VM return do not all data with Get-Stat

Similar Questions

• RMAN-05556: not all data files have backups can be picked up at SNA

  Dear all,

  By RMAN cloning in 11.2.0.3 database with ebs 11i.

  We get below error.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 03/07/2015 15:36:20

  RMAN-05501: abandonment of duplicate target database

  RMAN-05556: not all data files have backups can be recovered on SNA 15901715

  991

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06100: no channel to restore a backup or a copy of the data file 94

  RMAN-06100: no channel to restore a backup or a copy of the data file 93

  RMAN-06100: no channel to restore a backup or a copy of the data file 92

  RMAN-06100: no channel to restore a backup or a copy of the data file 91

  RMAN-06100: no channel to restore a backup or a copy of the data file 90

  RMAN-06100: no channel to restore a backup or a copy of the data file 89

  RMAN-06100: no channel to restore a backup or a copy of the data file 88

  RMAN-06100: no channel to restore a backup or a copy of the data file 87

  RMAN-06100: no channel to restore a backup or a copy of the data file 86

  RMAN-06100: no channel to restore a backup or a copy of the data file 85

  RMAN-06100: no channel to restore a backup or a copy of the data file 84

  RMAN-06100: no channel to restore a backup or a copy of the data file 83

  RMAN-06100: no channel to restore a backup or a copy of the data file 82

  RMAN-06100: no channel to restore a backup or a copy of the data file 81

  RMAN-06100: no channel to restore a backup or a copy of the data file 80

  RMAN-06100: no channel to restore a backup or a copy of the data file 79

  RMAN-06100: no channel to restore a backup or a copy of the data file 78

  RMAN-06100: no channel to restore a backup or a copy of the data file 77

  RMAN-06100: no channel to restore a backup or a copy of the data file 76

  RMAN-06100: no channel to restore a backup or a copy of the data file 75

  RMAN-06100: no channel to restore a backup or a copy of the data file 74

  RMAN-06100: no channel to restore a backup or a copy of the data file 73

  RMAN-06100: no channel to restore a backup or a copy of the data file 72

  RMAN-06100: no channel to restore a backup or a copy of the data file 71

  RMAN-06100: no channel to restore a backup or a copy of the data file 70

  RMAN-06100: no channel to restore a backup or a copy of the data file 69

  RMAN-06100: no channel to restore a backup or a copy of the data file 68

  RMAN-06100: no channel to restore a backup or a copy of the data file 67

  RMAN-06100: no channel to restore a backup or a copy of the data file 66

  RMAN-06100: no channel to restore a backup or a copy of the data file 65

  RMAN-06100: no channel to restore a backup or a copy of the data file 64

  RMAN-06100: no channel to restore a backup or a copy of the data file 63

  RMAN-06100: no channel to restore a backup or a copy of the data file 62

  RMAN-06100: no channel to restore a backup or a copy of the data file 61

  RMAN-06100: no channel to restore a backup or a copy of the data file 60

  RMAN-06100: no channel to restore a backup or a copy of the data file 59

  RMAN-06100: no channel to restore a backup or a copy of the data file 58

  RMAN-06100: no channel to restore a backup or a copy of the data file 57

  RMAN-06100: no channel to restore a backup or a copy of the data file 56

  RMAN-06100: no channel to restore a backup or a copy of the data file 55

  RMAN-06100: no channel to restore a backup or a copy of the data file 54

  RMAN-06100: no channel to restore a backup or a copy of the data file 53

  RMAN-06100: no channel to restore a backup or a copy of the data file 52

  RMAN-06100: no channel to restore a backup or a copy of the data file 51

  RMAN-06100: no channel to restore a backup or a copy of the data file 50

  RMAN-06100: no channel to restore a backup or a copy of the data file 49

  RMAN-06100: no channel to restore a backup or a copy of the data file 48

  RMAN-06100: no channel to restore a backup or a copy of the data file 47

  RMAN-06100: no channel to restore a backup or a copy of the data file 46

  RMAN-06100: no channel to restore a backup or a copy of the data file 45

  RMAN-06100: no channel to restore a backup or a copy of the data file 44

  RMAN-06100: no channel to restore a backup or a copy of the data file 43

  RMAN-06100: no channel to restore a backup or a copy of the data file 42

  RMAN-06100: no channel to restore a backup or a copy of the data file 41

