VM and ROW limits in ESX 3.5?

Similar Questions

• can I write in a clay column and row in excel?

  Hello!!!

  Well, is - can anyone help me and tell me, if I can write something of labview in a clay column and row in excel?

  excellent couerse in a clay column and row to an existing file...

  CAN SOMEONE HELP ME OR SAY SOMETHING PLEASE?

  Ago, as Sophia said, you can do this using ActiveX, but that requires a lot of programming

  but you can learn a lot

• How to save the table column and row headings

  I have a table where I activated the column and row headings.  Once the table is loaded with data, I would like to save the contents of the table, including the column and row headings in a text file.  The crux of "value" property returns only the content of the table, not the row and column headers.  I could use "header line chains []" and '[] column header chains' property nodes as well, but I'm in the island there is an easier way.  Looks like adding the headers of lines would be difficult.  Any ideas?

  Thanks in advance.

  Here is a way. The construction with the empty constant is to provide to the left corner of the table where there is no data.

  

• Database limits (Doc ID 336186.1) > process and execution limits

  Hi Experts,

  I have an inquiry regarding this topic because in Oracle Database 11g Documentation

  http://docs.Oracle.com/CD/E11882_01/server.112/e40402/limits004.htm

  Limitations of the databases > process and DURATION limits > there is a new parameter

  Services

  Maximum per instance

  115

  Can you help me find detailed information at this issue and where I can find this setting in the database? This information is located in a table or dictionary?

  All the information are welcome.

  Kind regards

  The doc you quote is fake, the limit of a database 11.2.x is not 115 but 150. See here:

  orcla >

  orcla > select * from version $ v where rownum = 1;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  orcla > select count (*) in the dba_services;

  COUNT (*)

  ----------

  4

  orcla > declare sname varchar2 (10);

  2 start

  3 because I in 1,200 in loop

  4 sname: = the of ' | TO_CHAR (i);

  5 dbms_service.create_service(sname,sname);

  6 end of loop;

  7 end;

  8.

  declare sname varchar2 (10);

  *

  ERROR on line 1:

  ORA-44310: exceeded maximum number of services

  ORA-06512: at "SYS." DBMS_SERVICE', line 464

  ORA-06512: at "SYS." DBMS_SERVICE', line 229

  ORA-06512: at line 5

  orcla > select count (*) in the dba_services;

  COUNT (*)

  ----------

  150

  orcla >

  --

  John Watson

  Oracle Certified Master s/n

• How to add an additional note between < ROWSET > and < ROW >

  Hi all

  Is there a way to add an additional NŒUD between < ROWSET > and < ROW > which appears ONCE per each XML document?

  <? XML version = "1.0"? >

  rowset <>

  < ROW >

  < > 7369 EMPNO < / EMPNO >

  SMITH < ENAME > < / ENAME >

  CLERK of < JOB > < / JOB >

  < MGR > 7902 < / MGR >

  < HIREDATE > 17 December 80 < / HIREDATE >

  < > 800 SAL < / SAL >

  < DEPTNO > 20 < / DEPTNO >

  < / ROW >

  < ROW >

  < > 7499 EMPNO < / EMPNO >

  ALLEN < ENAME > < / ENAME >

  SELLER of < JOB > < / JOB >

  < MGR > 7698 < / MGR >

  < HIREDATE > 20 February 81 < / HIREDATE >

  < SAL > 1600 < / SAL >

  < Order > 300 < / COMM >

  < DEPTNO > 30 < / DEPTNO >

  < / ROW >

  ...

  < / LINES >

  Will be

  <? XML version = "1.0"? >

  rowset <>

  new <>test < / test >

  < ROW >

  < > 7369 EMPNO < / EMPNO >

  SMITH < ENAME > < / ENAME >

  CLERK of < JOB > < / JOB >

  < MGR > 7902 < / MGR >

  < HIREDATE > 17 December 80 < / HIREDATE >

  < > 800 SAL < / SAL >

  < DEPTNO > 20 < / DEPTNO >

  < / ROW >

  < ROW >

  < > 7499 EMPNO < / EMPNO >

  ALLEN < ENAME > < / ENAME >

  SELLER of < JOB > < / JOB >

  < MGR > 7698 < / MGR >

  < HIREDATE > 20 February 81 < / HIREDATE >

  < SAL > 1600 < / SAL >

  < Order > 300 < / COMM >

  < DEPTNO > 30 < / DEPTNO >

  < / ROW >

  ...

  < / LINES >

  Thank you in advance, Sonya

  I don't think it's possible with dbms_xmlgen. I suggest you explore sql/xml to generate your own code xml using the keywords etc. of xmlelement, xmlagg.

  For example:

  Select xmlelement ("LINES"

  , xmlelement ("TEST", "NEW")

  XMLAGG (XMLELEMENT ("ROW",

  XMLFOREST (EMPNO,

  ENAME

  WORK

  BISHOP

  HIREDATE

  SAL

  COMM

  DEPTNO

  ) AS THE FOREST - XMLFOREST

  ) - LINE

  ) - TOT.

  ) - ROWSET

  from EMP;

  you will look like the following:

  New

  7369

  SMITH

  CLERK

  7902

  1980 12-17

  800

  20

  7499

  ALLEN

  SELLER

  7698

  1980-02-20

  1600

  300

  30

• I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows?

  I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows so that I can do the calculations?

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• Script - missing and hotfixes installed for ESX and ESXi

  Can I have the script i.e. missing and hotfixes installed for ESX and ESXi using the CLI power only? out put should be csv format

  You reset the content of the table $Results on each iteration of the baseline.

  Try like this

  $Results = @()
  foreach($esx in Get-VMHost) {
    foreach($baseline in (Get-Compliance -Entity $esx -Detailed | where {$_.Status -eq "NotCompliant"})){
      $Results += $baseline.CompliantPatches |    Select @{N="Host";E={$esx.Name}},    @{N="Status";E={"Compliant"}},    @{N="Baseline";E={$baseline.Baseline.Name}},Name,ReleaseDate,IdByVendor,    @{N="KB";E={(Select-String "(?http://[\w|\.|/]*\w{1})" -InputObject $_.Description).Matches[0].Groups['url'].Value}}
  
      $Results += $baseline.NotCompliantPatches |    Select @{N="Host";E={$esx.Name}},    @{N="Status";E={"NotCompliant"}},    @{N="Baseline";E={$baseline.Baseline.Name}},Name,ReleaseDate,IdByVendor,    @{N="KB";E={(Select-String "(?http://[\w|\.|/]*\w{1})" -InputObject $_.Description).Matches[0].Groups['url'].Value}}
    }
  }
  $Results
  

  It will give the installed and lack of patches which are defined in the non-compliant baslines related to the ESXi host.

  If you want to see all the lines, also the most consistent, omit the Where clause on the base line (foreach) loop.

• Remove the separator of columns and rows in spark DataGrid

  

  Hello

  try searching a bit on the web with no success - how can I remove / handful of visibility of the separators of columns and rows in the DataGrid to spark flex 4.5

  See photo with separators:

  Two ways:

  (1) write a simple custom following appearance (the empty rectangles will cause the separators to disappear):

  (2) make a copy of the default Datagridskin and remove parts of skin 'columnSeparator' and 'rowSeparator.

  -Kevin

• CPU, memory, disk size maximum for the VM limits in ESX servers

  I have a quick question, please let me know the maximum limits mentioned for the VM on the ESX respective versions are correct.

  Version	VM - CPU	VM-memory	VM disk
  5.1 ESXi	64	1 TB (1011 GB)	2 TB
  ESXi 5.0	32

  1 TB (1011 GB)

  2 TB

  ESX 4.1

  8

  255 GB

  2 TB

  ESXi 4.1

  8

  255 GB

  2 TB

  ESX 4.0

  8

  255 GB

  2 TB

  ESXi 4.0

  8

  255 GB

  2 TB

  ESX 3.5

  4

  64 GB

  2 TB

  second question, I have observed in CreateVM County of CPU wizard change for the ESX hosts to the group title with respective to the same host non-cluster? Please let me know your thoughts.

  Hi Arjun18,

  There is no special identifier of 8.1 and 2012 R2. They still use the win 8 / 2012 identifier:

  Windows 8 32-bit: windows8Guest

  Windows 8 64-bit: windows8_64Guest

  Windows Server 2012: windows8Server64Guest

  Concerning

• Satellite L300D-243 and WLAN - limited connectivity

  I just got a L300D-243 and it is especially beautiful, but... when I try to connect to our wireless internet, I get a notification "limited connectivity". I use pack system it is not the fault, known in the pack 2 system. It works fine when I use the cable from the internet, but which sort of defeated the purpose of having a computer that I can carry around.
  So, can someone suggest a remedy?

  Sabine

  Hello!

  Please click the link posted by Feliks. It seems that it could solve your problem with the WIFI connection.

  I recommend also to install the last driver Intel's WLAN. On my Satellite L300, I had some problems with the WIFI connection and a driver update could solve the problem! :)

  Good bye

• Upgrade RAM G570 and the limits of Windows 7

  So I intend to soon spend my PC3 - 10600 Samsung Original 4 GB 1333 MHz to Crucial PC3-10600 8 GB (2 x 4 GB) 1333 MHz. currently I have a version of Windows 7 x 86 and my RAM is limited to 2, 95 GB. I have been informed that the 32-bit version of Windows 7 uses little memory for video cards, that is why it is limited.

  in any case I intend to install the Windows 7 x 64 version when I upgrade the RAM, I'll be able to use all the RAM, or I'll be limited again? If so, will the amount of available memory I get?

  Data sheet:

  i3 - 2330M @ 2.2 GHz (paired with Intel HD Graphics 3000 1 GB)
  AMD Radeon HD 6370 M 1 GB (can be activated through ATI Catalyst)

  Any help would be appreciated.

  Sincere greetings.

  Hello

  Here is a better answer to that

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-happen-when-i-install-8...

  8 GB of RAM on a 32 bit OS will allow you to use around 3.1 GB 3.5 GB.

  Best regards

  Solid Cruver

• How can IPv4 and ipv6 limited connectivity, I connect to the internet.

  I've connected ok then the next day he get limited on ip4 and 6 connectivity, I use a flash stick to write about you that wifi can't connect. I know I, m an area reactive, as there are 12 other sites, but even without password sites give the same message.

  Try to turn off your router, or a wireless connector for a few minutes and then turn it back on.

  Restart your PC.

  Open Internet explore and it will give the option to diagnose the connection problem, run it to detect and solve the problem of connection.

• GroupDataModel how to search for an item and row

  Hi all!

  I have a problem with GroupDataModel.

  I create and fill out the template as below:

  
  m_model = new GroupDataModel(QStringList() << "displayName", this);
  ...
  QVariantMap entry;
  entry["contactId"] = QString::number(contact->getId());
  entry["displayName"] = contact->getDisplayName();
  entry["icon"] = contact->getSmallPhoto();
  
  m_model->insert(entry);
  

  After I cath some report like contactDeleted (int id) and want to remove the related item of the model:

  void ContactsViewModel::onContactDeleted(int id)
  {
    //QVariantList indexPath = m_model->lowerBound(QVariantList() << QString::number(id));
    //QVariantList indexPath = m_model->lowerBound(QVariantList() << id);
    //QVariantList indexPath = m_model->find(QVariantList() << QString::number(id));
    QVariantList indexPath = m_model->find(QVariantList() << id);
  
    if (!indexPath.isEmpty())
    {
      m_model->removeAt(indexPath);
    }
  }
  

  But model will always return row to the first article! I used and GroupDataModel::find and GroupDataModel::lowerBound, but result is still the same!

  Please help me, how can I find point correct?

  Hello

  My understanding of the documentation, it is possible to search only the fields that are in sortingKeys.

  I think that GroupDataModel is the construction of indexes on these areas.

  I did some tests:

  If displayName is present in sort keys:

      GroupDataModel *model = new GroupDataModel(QStringList() << "displayName", this);
  
      QVariantMap entry;
      entry["contactId"] = "100";
      entry["displayName"] = "Alex";
      entry["icon"] = "icon1.png";
      model->insert(entry);
  
      entry["contactId"] = "200";
      entry["displayName"] = "Andrew";
      entry["icon"] = "icon2.png";
      model->insert(entry);
  

  then by displayName will work correctly:

  QVariantList indexPath = model->find(QVariantList() << "Andrew");
  qDebug() << "indexPath" << indexPath << "\n";
  // this will print (QVariant(int, 0) ,  QVariant(int, 1) ) which is
  // section 0, item 1
  

  But research by contactId won't work, because it is not present in sortingKeys.

  If you add contactId to sortingKeys:

  GroupDataModel *model = new GroupDataModel(QStringList() << "displayName" << "contactId", this);
  

  then by searching only by displayName will no longer work. Find() maps values to keys, it will only return entries with empty contactId. But lowerBound() can be used instead:

  QVariantList indexPath = model->lowerBound(QVariantList() << "Andrew");
  qDebug() << "indexPath" << indexPath << "\n";
  // this will return:
  // indexPath (QVariant(int, 0) ,  QVariant(int, 1) )
  

  Please note that the lowerBound is not a complete replacement for find. It returns a suggested for element insertion index. So if she is unable to find a match, it will return (0, 0) like suggested insertion point, but not a row empty.

  When you have multiple sort keys the code depending on type of work to find a name:

      GroupDataModel *model = new GroupDataModel(QStringList() << "displayName" << "contactId", this);
  
      QVariantMap matchMap;
      //matchMap["contactId"] = "200";
      matchMap["displayName"] = "Andrew";
      QVariantList indexPath = model->lowerBound(matchMap);
      qDebug() << "indexPath" << indexPath << "\n";
  

  But if the name is not found lowerBound will return (0, 0) - a proposed insertion point. Is not possible to differentiate the value of return "not found".

  But if you try to provide a contactId

      matchMap["contactId"] = "200";
      //matchMap["displayName"] = "Andrew";
  

  It will not work, because it searches in the order in which the sortingKeys have been reported.

  In this case, it will try to 'empty' QVariant DisplayName of match, find nothing and will be (0, 0) return as insertion point proposed without even trying to match contactId-s.

  The find() function is not appropriate as well because it performs the exact match on all fields and requires that all sortingKeys to be defined.

  I hope I have not confused you completely now!

  So, the conclusion seems to be:

  Find() cannot find an exact match and compared all the keys of the supplied with keys in sortingKeys. If values are omitted it is expected that they are NULL in the model.

  lowerBound() returns a suggested insertion or (0, 0) point, if nothing has been put in correspondence. He compares the values passed to it with the sort of keys from left to right (if the first sortingKey did not match it does not compare).

  If these methods are not well suited for finding a specific key value. A possible workaround is an iteration model entries manually and by comparing their values, but it's slow.

  I suggest to create your own datamodel by inheriting from the class DataModel. It is not very difficult, and you can implement any kind of search in there.

• Not supported. of static vNIC to the Palo and Vic CNAs for ESX 5

  Hello

  I looked everywere see that clearly described. Most of the sources list only the no. dynamic vNIC taken in charge. Then I found a document describing the no. adapters for static and dynamic types for some operating systems and ESX 4. But not ESX 5. Someone at - it a CISCO document describing this? I think documentation is vey vague about that.

  If no doc, tdll just me, please... M81kr and CIV

  The calculation as Abi said is based on the number of uplinks recognized.

  The calculation is [15 * (number of links recognized IOM)]-2.

  1 uplink [15 * 1] = - 2 = 13 vNIC/vHBAs

  Uplink 2 = 15 * 2] - 2 = 28 vNIC/vHBAs

  4 uplink = [15 * 4] - 2 = 56 vNIC/vHBAs

  Source: http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/configuration_limits/2.0/b_UCS_Configuration_Limits_2_0.html

  Kind regards

  Robert

• my wifi guard stop and say limited access, how can I solve this problem?

  tab connection WiFi on my menu bar appears with a yellow top triangle and when I click it says my connection has limited access, I click with the right button on my connection and tap status, then diagnose that the problem and fix it, but it fixed it for an hour or so that it reappears and stop my internet connection. At the time of diagnosis, he said the problem was with the network gateway and that it is now fixed, but the same problem happens again in an hour or two. Someone know how I can get the fixed peramently?

  Thank you

  Hello

  
  Method 1:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  
  Method 2: Uninstall and reinstall the network adapter drivers. Follow the steps mentioned.
   
  (a) click Start, right click on the computer.
  (b), click Properties, click Device Manager
  (c) Expand network adapter, right click the Wireless option adapter, click Properties, click the driver tab, click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.
   
  See the link below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  For more information, see the article mentioned below:
  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows