vMotion works only in a switch and the management

Similar Questions

• vMotion works between HP DL380 G7 and the Gen9

  Hi all

  VMotion I would like to know how working with HP DL380 G7 HP DL380 Gen9?

  Can someone help me?

  vMotion between this two servers:

  HP DL380 G7:

  Intel Xeon E5649

  Embedded NIC 4x1GbE

  + NC364T PCI Express Gigabit QuadPort

  HP DL380 Gen9:

  Intel Xeon E5-2650v3

  Embedded NIC 4x1GbE

  + 10 GB 2-port 10GBASE-T 533FLR-t HP FlexFabric

  Can someone help me?

  I would be very grateful
  

  Ralf
  

  The G7 has a CPU of generation Westmere, the Gen9 has a generation of Haswell CPU.

  vMotion requires that you have the same subset of games of CPU instructions and common on the source and destination of the CPU and active features in the server BIOS.

  This means that in your case:

  You will be able to vMotion virtual machine that has been powered on the host of the G7 (VM runs with Westmere instructions) for the Gen9 and so (but only if you don't re - power cycled the VM on the host G9).

  But you will not be able to vMotion virtual machine that has been powered - we on the Gen9 host (VM runs with Haswell instructions) to the host of the G7 most old car is missing these more recent CPU instruction sets.

  VCA comes here. By activating EVC on the common cluster with the generation of CPU down (in your case Westmere), all guests will present only these instruction sets to virtual machines when they are powered - on, which makes possible dynamic migration through the different physical CPU generations.

  See the following articles for more information about CVS:

  VMware KB: Enhanced vMotion compatibility (EVC) support processor

  VMware KB: EVC and CPU compatibility FAQ

  Alternatively you could manually hide CPU instructions by VM - with advanced options if you don't have a source host and destination in the same cluster, but it is a tedious task and I would not recommend it.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I work on a Mac computer

  Hi Tania,.

  He could be induced to Mac username and password.

  Kind regards

  Sheena

• How to configure WebLogic Admin Server and the managed server

  Hello
  
  I work to configure a Weblogic admin and the managed server, but fail.
  Can I know the correct steps for the installation system?
  
  
  TX.

  Good. It might be a good idea to mark this question as answered, then.

• The only link scaner that works is WOT's AVG and the rest of them?

  When I used to navigate, McAfee, AVG, Avast, Norton to determine if a web site is secure or not. Now, it seems that WOT is the only scanner link that works. Can anyone explain why?

  It's complicated. To download these items, the only way is to download the programs together and try to follow the directions after that. These versions of quick release are the problem. Thanks for your help. Iman

• Thunderbird does not work after installing Win 10 and the mobile profile of Win 7

  I've installed Tbird 38.3.0 on a new Dell computer with Windows 10 on this (8 GB of RAM, 1 TB harddrive). I then followed these steps to put my old profile from the old computer to Windows 7:
  1. copied my profile on the Windows 7 computer on an external drive.
  2 installed Tbird on the new computer Windows 10 38.3.0, but has nothing to do with it.
  3. following the instructions on the site of Thunderbird on the displacement of a profile:

    a) Use the Profile Manager to create a new profile on the Win 10 computer.
    b) Copy the profile from the external drive to the new profile folder
    c) Use Profile Manger to tell Tbird to open the new profile
  

  4. start Tbird.

  I see my files with email in them, but there are problems:
  1. None of the Tbird dialog boxes open when I choose a command in the menu bar (including the new Message).
  2. I can't get Tbird to display the contents of a folder in the Home tab. There is only the accounts and the advanced features of the Inbox, display in the right pane, next to the folder tree. The only way to see the contents of a folder is right-click and choose open in a new tab.
  3. when I click or double-click on a folder, the contents of the file does not replace the previous folder. TBird on the Windows 7 computer, clicking a folder displays the contents of the new folder.
  4. sometimes when I Alt + Tab of Tbird, then Alt + Tab, moving the cursor of the mouse on the messages in the Inbox tab causes the message object, Date,... to disappear, leaving blank lines.

  I tried to uninstall Tbird and reinstall it, but this does not solve the problem.
  I tried to reboot Windows 10 but that does not solve the problem.
  I don't seem to be able to download email and preview in the messages pane, but I can't open it in a separate window.

  A lot of people seems to be able to run Tbird on Win10, so it should work. Any ideas on why it does not work and what I can do about it?

  Thank you very much in advance!

  go to add-ons.
  remove the addon of lightning.
  restart - everything should be good.
  If you still need the addon of lightning, install it again - it should give you a new version.

  Please tell us that all is well

• Why the fast user switching and the new Windows Search use the Terminal Services?

  Recently, I was struck by a piece of really bad, malicious malware that totally trashed my operating system.  Therefore, as I rebuild my system, I am applying the appropriate safety precautions.  Among the recommendations of Microsoft is to reduce your footprint of security by disabling unnecessary services.  One of these services that I thought I didn't need was Terminal Server services, since it is a way for a person to get to my machine remotely.

  It turns out that, however, other services that I want to use, such as Fast user Switching and window new search utility, depend on the Terminal Server Services.  It makes no sense to me from a safety point of view.  This seems to be a bad design decision, because security trumps utility.

  If Microsoft is listening, I would like to know why you made this decision and you have changed in Windows 7?

  Second, is there a way to always have the Terminal services Server running and at the same time cut access remotely through this service?

  I don't know about the 'new' Windows Search, but what about the fast user switching you ask to run several sessions of Windows when you switch between users (a session for each user connected) and the only way that Windows can do is to act as a quasi Terminal Server, it needs Terminal Server services to run multiple sessions.

  John

• Microphone works only with Windows 7 and StarCraft 2

  I have Windows 7 64 bit is installed on a computer HP Pavilion Elite (HP-M9600T), and I'm having problems to make my microphone to work with Windows 7 and Starcraft 2 (SC2).  The strange part is that I have an old analog microphone that works, but it's quality is very bad.  I bought 3 or 4 new microphones (some analog other USB) and none of them have worked.  I tried standalone and headset microphones.

  Whenever I tried a new micro, I went in the 'Sound' Panel and check that the microphone is not muted.  I check that the microphone level is high (and if mic boost is available I assure me that it is also at the top).  Then I test the microphone via the 'Listen to this device' feature in the properties of Microphone Panel and can hear my voice through my speakers when I talk.  I also see the green bar on the acoustic Panel fluctuate everytime I speak.  However, no one can hear me when I play StarCraft 2 unless I unplug the new microphone and plug the old microphone.  StartCraft 2 settings are configured to use the default device and StarCraft 2 also has a test feature of "Listen to this device" and I can hear my voice through the speakers.  Just like in the sound Panel, when I speak I can see the Soundbar of StarCraft 2 fluctuate in recognition of my voice.  However, only the old work of mic.  If my old microphone had a mute and better quality, I would ignore the problem.  However, this is not so I would get a new mic work.

  All the drivers seem to be up-to-date and indicate that they are working correctly.  I uninstalled and reinstalled StarCraft 2.  I also reinstalled Windows 7.  I used two generic drivers and installed the drivers RealTek supplied with my machine.  The two sets of drivers give me the same result.  I thought they might be in conflict, so I uninstalled the RealTek drivers, but I got the same result.  Teh generic drivers recognize my mic fine, but no one can hear me.  Any ideas?

  

  Hi tlonni,

  You can try the following steps and check if it helps to solve the problem.

  a. Click Start, click Control Panel and then double-click sounds.

  b. in the sound dialog box, click the recording tab, click on the microphone and then click Properties.

  c. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• vMotion works only one direction

  I have two Dell PowerEdge R710 servers identical running build 175625 vsphere with vCenter Server 4 supports. When I initiate a vMotion (or when the DRS initiates a vMotion) box of 2 up to 1 box, everything is fine. However, since last week some time, I cannot vMotion area 2 area 3. I get the following error:

  A system error occurred: Migration failed when copying data. Not supported

  Every thing is up-to-date as well on the hardware and software. Networking and vMotion config are identical between the hosts. It worked for about a week before the break, for a reason that I could not identify. Pointers would be useful.

  Most question sthat cause this type of problem are issues of networking - confirm the IP addresses on both ports of vmkernel vmotion as well as all of the network settings. You can vmkping between the two hosts?

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Why Windows high contrast doesn't work anymore since Firefox 29 and the theme of the Australia?

  In firefox, 28 and all versions before that when I had Windows High Contrast active firefox would also be in high contrast. This would make black Web pages and all the text would become white. Because of my disability which makes it much easier for me to see and walk through it. Since firefox 29 and the introduction of the Australia theme but it seems like a high contrast in windows is no longer supported by firefox. That's why I went down to firefox 28 in order to be able to navigate as I used to.

  There is a hidden value that needs to be modified in two places:

  Go to Options > content > fonts look and colours, click on 'Advanced' > uncheck allow sites to choose the fonts and colors
  AND
  Click on ok and the color... on the content page > uncheck the allow pages choose own colors other than above. Make sure that the background is black and white choice policies.

  Under windows if you have high contrast mode, please also try "use system colors".

• Webcam works only with Windows 7 after the computer has been cleaned.

  original title: Webcams

  I had to get my computer cleaned. After it was cleaned the windows installed person 7. I used Vista. I have a webcam built into my computer. I used to be able to use it to take photos and videos. Now, I can't. When I search for the webcam all I can find general information about it and its properties. Anyone know how I can get my webcam back up the way I used too?

  Hello

  Each manufacturer of system or camera maker provides their own software to control the camera so
  You should check with their support, their books online and ask in their forums (if any).

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

• my sound jumps and comes in and out in a game, but works very well for music and the moveis and things like that it's just the fact that in games

  sound

  Hello

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Page scrolling works only when I click on the page. Was I forgetting something?

  I'm almost ready to create my first site, but when I saw of any page it scrolls through only when I click on the page or the scroll bar. Not neglected a setting for this?

  Hi Johannes,

  Please refer to: Parallax scrolling in Adobe Muse CC Web sites | Adobe inspire Magazine

  Kind regards

  Akshay