VM on Update2 and Update3
Hello
two questions:
1 - a VM with ESXi 3.5 U2 can run on another host ESXi 3.5 U3. Simply copy this virtual machine with the browser and add to the inventory of ESXi 3.5 U3?
and
2 - an upgrade to U3 U2 hold the same configuration and VM on the host, is transparent?
Thank you.
One thing that you usually when you upgrade your version of ESXi is also updated the VMware Tools in the virtual machines. For an upgrade to the latest version of ESXi, you won't actually use the update installation CD 3. If you don't have VirtualCenter, take a look at the methods here - http://www.vm-help.com/esx/esx3i/Patch_3i_without_VC.php. Before the upgrade, it is a good idea to have a backup virtual machines plus one of yoru ESXi config using vicfg - cfgbackup.pl.
Tags: VMware
Similar Questions
-
Reference Dell r710 12core 32 GB super slow with sql and need help exch2010
Hi all and thanks in advance.
I have a new r710 which has a great for a few months then it has slowly degraded until now, it's an analysis on all the vm, I can't tell which one is it slows down because all the performance counters show a lot of place in all categories. I've been doing the reconnection to the datastore2 and datastore1, then I get a restored connection. I moved the Exchange 2010 vm to the datastore3 that does not have errors, but it is still slow. I wonder if I should move all the vm off the other two data stores and delete, and rescan the esxi for storage and back as data 1 and 2 stores. I have esxi 4.0 not improved update2. and there an esxi license and there 6 installation of drives western digital black 1 TB in raid1 3 - then I have every configuration of raid as a logical drive which is then turned into a data store.
I don't know if the downturn is the hardware or a virtual machine is pulling them down - I'll start out them one by one to test tonight, but the advice or opinions are welcome.
I don't know what your storage looks like initially but I would recommend HAVE TO go with update 2 - we had all sorts of problems with particular storage when you use storage VSA as the left hand. Update 2 provided some great improvements to the vmkernel regarding VMFS.
You can also publish newspapers vmkernel of any of the host in question and we can take a loo at it.
Seriously, update your esx/esxi servers is always a good practice when you have weird problems.
See you soon,.
Chad King
VCP-410. Server +.
Twitter: http://twitter.com/cwjking
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
Windows® Installer. V 4.5.6002.18005msiexec/option
[optional parameter] Installation optionsInstalls or configures a product/aAdministrative installation - installs a product on the network/j[/t ] [/g ] Publishes a product - m for all users, allows the current userUninstalls the productDisplay options/ quietQuiet mode, no user interaction/ passiveAutomatic mode - only progress bar/ q [n | b | r | f]Sets the user interface leveln no user interfaceb Basic UIr reduced UIf-full UI (default)/ HelpHelp informationRestart options/norestartDo not restart after the installation is complete/promptrestartPrompts the user to restart if necessary/forcerestartAlways restarts the computer after installationLogging options/ l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]i status messagesw warnings recoverablee-all error messagesa startup of actionsr registers of the specific action of theu user requestsc initial UI parametersm out-of-memory or fatal exit informationo disk out-of-space messagesp - Terminal propertiesv performancex extra debugging information+ - Add to the existing log file! -Flush each line in the log* - Log all information, except the x and v options/ logEquivalent of / l *.Update options/Update [; Update2.msp] Apply updates/ uninstall[; Update2.msp] / package Remove the updates of a productRepair options/f [p | e | c | m | s | o | d | a | u: v]Repairs a productp only if the file is missingo If the file is missing or an earlier version is installed (by default)e If the file is missing or an equal or higher version is installedd if the file is missing or a different version is installedc If the file is missing or checksum does not match the calculated valuehas all the files to reinstall the forcesu all (default) user-specific registry entriesm all requirements (by default) computer-specific registry entriess all (default) shortcutsv-runs from source and recaches local packageSetting public properties[PROPERTY = PropertyValue]Consult the SDK Windows® install to get additional documentation on thecommand line syntax.Copyright © Microsoft Corporation. All rights reserved.Portions of this software are based in part on the work of the Independent JPEG Group.Hi Ruben Ganesh.
1. When do you have the problem started?
2. did you of recent changes on the system?
You can read the following article and try Method 2, 3 and 4A proposed to solve the problems of Windows install.
Hope this information is useful.
-
I can't uninstall java (TM) 7 update3 using the windows uninstall program what do I do?
Hello
1. what happens when you try to uninstall it?
2 have you made changes on the computer before this problem?
3. facing this problem with Java?
I suggest that you run the patch from the following link and check the status of the issue.
Problems with programs that cannot be installed or uninstalled.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
You can also refer to:
-
Error update3.exe "instruction at 0x7c84cd12 referenced memory at 0 x 000000014.
Original title: update3.exe
I get a random error called "Update3.exe" with a message: "the instruction at 0x7c84cd12 referenced memory at 0 x 000000014. The memory could not be written. I find an answer, it's a worm, another it's a ParetoLogic file, and another that it is a normal part of Windows update.
Anyone know the facts?
Thank you!
It's no help since I had already done these things. I am a COMPUTER professional. It's on a Server 2003 Standard. I found the file in a 'common' folder, having to do with a software called TechGeekToolbox. I uninstalled the program and that you have no more errors.
-
Problems with Windows Installer - installer stops and shows the dialog on the command prompts
Hello
I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).
I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.
Here is the info that appears in the dialog box:
Windows® Installer. V 5.0.7601.17514
msiexec/option
[optional parameter] Installation options
Installs or configures a product
/a
Administrative installation - installs a product on the network
/j[/t ] [/g ]
Publishes a product - m for all users, allows the current user
Uninstalls the product
Display options
/ quiet
Quiet mode, no user interaction
/ passive
Automatic mode - only progress bar
/ q [n | b | r | f]
Sets the user interface level
n no user interface
b Basic UI
r reduced UI
f-full UI (default)
/ Help
Help information
Restart options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user to restart if necessary
/forcerestart
Always restarts the computer after installation
Logging options
/ l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
i status messages
w warnings recoverable
e-all error messages
a startup of actions
r registers of the specific action of the
u user requests
c initial UI parameters
m out-of-memory or fatal exit information
o disk out-of-space messages
p - Terminal properties
v performance
x extra debugging information
+ - Add to the existing log file
! -Flush each line in the log
* - Log all information, except the x and v options
/ log
Equivalent of / l *.
Update options
/Update [; Update2.msp]
Apply updates
/ uninstall[; Update2.msp] / package
Remove the updates of a product
Repair options
/f [p | e | c | m | s | o | d | a | u: v]
Repairs a product
p only if the file is missing
o If the file is missing or an earlier version is installed (by default)
e If the file is missing or an equal or higher version is installed
d if the file is missing or a different version is installed
c If the file is missing or checksum does not match the calculated value
has all the files to reinstall the forces
u all (default) user-specific registry entries
m all requirements (by default) computer-specific registry entries
s all (default) shortcuts
v-runs from source and recaches local package
Setting public properties
[PROPERTY = PropertyValue]Consult the SDK Windows® install to get additional documentation on the
command line syntax.Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.
Thank you
Linney thanks for your response!
The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).
I tried the option "Run As Administrator" and it did not work. However, you gave me an idea that has provided a work around that allowed me to install the program.
Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).
Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.
So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.
For now, at least, I have a work around I use until I find a solution to this problem of permanent
Thanks for your help and for taking the time to answer!
I hope this can help someone else in the future
-
For our REST services we have implemented a number of privileges.
Each right is defined for a number of roles.
So, we have the same problem as described here: Client OAUTH with more of a privilege
Documentation of OAuth (pdf) package differs from oauth package specification in the database.
We run on Oracle Standard Edition 12.1.0.2.0 3.0.2.294.08.40 ADR.
Test cases running in questions:
Create:
Meets the exception, because the privilege name table is not extended.
Start (oauth.create_client)
p_name = > 'oauth shop. "
p_grant_type = > 'client_credentials ',.
p_privilege_names = > ' shop, test,
p_support_email = > ' mailto:[email protected] ');
end;
Update1:
Meets no exception, but does nothing.
declare
l_privileges t_ords_vchar_tab: = t_ords_vchar_tab();
Start
l_privileges. EXTEND (2);
l_privileges (1): = 'unique ';
l_privileges (2): = 'test ';
() OAuth.update_client
p_name = > 'oauth shop. "
p_owner = > 'YOUROWNER ',.
p_description = > NULL,
p_redirect_uri = > NULL,
p_grant_type = > 'client_credentials ',.
p_privilege_names = > l_privileges);
end;
UPDATE2:
Meets the exception, because the privilege name table is not extended.
Start
() OAuth.update_client
p_client_id = > 10626,
p_name = > 'oauth shop. "
p_editing_user = > "Change user"
p_allowed_origins = > NULL,
p_description = > NULL,
p_redirect_uri = > NULL,
p_support_email = > ' mailto:[email protected] ',
p_support_uri = > NULL,
p_priv_names = > ' shop, test ");
end;
OAuth.rename_client does not work that way.
It doesn't do anything.
We could not work around the problem by using only a privilege by client because there is a unique uri models as key constraint ' / shop / *' ADR on the scheme.
In this way it is impossible to create multiple privileges (each for a certain role) access to the same uri scheme.
Is this a known issue?
After some trial and error, we found a solution to our problem!
According to the documentation, you will need to define a privilege name when you create a customer. But OAuth clients who obtain access through access client identifying information flow do not need privileges. Thus, we create customers with privilege names set to NULL now.
What we do is to grant to the customer a specific role that is defined for specific privileges.
Here are the reasons why we didn't get the question earlier. The token you generate a client is linked to the privileges given to the customer at the time that the token is generated.
We have updated privileges customer and used the same token expect a different result, which was not the case. The rights are tied to the token on the creation of a token.
We found out about it today and tested two-legged oauth clients (with a flow rate of access client_credential) with no particular privileges and only granted roles. Given that the roles granted privileges everything works as expected.
Still leaves the ORA-error when providing separated by commas in the names of privilege to oauth.create_client and oauth.update_client.
But our problem is solved.
For completion. Here's a sample script that solves our problem:
-create roles
begin ords.create_role ('role.shop'); end;
begin ords.create_role ('role.test'); end;
-Create privileges of the shop, models and roles
declare
l_roles owa.vc_arr;
l_patterns owa.vc_arr;
Start
l_roles (1): = "role.shop";
l_roles (2): = "role.test";
l_patterns (1): = ' / shop/pk / *';
l_patterns (2): = ' / shop/gk / *';
() ords.define_privilege
p_privilege_name-online "priv.shop."
p_roles-online l_roles,
p_patterns-online l_patterns,
p_label-online 'Shop Privilèges',
p_description-online 'Shop Privilèges'
);
end;
-create test templates and roles privileges
declare
l_roles owa.vc_arr;
l_patterns owa.vc_arr;
Start
l_roles (1): = "role.test";
l_patterns (1): = ' / test / *';
() ords.define_privilege
p_privilege_name-online "priv.test."
p_roles-online l_roles,
p_patterns-online l_patterns,
p_label-online 'Privileges of Test',
p_description-online "Test Prileges"
);
end;
-create customer shop
Start
() OAuth.create_client
p_name-online "oauth.shop."
p_grant_type-online "client_credentials."
p_privilege_names => NULL,
p_support_email => ' mailto:[email protected]'
);
end;
-create customer test
Start
() OAuth.create_client
p_name-online "oauth.test."
p_grant_type-online "client_credentials."
p_privilege_names => NULL,
p_support_email => ' mailto:[email protected]'
);
end;
-to grant client roles
begin oauth.grant_client_role ('oauth.shop', 'role.shop'); end;
begin oauth.grant_client_role ('oauth.test', 'role.test'); end;
commit;
After doing that the access token for the client oauth.test and has access to
-/ Shop/pk / *.
-/ Shop/gk / *.
-/ test / *.
The access to the oauth.shop client token has access to
-/ Shop/pk / *.
-/ Shop/gk / *.
-
U2, SRM and SRA vCenter 6.0 compatibility
Hi all
We currently have vCenter 5.5 Update 2 with SRM 5.8.1 and SRA for EMC VNX (EMC VNX SRA with MirrorView Enabler for 5.0.39 VNX) and want to upgrade to vCenter 6.0 Update 2.
In the table below (from VMware interoperability matrices):
VMware Site Recovery Manager 6.1 6.0 5.8.1 VMware vCenter Server 6.0 U2 THERE VMware vCenter Server 6.0 U1 THERE THERE VMware vCenter Server 6.0 THERE VMware vCenter Server 5.5 U2 THERE I see that vCenter 6.0 U2 only supports 6.1 SRM.
I looked here:
Download VMware Site Recovery Manager for disaster recovery and planned migration
For the SRA that I need (EMC VNX SRA with MirrorView Enabler for VNX) and couldn't find it there.
This is a chart of the VMware Compatibility Guide:
Name of the partner Name SRA Version SRA SRM version (s) EMC EMC VNX SRA with MirrorView Enabler for VNX 5.0.2 / 5.0.39.139 5.8 SRM | SRM 5.1 Update3 | SRM 5.5 Update1. SRM 5.5 | SRM 5.1 UPDATE 2 | SRM 5.1 Update1 | SRM 5.1 EMC EMC VNX SRA with MirrorView Enabler for VNX 5.0.2.77/5.0.39.149 SRM 6.0 | 5.8 SRM | SRM 5.5 Update1. SRM 5.5 According to this, there is no SRA for MRS 6.1.
My questions are:
1 MRS. 6.0 works with vCenter 6.0 U2 (I know that it is not taken in charge with respect to the interoperability of VMware)?
2. for employees of VMware - do you know if there is an adapter (for EMC VNX) to version 6.1?
Bottom line: I am looking for EMC VNX SRA with MirrorView Enabler for VNX SRM 6.1 (which is the only currently taken SRM supported by vCenter 6.0 Update 2).
Thank you!
Hello Daniel
Your questions:
1 MRS. 6.0 should work with vCenter 6.0U2, but as you mentioned, it is not supported by VMware.
2. as far as I know, such a DSM is underway. I suggest you speak with your EMC representative to confirm that and give you an ETA.
Best regards
Stefan
-
vCSA and connection VNXe3100 LUN failed
Hi guys, how are you?
I got a problem here. Let me say the scenario:
I have a VNXe3100 LUN iSCSI-exporter. The export process are all conducted in the storage interface. We got a single ESXi host that accepts the LUN, it goes up and everything runs smoothly.
But when I'm building a clustered with two ESXi environment and the vCSA, the is working properly. When you deliver the LUNS, the vmhab is the storage, the path become active and the LUN is in operational condition mounted, but the data store is not mounted. Even using the storage... Add ability to add manually storage fails.
I think this could be a problem of vCSA, because with isolated hosts, everything works.
Does anyone have any idea?
Storage: VNXe3100
Method: iSCSI
Host: ESXi 5.5.0 Update2
vCSA: 5.5.0.20200 build 2183109
See you soon!
Found the answer! Fair value size MTU of the VDS 9000, where it was just in the vmk.
Thanks anyway!
-
The upgrade to vCenter 4.0 Update1 4.1 UPDATE2
I plan on upgrading vCenter 4.0 Update1 4.1 UPDATE2. We will migrate a Windwos 2003 physical server to a virtual machine.
Use Windows 2008 R2?
Traps, concerns or recommendatins?
Thank you!
Tom
Our Update Manager is on a separate virtual computer. Is there a procedure for uprading Update Manager 4.1?
Even under vCenter: install the product... specify the existing DSN, and there will be an upgrade.
André
-
Procedure to change username and password: VirtualCenter and ESX Console
Hi all
I need to change the user and password for VC and ESX Console.
-What is the best procedure to change the user and password for the Console ESX and Virtual Center? (Update3 ESX 3.5 and VirtualCenter 2.5 update3)
-Can do when virtual machines are running?
Tanks a lot.
This is the procedure if you are not the root password - if you know not the root password, you can use the passwd command while logged in as root.
David Weinstein VCP, VCI, VTSP
Consultantr Senior | VMware | [email protected] | P: 847 999-8925 | F: 650 739-0499
-
Hi all
We have 50 machines have ESX 31.2 and 3.5. I have machine that has VC 2.5 (version NOT UPDATED). We are responsible to install update 3.
1 ought to move update 2 first, then got update3? Or can we just go directly to the update 3
2. After reading the notes on update 2 I see it has exactly what it takes 'LIVE CLONING' (even if a virtual machine is running). Now, I don't see that in UPDATE 3. 3 update is a version that has update 2 wrapped inside?
Thx a lot!
1 ought to move update 2 first, then got update3? Or can we just go directly to the update 3
No, you can install VC U3 from the outset.
2. After reading the notes on update 2 I see it has exactly what it takes 'LIVE CLONING' (even if a virtual machine is running). Now, I don't see that in UPDATE 3. 3 update is a version that has update 2 wrapped inside?
It is there, try cloning a VM while it is running, if you actually run VC U3, it should work...
-
Run an update after another on the toad sql and sqlplus
I need to do the following updates. First run Update1 and Update2
I hace sqlplus and Toad, but I don't know how to do it in any of them--UPDATE 1 update cm_item_loc l set l.primary_supp = (select supplier from cm_item_supp_country s where primary_supp_ind = 'Y' and l.item = s.item); -- UPDATE 2 update cm_item_loc l set (local_item_desc, local_short_desc) = (select item_desc, short_desc from cm_item_master i where l.item = i.item);
a toad - press f5 to run your code as a script.
in plu sql, create a file in your start sqlplus in directory and reference it with a symbol
SQL> @test.sql D - X 1 row selected. Elapsed: 00:00:00.00 no rows selected Elapsed: 00:00:00.00 SQL>
-
level of Rollback statement and 2PC/2PL
Mr President
I'm very big thing back to oracle db but confused here:
Level in oracle Rollback statement says:
(1) If a single LMD fails while executing this single statement is rolled back.
(2) the oracle server implements a default backup point.
(3) all other changes are preserved.
(4) the user has to interrupt transactions explicitly by executing a statement commit or rollback.
issues related to the:
............. (1) assumes that I have a transaction T1, T2... TN.
Obviously T1 starts with begin and ends to commit / rollback. It may look like:
the same for the T2, T3,..., TN.begins ............. some DML statements commit / rollback.
Let say for transaction Ti a DML said update statement fails for bad network link.what will happen next?
If my interpretation is not bad:
A lock will run on the resources.and she will invest in the last commit point.
but, according to the statement (what our faculty of WDP o interpreted) level restoration it will commit to the last well played DML when the central database server crashed eg.what occur if you restart your computer during an operation to copy - paste .If it's true how oracle ensures consistency? because the other site that can not get network connection, won't the other transaction state.
Please comment on this and clear my doubt.
Edited by: mango_boy, 1 Sep 2009 01:15
edited the title as it was with a silly mistake ;-). i admit that I should be more careful for this terminology
Published by: mango_boy on Sep 4, 2009 12:50
(my review of teachers is being updated)A DDL statement cannot be part of a transaction (or, more precisely, before 11 g R2, issuing a DDL statement will be automatically and impliictly validate the previous transaction, starts a new transaction and validate this new transaction if it is successful). Since the DDL changes the structure of the database, it is exceptionally difficult to do in a transactional manner. You cannot restore a DDL operation (although Oracle can if the DDL statement fails). This may change to some extent in 11g R2, some of the new arrivals appear to allow several editions of the code runs in the same time, potentially changing DDL transaction semantics. It'll be a few months before the documentation is available on this feature, however.
As you say errors in (this scenario) is not related to the error DDBMS, and these errors shouldn't be a syntactic error, if I am mistaken please clear my confusion) then what are the types of error in the database can cope?
If update3 is not intended to be distributed operations (I guess that DDBMS is expected to mean "distributed database management system"), I guess it could be a SQL syntax error, but which would cause the statement fails before that she had even started, which rather defeats the purpose of roll back to a save point, because there would be no changes to roll back. In addition, a syntax error shouldn't be possible in a production application - if a SQL statement in a procedure has an error, the entire procedure may not compile. More commonly and more interesting for what you ask, would be the case where the update statement updates of 100 lines and then generated a line 101 update constraint violation.
Justin
-
Hi, I'm new on this forum, but long-time Sony fan and supporter. I recently bought a new Sony BDP-S570 BD player to go with my old Philips 32 '' LCD HDTV, the new Sony KDL-46HX800 3D TV and the STR-DA4600ES receiver. I have also several audio SACD discs I wanted to play with this configuration.
Here's the problem I have:
I currently have my receiver output HDMI connected to my HDMI TV Philips entry. I have my BDP-S570 connected to the Sony STR-DA4600ES HDMI4 entered. I put the BDP-S570 to output SACD PCM since this receiver that I discovered after I bought it does not support the SACD DSD decoding. Anyway, in PCM mode when I try to play any disc SACD, I see video playback on the TV screen, but there is no audio output. If I put the drive to play only tracks CD (as opposed to the SACD titles) of the disc, then it plays audio in stereo via the PCM mode very well.
I narrowed down it to her get to play SACD by disconnecting the HDMI TV to receiver connection. If I remove the connection HDMI to the TV, the BDP-S570 SACD multichannel audio stream to the receiver. If I turn on the TV the audio stream disappears again. If I connect the player to a compatible old receiver from Onkyo NR-905 HDMI 1. 3A, she plays SACD audio fine even with connected HDMI TV. So it seems to be a bug in signaling of handshake in my Sony (receiver and BD player) components.
Sony support, please have your engineers check this aspect of the game of the SACD through your own line of Sony STR-DA4600ES of receivers with an old connected HDMI TV. It simply doesn't get it!
Sorry for the long-winded post but no other way to describe the details of my configuration to explain it all. Is there a fix in the works for more reliable SACD playback on this player BD BDP-S570 3D? Oh, BTW, I installed the latest firmware update from 13/02/2011 or there abouts. Receiver was last updated available also new out of the box. Please tell me Sony is concerned and is looking to fix this incompatibility in the next version of the firmware! Thank you!I just update my situation with this problem of reading SACD I posted. I see nobody else was interested, but I'll post my resolution and conclusions.
I got my BDP-S570 to play multi-channel SACD through my receiver STR-DA4600ES now by removing a HDMI switch which is connected between a video output HDMI to my receiver and my TV HDMI input jacks. It's the HDMI switch which was somehow not the right signals to the system causing the BD drive to not stream of SACD PCM signals to the receiver. As soon as I removed this switch HDMI from the signal path, it al started to work and read its SACD via the receiver.
Also, I just noticed that the BDP-S570 is streaming music network in multichannel format now on Pandora music! I never saw blue light multichannel light upward when streaming music on the internet before. I don't know if it is also a symptom of the switch HDMI sending bad communications signals to the player OR if there is a change in the last update of the firmware that I installed on my BDP-S570. It's streaming multi-channel music on Pandora as I type this post!
Update: I think the BD drive his downmix PCM multi-channel had put instead if 2-channel PCM. If this can explain why I see multichannel streams now too and has not seen him before. HDMI switch issue was also this masking of screening until previously I suspect. Now with HDMI switch out of the picture, it appears as a multi-channel as it supposed to.
Update2: Well I just tried to change the setting to "DownMix" multichannel stereo PCM BD drive. Then I turned off the BD drive and turned back on to ensure that it restores its settings. I pulled to the top of the current internet music and video broadcasts and guess what? The Sony receiver is always get a stream PCM multi-channel (surround sound)! So it isn't the "DownMix" setting, which is the only cause. Apparently after I loaded the last firmware for this player, it plays now all this internet stream (music and video sites shows) in Multchannel surround sound mode.
Update: too bad people, I found my answer. The cause of constantly multichannel PCM streaming of all my network connections was because I had the BDP-S570 DTS parameter defined on ' Neo: 6 Music ' instead of 'Off' in the settings menu. I set this to "off" and all the music from the internet is now back to regular 2-channel flows. for info. case solved.
Maybe you are looking for
-
My phone icon left the lower bar. How can I move it back
My phone icon left the lower bar. How can I move it back
-
I have about five to ten icons bookmark in the same line as the search and address bar. So I use customize... and I put the bookmarks on the same line bar. I leave the "name"-textbox in each bookmark in white so that only the icons. "" However, only
-
Where to find driver for XP64 PA3570E-1ETA mice.
Hello.Where to find driver for XP64 PA3570E-1ETA mice.
-
delete the backups time machine (all) on an external HD is from another machine
I have an external hard drive with backup TM to a second computer I want to free up space on deleting all backup sets. I understand that simply by moving the folder to the trash and empty it is not the recommended method. So, should I enter TM with t
-
Windows XP Professional; Information System
I have a Dell GX 260, which had been renovated. It has Windows XP Professional loaded.I don't have access to the Windows XP disc. The problem is:When I go to start > all programs > Accessories > system tools > system information, ratherto get the sys