VMotion for one HA cluster to another - no shared storage

Similar Questions

• VMotion of a HA cluster to another cluster without storage shared

  I was trying to vmotion that two hosts and clusters of data from a virtual computer store between HA (no shared storage). Web client gives me this warning, but the migration is successful.

  The warning message is:

  If this is done, the virtual machine will lose vSphere HA protection. If you proceed with this operation and it completes successfully, vSphere HA not will try to restart the virtual machine after a subsequent failure. vSphere HA protection is restored when network partitions or disk accessibility problems are solved.

  Is this a problem?

  given that your VM left cluster HA, warning to inform you that VM is not going to be protected by HA.

  If your target cluster where you moved your VM is also active HA then he will protect even by HA in this cluster.

  In short, this warning is more to inform you that your VM leaves HA protection. as long as you know what you do, no problems.

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.

• What is the best way to copy vm of one Esx to another without shared storage - San for example

  Hello

  I'm trying to copy a virtual machine from one Esx to another Esx on the network.   We do not have shared as a SAN storage.  The problem is that I do not know Linux command, so I tried to copy comments vm using Winscp.  The problem is Winscp did something to the file flat vmdk by adding an extension, and I can't change this extension with Winscp.  I'm doing something wrong.

  Thanks in advance for any help.

  What about VMware Converter?

• Photoshop at$ 9.99 CC is valid for one pc... or I can run on the same account?

  Photoshop at$ 9.99 CC is valid for one pc... or I can run on the same account?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• How to migrate a VM from one cluster to another cluster using PowerCLI

  When I run the command

  Move-VM -VM $vm -Destination $ResourcePool -Confirm:$false

  I am getting following error

  Move-VM : 19.7.2011 15:32:07    Move-VM        Destination is a Resource Pool owned by a Cluster, but the VM you are trying to move is not in that Cluster. Please select for destination a Host 
  in that Cluster or a Resource Pool owned by a stanalone Host.    
  At line:1 char:8
  + Move-VM <<<<  -VM $vm -Destination $ResourcePool -Confirm:$false
      + CategoryInfo          : InvalidArgument: (Flis:ResourcePoolImpl) [Move-VM], VimException
      + FullyQualifiedErrorId : Client20_VmHostServiceImpl_MoveVm_ResourcePoolOwnedByCluster,VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm trying to migrate VMS from one cluster to another cluster.

  I can perform this migration of vsphere, but not through powercli.

  Best regards

  The first shot must also have a data store setting.

  Move-VM -VM $vm -Destination $NewHost -Datastore $ds -Confirm:$falseMove-VM -VM $vm -Destination $ResourcePool -Confirm:$false
  

  Unless your data warehouses are shared between the 2 groups and you intend to keep these warehouses of data with the new cluster.

• Move the host from one cluster to another?

  I have two clusters and I need to move a host from one cluster to another. How can I do this and ask the host to connect to the new cluster instead of LUN LUN the host is connected to?

  Thank you!

  to move the host, you can disconnect and then delete.  Once it is deleted, you can 'add host' in the new cluster.  If you have guests running, you should have your SAN team present the LUNS presented to the new cluster for your ESX host, from the other group.  Then, you can use sVMotion to migrate directly from your virtual machine to the new LUN.

  Once it is completed has your team the 'old' not present SAN LUN and do a new analysis of your storage adapters.

• Here is a list of the driver updates that do not install for one reason or another: Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller your driver is out of date.

  Here is a list of the driver updates that do not install for one reason or another:

  Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller

  Your driver is out of date.

  The installed driver date 30/05/2012

  New driver Date 18/09/2012

  After the next driver update > the following message appears:

  This driver downloaded successfully.

  You want to install it now?

  Yes. Then was the following result:

  Please update your Windows update Agent version.

  You can download the latest version by clicking here.

  If the Microsoft FixIt solution above does not solve your problem.

  Check on the Intel site.

  For example: http://www.intel.com/p/en_US/support/detect

• Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  You can purchase the license but on different emails if you need to use them on multiple computers. From an e-mail, you can install software on both computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  Kind regards

  Hervé Khare

• MAC OS Yosemite - CS6 - earlier, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's all

  -At the time, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's a window without having to be full screen mode? I managed to go a few times like this, but right now it's really annoying me. Help!

  

  Just drag the small window up just under the toolbar, you will see the area highlighted, and when you drop the file should anchor.

• Should we the DRS and VMotion for tolerance fault? Small cluster host 3

  Hello

  I'm slightly confused on some information coming from two different directions. We are in the stages of buying a package of Vsphere Essentials Plus and intend to build a 3 host with shared storage cluster. VSphere essentials plus the package comes with HA which, from my understanding, fail over automatically and restart the virtual machine on the available server. In case of server failure Vmotion or DRS provides something more than HA.

  We are told that VMOTION & DRS moves virtual machine of FAILURE to an available server without restarting the virtual machine. I don't know how that's possible, but I wanted to check first with the community.

  VSPHERE 4 ESSENTIALS PLUS seems ideal for small host deployments 3 @ $2 600 however, that same lic. for the regular VSPHERE enterprise is $2 800 per CPU that @ 6CPUS is more than $17 K.  Then why should we spend $17 K for business verus a $2 600 essentials more lic for such a small deployment?

  Thank you

  CA

  Yes, this is a new feature. http://www.VMware.com/products/fault-tolerance/

  It may work on the existing links, but it is recommended to have dedicated interface for FT.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Migrate virtual machines from HP G7(single host) for HP G8 (Cluster) without shared storage

  Hello

  I have 2 esxi host (hp dl 380 G8) and put them in a cluster and other host esxi (dl 380 g7) and I have no shared storage and use local disks just now I must spend my VM G7 server a cluster of the G8 but I want to know I can join my cluster g8 g7 and migrate web vmware machines without any downtime?

  I want to know can migrate without downtime with localdisk? I have no shared storage

  Best regards

  BAbak

  can I join g7 to my cluster of the g8

  You can mix into clusters hosts all desired, even Intel and AMD at least that you enable EVC on the cluster (of course, HA or DRS require shared storage compatible/CPU). However, you need not to have even just cluster hosts to migrate virtual machines through vMotion between them.

  migrate web vmware machines without any downtime?

  Don't know what this "web vmware' but yes, because ESXi 5.1, you can use"enhanced vMotion"to live migrate virtual machines without service interruption from one host to another, even without shared storage:

  Migration with vMotion in environments without shared storage

  The usual vMotion requirements apply. Also you can only live migrate virtual machines from the old host to the new hosts because of different generations of CPU (and back as long as you don't have bike powered virtual machines on new hosts).

• How better to import everything from WaveBurner a reader to one empty WaveBurner on another drive?

  I have a large amount of CD I put together in WaveBurner on an internal drive which is full. I know there is an import button to import audio files.

  But I want not just audio files, but all projects, so I can still work on them.

  How better to import everything from WaveBurner a reader to one empty WaveBurner on another drive?

  I thank very you much for your time and patience.

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.

• How better to transfer files to one external drive to another

  How to transfer files from one external drive to another?

  You can drag individual; or just select and drag as a group by holding down the Option key for you key keep on #1 Drive until you are sure that they all copied over correctly to Drive #2...  Or you can select all/copy/paste.    Do not erase the files from the first drive until you are certain that they all copied properly.