Why receive iMessages on my other iPhone? Two iPhones, Apple ID, one number.
The installation program:
Two iPhones (6s + and 5), an Apple, a phone number ID. I use the same Apple ID on both phones. Both phones have parallel sim cards using the same number. Both phones run on iOS 9.3 and 9.3.1 late first.
The problem:
When someone sends me an iMessage on my phone number, the message is received in one phone, but not the other. If I saw right to the problem, the iPhones of the receiver is always the one where I finally activated iMessages (in the settings).
What works:
When someone sends an iMessage to my email (iMessage), iMessage is received in both phones. When someone sends a text message SMS on my phone number, it is received in both phones. When someone calls me on my phone number, the carillon of both phones and I can answer on either.
What I tried:
Made sure that two iPhones were activated in [Settings]-> [message]-> phone number [send / receive]. IMessage is switched off and back on. Restart the iPhone. Signing and to iCloud. Reset the network settings. Hard reset the iPhone. All this on two iPhones many times and in different orders. All no Apple support told me of for iPhones for a 51 minute call. Another pair of iPhones (4 and 5) running iOS 9.3.1. Nothing did.
Questions:
Is someone using a similar setup? Have you had the same problem? You resolved it somehow?
PS:
I am well aware that the problem might be circumvented by changing the configuration (for example using separate Apple ID or separate numbers).
But I'm only interested in solutions to this real configuration (two iPhones, Apple ID, one number). If you have to run on any version of the iOS, please let me know.
Do you think your iPhone in the service to the front (on the latest iPhone). If you do, try the forward (as if your first iPhone was an iPad or an iMac without SIM card). Let me know if it works, but it should. I to iPhones, and I get my texts on two of them two numbers with transfer of text messages (in the iMessage settings).
Tags: iPhone
Similar Questions
-
Why my iMessages turn into SMS
Why my iMessages turn into SMS
Hi Rugman304,
Thank you for your question in Apple Support communities. I use my iPhone all the time and are based on the ability to send an iMessages. I will be happy to provide you with some information for you on this issue.
The first thing I recommend is to restart your iPhone. A simple restart is very beneficial for the performance of the iPhone. Then, you do not want to follow the steps described in this article:
If you can't send or receive messages on your iPhone, iPad or iPod touch
Have a great weekend!
-
Why my iMessages are showing on my camera of husband? It has its own Apple ID?
Why my iMessages are appearing on my husband's phone? It has its own Apple ID.
Ano also its (incoming and outgoing) calls on iPhone 6Plus S show on his iPhone 6s.
Thank you
Apparently, both phones have been implemented with the same iCloud account.
-
Hello.
When my Apple Watch is off my wrist I put it in another room. I keep my I phone with me by my side. When I get a
text the watch appears to do a ping in the next room, but no sound notification on my phone which is next to me.
How can I have to watch not pick up text messages all in wide wrist and the phone have allow them with sound notifications
Thank you
Hello
You may want to try these settings for your watch:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.
-On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).
-Also on the password settings screen, select Unlock with iPhone.
After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone. Your watch then will stay unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.
How notifications behave then will depend on the State of your devices. In order to provide notifications to your attention as soon as possible:
-If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.
-If your iPhone is locked or mode and your watch is unlocked (regardless of the question of whether the screen saver is awake or asleep) and on your wrist, you will receive notifications on your watch.
-If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.
More information:
About notifications on your Apple Watch - Apple Support
To receive sound alerts on your iPhone, check the following:
-On your iPhone, go to: settings > Notifications > Messages > sounds > verify that an alert tone is activated (also activates other options);
-Use the volume buttons on the side of your iPhone to adjust the volume of the ringer.
-By viewing your home on your iPhone screen, slide upward from the bottom of your screen to open the control center > check that do not disturb (Moon icon) is not enabled.
-
iMessage syncs with the iPhone
iMessage to sync between my iPhone and a MacBook Pro, but is no longer do. I followed the "fixes" proposed in different threads here and elsewhere. Here is some information on my devices:
MacBook Pro running v - 10.11.2 El Capitan
iPhone 5 v - 9.2
On my Mac, when I open iMessage, contacts each have the word "Offline" under their names. Contact selected in the field 'To' his name in a red background, and whenever I try to send a message, I get a "Not submitted" notification When I open iMessage preferences > accounts - there are two accounts listed: my iCloud / account iMessage Apple and Hello. Both are 'greyed out' and is not accessible when I click on them. My iCloud / Apple iMessage account says "(inactive).
In system preferences > iCloud - I am connected to iCloud
I followed exactly the steps of the sequence suggested by the two GregCAust and brenden dv to this thread of transmission of text Message confirm code will not be displayed in Mac without success. I repeated the steps proposed in each several times.
On my iPhone, when I go to settings > Messages - disable iMessage then turn it back on, once it activates and presents the "Text Message Forwarding" option, after you click on the button Activate, I get the message "Text Message Forwarding" where do I enter the code that appears on my Mac but code never appears on my Mac.
However, when I activate iMessage on my iPhone, I get the following message on my Mac: "your Apple ID and phone number are now used on a new iPhone iMessage. . If you recently signed in "iPhone" you can ignore this notification. "After you click OK in this message, and then trying to activate forwarding Message text again, I still don't no notification of a code displayed on my Mac. When I try to send another message in iMessage on my Mac, I always get an undelivered notification and SMS message bubble is green.
I hope someone can help. Thank you
Messages - Difficulty of synchronization between Mac and IOS
Messages - Difficulty of synchronization between Mac and IOS (2)
-
Number of the caller appears on my other iphone too
Number of the caller appears on my other iphone too, any suggestions?
Yes.
Do not use the same Apple ID on more than an iPhone. Each must be treated as if another person is the owner.
-
Why can I not see my Iphone s 6 with 10 windows Explorer folders?
Why can I not see my Iphone s 6 with 10 windows Explorer folders?
Because iOS is not designed with a system of open files.
-
Quick turn on the radio connection during transfer or receive a file from other devices
Original title: BlueTooth menu
Original title: I just wanted to ask
Mr President.
Hello I have a problem with my bluetooth menu, I can not transafer or receive a file from some other device, when I try to transfer a file it says the radio connection is on. I tried to find it here, but I can't find. hope you can help me. Thank you.Hello Maisa Osim.
Thank you for the question!
It is disheartening to know that have problems you with the Bluetooth Menu. As I understand well you can't transfer or receive a file with other devices, and get a prompt to activate the radio connection.
1. what operating system is installed on the computer?
2. were there any changes (hardware or software) to the computer before the show?
3. What is the exact error message associated with a radio connection?
Click on the link below.
Add a Bluetooth device or other wireless or network device: frequently asked questions
Answer to us if you have problems with the Bluetooth device or any Windows problem, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection? owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED
Hello
Thanks for asking!
This is because the network discovery is turned on.
If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.
Enable or disable network discovery
http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery
Reply back with the results. I'd be happy to help you further.
-
Get 'error 5' try to (re) install Lightroom 5 - I noticed that this issue will receive no response from others who have already contacted Adobe (is there no solution?) - Windows 7
The first: try the solution here: setting up error 5
The second: when your license is not active for this installation. Make sure that you are connected to the account where you have your active subscription. Log out and return to: https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
In any case, I would try to get rid of the first message in the first place.
-
When I use the left arrow FF tends to go back two screens instead of one.
Sometimes when I create a new tab it opens two instead of one.
Also when I close a tab (Web page or e-mail) FF and TB sometimes both minimize
When I opened a project in Tbird, if I close it, the set of Tbird farm.
When I create a copy of the project and save to drafts, when I recover, there many other added characters generally upper and lower case or some other character.
Both applications are up to date.versions 38.0.5 & 31.7.0
Help!Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can also try another mouse in case there is a problem with your current mouse and check the double-click setting in the mouse driver software.
-
I can't remove this for my iPhone apple ID * is attach to my iPhone, second question when I text to this number *, returned to my number, how can offer to this number... Thant you if you can solve my problems.
I have no idea what you're talking about. Perhaps you can rephrase with the correct spelling and actual phrases that include capital letters and periods, and other grammatical subtleties.
-
I can diasble my iphone stolen by serial number?
I can diasble my iphone stolen by serial number?
No, you can't.
What to do if your iDevice is lost or stolen
iPhone, iPod Touch and iPad
If enable you find my phone before it was lost or stolen, you can follow only if it is connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. You can't wait for Apple or anyone else to find your device for you. You can't recover your loss unless you make your device for the loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:
This link, Re: help! I misplaced / lost my iPhone 5 today morning at delta Chelsea hotel downtown one I am not able to follow. Please help!, has some good advice about your options when your iDevice is lost or stolen.
1. declaration of a lost or stolen Apple product
3. AT & t. Sprint and Verizon can block phones stolen/tablets
4. What-To-Do-When-Iphone-Is-Stolen
6. what to do if your iOS device is lost or stolen
7 6 ways to track and recover your lost/stolen iPhone
9 report Stolen iPad | Stolen lost found online
It pays to be proactive in following the advice on the use of find my phone before you lose your device:
2 set up your iDevice oniCloud
3. OS X Lion/Mountain Lion - in regard to my Mac
4 the free configuration find your iPhone (even on unsupporteddevices)
-
Need to align the two radio buttons in one line
Hi all
In my BlackBerry Application, I have a part of the user interface where I need to align two radio buttons in one line.
I used the code to design the user interface, but the two radio buttons below are overlapping.
SerializableAttribute public class BBSettingsScreen extends form {}
Rbg RadioButtonGroup = new RadioButtonGroup();
RadioButtonLayout raButtonLayout = new RadioButtonLayout();
raButtonLayout.add (new RadioButtonField ("ONE", rbg, true, RadioButtonField.FIELD_RIGHT));
raButtonLayout.add (new RadioButtonField ("TWO", rbg, false, RadioButtonField.FIELD_LEFT));Add (raButtonLayout);
SerializableAttribute public class RadioButtonLayout extends Manager {}
public RadioButtonLayout() {}
Super(Manager.VERTICAL_SCROLL |) Manager.RIGHTMOST);
}protected void sublayout (int width, int height) {}
Field field;
get the total number of areas falling under this Manager of
int numberOfFields = getFieldCount();
int x = 0;
int y = 0;
for (int i = 0; i)< numberoffields;i++)="">
field = getField (i); get the field
setPositionChild(field,x,y); set the position of the fieldlayoutChild (field, width, height); Spread the field
x += 30;
}width = 70;
height = 20;setExtent (width, height);
}}
}
Please help on this...
Thank you & best regards
Chintada Ravikumar
Try this:
RadioButtonGroup rgb=new RadioButtonGroup(); HorizontalFieldManager hr1=new HorizontalFieldManager(FIELD_HCENTER); RadioButtonField radioOne=new RadioButtonField(" RadioOne",rgb,true) { protected void layout(int width, int height) { super.layout(75,30);//Width and height according to the button name; setExtent(75,30);//width and height according to the button name; } }; hr1.add(radioOne); RadioButtonField radioTwo=new RadioButtonField(" RadioTwo",rgb,false) { protected void layout(int width, int height) { super.layout(75,30);//Width and height according to the button name; setExtent(75,30);//Width and height according to the button name; } }; radioTwo.setPadding(0, 0, 0, 20); hr1.add(other); add(hr1);
-
I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.
Could you please include screenshots of the so-called issue?
Maybe you are looking for
-
P211ne Pavilion: pavilion p211ne drivers
I want drivers for Pavilion 15-p211ne my operation system windows 8.1 x64bit
-
Sorensen XEL power is compatible with labview
What Sorensen XEL power compatible with labview? I'm in the automotive field of vehicle dashboard. I want to test and simulate different transient conditions that may generate noise in the pipe I needed of a programmable power supply. Currently I hav
-
How can I change my toolbar view of the bottom of my screen on the left side of my screen?
My computer screen is destroyed. I don't see anything on the right side of my screen. I want to change the taskbar so that it shows on the left side instead of the bottom of my screen. I tried to do it myself for the last hour or two, but have not be
-
Great service has worked for the first week or two and then one day I lost all data transfers and I'm unable to access e-mail. And texting work very well. I checked with the carrier and they claim data is very well at their end and started walking a
-
Network connections not adapters appears.
I go into the network connections Panel and I get a blank screen, as if no adapter was installed. I can connect to the internet, both wireless and Ethernet connections, my Device Manager shows the cards installed and says he has no problem with them,