VLD-2398: no data error file specified

Similar Questions

• Design Standard CS6 Installer Package for Windows (English and Japanese) "data error - file is broken.

  Hi all

  After donwloading CS6 Standard for Windows (7z file) to the Adobe Licencesing Web site several times, trying to extract the files using the latest 7zip also tested it with Winrar I get several error data in filename (*) file is broken. The link used is on the next page:

  https://licensing2.Adobe.com/SAP (bD1lbiZjPTAwMw==)/bc/bsp/sap/zavlesd/downloadPage.htm?sap - params = bHZfbWF0bnI9MDAwMDAwMDAwMDY1MTYzMjUxJmx2X2N1c3RvbWVyPTAwNTMwNDE4MDYmbHZfY3VzdG9tZX JfbmFtZT1NQUNMRUFZJTIwQ09MTEVHRSZsdl9wcm9kdWN0PSZsdl92ZXJzaW9uPSZsdl9wbGF0Zm9ybT0mbHZfbGFu Z3VhZ2U9Jmx2X2FwcHNlcnZlcj0mbHZfZG93bmxvYWR0eXBlPQ % 3d % 3d

  Can someone please help, tried different internet connections and browsers as both the link of download with Download Manager.

  Markus cordially.

  Hi Markus@Macleay,

  Instead of download from the license have you tried downloading from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=design_standard

  Alternatively you can try to download the available direct download links to: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  But make sure you follow the steps mentioned on the page before you start the download.

• VLD-2398

  Hello
  I imported my flat files (sources) and tables (targets) in owb.
  I got an error
  VLD-2398 No. data file specified.
  generated code will use sampled file name and location of the file 'SOURCE_FILES_DECADE_LOCATION1 '.
  
  
  Thanks in advance

  Hello

  VLD-2398 indicates a data source file has not been configured in the plan.
  1. in the properties of configuration of mapping (mapping in the navigation tree and select Configure right-click), add a Data Source file (click the box with the three points, type a name, and click Add).
  2 expand the name, and then select the data file, bad file, throw files and the control file locations and names.

  See you soon
  David

• [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hi, I'm new developer on the Blackberry platform.

  I make the first application, but there is a problem when I wanted to install in the Simulator.

  My application has several screen and each take the server data, analyzing the data and displays on the screen.

  My problem is any executable thread.

  When I'm using the code below, it is fine. My application can work perfectly on a simulator.

  public TestingScreen() {
     // Runnable thread = new Runnable(){
     //   public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
     //   }
     //};
     //new Thread(run).start();
  }
  

  but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

  public TestingScreen() {
     Runnable thread = new Runnable(){
        public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
        }
     };
     new Thread(run).start();
  }
  

  I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

  I already have Google but I do not get the answer.

  Please advice. Thank you very much.

  Kind regards.

  hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

  Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

• Error message "an error the system cannot find the file specified" when you use Bitlocker

  Original title: Bitlocker to go not accessible by car usb

  Here's the short of it: I decided to use Bitlocker To Go on my USB drive, and while he was to encrypt the drive I plugged a USB DVD - RW drive (it

  s a netbook) and then I got an error message in the Bitlocker program that says "an error the system cannot find the file specified."  I closed the error message and open the Bitlocker Unlock program, put my password and press on unlock and now it only that sit there and spin and the light flashes on my Batman of Seagate HARD drive as it is accessed.  The internal data of the car do not make the same sound, as he did while he was being... just encryption sounds like there are in an infinite loop.  The disc is good and has no errors, and I scanned with SeaTools.  I have a lot of important data on this drive, and I really don't want to lose anything.  Help!

  Hello 5thgear,

  Thank you for the question!

