vMotion works only one direction

Similar Questions

• HotSync only works in one direction

  I recently moved from a PC running XP for an Imac OSX 10.5.

  I have a Tungsten E and install Palm Desktop 4.2.1 installed on Imac, open when the connection active.

  HotSync seems to work well, with no error message in the log, but looking at the result, sync'ing of the calendar is only went in one direction. A new entry in my handheld was transferred to the Imac, but a new entry on the Imac did not appear on the handheld. This never happened with the PC, in that any new entry was Sync, regardless of where it was entered.

  Any suggestions to make it work in both directions are welcome! Thank you, Alfred

  I've got it-, I think.

  For some reason, my name (the only authorized user) not was not entered in the part of little 'user' on the bar - just a message "no user". Once I fixed that it works very well! I have no idea why it didn't recognize me from the start, but I tried to synchronize both ways since then, and it worked fine.

  Thank you guys for pointing me in the right direction - I had not advanced far enough in the manual to understand how to set up.

  Cheers, John

  Message relates to: Tungsten E

• VMotion migration works only one way...

  I have 2 hosts running ESX 4.0 I installed Vcenter and I use the VSphere GUI client to manage hosts.

  I am able to perform dynamic migration from one host to another, but not the reverse, and when I try to run the

  migration, I get the following error: "a general error has occurred: cannot create the log file supplied cannot open"/var/log/vmware/journal/1234xxxxxx.xx"to write" I don't think that it was due to lack of disk space.

  Can someone help me?

  Have you tried to connect to the console and check if it

  is the space on the host by using the command 'df '? It's the

  version ESX console I recommend you connect to the shell and

  perform a "tail-f/var/log/vmkernel" as he tried to emigrate in the

  a direction that does not work. I found that the error messages

  reported in vCenter don't always point you in the right place. You

  can get a little more information to facilitate your search, if it turns out not to make disk space.

• BBM BBM works only one-way

  Hello

  Since yesterday (2016-01-26) the following error portfolio:

  Messages sent from a BlackBerry device are received, but the messages that I send to a BlackBerry smartphone get only the check box, but no D or R marking.

  I use BBM on an Android phone, with the most recent version 2.11.0.18

  Try to solve the problem I did the following steps - but none of them changed something in the behaviour:

  . Restart of BBM

  . Restaring the phone

  . Reinstalling BBM

  . Try BBM on two other Android devices

  . Try to create a group - for this my invitation was received by the BlackBerry device, but cannot be accepted

  . You try to join a group - I received the invitation and I could accept it, but the group does not appear

  . Try a cat prlvate

  . Try another account

  The only thing that works is the exchange between two Android devices.

  Another curiosity: yesterday and today, that one message has send - only!

  I have some other ideas that I could try to solve the problem - did someone knows more? Is there a network BlackBerry problem?

  Today, I was able to exchange a few messages again, it seams to work again.

  Without changing anything.

• A PIX-to-PIX VPN can allow traffic in only one direction?

  Here is the configuration of the PIX 501 that accepts incoming VPN tunnels of the other PIX dynamic-ip.  Everything works very well, allowing traffic to flow both ways after that the tunnel rises.  But then I somehow limit or prevent the traffic that originates on the PIX (192.168.27.2) to go to other networks of PIX?  In other words, if a tunnel exists (192.168.3.0 to 192.168.27.0), I only want to allow network traffic to access the network 27.0 3.0, and I want to anyone on the network 27.0 access network 3.0.

  Thanks for any comments.

  pixfirewall # sh conf
  : Saved
  : Written by enable_15 at 13:29:50.396 UTC Saturday, July 3, 2010
  6.3 (4) version PIX
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the encrypted password
  encrypted passwd
  pixfirewall hostname
  .com domain name
  fixup protocol dns-maximum length 4096
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol they 389
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  access-list 101 permit ip 192.168.27.0 255.255.255.0 10.10.10.0 255.255.255.0
  access-list 102 permit ip 192.168.27.0 255.255.255.0 10.10.0.0 255.255.0.0
  access-list 102 permit ip 192.168.27.0 255.255.255.0 192.168.3.0 255.255.255.0
  access-list 102 permit ip 192.168.27.0 255.255.255.0 192.168.7.0 255.255.255.0
  pager lines 24
  ICMP deny everything outside
  Outside 1500 MTU
  Within 1500 MTU
  IP address outside xxx.xxx.xxx.248 255.255.255.255
  IP address inside 192.168.27.2 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP local pool ippool 10.10.10.1 - 10.10.10.254
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  NAT (inside) - 0 102 access list
  Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.1 1
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-server local LOCAL Protocol
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set esp - esp-md5-hmac gvnset
  Crypto-map dynamic dynmap 10 transform-set gvnset
  gvnmap 10 card crypto ipsec-isakmp dynamic dynmap
  gvnmap interface card crypto outside
  ISAKMP allows outside
  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0
  ISAKMP identity address
  ISAKMP keepalive 60
  ISAKMP nat-traversal 20
  part of pre authentication ISAKMP policy 9
  encryption of ISAKMP policy 9
  ISAKMP policy 9 md5 hash
  9 2 ISAKMP policy group
  ISAKMP policy 9 life 86400
  vpngroup address ippool pool gvnclient
  vpngroup dns 192.168.27.1 Server gvnclient
  vpngroup gvnclient wins server - 192.168.27.1
  vpngroup gvnclient by default-domain '.com'
  vpngroup split tunnel 101 gvnclient
  vpngroup idle 1800 gvnclient-time
  vpngroup password gvnclient *.
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 30
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 30
  management-access inside
  Console timeout 0
  Terminal width 80
  Cryptochecksum:
  pixfirewall #.

  Of course, without a doubt capable.

  You can configure the inside interface access list to deny traffic from 192.168.27.0/24 to 192.168.3.0/24, and then allow anything else.

  Example:

  access list for the Interior-acl deny ip 192.168.27.0 255.255.255.0 192.168.3.0 255.255.255.0

  the Interior-acl ip access list allow a whole

  group-access Interior-acl in the interface inside

  Hope that helps.

• vMotion works only in a switch and the management

  Okay, I reconfigure my network in all of my 3 guests. I had vMotion (via VLAN50) in a vSwitch dedicated using binding rising vmnic0. vMotion between hosts has worked well. It looked like this...

  

  I want to spend vMotion for a vSwitch shared with the management network. So I deleted the vSwitch2 vmnic0 and added to vSwitch4. Then, I created a new port group for vMotion with a new IP address. See below.

  

  In vSwitch4 properties, the management network has vmnic7 as active and vmnic0 as the day before. vMotion is set in front of it. The vSwitch is configured to load balance from the originating virtual port ID.

  vMotion does not work between hosts and gets stuck at 14%. I get a timeout between 10.10.50.70 and 10.10.50.71 (another host).

  I don't know that my physical switch is configured correctly. I have two ports accepting traffic on the management and vMotion VLAN. If I pass around the allocation of vmnic (sort of management use vmnic0 as active and vmnic7 as before) then I can still ping the IP management. Also, if I move back to vSwitch2 vmnic0, vMotion starts working again so I guess I'm missing something on the side of ESXi.

  What Miss me?

  Thanks in advance

  OK, problem solved. The webex engineer had in my screen and start troubleshooting this.

  First of all, vmkping he had the IP address of the new IP address of vMotion to another host, that has failed. Then, he ran 'esxcfg-vmknic - l' and noticed that the old port vMotion group was always enabled. In the graphical interface it has disabled this by going into the properties of the vSwitch2 > vMotion port group and checked the property of vMotion. Then run vmkping, but it has always failed. Back in the GUI, he removed the vSwitch2 completely. Ran vmkping and it worked.

  He assumed the problem was vMotion was trying to communicate through the old switch, in spite of remove me the adapters and the engineer vMotion traffic on the port group in this deactivation switch. It is useless for me to keep the old vSwitches, except as a back fall where vMotion failed. Seems I should have been more courageous and just removed them when I was creating the new vSwitch.

• Universal Clipboard works only one way

  Hello

  I have a MacBook Pro running Mac OS Sierra and an iPhone 5 iOS running 10 of the retina

  Universal Clipboard does work for my Mac to my iPhone.

  When you try to copy stuff from my iPhone Mac does not seem to be able to paste them.

  I checked the time phone and Mac are recorded in the same Apple ID

  The Wi - Fi or Bluetooth connection are on both devices

  I disabled and enabled the transfer option in the settings of devices

  Someone knows what to do?

  Thanks, Idan

  Me too. Exactly the same problem. I have iPhone 6 with iOS 10.0.1 and MacBook Air Early-2015 with macOS Sierra installed on Mac App Store, this morning. Mac & iPhone copy paste works, but the reverse is not.

• Why my apple wireless mouse scrolls only one direction?

  my mouse scrolls only in... and not return to the top of the page... ?  It's only a recent thing... I think... I tried all the obvious things... batteries... Stop... etc...

  any help out there?

  Did you go to system-> mouse preferences?  I don't have a wireless mouse, so I do not know what parameters/functions would be listed here, but you can give it a try.

• Satellite M300 - works only one USB port on the right side

  Hello

  in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
  Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

  And what happens if you connect the external USB mouse?
  It work?

  > I have the toshiba recovery of the burned disc, should I use it?
  Why not, you can test it with the new operating system preinstalled too.

• QSettings works only one way?

  I created a color object:

  Color myColor;
  

  The implementation, I did this:

  QSettings settings; // organization and app name set previously
  myColor = settings.value("mycolor").value();
  

  So far so good, but when I try to save the color:

  settings.setValue("mycolor", myColor);
  

  I get an error:

  No function call corresponding to ' QSettings::setValue(const char[12], bb:cascades::Color&)

  I've been reviewing the docs here (find "QVariant and Types of GUI" on the page)

  https://developer.BlackBerry.com/Cascades/reference/qsettings.html

  Any ideas?

  QVariant is QtCore class and does not work with bb::cascades classes. Try to convert to QColor first (not tested):

  bb::cascades::Color myColor;
  QColor color(myColor.red() * 255, myColor.green() * 255, myColor.blue() * 255, myColor.alpha() * 255);
  settings.setValue("color", color);
  

  Reading requires a reverse conversion.

• Cisco IPSec VPN works only one way.

  I'm hitting my head against the wall for more than 2 weeks now. I can't get this figured out.

  We have 2 locations and a server with an Internet service provider. Currently, we are connecting to our Internet service provider via a vpn ipsec to our headquarters. later, we will add the 1 direction.

  The problem is the following. My vpn is in place, I can ping my local ip address, my IP of the tunnel, the remote tunnel interface, the vlan remote or the gateway, but I can't ping anything you wanted. The branch to the ISP I ping the router in the Internet service provider's domain controller and the server very well. but I can't ping or talk about anything either at the Office on the side of the IAF. and so I can not communicate with any host on the LAN. Can someone please help me with this?

  Can I unload the configs of the two routers here someone watching?

  Thanks in advance.

  Exemption from the NAT on the end server must include the following reject order:

  NAT extended IP access list

  5 deny ip 10.1.20.0 0.0.0.255 10.178.164.128 0.0.0.127

  Disable the ip nat translation before testing again.

• Flow ip VPN in one direction

  Hello

  I have a VPN from Site to Site that works finein one direction, distance to the Center, i.e. it goes upward, using VNC to connect remotely to Central or vice-versa works, on the back (Central remotely) No and ping is not two-way.

  IMHO, it would take something lack on the central site, because if I ping from central lan to lan remote or vice versa asa central says:

  No group of translation found for icmp src, dst domestic: domestic IP_ON_CENTRAL_LAN: IP_ON_REMOTE_LAN (type 8, code 0)

  Distance is on nat0, i.e. I

  IP LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0 allow Access-list extended inside_nat0_outbound

  inside_nat0_outbound list extended access allow icmp LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0

  IP LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0 allow Access-list extended outside_1_cryptomap

  outside_1_cryptomap list extended access allow icmp LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 0 inside_nat0_outbound list of outdoor access

  card crypto outside_map 1 match address outside_1_cryptomap

  outside_map game 1 card crypto peer REMOTE_PUBLIC_IP

  On the remote control (a pix 501), I have:

  inside_outbound_nat0_acl LanRemote 255.255.255.0 LanCentral 255.255.255.0 ip access list allow

  access-list allowed inside_outbound_nat0_acl icmp LanRemote 255.255.255.0 LanCentral 255.255.255.0

  outside_cryptomap_20 LanRemote 255.255.255.0 LanCentral 255.255.255.0 ip access list allow

  access-list allowed outside_cryptomap_20 icmp LanRemote 255.255.255.0 LanCentral 255.255.255.0

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  card crypto outside_map 20 game peers CENTRAL_PUBLIC_IP

  outside_map card crypto 20 the transform-set ESP-3DES-MD5 value

  outside_map interface card crypto outside

  What I am doing wrong?

  Thank you

  No group of translation found for icmp src, dst domestic: domestic IP_ON_CENTRAL_LAN: IP_ON_REMOTE_LAN (type 8, code 0)

  something is wrong with the routing on Central

• The vlan vmotion should join him vlan management for vmotion work?

  Host 1

  Management network is a vswitch. IP VLAN 350 172.31.250.201

  vMotion network is on an another vswitch. VLAN 500 IP 192.168.1.1

  Host 2

  Management network is a vswitch. IP VLAN 350 172.31.250.202

  vMotion network is on an another vswitch. VLAN 500 IP 192.168.1.2

  Running Cisco UCS, the vNIC for vmotion are the vlan 500 but vmotion works only when they have access to the vlan 350 the management vlan.

  Sorry for the question noob but not vmotion need access to the vlan management in order to work?

  Thank you

  No, what you're doing - vMotion running in a dedicated subnet - is actually recommended to do this. Ensure that the UCS switch ports are configured correctly, allowing the VLANS required.

  André

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think

• Wheel scroll/zoom only in one direction in some programs

  When I use a scroll wheel (external or optical mouse or laptop touchpad scroll wheel) on my laptop (with Windows Vista), but scrolls or zooms in one direction in some programs. For example, when I scroll in any direction in Google Earth or AutoCAD, it zoomed in only (should zoom out when wheel downwards). In IE, the wheel works correctly. In Word, it does not at all. I saw online that others have had this problem with Vista, but I can't find a solution. How can I solve this problem and get the roulette wheel or the touchpad works properly?

  Hello
  I would like to start by installing the latest version of the software/drivers for you devices.

  I noticed a strange behavior in Chrome with my scrolling as well. It scrolls side by side, however I move the steering wheel (4 directions). And only the page up and down if I'm on top of the sidebar. It is a problem with Chrome... not your mouse.
  Most of the maps online zoom only, they do not go side by side... regardless of the browser.
  Word and other applications are a different floor. They must act as expected. This seems to indicate that your driver does not work properly. First try.

  (Note also that some older devices can be is no longer supported.) Mark <> Microsoft Partner