CPU, memory, disk size maximum for the VM limits in ESX servers

Similar Questions

• Maximum disk size hard for the

  I have the hp pavilion slimline s3712f and my internal SATA hard drive crashed.  What is the maximum size that I can intall in this system? I have my system restore disc.

  MarilynFish wrote:

  I have the hp pavilion slimline s3712f and my internal SATA hard drive crashed.  What is the maximum size that I can intall in this system? I have my system restore disc.

  Hello

  That said 500 GB:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=3824206&prodTypeId=12454&ObjectID=c01659236

  However, a 750 GB hard drive might work too. I can't say with certainty that your pc is a desktop computer and this section is for laptops, but the recovery disk/s may not work on a drive that is much larger than the original one in any case.

• Y at - it "Documented" maximum for the data by vCenter store

  Hi all

  I know that there is no maximum documented to number of data store by vCenter (5.0), but I would like to know if there is a desirable number? The reason behind this question is to exclude some question of infrastructure at our end.

  Also note that we do not store data in Clusters.

  Thank you

  Karthik Varadaraja

  The maximum number of warehouses of data (volumes) for each host is 256. That was said, I got 1000 hosts (the maximum number of hosts of ESXi by vCenter) which would be a large number of volumes to manage. It is more likely that you will hit other maximum rates (network, storage device, that the vCenter is set up to handle) until you hit that one. Keep in mind that the more objects, you have in vCenter, the more process and the greatest impact on performance.

  I think a better question is how many shared across how many and how clusters volumes of ESXi hosts per cluster you have? Related to this would be mixture of CPU/memory and find out if the vCenter is virtual on a system already mired or it is a standalone system? Finally, what exactly is the question that you challenge?

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• How to configure the virtual disk as SSD for the customer?

  Hi all:

  I have a virtual machine in an SSD, the guest operating system is Windows 8, but the guest OS, the virtual disk as 'hard drive '.

  Can I set the virtual disk as SSD for the guset? (Like VirtualBox)

  Thank you!

  Irake99 wrote: can I put the virtual disk as SSD for the guset? (Like VirtualBox)

  No, IDE or SCSI are your only choice.

• Reconfigure the VM - CPU, memory, disk, etc.

  Any stubs of autonomous WF available for the reconfiguration of the VM, please let me know.

  Trying to develop an Interface that will call a workflow with reconfigureSpec and the virtual machine must update the virtual hardware.

  Thank you in advance.

  The workflow integrated into vCAC (5.2) of reconfiguration of the VM is not directly callable as a VM regular/WFStub Stadium. In addition, this workflow automatically starts a restart, which is not always desired (or when you use options such as HotAdd). You write that you create an interface to call a workflow. In this case, it would be wise to create a vCO or PowerShell / PowerCLI workflow that you use to reconfigure the computer (which is pretty easy). As in the vCAC that automatically would be a way sure to what after new hardware parameters data collection would be visible in vCAC anyway updated virtual machine configurations.

  Best regards, Ronald

• High CPU and disk utilization slows down the response

  Two years, Pavilion dv7 - 2273ca running Windows 7 64-bit; Norton 360; IE8; Thunderbird; Microsoft Office 2007.  Tend to have several windows open at the same time.  For automatic updates

  Almost every day the laptop enters a period of very high CPU usage; often accompanied by high disk usage.  The response time of the laptop is compromised to the point that I often have to stop using it until activity slows.  I try to use the resource monitor, but do not know enough to say if the legitimate operations or something wrong.  Norton frequently shows svchost.exe and iexplore.exe as a heavy user of the CPU.

  Is this a normal behavior?  If not - any advice on how to identify the culprit?

  On the advice of a HP technician, I ran check disk, and then restore the system in August.  end hard drive.  System Restore did not difference in performance.

  Most of the processor have more of the base, there will be a CPU 0 and 1 for the dual core processors. Different colors are different carrots 0 and 1

  If you sort as I proposed that the highest CPU usage will float to the top, you have to watch it when your cpu pork starts to act up.

  The colors of disc are reading and writing, its hard disk is read or write data on the trays.

  A high utilization of the processor or disk can be considered normal at times, but should not go on constantly.and by dragging down the performance of the system

  Lets say you run a video in your browser, the CPU usage rises, running other programs can do the same thing.

  The disk activity can be high at times also, depends on what you do on the PC, but shouldn't be high all the time.

  http://www.TechRepublic.com/blog/window-on-Windows/learn-how-to-use-the-Windows-7-resource-monitor-for-effective-troubleshooting/3139

  http://www.PCWorld.com/article/241677/how_to_use_resource_monitor.html

• Disk space required for the restructuring of the DB

  Hi all
  
  Running Essbase 11.1.2.1
  
  Sought a definitive answer to this and can't seem to find one, hoping that someone here can provide some clarification.
  
  
  For the sake of arguments, if I wanted to make a '' RESTRUCTURING '' through the Regional service for a 50 GB database, how much free space will have to complete successfully?
  
  A. probably simplified view (assuming the data must land on ora-ess01, have a few "Fireworks" and then go back to the DB), I imagine that something around 150% the size of the file would be sufficient, so about 75 GB free.
  
  We are being advised by our consultants to have 250%, which would mean 125 GB... im assuming they are correct, because they know much more than we mere mortals (me), but if someone could shed some light on this it would be appreciated.
  
  Thank you
  
  JB

  You don't mention if it's ASO or OSB. I'll assume BSO. That, to at least the size of your .pag, .ind, .otl, .esm combined files as it makes copies of all these. a little more would be food. Of course that would be the minimum and if a single database gets restructured and allow growth of DB.

  With ASO, you need more space because it creates a copy in the temp directory for as well as the .dat file and so I heard the recommendation of 2 times your dat file, but I think you could get away with less.

  I don't know what other factors are your consultant is taken into account I don't know your environment.

  I should mention that it's for a simple restructuring, if restructuring is done by exporting the data, delete the DB and reloading, then much more disk is necessary because data would not be compressed on the disk in the export.

  Published by: GlennS_3 on January 23, 2012 07:45

• Calculate the disk space required for the INDEX

  Hello
  
  How to calculate the disk space required to create an INDEX? Please tell me where I can get the details of resources.
  
  For example:
  I need to create a non-UNIQUE INDEX on the columns, an approximate size would do.
  
  < PRE >
  NOT NULL DATE EVENT_DATE
  APPT_DATE_SLOT VARCHAR2 (15)
  EVENT_STATUS VARCHAR2 (4)
  < / PRE >
  
  The table has some 7 300 000 rows. I would like to know how to calculate too.
  
  All AIDS are very much appreciated.

  A rough estimate of the index space will need is possible by

  adding the actual length expected from each column, plus 6 for the rowid, 2 for the number of the X-header of the rows in the table that will be so an entry

  Date are 7 bytes internal + 15 + 4 + 2 + 6 = 34 X 7.3 M = 248200000 X General fresh for the block header, initrans, etc...

  We will use 20% overhead block or 1.2 X 248200000 = 297840000, which is about 285 M

  The actual distribution will vary according to your method of range tablespace.

  HTH - Mark D Powell.

• memory error. and suggestion for the purchase of new system

  Masters of Hai,

  I'm using a core 2 duo processor system intel centrino, with 4 GB ram 60 GB HDD system and 250 GB extrnal USB hard drive.

  If I run video conversion programs, it starts normally. But when you start adding videos in the Middle, adding video files, it says memory. My system is 32-bit type.

  I am a professional video grapher. Also, I plan to purchase the new system win 7 64 bit system. For the use of related works such as conversation, dvd video and audio creation (professionally) and audio, dubbing programs etc...

  For this type of works, what is the minimum recommended configuration. Should be quickly in the work process, with getting them blocked.

  Hello

  1. may I know which application do you use to convert videos?

  2. where the converted file be saved?

  Please check if you are facing the same question when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select Safe mode with networking option.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vista with networking.
  e. when Windows starts, check if the network card is listed. (Use an ethernet connection in SafeMode with networking)

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  (Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.) Follow step 7 in the article above).

  Regarding your query, you can check the system configuration required, printed on the back of the cover of software you are trying to install.

  You can also contact the manufacturer for more information.

  Post back with the State of the question.

• image size different for the same photo?

  Hello

  1.

  On Fotolia, I choose to buy sizes of different images of the same picture... makes a difference not only on the price of the image itself, but on the extra work (resizing of images). As it seems on Adobe Stock there is on the size of the image by image, I'm right? If so, is there any adobe auto resize image tool when I'm working on a web project that requires the size of the image is 72 dpi? Or what I need to change the size of the image to each time a download one to reach the size of the project? I intend to make a subscription of one month of 750 images.

  2.

  How long are the images available on my account to download?

  Thank you for a bit of feedback

  1: there is only one size. The highest resolution of Fotolia. If you use them for the web, you want to resize them with a graphic like Fireworks or Photoshop editor or really any image editor. That said if you build your site in Muse, you don't have to do anything. Just add the image and the Muse must convert it for you.

  2: once they are allowed, they are yours to use forever.

• Size/resolution for the iPhone?

  Hi, is there a resolution/size I can work on that will look great on iphone 4, 5 and 6?

  Only you guys usually use to create applications for the iPhone?

  Thank you

  Digital Publishing Suite helps | Creating documents for multiple devices

  iOS

  For iPad, you can create a 1024 x 768 single Folio that works on HD and SD iPads. Similarly, you can create a 480 x 320 single Folio that works on iPhone HD and SD (see creating a multi-rendu articles). We recommend that you create a rendering of 1136 x 640 extra that works on the iPhone 5 and 6 devices.

• Size specific for the rounded Rectangle tool

  Is there a way to specify the dimensions of the rounded Rectangle tool as there is for the Rectangle tool?  I like to draw my boxes to rays already on them (save time), but I'm never going too fast and short stop or through the size I want.  If I could punch in numbers I want, then I know it would be true - and if it goes much faster.

  Here it is:

  

• How to see the font size larger for the radiobutton.

  Guys,
  
  I need to see the small larger font for the radiogroup.
  
  I tried to install this style = "" are-size: large "for"
  
  Attributes of HTML table cells
  
  but still not able to show the largest font size.

  Hello

  Add in the HTML page header

  Replace PX_YOUR_ITEM with your radio group element name

  BR, Jari

• Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) FOR the CD-ROM/DVD-road DRIVE

  I just downloaded iTunes and now my = CD-ROM/DVD-ROM Drive does not work on my Compaq laptop. This is the error that he sees when I go to Device Manager. I need this problem as soon as POSSIBLE, I work on websites and I can't go without my CD burner. Anyone who can help help please. I'm panicking right now.

  Thank you

  Hello

  Use system restore to before that you installed iTunes when the drive was working.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ======================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.