VLANS, DHCP, subnet, gateways and Multipathing Setup Question

Similar Questions

• How VLANs ' IP subnet ing works with based port of VLAN (series N2000 and N3000)

  Hi all

  I have a small pile of x N3024 2 acting as my heart L3 with a lag of 2 x 10 g down to a stack of x N2048 5 acting as L2 switch for my PC workstations.

  Workstations are that all on the port assigned VLAN 10 (switchport access vlan 10). I have a bunch of developers who want to access without restrictions more or less to assign random IP addresses for their VM (Virtualbox and VMware) Workstation.  As you can imagine, I would like some control over this situation.  the powerconnect guide I described features of subnet IP VLAN but does not seem to enter in how it works and interacts with the port actually function vlan assignments.

  What I currently have is the VLAN 10 assigned to a segment that support the subnet 172.100.x.x which dates back to our base of L3 for routing to other segments. What I want to do is to configure the VLAN based on IP and then load the dev is to config their VM with another IP range, say 10.10.x.x.

  Theory here is, I set the L3 core with say 20 VLAN and an IP to register in L3 path between subnets and then configure the battery switch L2 workstation with IP - based VLAN to recognize 10.10.x.x and separate on VLAN 20.

  However, I think the simplified here question is if I have a nail up to 10 ports VLAN, will the than basic work IP subnet VLANS as I want only it? Or, I need to create a subnet IP VIRTUAL local area network for the two IP ranges? I have to remove the assignenment VLAN per port and are based entirely on the treatment of subnet IP VLAN?

  If there is a better RTFM on this topic you can tell me I would appreciate it

  Thank you!

  I ended up calling specialists... great Dell technical support here.

  In fact, the IP based VLAN works very close to what I want to achieve. Missing from the user guide is that the port needs to be in the mode. Ports using switch port mode and bound to a VLAN just didn't work... probably because the vlan IP based did not differ from the port binding. Dell support has suggested to use the trunk mode, but my answer is finished using the general mode; any traffic not referenced, PVID located my usual LAN vlan ID and acceptance of port traffic of new vlan based on IP. In this way, I'm able to have a physical host DHCP on the corporate LAN and a virtual machine on that host to bind to a different subnet which is then isolated in the new NAV based on IP.

• Several VLANs with multiple gateways

  Hello.

  Got a SF500 in Layer 3 mode, 5 VLANS air conditioned and have their own subnet.

  VLAN 10 = 192.168.10.0/24

  VLAN 100 = 192.168.100.0/24

  VLAN 200 = 192.168.200.0/24

  VLAN 201 = 192.168.201.0/24

  VLAN 202 = 192.168.202.0/24

  We have a gateway on Vlan 10 (192.168.10.1), which all VLANS can see & access (because of intervlan routing), and this currently allows for vlan 10 for access to the internet.

  I want to vlan 100 to be able to access the internet through this gateway, although other VLAN (200,201,202), uses a different gateway located on the vlan 200 subnet.

  Of course, the gateway must be in the subnet.  I can't assign the default gateway of a machine on vlan 100, the gateway ip address on vlan 10.

  If I point the virtual interface default gateway in its subnet (for example, 192.168.100.254), he also does not know how to get to the internet, even if she can see the entry door (I can access a web page it hosts).

  So the question is this:

  Traffic 100 VLANs can be routed on the SF500 to use the gateway on the vlan 10? (outside the default gateway of the switch).

  If this is not possible with the SF500, what do I need to make it work?

  Thank you very much.

  Hi André,.

  I understand what you want to achieve, so in your case, we need a switch with PBR (policy based routing) capacity that allow to match the IP source address and action hope then the IP address of the gateway.

  This feature is not implemented in SMB product, but for devices of the company, we have this feature as Catalyst 3750

  Please note or marked as replied to help other customers of Cisco

  Greetings

  Mehdi

• How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

  Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

  I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

  The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

  ... BillH

  Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

  If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

  -KjB

  VMware vExpert 2009

• ip WLAN configuration - missing option to set the gateway and proxy...?

  Hello!

  I need to put the default gateway and the ip proxy addresses after you connect to an access point with wpa2.

  For example my htc incredible may do very well in the installation behind wifi opions.

  I think that he whould do a good idea to config for gateway, dns and proxy server server ip config wlan just after ssid-choosing the Tablet I remember 4 the next connection... a bit like the login made 4 me.

  Could sb here please give me a hint how to solve my problem of connection up there?

  I really like the A1 ThinkPad Tablet after using it 4 about 10 days now... 4 I can fully recommend the purchase and improve my gadget favorite... :-)

  (mod edit: changed the title of the post to match the wire because the question is about the thinkpad rather than the A1 ideapad Tablet Tablet)

  Under settings to go wireless and networks

  under Wi - Fi networks

  Press and hold the connection that you want to change

  Select 'change network '.

  Scroll profile

  Change the automatic to manual Proxy settings

  Enter your settings

  In this place you can also change your DHCP server static IP address

• DHCP on 62xx and switches 28xx

  I'm putting up a VoIP system and fight with the network config. I have a mixed environment of 62xx series and 28xx series switches. I created a VLAN for voice and uses the default VLAN for data. VLAN routing on the l3 switch works fine. I can ping between subnets without any problem.

  Working with intellectual property, as the IP phones will get an address on the subnet of data, then restart and vlan tag allows to obtain the IP address of the subnet of the voice of any port on any switch. But if I put the pvid on any port to the vlan voices, machines Windows still get DHCP on the vlan, but IP phones will not, they will receive only an address so firstly through the subnet data. My voice switches also lose communication entirely, when statically defined with an address of subnet voice and connected to a port with pvid voice vlan.

  Through the subnet of data to get an address is no big deal, but being not not able to put my voice switches on the subnet of voice is a problem. I will freely admit that I know just sort of what I do. Any help or advice would be greatly appreciated.

  Hello

  Here is the recommended method to configure the data and phone. http://www.Dell.com/downloads/global/products/PWCNT/en/pwcnt_voice_VLAN_support.PDF

  Data is found in the VLAN no marked native and the voice in a VLAN tagged.

• Restricted Inter-VLAN with SG200-26 and SG300-10 routing

  Hi all

  My apologies if this has been covered elsewhere.

  My organization would like to organize a LAN game activity. The installation program I have in mind involves a switch 24 ports to connect all computers in player and saw that the switch connected to a smaller 'core' which has the connected the router and game server. I would like to know if I can put things up as follows...

  SG200-26 with 1 to 24 ports on VLANS separated so they can talk to eachother. I'd then ports 25 and 26 to be a trunk aggregated (for bandwidth and redundancy) port to carry all 24 VLAN more an additional management VLAN (VLAN 100 e.g.) that will be used to access the switch. I want these aggregated trunk ports to connect to a 'core' SG300-10 switch that is connected to the game server and a router for internet access.

  I would like to than the possibility of having two network connections of the server to the switch, one on the management of VLANS and the other on a VLAN different (e.g. 50 VLAN) which will be accessible by players (ports 1-24 of SG200-26). The power switch needs to be able to perform routing inter - VLAN restricted, because it does not VLAN 1-24 of eachother talk but they can talk to VLAN server, but only through specific service ports (e.g. 12345, 12346 port). Is this possible?

  Also how I configure the SG300-10 to enable the VLAN 1-24 of VLAN 50, but not to talk or VLAN 100. So, I will probably have the router on its own LAN VIRTUAL (VLAN 60 ex.) and allow for VLAN 1-24 for access, but only via HTTP port 80 for web access.

  What do you think?

  Thank you.

  Hi Marc, the default gateway of the computers will be the SVI to the switch.

  Router-> couche3-> SG300 layer 2 SG300

  router is 192.168.1.1

  VLAN 1 in 300 SG is 192.168.1.100

  2 VLAN on 300 SG is 192.168.2.1

  SG300 layer 2 has a 1u, 2 t trunk.

  My computer to connect to an access port 2 unidentified on the layer 2 SG300.

  I am able to ping 192.168.2.1

  I am able to ping 192.168.1.100

  I can not 192.168.1.1 pnig

  The reason is that the router has no idea on this subnet so cannot send the package to the source 192.168.2.x subnet.

  The ACL and the basic connection are 2 different animals. The ACL is to prevent intervlan communication. The basic connection must be tags trunk and vlan or static routes.

  -Tom
  Please mark replied messages useful

• PowerConnect 6224 VLAN config / default gateway

  Hello

  I am new to configuring a VLAN and work with DELL going on so please forgive my ignorance.

  I joined a small agency that currently has a flat structure networking including 1 6224 linked to two 5548 one is connected to three 3548 (access), and the other is connected to a server. The 6224 connects to a proxy (default gateway), and then on the Web. All devices are currently on a 192.168.78.0 24 network with ip default gateway 192.168.80.1

  We want to segment the network using two VLAN initially. VLAN 1 user "80" and vlan 1 safety '70' and I want to clarify a few things before that I try:

  1. can you stay the ip on the network switch for vlan user ex: 192.168.80.123 or should I create a vlan separate management?

  2. I know in order for the inter - vlan, the ip of the gateway routing vlan must be on the 6224 and I then have to configure a default route to the proxy. The proxy must be on one VLAN separate or could I leave on VLAN 80 and change the ip address another que.1?

  Thanks in advance.

  I did it several times myself.  You can do almost an infinite number of ways, but it will be better to stick to certain typical networking practices.  Here is the version digest readers of what would be preferable to do so.

  1 enable routing on the switch stack.

  2. make a 80 VLAN for your network 24.80.  Assign the IP 192.168.80.1 to this VLAN.  In this way, customers will now be a ".". 1' default to the network gateway, they are on.

  3 make an another VLAN 70 for your network 24.70.  Assign the IP 192.168.70.1 to this VLAN.  This will be the default gateway for the network.  Repeat for however many VLANS / networks you want to.

  4. create a separate VLAN for his own 'bubble' network between the switch and the upstream proxy server.  (Lets call him a dummy VLAN 100 with an IP range x.x.100.x 29.  It can be just a little/29 block or something or 24 if this is confusing. Configuring the ports a few ports 'access' for this VLAN for that no marked traffic pass over this network.  Set x.x.100.1 to your Proxy Server and x.x.100.2 to your switch, then make sure you have directions on both sides about where traffic should go.

  5. save your configuration so that you have to rebuild it after a reboot.  :-)

  It will be best to set your expecations about it.  You want realistic during a weekend/maintenance window.  ARP cache and other issues can make for some downtime.  In addition, there are certainly other ways to do it, but that may be hurtful on the road when you need to increase or scale.  Two years on the road someone wondered why a default gateway is on a few eccentric IP, or there are errors of routing intermentent, etc..

  Powerconnect worldwide, just be clear what is the difference between a port of "access" to the port of 'general', and are a port 'trunk '.  Conditions may be different from the Lim to make, and if one comes to tell the world of Cisco, this may be a little different.

  Finally, don't forget to come up with a good procedure for this during your maintenance window.  Come up with a good plan documented and so well thought out, when run you it, it will be nothing more than a task in office project.

• Windows 7 full screen games and desktop applications losing focus and stealing discussion questions

  NOTE: The updates at the top of this announcement, the original message is less than.

  UPDATES: here are a few updates and new information that I have gained since the original publication.

  Registry settings

  After doing a lot of reading, I found some registry settings that appear to solve some of the problems I see. All three were found in HKEY_CURRENT_USER-> Panel-> Desktop

  ForegroundLockTimeout: Has been reset for some reason any. I removed the key and restarted, but he is back to zero. This is why I looked at the default value of 200000 (decimal) and set it. After that, he stayed. \

  I saw two other keys HungAppTimeout, WaitToKillServiceTimeout, and WaitToKillAppTimeout and all have been set to zero. I deleted these registered.

  I have no idea what set these registry keys to zero, but after being put into default, I can now click on an application full screen reduced, and he returned immediately. I can still lose focus in full screen or desktop app, but not as often as before and now he is usually just badly behaved apps stealing focus rather than seemingly random events.

  I wonder if there is a patch that has changed these values, or a settings option that does. From what I read, they are sometimes twisted to allow faster restart and stop servers.  I don't have a software that would be while and manually set their and none have the people I know. One of them has confirmed that their box also has these set values zero and has no idea why.

  I hope this information is useful to other people with odd focus problems.

  ORIGINAL POST FOLLOWS *.

  I have a problem in Windows 7, which at first I thought a number of different problems, but I am more convinced that they are all connected.

  All of them started to happen around the same time - late January or February after a Windows Update - and largely the same or very similar issues affect 3 of my friends and co-workers running Vista and 7. Unfortunately my notes on the update happened while the time are missing, but all 4 of us have seen questions start at the beginning of the year in the January/February calendar, which makes it seem like they should be linked.

  NOTE: There were a few minor problems before even with the update, but nothing like what happened in early 2011. I had problems to update with Vista and 7 alone, but they were rare and sometimes fixable with registry hacks or it was an offending program, something did not like Aero, etc..  The questions below got a lot worse in early 2011 so they appear together in this post.

  I will describe each problem separately and the affected BONE and the symptoms, and I hope that some can make sense and help me solve the problem. Major problems first, then a few small problems and measures that I took to the to check follow after. Sorry for the long post, but it's a maddening problem affecting many people, and I want to be as complete as possible.

  Games not switching and the apps full screen #1: if I'm in a game fullscreen and I go to the office, it is very difficult to go back. If I click on the taskbar icon, nothing happens. I have to click on it repeatedly, often a dozen times or more before the application full screen or game is restored. It is most often with the games. Full screen I don't want not maximized, I mean where a program takes the entire screen. Games is easier to reproduce so far have all I currently use the question and variances in how it is difficult to come back in full screen are not significant between them.

  Apps full screen #2 focus lost: this happens especially to my friend running Vista, when you play the game full screen. She will play something like the Lord of the Rings Online and she loses the keyboard focus and the mouse, but the game is always full screen. Usually the only way that she can solve the problem is to use CTRL-ALT-DEL to bring up the Task Manager, which for some reason solves the problem and she can return to the game for a little while that. I run Windows 7 with another couple of friends and we can also see this question, it is much less common. Changing an old mouse seems correct for Vista for some reason any. 7 that it happens rarely, if hard to duplicate to see if changing the mouse would help. In any case, will and against a beautiful new mouse laser mouse is usually a horrible option.

  Office applications #3 lose focus: it affects two of us under Vista and 7. We will be typing in chat, email, anything... and the foreground app will lose focus. What catches there that is impossible to determine. In my case, I can occasionally see a taskbar popup button and then disappear immediately, but I have never been able to track it down. Running in safe mode or boot seems to have no effect on this, or disable all services, extension and program but by default Microsoft in Windows 7 and Vista. Its almost like a Microsoft program is to do. Also, even though I mentioned the taskbar icon appears briefly from time to time, which cannot be bound: it does not always coincide with the loss of focus and is not always present when the focus is lost.

  #4 desktop applications lose keyboard focus and the mouse: it's like the number #2 above, but happens at the level of the office. Unlike the #3 that the window does not lose focus, it is always in the foreground, but keyboard and mouse stop working. It is usually impossible to move to another window. Just like #2, the solution that we have so far is to use CTRL-ALT-DEL to switch to the Task Manager, which temporarily solves the problem. ALT-tab through windows does not work.

  Here are other minor problems that may or may be linked, because they seemed too much to start with.

  Switching away applications full screen takes more time: Windows 7 on my machine, switching off games full screen takes more time than he did in the past. It was a minor issue in autumn 2010 and became much worse early 2011.

  Some windows lost focus while being re-size: if I take the corner of some windows for re - size, sometimes the re-size operation stops until I release the mouse button, as if he has lost the focus. Color of the window indicates usually focus however is still there, and grabbing the corner once again we will move me a little more. It may take several tries to get the window size as I want, as the re-size operation closes several times before I release the mouse button. This affects only 2 of the 4 people I talk so much that I can tell from our conversations and shared between Vista and 7. Both of us have Logitech mouse it might even be a driver problem, but using a mouse cheap test has not fixed the problem with me.

  Firefox: Firefox repeatedly will "dim", where Aero makes the window lose color to indicate that the application is not responding. It didn't happen before January 2011 for any version of Firefox.

  Concrete results to track down the problem:

  I ran programs like WhatHang and others who are trying to catch the programs that are suspended, stealing focus, etc.. Hours of testing found no results except that Firefox crashes frequently. Disable Firefox doesn't solve all the issues however, so I guess that its not related.

  I tried booting safe and clean, and they have had no effect. Secure boot is rather useless since I can not usually run programs that show the problem more easily. I also tried turning off everything except what comes with Windows 7, and it had no significant effect.

  I tried to use a different mouse. While it helped a bit with one of my friends, it only helped me so far. Different mouse drivers do not seem to help either. I also tried various nVidia without significant information acquired or corrective drivers.

  I also ran through various other ideas here as the race of the file system scanner and so on and not found any problems with my system, and where I could help my friends do and they also found nothing of note with maintenance and verification tools.

  My friends and co-workers: most of them are not local to me, so my focus of their issue has been rather limited. The main thing that we all have in common is that we had some minor problems in the past, as in 2010, and they've all got a lot worse in early 2011. Unfortunately none of us kept of records accurate enough to indicate any special updates that might have caused it.

  In any case, I apologize for the log message, but this issue emphasis is maddening. Its become a frustration serious then I thought to post information on the problems which seem related would be the more useful approach.

  I am a graduate of comp-sci systems and a companion systems programmer, and I have tried everything I can think of to debug and isolate problems, symptoms, etc. and had no chance. My friends are usually illiterate computer so that they are even more perplexed and frustrated by this problem. In my reading the forums, I see a lot of Windows Vista and 7 discussion questions, but rarely a lot of details, and when a problem is identified, it this far does not apply to me or my friends.

  I am happy to provide any other details I can.

  Updates:

  I forgot to mention that I have a Setup dual monitor. Aero seems unhappy with it, a lot of flicker when switching to full screen in games and other applications. I guess its because a single display off Aero while the other has it we or maybe not accelerated. Remove the second screen does not solve the problems I see, but I mention it in the interest of further development.

  I want to just chime in that I see similar (but not exactly the same) behavior and time seems to match as well. Among the updates must have messed something up. I forgot my Cardinal never update rule anything :/

  In any case, I have a few specific questions all problems related to full screen/window/input. When you play the Witcher, when you look at, if the mouse touches the edge of the screen, it stops, thus giving a very narrow range of angles I can watch from. Baldurs gate, as soon as I hit any key, I can't click on anything whether (and what I typed does not appear). Looking for police 3 (dosbox) it works fine until I hit a key, and then the mouse bounces oddly around the screen. If I alt - tab, in these 2 cases to last and go back, the problem is solved until I have a button again. In the case of the Witcher, if I alt tab and click the icon to the taskbar, it seems this problem, until I have a press.

  And I'm sure I had none of these problems a few months ago. I have tried everything I can think :( I tried the registry settings, but they do not seem to help.

  Edit: Oh, almost forgot. Whenever I click on full screen on an online video, like youtube, it appears in the background behind other windows, and then I have to click on it in the background to bring it forward. Very weird. Not sure if it's related. I'll try to change my video drivers... So boring when everything was working fine a few months ago.

  Edit 2: Do not take into account my post, I had a program called synergy race (usually use a mouse on multiple computers at the same time). Apparently, he was the problem.

• I forgot my email of rescue and my security questions

  I want to change my apple id passwoed by the way I forgot my email of rescue and my security questions and I can not change pls help me

  Greetings and salutations, jonach!

  Welcome to the communities of Apple Support! Regularly, I change my password Apple ID as well so I understand your dilemma! I'll be more than happy to help with this.

  If you forgot your Apple ID security questions answered - site Apple ID has been redeveloped by making it easier to do what you need from your computer. Just follow the information provided in this article.

  Have a great day!

• Satellite L500D - SSD and RAM upgrade question

  Hello

  Who are you? Ttime for some great upgades for this laptop and some few questions and I'll be happy to answer for me.

  1. is there an empty space to install a second hard drive SSD?

  2. If there is not can put off the hard drive DVD and in the empty space to fit an SSD? I need something like that? ---> fb4d http://cgi.ebay.com/CF-Card-2-5-Serial-ATA-SATA-SSD-HDD-UDMA-Adapter-/190537923405?pt=LH_DefaultDomain_0&hash=item2c5cf1
  This is an adapter.

  3. the quantity of RAM max supported Satellite L500D? I installed 2GB and I have an extra plug and I want to install a single 4 GB RAM and 6 GB RAM total

  Its sounds good to you this idea? I thank you and have a nice day

  Hey,.

  As you can see on the underside of the laptop doesn t supports a second HDD because there is no second Bay HARD drive on the underside.
  The map you posted is unofficial so no one can say whether it compatible s part or not. For laptops Satellite AFAIK there is no CD/DVD Bay adapter, but you can ask a provider of service authorized for more details.

  The maximum RAM capacity depends on your phone model correct. L500D was delivered with different hardware, so you must post your exact model laptop number.

• I forgot MY E-MAIL of RESCUE and my SECURITY QUESTIONS.

  I bought a gift card of $15 iTunes buying an app on the App Store, but he asked me to meet my security questions. I thought I knew them, but they were wrong. I ended up trying that so many times he ended up blocking of my account. He asked me to try later or use my email to rescue more. I press 'Use rescue Email Address', but is to be insensitive. I went on my id to iCloud pressed apple to phone then security security and passwords and press on question said that my email has been sent with half of my email does not appear I enrolled in my gmail, but had no email to unlock my account I tried everything can do this?

  PS I am also certain that it is the correct address, and if by a chance, I put the email address wring as rescue me how can I change?

  Unless it is in a spam filter, you have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (138471)

• RAM and GPU update questions about the Satellite A60 652

  Hello

  I have a question about my Satellite A60-62. I want to upgrade the RAM, but I do not know what kind of chip that I have to do and how that insert into the laptop.
  I also want to get a new card to my video graphics, I currently have "Radeon Mobility IGP 7000', is this possible, and the same questions again, what card do I need and how to I insert in the laptop..?

  Thanks for any help.

  Hello

  The works of A60 with PC2100 and PC2700 memory.
  The maximum is 1536 MB.
  Toshiba part numbers are:
  PC2700 256 MB PA3311U - 1 M 25
  PC2700 512 MB PA3312U - 1 M 51
  1024MO PC2700 PA3313U-1M1G

  The graphics card cannot normally be improved.

  Good bye

• CameraWindow, Image Gateway and travel

  I have one new PowerShot SX60. I've implemented CameraWindow and can easily view the photos from the camera on my smartphone. When I WifFi, I can also upload them to Canon Image Gateway. We leave for the Viet Nam in a few weeks, and I was wondering how to use these snazzy features to publish photos on Facebook or attach them to e-mail on a trip. While we are abroad, I don't want to spend too much bother time with technical details, so I hope to have a good method under control before leave us. Put pressure on travelers from the world out there with advice about how to get the most out of these features in situations where the available WiFi can only be a cybercafe or hotel? Is it possible to bypass Image Gateway and go directly from the phone to Google Drive? How about you, attach one image in an e-mail or a Facebook message? I'm looking for an efficient workflow to use in situations where the time and access are limited. Any advice much appreciated!

  You don't mention what smartphone you use, so my experience will rely on Canon G7X and window installed on an iPhone camera 6.

  For me - and I have not yet traveled with the combination, just around NYC - would be to use the camera app window to copy the photos you want to send (FB, Message, E-mail) on the phone itself. (In the case of an iPhone's Camera Roll or all Photos/Moments if you hired iCloud Beta of Photo I) Once the photos on your phone you can use either the FB app (sometimes I prefer the paper version), or your e-mail or any account that you used to send Messages to send photos.

  Now - although I've set up an account of the gateway of the Image, I him have not used yet. I guess the 'advantage' of that would be that your photos are stored in the cloud of Canon. The way I suggested above - especially if you don't use icloud Apple Beta Photo - pictures remain on your phone. Not the best solution for photo backup unless it's a pretty short trip. Unless you plan to import all your photos to Google Drive, but I guess they have a dedicated application and would not need the Image gateway to do.

• What is a DHCP client address and what is an ISP?

  Try to connect Tivo w / a wireless connector for my computer instead of using the phone line. TiVo's request for a DHCP client address and Pack International customer

  Hello

  The DHCP Dynamic Host Configuration Protocol () is a protocol for network configuration for hosts on networks IP (Internet Protocol). Computers that are connected to IP networks must be configured before it can communicate with other hosts. The essential information needed are an IP address and a default route and the routing prefix. DHCP eliminates the manual task by a network administrator. It offers a central database of devices that are connected to the network and eliminates duplicate resource assignments.
  An ISP (ISP) is an organization that provides access to the Internet.

  See the following link:
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry