VM XP with a SCSI hard disk two

Similar Questions

• Computer does not start with connected external HARD disk

  Although my BIOS doesn't look like another hard drive, when I start my computer with the external hard drive, the main computer shuts down until I have disable externally. I want to have external to back up automatically but can not have both to play well.

  Help!

  Hello

  The same thing happened on my laptop with a connected external printer.
  I was not able to turn on the laptop until I unplugged the USB printer.

  Well, I checked the BIOS which controls the start and put the HARD internal disk to the first position!
  Try this. Maybe it helps. Otherwise you will need to disconnect the external USB HDD til the operating system has started

• To replace the DVD drive with the second HARD disk on the pavilion DM4-2000

  Hello

  I would like to remove my laptop DVD drive and replace it with an SSD. It seems that the DVD player does not use the standard format of pins SATA for hard drives, rather than use a slightly smaller connection. Is it possible to connect a laptop SATA drive this in any case and if so, how?

  Any help appreciated,

  Tim

  You need a car adapter. Your laptop uses 12.7 mm optical readers and you need this card:

  https://www.jacobsparts.com/items/HDDBAY-01/

  Here is the Service Manual:

  Manual

  See Page 45 for replacement instructions.

  You place the additional hard drive inside the adapter, then swap the front to make look it good.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Move all files with the file hard, in two data warehouses

  You can move these files from the data through VC or WinSCP3 store? You have on the eve of vm? There is that one disc and files are on two separate data stores.

  Please move configuration files to the same data as the vmdk files store to ensure an appropriate server recovery. I ran a backup because it is now, but in this State, I can't assure you that I will be able to recover properly. ProdVMLUN1A3/CO01 (configuration files) ProdVMLUN4A22/CO01 (vmdk files)

  Thank you

  D

  If you're on ESX 3.0, you can do a few things.  We could be to stop the virtual machine in question, and then choose migrate.  In the wizard you will be asked if you want to 'keep' or 'move', choose move.  Another way would be to use VMware Converter

  If you ran 2.5 and ESX 3.5 vCenter, you could do it live with sVmotion.

• Qosmio X 70-B-10 t does support SSD or HARD disk?

  Hello

  my name is Christian.
  I'm going to buy a new laptop and I decide for the new Qosmio X 70-B-10 t (game).

  I have a question: I don't understand if the laptop is equipped with a single HARD disk or an SSD.
  Then, I would like to know if there is a single hard drive (HHD or SSD) or two (for example a HARD disk and a SSD).

  Thanks for the answers and sorry for my English!

  See you soon
  Christian

  Hello

  The Qosmio X 70-B-10 t was equipped with a 2.5 SATA 1 TB drive HYBRID SSHD (8 GB SSD flash memory).

  Hybrid disk HARD is a mixture of HDD and SSD drive part is the hard drive and another part (in this case 8 GB) is a flash memory.

• Can satellite A100-847 - I replace my current HARD drive with a SATA2 HARD drive?

  Hello

  I am currently using a Satellite A100-847 with a 100 GB SATA 5400 RPM HARD drive. I plan to change with a Western Digital WD2500BEKT 250 GB SATA2 16 MB 2.5 inch laptop hard drive 7200 TRM. Is it possible to replace my current HARD drive which is SATA with a one SATA2?

  And if not what is my best option upgrade of the mine to a HARD fast (7200 RPM) disc?

  Hello!

  Yes, you can replace the current drive with a SATA2 HARD disk. You already have a SATA interface, and this means that you can use each HDD with SATA interface.

  I don't know Mr. but as far as I know the Satellite A100 cannot use the speed of SATA1. This means that the new HARD drive maybe won't work with SATA1 speed but there is no significant difference in performance.

  A HARD drive with 7200 RPM is really fast, but don t forget it produces more heat and needs more electric battery. A HARD disk at 5400 RPM is perhaps fast enough for you?

  Good bye

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• Laptop computer with two hard disk slots

  One of the portable series Envy 17 current have two hard disk slots?  I currently have a Pavilion DV8 that has this and I really like it.

  Yes, they do the end superior versions have a disk in it and basic editions have the empty Bay
  The new 2015 envy 17 t

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Look at one of these two hard disks in Windows

  Hi guys

  Sam X 200 m/n: PSPBUA-00N007 running a Vista Ultimate operating system.

  I wanted to see if I can get Windows to recognize the two hard drives as a single. I tried to change the 2nd HARD disk to a dynamic and extending of the primary HARD drive, but it doesn't seem to work.

  Can I do this in Windows? Or is the OEM Toshiba which prevents me from doing this?

  Any suggestion would be fantastic.

  Thank you very much

  Hello

  what you would have is a RAID stripe both of your HDD´s. But is there a RAID controller installed in this machine? I Don t think so and even if yes, then you need to reinstall your operating system, but you must first create a RAID 0 stripe.

  Because the machine (as I know) is not equipped with a RAID controller, then a regular SATA controller you will have no chance.

  Welcome them

• Why the hard disk is divided into partitions of two data (C:Vista and E: Data)?

  I just started a new A200-1V0 and found that disk space is divided into two partitions of sizes equal 'C:Vista' and ' E: Data "(and a small one EISA).

  WHY? What is the logic and purpose? It's not even as if the C:Vista partition is smaller and intended only to the tricks of the 'system' as the root 'Users' (user Documents) is on it also.

  This is the default for Vista (my first use of it), if not, who said that Toshiba could do this without asking me?

  How can I move the root 'Users' in Vista (in the data partition) - if I have two partitions that I might as well use it?

  I can resize partitions in Vista without a utility 3 rd-party (or a complete backup/restore)?

  Thank you

  Hello just YOU

  Please don't be offended because there is no reason for this. You bought the new product with the factory settings. Toshiba and other hardware manufacturer do not know every customer personally and, unfortunately, it was not possible to ask YOU how to set up YOUR laptop.

  Because of this, there is a recovery of product support that allows to configure the HARD disk according to your wishes and needs.

  Please use this DVD and install OS how you want it to be. What recovery procedure starts, you will see CONFIGURATION option on the right side. Click on it and choose the right option.

  Reinstall the OS and enjoy your life. Really, I don't have the time to write on the floors of two partitions, because this is basic stuff and you probably don't want to waste your time to read this.

  Bye and good luck!

• Satellite A300 - how to use two hard disks?

  My Satellite A300 came with two 200 GB hard drives (drives C and D). What is the best way to use the D drive? Now I have nothing about it. If drive C fills the computer automatically switches the D drive?

  A basic question, I know, but the manual provides no information on this subject.

  Hey Dearborn,

  > If drive C fills the computer automatically switches the D drive?
  No, D: drive will not be filled automatically.
  When installing the program, you will be asked which drive they will be installed. So you can choose between C: and D: drive.

  In general there are no rules the use of two hard disks. You can do what you want.
  In my opinion the best is if you install all the programs on C: drive (first HARD drive) and save your private files such as photos, videos, documents, etc. on drive D: (second HARD drive). Its advantage is that if you need to reinstall Windows at all times, these files on the second HARD drive will not be deleted. ;)

• Configure a raid with a single HDD on board more than 2 external HARD disk.

  Hello

  I run Win8 Pro 64 bit with Media Center, updated Win 7 Media Library on a 27-1007ev HP all in one desktop pc with a 500 MB HARD drive inside.

  I have 2 external hard drives - one is 1.5 TB used to store data such as pictures and videos etc. NAWL, the other is a 2 TB used as a backup device.

  I want to set up a Raid mirror on the PC's HARD disk to one of the sources, without having to do a reinstall if possible.

  I appreciate the external ability could be underutilized unless I upped the HARD internal disk capacity to match.

  Any advice warmly welcomed.

  Rob

  Hello

  The motherboard in your PC's bios for RAID support.  In addition, there are only two ports SATA; one for the HD and the other for the CD/DVD drive.

  You can use a function of storage W8.  Check out this video W8 storage space.  You cannot use the current drive although I got it to work a long time ago, but have not tried to do recently.

  Another possibility would be to try a software RAID using only two USB external drives. Other possible combinations, but none are going to be as robust as using the bios RAID supported feature.

• Installation of Windows 7 spans two completely separte not partitioned hard disk. How moving to a disk?

  I have two separate completely from the hard drive. It is 288 GB and the other news is 1 TB.  When I installed Windows 7 Ultimate, for some reason any, it has partially installed on both drives at the same time.  I tried to reformat the hard drive of 288 GB, but can only a part of the Windows installation on this disk! How can question, I put it completely on a hard drive in Windows 7?  I know what is happening, because when I unplug a hdd, leaving a connected, it does not start upward because he needs a startup disc.  Other, similarly, said that the part of the windows installation is not available because there was a change of hard disk.  So, how I move everything that is on one of the disks to consolidate in the first hard drive?

  I unplug the 1 TB hard drive, then try to install the disk of 288 GB. Then you can attach the 1 TB of disk after installation.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Two cables USB to s external HARD disk.

  There are two USB cables to s external HARD disk, what is the porpose of this while the cable with the largest cord can transfer data?
  Does this affect the speed of transfer rate?

  It is similar to this? http://www.toshibadirect.com/TD/B2C/Adet.to?poid=438342

  Quoted by top link explaining the purpose:

  «The USB cable to provide the extra power that you need for your external hard drive or other USB device when a standard USB cable is not able to transfer enough energy to operate your camera.» Simply plug in your USB device mini-B cable and both ends of the USB A open USB ports on your PC or Mac. The cable is powered from two USB ports and increases the output to the external hard drive or USB key. »