  I'm sorry to know that have problems you with Bitlocker. I get it right you get an error message "an error the system cannot find the file specified" when you run the bitlocker encryption.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Click on the link below.

  http://blogs.technet.com/b/ASKCORE/archive/2010/08/04/issues-resulting-in-BitLocker-recovery-mode-and-their-resolution.aspx

  Answer to us if you are having problems with bitlocker or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Message error when you install a game 'Assistant instalation "_" a support of instalation file not would be installed data error (cyclic redundancy check)

  It's the exact message

  "A support of instalation file cannot be installed
  Data error (cyclic redundancy check)

  This simply means that your CD/DVD media for the installation of your game is corrupted or cannot be read, extract for all the cracks, scratches on your support.

  If it is in perfect condition, better clean the lens of your CD/DVD-Rom drive with a cleaning kit, as the lens of the drive could have been contaminated by dirt.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Data error when trying to backup files on external hard drive

  Hello. I am unable to back up files from my Dell Studio desktop on an external hard drive.  Previous backups were successful, but now I get "data error (cyclic redundancy check check 80070017).»  I checked the disk, and there is no disk problem.  I have gone through other assignments, and none seems to answer this question.

  Hi Bill1959,

  Welcome to Windows Vista answers Forums!

  Step 1: First of all try to temporarily disable the Antivirus and security software and check.

  Step 2:  Try to run a checkdisk/r to repair bad sectors by following the steps mentioned below.

  You can run a Checkdisk/r to repair problems related to bad sectors, lost clusters, reticulate files and directory of the command prompt errors in the System Recovery Options menu using the Installation of Vista disc.

  1. Insert the installation disc.

  2. restart your computer.

  3. click on the Start button, click the arrow next to the button lock and then click restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click command prompt.

  8. at the command prompt, type the following command and press ENTER

  chkdsk X: /r (drive letter)

  9. press y when you are prompted to check the drive the next time the system restarts.

  10. close all applications, and then restart the computer.

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• backup and restore gives error cannot find the file specified 0 x 80070002

  I'm trying to make a backup of the windows backup and Restore Center | I can't do what I get an error saying message cannot find the file specified 0 x 80070002. can someone give me an answer on how to fix this so I can do the same

  Thank you

  Hello

  You did changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/979281 (applies to Windows Vista)

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Audio service does not not after download of Creative, restarts, error 0 x 80070002, the system cannot find the file specified

  Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update.  It lead me to a large download of Creative for its console related sound and SW, and things worked fine.  When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop.  When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off.  The sound message indicates that the audio service is not running.  I tried to restart the computer several times, but the results were the same.  I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified.  Where should I go from here?

  Hi Jfklinger,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
  2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
  3. click on the levels tab.
  4. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  Method 2: use Control Panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. click on Start, click Control Panel, click hardware and soundand then click sound.
  2. click on the tab playback or recording .
  3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
  4. click on the levels tab.
  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
  http://support.Microsoft.com/kb/930095

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hello

  My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of

  Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well

  So what problem here? and whats solution for that?

  
  

  

  has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here

  http://supportforums.BlackBerry.com/T5/Java-development/I-O-error-cannot-run-program-quot-jar-quot-C...

• IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210. tmp\sampleapp (the system cannot find the file specified) [ERROR] CAP exception has occurred

  C:\Program search in Motion\BlackBerry 2.3.1.5 > bbwp SDK WebWorks
  C:\apps\sampleapp.zip o C:\apps\Output2
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [WARNING] Cannot find an element of
  [INFO] The application of filling source
  [INFO] Compilation of application BlackBerry WebWorks
  IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210
  . tmp\sampleapp (the system cannot find the file specified)
  [ERROR] CAP exception has occurred

   

   

   

  How do I solve this problem

  The tools are not compatible with JDK7. You need to install JDK6 and it must be the 32-bit version.

  If you have several versions of the JDK, you can modify bbwp.properties in the subfolder bin of your SDK WebWorks to include the following text:

  C:\Program Files (x86)\Java\jdk1.6.0_31

   

  
  You would update the JDK version to match your own, but note that this is the SEO Program Files (x 86); the path 32-bit installations. This way you can have several JDK if you need, but the command bbwp must reference the appropriate JDK.

  In short, he must be JDK6 and it must be 32-bit.

• I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Why is the error, how to fix?

  File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin