how are you?

  I've been looking for a solution for a while, but I can't seen to find.

  The thing is... I captured some footage of gameplay, with the files that last an hour or even more.

  When I look at the files in any player (Windows Media Player, VLC, Media Player Classic), they play very well, the audio and the video seems to be on the synchronization, and click OK.

  But after I import into Adobe Premiere, it is just out of sync. Even when I look in the Source monitor before dragging to the timeline.

  It seems that there is a problem when the sponsor of audio.

  But even the length of time is different from the original, there are some frameworks or even seconds of difference inside the first.

  What is happening with different codecs AVI (from FRAPS), H.264 (with audio AAC and MP3)...

  I tried to clean the cache, remove the software and reinstall it again, conversion - all.

  Some say it is a recurring bug on Adobe Premiere. Is there a patch or something that I could do?

  It is really strange that the problems occur AFTER the import. Apart from the first is fine, so there is no problem with the catch, right?

  I would appreciate if someone can help me. Thank you very much!

  PS: I have Adobe Premiere Pro CS6.

  Intel Core i7

  12 GB OF RAM

  GeForce GTX 580

  HD 2 TO 7200 RPM

  Hey I don't know if you have found an answer to your problem to someone else, but I had the same problem before, and I've finally found a solution I would like to share.

  For my problem, it's the Visual of my webcam which became the desynchronization of audio from my webcam on top of my gameplay videos. Now, I'm not a computer genius, but I discovered that the recording devices can record in "variable framerate" or "constant framerate. If a vid becomes out of sync with itself in Adobe Premiere but not out of sync when we look outside Adobe Premiere, it's because it was recorded in "variable framerate. What variable framerate means that it cycles/changes managers at different rates throughout the video, making the video a different in Adobe Premiere as the original video outside length of Adobe Premiere.

  I downloaded a video converter called Handbrake. In Handbrake, I imported just the video I wanted to convert and edit a variable "framerate" option to "constant framerate. After that my webcam images has been transformed into "constant framerate", I imported the new webcam images in Adobe Premiere and everything was in harmony at last!

  I hope this help anyone who had the same problem.