  RMAN-06100: no channel to restore a backup or a copy of the data file 40

  RMAN-06100: no channel to restore a backup or a copy of the data file 39

  RMAN-06100: no channel to restore a backup or a copy of the data file 38

  RMAN-06100: no channel to restore a backup or a copy of the data file 37

  RMAN-06100: no channel to restore a backup or a copy of the data file 36

  RMAN-06100: no channel to restore a backup or a copy of the data file 35

  RMAN-06100: no channel to restore a backup or a copy of the data file 34

  RMAN-06100: no channel to restore a backup or a copy of the data file 33

  RMAN-06100: no channel to restore a backup or a copy of the data file 32

  RMAN-06100: no channel to restore a backup or a copy of the data file 31

  RMAN-06100: no channel to restore a backup or a copy of the data file 30

  RMAN-06100: no channel to restore a backup or a copy of the data file 29

  RMAN-06100: no channel to restore a backup or a copy of the data file 28

  RMAN-06100: no channel to restore a backup or a copy of the data file 27

  RMAN-06100: no channel to restore a backup or a copy of the data file 26

  RMAN-06100: no channel to restore a backup or a copy of the data file 25

  RMAN-06100: no channel to restore a backup or a copy of the data file 24

  RMAN-06100: no channel to restore a backup or a copy of the data file 23

  RMAN-06100: no channel to restore a backup or a copy of the data file 22

  RMAN-06100: no channel to restore a backup or a copy of the data file 21

  RMAN-06100: no channel to restore a backup or a copy of the data file 20

  RMAN-06100: no channel to restore a backup or a copy of the data file 19

  RMAN-06100: no channel to restore a backup or a copy of the data file 18

  RMAN-06100: no channel to restore a backup or a copy of the data file 17

  RMAN-06100: no channel to restore a backup or a copy of the data file 16

  RMAN-06100: no channel to restore a backup or a copy of the data file 15

  RMAN-06100: no channel to restore a backup or a copy of the data file 14

  RMAN-06100: no channel to restore a backup or a copy of the data file 13

  RMAN-06100: no channel to restore a backup or a copy of the data file 12

  RMAN-06100: no channel to restore a backup or a copy of the data file 11

  RMAN-06100: no channel to restore a backup or a copy of the data file 10

  RMAN-06100: no channel to restore a backup or a copy of the data file 9

  RMAN-06100: no channel to restore a backup or a copy of the data file 8

  RMAN-06100: no channel to restore a backup or a copy of the data file 7

  RMAN-06100: no channel to restore a backup or a copy of the data file 6

  RMAN-06100: no channel to restore a backup or a copy of the data file 5

  RMAN-06100: no channel to restore a backup or a copy of the data file 4

  RMAN-06100: no channel to restore a backup or a copy of the data file 3

  RMAN-06100: no channel to restore a backup or a copy of the data file 2

  RMAN-06100: no channel to restore a backup or a copy of the data file 1

  Concerning

  Villi Kumar

  Dear all,

  Solution:

  Location of the data file is not correct that we are mentioned in the file (init.ora) settings.

  Change the location of data file settings.

  Test the issue again.

  Concerning

  Villi Kumar

• I can't not all sounds with Firefox, but I have a sound with Internet Explorer

  I'm not all sounds with Firefox. I have a sound with Internet Explorer

  Hi bholmes,.

  Have you looked at the article Knowledge Base, what to do if Firefox will play all of the sounds? There are many good advice on troubleshooting in there. You might have its just accidentally disabled for Firefox.

  There is also a chance it's a plugin problem. If the first article does not help, take a look at common audio problems and graphics issues.

  Hope this helps!

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• Average usage of the CPU with get-stat

  With get-stat, I can get average use of the processor in MHz using the metric usagemhz.

  However, by default the maximum and minimum values in MHz is not in data points from 2 months ago.  That's fine if I want to just average, but I also need average peak values.  The average maximum CPU usage is possible with powerCLI?

  The thing is that when you have found these averages and you do that a day or a week of a data value is not enough to really give you a true picture - you need 2 - 3 months.  Can Haw I achieve this with PowerCLI?

  1. you can easily adapt the cmdlet Get - VM to produce the result for 1 or a limited set of the virtual machine

  For example:

  Get-VM-name MyVM | Select...

  Returns the result for 1 computer virtual called MyVM

  If you do

  Get-VM-name my * | Select...

  It returns results for all virtual machines whose name begins with "My".

  2. that's because Select-Object generates a hash table, and by default PowerShell displays like that hash tables.

  To get only the value real exchange the last select like this

  ...

  } | Select AvgCPUMhz - ExpandProperty

  ...

• POS 5.5 could not obtain data with analytical performance data warehouses

  Hi all

  I have two devices POS running version: 5.5.5.180.

  All of a sudden I can not connect to the Web Client for each device.

  POS status show all services in green on the two Pdvs.

  root@vdp:~/#: dpnctl status all
  Identity added: /home/dpn/.ssh/dpnid (/home/dpn/.ssh/dpnid)
  dpnctl: INFO: gsan status: up
  dpnctl: INFO: MCS status: up.
  dpnctl: INFO: Backup scheduler status: up.
  dpnctl: INFO: axionfs status: up.
  dpnctl: INFO: Maintenance windows scheduler status: enabled.
  dpnctl: INFO: Unattended startup status: enabled.
  
  

  By clicking on the Storage tab, displays the error message: "Unable to get data with analytical performance data warehouses" and no data warehouses are listed.

  • VCenter restarts, Pdvs, doesn't change anything.
  • I can connect to Pdvs very well.
  • CP are created.

  I found similar topics but no response... (POS 5.5 ERROR)

  Open a support case and turned out that the POS password user (a user defined in the domain of the @vsphere.local) that was used to access the vCenter has expired. Apparently, there's a bug in vCenter for some versions that makes them expire in 65 days.

• New user created does not all data in reports

  Hi all
  
  I use Hyperion Planning 11.1.2.1. I have a problem when I created a new user in the system through shared Services. Reports are reports and analysis reports.
  
  I have reproduced a current user of the system and applied the same groups and provisions. However, the new user may not display all the data in the reports. However, the current user is able to do. I'm quite literally baffled.
  
  The existing user has been given to the provision of "Planner". In addition, the existing user has dimension security applied as well. It works very well with the existing user, as when I connect as long as existing user, the data is available only for groups and dimensions that it has been assigned to. But when I apply the same groups and provisions to the newly created user, I get absolutely no data, although I can see the report.
  
  But if I ask the Essbase Cluster: provision of administrator to the new user, all data is viewable in the reports, regardless of the dimension of security.
  
  I'd appreciate emergency assistance to get this issue resolved.
  
  Concerning

  Go to EAS, then continue with your application/db and view filters, I guess that for previous users filters?
  If so your new user has filters, if maybe you need to refresh the security filter, of planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• by selecting the most recent decisiondate for a client, not all dates...

  Hello
  
  Consider the following situation:
  I have 4 tables:
  
  
  PD_CLIENT
  CLIENT_ID
  RNR
  .. more data .the customer...
  
  PD_LINKCLIENTCOMPOSITION
  COMPOSITION_ID
  CLIENT_ID
  LEVEL_ID
  
  PD_COMPOSITIONLEVEL
  LEVEL_ID
  LEVEL
  S_TYPE
  
  PD_LINKCLIENTDECISION
  DECISION_ID
  DATE_DECISION
  CLIENT_ID
  
  
  Some info with these tables
  There are the customers
  Customers have a composition one or several compositions have levels and these compositionlevels have different types
  For customers, the decisions are made on a certain date. Sometimes it is possible to have more than one decision of a customer.
  
  (the actual database is much larger than that, but I left out that we don't need to my question)
  
  I need is:_
  ALL customers, who have a composition with the leveltype "IGO", as well as the date of their most recent decision between 2 dates given. (if they do not have a decision yet, I do not need them in the results)
  
  I wrote this query:

  SELECT PD_CLIENT.CLIENT_ID, TO_CHAR(PD_LINKCLIENTDECISION.DATE_DECISION, 'DD-MM-YYYY') DATE_DECISION 
  FROM PD_CLIENT , PD_LINKCLIENTCOMPOSITION , PD_COMPOSITIONLEVEL, PD_LINKCLIENTDECISION 
  WHERE PD_CLIENT.CLIENT_ID = PD_LINKCLIENTCOMPOSITION.CLIENT_ID 
  AND PD_LINKCLIENTCOMPOSITION.COMPOSITION_ID = PD_COMPOSITIONLEVEL.NIVEAU_ID 
  AND PD_CLIENT.CLIENT_ID = PD_LINKCLIENTDECISION.CLIENT_ID
  AND PD_COMPOSITIONLEVEL.S_TYPE = 'IGO' 
  AND PD_LINKCLIENTDECISION.DATE_DECISION >= TO_DATE('01-01-2011', 'DD-MM-YYYY') 
  AND PD_LINKCLIENTDECISION.DATE_DECISION <= TO_DATE('31-12-2011', 'DD-MM-YYYY') 
  ORDER BY PD_CLIENT.RNR ASC

  This ALMOST gives me what I need. now it gives me the client_id, gives with ALL dates of decision between 2 dates. I only need the newest one. Can someone help me change that? It is probably something small. I thought I knew how to solve, but I continue to not now, I have not any more close to the result with this query :)
  
  Published by: 901981 on 16-dec-2011 05:46

  How about some analytics?
  Try something like:

  not tested

  select client_id
  ,      date_decision
  from (
        SELECT PD_CLIENT.CLIENT_ID,
               TO_CHAR(PD_LINKCLIENTDECISION.DATE_DECISION, 'DD-MM-YYYY') DATE_DECISION,
               row_number() over (partition by PD_CLIENT.CLIENT_ID order by PD_LINKCLIENTDECISION.DATE_DECISION desc ) rn
          FROM PD_CLIENT,
               PD_LINKCLIENTCOMPOSITION,
               PD_COMPOSITIONLEVEL,
               PD_LINKCLIENTDECISION
         WHERE PD_CLIENT.CLIENT_ID = PD_LINKCLIENTCOMPOSITION.CLIENT_ID
           AND PD_LINKCLIENTCOMPOSITION.COMPOSITION_ID =
               PD_COMPOSITIONLEVEL.NIVEAU_ID
           AND PD_CLIENT.CLIENT_ID = PD_LINKCLIENTDECISION.CLIENT_ID
           AND PD_COMPOSITIONLEVEL.S_TYPE = 'IGO'
           AND PD_LINKCLIENTDECISION.DATE_DECISION >= TO_DATE('01-01-2011', 'DD-MM-YYYY')
           AND PD_LINKCLIENTDECISION.DATE_DECISION <= TO_DATE('31-12-2011', 'DD-MM-YYYY')
        )
  where rn=1;  
  

• Equium A110-252: I can not all channels with V-GEAR MobiDTV

  Hello.

  I have Toshiba Equium A110-252 and I just bought the MobiDTV of V - GEAR, but I'm not all channels. Do
  do anyone know if this phone has good software/hardware that is necessary.
  Hope someone can answer this for me.

  Thank you

  Hello

  This is not a Toshiba device and in this case the best way is to contact the manufacture of the device.
  In your case, I recommend to visit this site:
  http://vgear.com/products/list.asp?ProdID=AMVG1-016-002

  However, I guess this tuner should receive digital signals.
  I put t know where you live, but to my knowledge the digital TV is not available everywhere. Digital signals must be strong enough to receive television channels.

• (Mem.usage.Average & Mem.Active.Average meter with get-stats

  I try to put together a weekly statistics using get-Stats... his works all well but if I use Mem.usage.Average, I have the memory percentage. using mem.active.average would give me the use of memory in KB, I understand.

  However, I get an entry using mem.active.average null.

  On the study, I noticed through the chart options to real a meter (attached document) only the section of memory in time performance?

  The mem.active counter can be added to the other section? or y at - it a config I need to do?

  See you soon

  The metrics are collected for different intervals depend on what you are configuring in

  .

  In this form, you will see the 4 historical intervals and for each, there is a "level of statistics" (being the metric 4, 1 being the least metric).

  You can check what you have there?

  If the level is 1 for all the intervals that could be the reason why you can not get the mem.active meter.

  Note the data in real time, see you in the VI Client comes from the real time hard coded interval (20 seconds) which is collected on the ESX servers themselves and is kept only for a limited period of time.

• Problem with Flash Chart, Ghost 0 appear and does not not all data

  Hey guys - I'm trying to generate a graph in the APEX that shows the number of incidents per hour of the day. Currently, I am working with a table that are all of the varchar2 fields - I:
  RM1_TIME (time i.e. the time of day in the army: 0000, 0530, etc.)
  rm1_agency which shows the responsible agency to take care of the incident and an area in which the incident occurred. Basically I have a SQL statement that generates a count of the number of incidents in one day, in the first two digits of the time (for example 0330 would declare 03) - my data comes right back when I look at. However with the graph, it seems to constantly want to reprint the 0 in the table (time along the X axis you 00 and 0 then 01 and 0) I don't know where that comes from. Also, no matter how broad, I do this table, I can't it to appear more than #18, even if I set the width to 5000pixels.
  
  Here's my big SQL statement that generates the table:
  
  SELECT NULL AS link,
  SUBSTR (rm1_time, 1, 2) AS label,
  AMOUNT (zero) AS "00."
  SUM (one) as "01".
  SUM (two) AS '02. "
  SUM (three) as "03".
  SUM (four) AS "04."
  SUM (five) AS "05."
  SUM (6) BY '06. "
  SUM (seven) AS "07"
  SUM (eight) AS '08. "
  SUM (nine) AS '09. "
  SUM (ten) AS "10."
  SUM (eleven years) AS "11."
  SUM (twelve) AS "12."
  SUM (thirteen) AS "13."
  SUM (14) AS "14."
  SUM (15) AS "15."
  SUM (16 years) AS "16",.
  SUM (seventeen) AS "17."
  SUM (18 years old) AS "18."
  SUM (19) "19", AS
  SUM (20) LIKE "20."
  SUM (twenty-one) AS "21."
  SUM (twenty-two) AS "22."
  SUM (23) AS "23".
  FROM (SELECT rm1_time, CASE WHEN SUBSTR (rm1_time, 1, 2) = '00' THEN 1 ELSE END 0)
  zero,
  CASE WHEN SUBSTR (rm1_time, 1, 2) = '01' END ELSE 0 THEN 1.
  CASE WHEN SUBSTR (rm1_time, 1, 2) = '02' THEN 1 ELSE 0 END two.
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '03' THEN 1
  three,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '04' THEN 1 ELSE END = 0
  four,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '05' THEN 1
  five,
  CASE WHEN SUBSTR (rm1_time, 1, 2) = '06' THEN 1 ELSE 0 END six,.
  CASE WHEN SUBSTR (rm1_time, 1, 2) '07' THEN 1 ELSE END = 0
  seven,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '08' THEN 1
  eight,
  CASE WHEN SUBSTR (rm1_time, 1, 2) = '09' THEN 1 ELSE END 0
  new,
  CASE WHEN SUBSTR (rm1_time, 1, 2) = '10' THEN 1 ELSE 0 END ten,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '11' THEN 1
  Eleven years,
  CASE WHEN SUBSTR (rm1_time, 1, 2) = "12", 1 END ELSE 0
  twelve,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '13' THEN 1 ELSE END = 0
  Thirteen years,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '14' THEN 1
  Fourteen years,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '15' THEN 1 ELSE END = 0
  fifteen years,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '16' THEN 1
  Sixteen,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '17' THEN 1 ELSE END = 0
  Seventeen years,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '18' THEN 1 ELSE END = 0
  eighteen,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '19' THEN 1
  Nineteen,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '20' THEN 1
  twenty years,
  CASE WHEN SUBSTR (rm1_time, 1, 2) END ELSE = 0 '21' THEN 1
  Twenty-one,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '22' THEN 1 ELSE END = 0
  Twenty-two,
  CASE WHEN SUBSTR (rm1_time, 1, 2) '23' THEN 1 ELSE END = 0
  Make
  MYTABLE r1
  WHERE rm1_agency = '' IF. ''
  AND rm1_date = TO_CHAR (TRUNC (SYSDATE - 1), "fxyyyymmdd")
  AND SUBSTR (rm1_district, 1, 1) = '2')
  Group of SUBSTR (rm1_time, 1, 2)
  order of SUBSTR (rm1_time, 1, 2)
  
  all columns, I am struck are varchar2. Please let me know what other information I can provide... Thank you.

  Hello

  Take a look at the maximum lines on the graph (look in Flash graphic attributes - series) and growing.

  Kind regards
  Dimitri
  ----------------------------------
  http://dgielis.blogspot.com/
  http://www.sumneva.com/

• By selecting a tag is not all images with this tag

  PSE 13 with all updates running on Windows 10.

  When I click on a label under the component "Tags" I see only a subset of the images that contain that tag.

  For example, I have a label of "Pat". When I click this tag with 'All media' active I get 81 results.

  If I do a Find/By details (metadata), and then select "Key words", search for "Pat" tag, then search I get 828 results. The result of 828 seems accurate.

  No idea why my component Tags search returns a different result?

  I tried:

  1 restart the application.

  2. restart Windows.

  3 file/manage catalogues/repair (no problem found).

  4. the full backup of the catalog (no problem).

  5. file/save metadata to files

  I make heavy use of tags. I use the tags pane search all the time.

  Never really had any problems.

  I have 23 725 articles in the catalogue.

  There was an Adobe update this morning. Don't know what app has been updated.

  Thanks for any help.

  If the update went normally without error, don't worry about this.

  The reason you get different results with two types of search is more likely because of the hierarchy of tags and the fact that you can assign the same word in different subcategories or one more tag.

  If you select by a check box on a tag in the Panel tags, you get only the items in the sub category. If you use the search in detail or in text, you will also find the same tag in other categories. On the current situation is when you have imported the files and you're left with the real tag and the other in the "imported" tags

  For example, I have a subcategory 'Flowers and gardens' tagged 'flowers '. I also have a tag 'Flowers' in another category for a special place. The number of found items depends on the search mode. If you use the search by text (top right), you will see different results and this will give you an idea of the differences.

  It is not a good idea to assign the same tag in different categories, but I'm willing to bet there will be a lot of complaints if the software prevented this bad practice.

• Rows from the outer Table shows only not all data.

  Hello
  
  I have a line to 80 characters that I import in an external table.
  
  80% imports fine line data, but some lines are cut.
  
  The bytes in the file are as follows.
  ABCABC2334 0000001000010000001000000001 000000 00001C A002
  
  Bytes in an external table.
  ABCABC2334 0000001000010000001000000001 000000 A002
  
  The bytes in the row of the outer table stop somewhere at the end of 000000 and the 00001C is cut.
  
  What build be the cause of this?
  
  I am able to read the characters at the beginning and towards the end of the record of 80-character line.
  
  The external file below performs the following operations.
  ABCABC2334 0000001000010000001000000001 000000 01B A002
  
  I can even make a definition of the external table (c1 char (1), c2 char (1),... c80 (1) tank and all the characters see fine in the specified columns.)
  
  Here is the last definition of the external table. The "middle" column still shows this behavior. Basically, it is in the file and can be seen with every character in the definined line, but not as a group of characters.
  
  DB CHARACTERSET WEBISO8859P1
  
  CREATE TABLE EXT_PROJ_1
  (
  Field1 tank (6 BYTES),
  Field2 float (4 BYTES),
  medium (67 BYTES)
  field3 tank (3 bytes),
  CR tank (2 bytes)
  )
  EXTERNAL ORGANIZATION
  (TYPE ORACLE_LOADER
  THE DEFAULT DIRECTORY EXP_DIR
  ACCESS SETTINGS
  (
  RECORDS delimited by '\r\n '.
  FIELDS (field1, position(1:6),
  position(7:10) Field2.
  average position(11:77)
  field3 position(78:80).
  CR position(81:82)
  )
  )
  LOCATION (EXP_DIR: 'ext_proj_1.txt')
  )
  REJECT THE LIMIT 1
  noPARALLEL
  NOMONITORING;
  
  Published by: 917320 on March 13, 2012 09:07

  Looking at your table definition:

  field1 char(6 BYTE),
  field2 char(4 BYTE),
  middle char(67 BYTE),
  field3 char(3 byte),
  cr char(2 byte)
  

  column in which you will store a string of 80 bytes?

  BTW: You said "import into an external table." You import FROM an external table or EXPORT to an external table?

• The printer receives do not all data. It is caused by the MAC address filtering.

  How can I solve this problem.

  The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

  HP Officejet 4500 - G510n wireless all-in-one printer

  Not at all use MAC filtering.  Make sure it is off in your router.

• Oracle community ideas - displays only not all data.

  Hello

  Why I am not able to see all the entries in the Oracle community ideas forum? But I get emails about updates.

  Manu.

  Hello Manu,

  We are currently being attacked by spammers through ideas. So we were turning off ideas from time to time. They are back on now.  You probably won't see a permanent solution until next week.

  Monique