Vmrun running on the server Linux RHE 6.6 | Error: unknown error

Similar Questions

• Change the text of the legend on formready (running on the server)

  Hello

  To change the text of the caption of a field of text as follows:

  (formready, executed on the server, javascript)

  TextField1.caption.value.resolveNode("#text").value = "hello";

  It is a dynamic form and we use LC Forms ES 8.2 on a Windows platform.

  The problem is that the legend IS NOT change the text of the caption, if it runs on THE SERVER. If I change it to run it on the client (for example, Acrobat 9, PDF overview of LC Designer) it does not work.

  Thank you very much for your contributions!

  Daniel

  Set your renderAtClient on no. or false (I don't know the specific parameter). If you leave it in auto, then you allow the form to decide (form properties/Deafults). If the form is dynamic, then by default it will render to the client and not the server.

  Paul

• Mailbox unavailable. The response from the server is: 5.7.1 error: content rejected

  I have an application that sends emails when running. Off late a user when he tries to send a mail it receives the following error message...

  "System.Net.Mail.SmtpException: unavailable mailbox." "The response from the server is: 5.7.1 error: content rejected '...

  Note that this happens when he tries to send mail to itself and not otherwise. Can someone here on which could mean the error? Thanks in advance... :))

  Error code is generated in the back-end.

  'System.Net.Mail.

  to System.Net.Mail.

  to System.Net.Mail.

  to System.Net.Mail.

  to System.Net.ClosableStream.

  to System.Net.Mail.MailWriter.

  to System.Net.Mail.SmtpClient.

  Hi guys,.

  Thanks for the reply!

  I contacted my sources by taking care of the servers and realized that the user was an id in which the address of the server was not set up with our servers in domain. He used to connect to our servers using the VPN client. This is why he could not send mails to id field not (in this case itself).

• Server internal error - read the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I get the following error message when you try to access one of my hotmail accounts:

  Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.

  What is this error and how to fix it?

  Thanks Ellie

  I get the same message... must be a problem with hotmail.

• When I start the computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error.

  a.o.a, when I start computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." Here again, box comes and says bad googleupdate.exe Image.  I open the cutting tool, then again the box comes snippingtool.exe - Bad Image. Please solve my problem

  Original title: bad image

  Scan the PC for malware http://www.malwarebytes.org/antimalware/

• I have rcd an aol email asking me to connect to correct problems with the server and took me to an unknown website waqui.press.ma once I've trashed this e-mail my server started working normal is this mail a virus?

  I received an email from aol asking me to log in due to problems with my server, it took me to a website "waqu.press.ma" is an attempt to plant a virus?  Once that I've trashed this e-mail my server was working normal.

  If you are on iOS as implied by your footer, and you provided no identification or such information to the server, you're probably fine.   (Unless your device is jailbroken.  This process turns off a large part of the iOS security.)   If you have provided something IDs, change these now and then determine what other information is accessible using the credentials - the content of mail messages, no password that have been sent to you, etc.

• Failed to connect to the server? Windows Live mail error.

  I get this message:

  "The connection to the server failed.  Subject ' Fw: xxx' server: 'smtp.verizon.net' Windows Live Mail error ID: 0x800CCC0E Protocol: SMTP Port: 25 secure (SSL): Yes Socket error: 10060 "
  What can I do to send this email e-mail? I have a digital but still cannot send ID. I receive email fine.

  Use the settings recommended from Verizon. Right-click on the account name in the folders pane, and then select Properties.

  Under the servers tab, make sure that my server requires authentication is selected.

  On the Advanced tab.

  • Make sure that this server requires a secure connection (SSL) is selected for both servers.
  • Make sure that the outgoing mail port is 465 and the incoming mail port is 995.

  When you are finished, click work offline and delete all messages pending from the Outbox (below the records of account in the folders pane). Now, create a new test message and give him a single topic (e.g., trial 1). Send it to yourself and post a new message in your response.

• can not control! "The server has met an internal error that prevents to satisfy this demand."

  I am from Hong Kong and when I try to buy the subscription of the plan of the photograph, I can't add it in my cart. After trying so hard to find an another link to buy, it works:

  HTTP status 500 - com.digitalriver.exception.TrackedSystemException: SYS_000002

  type of status report

  message from com.digitalriver.exception.TrackedSystemException: SYS_000002

  Description the server met an internal error that prevents to satisfy this demand.

  I'm so frustrated.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• A connection to the server has failed. (status = 403) error

  Hello
  
  I created an application with ADF security. When a user is redirected to the login.jspx page, if he clicks on tabs on the menu bar (each of whom is jspx pages), he throws a pop up with the following error message.
  
  "A connection to the server failed. (Status = 403) »
  
  Is someone can you please tell me where the problem lies.
  
  Concerning
  APOORVA

  Hi Apoorva,

  Is there a way you can use the EL expression #{securityContext.authenticated} in your template?

  As you can see in http://docs.oracle.com/cd/E16162_01/web.1112/e16182/adding_security.htm#BGBIFHDF teturns true if the user is logged on and returns false if the user is not connected, then maybe it can help you hide or redirect these links depending on whether the user is already logged in or not. A way to redirect an af:goLink using a clove of support.

  Thank you
  Cree

• Configuration of database running on the server with 256 cpu

  Hi all
  
  We have a rac 11.2.0.2 on Solaris 10 installation.
  The servers are 2 and a short configuration is:
  
  SQL > show parameter cpu_count
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  cpu_count integer 256
  
  psrinfo | WC-l
  * 256 *.
  prtconf | grep 'memory '.
  Memory size: * 130784 MB *.
  psrinfo - pv
  The physical processor has 64 virtual processors (0-63)
  UltraSPARC-T2 + (chipid 0, clock MHz 1414)
  The physical processor has 64 virtual processors (64-127)
  UltraSPARC-T2 + (chipid 1, clock MHz 1414)
  The physical processor has 64 virtual processors (128-191)
  UltraSPARC-T2 + (chipid 2, clock MHz 1414)
  The physical processor has 64 virtual processors (192-255)
  UltraSPARC-T2 + (chipid 3, clock MHz 1414)
  
  There are a lot of settings Oracle automatically design based on the number of CPUs.
  In my case, this number is too high.
  
  For example, normally db_cache_size = 4 MB * cpu, in this case the result is 1 G of db_cache_size.
  
  The plan is to create several databases on this car, so the question is:
  
  Is there a way to design or to tell oracle a different number of cpu?
  and in general...
  You have some tips on how it is possible to configure a machine so powerful that runs a large number of instances?
  
  
  Thanks in advance
  
  Published by: Spugna on May 7, 2012 03:01

  Hi Spugna,

  Of course, as long as you use Oracle 11 g you can use Instance Caging to limit each database, the CPU usage. Although it is no longer applicable to the single server database or a CCR node I see no reason why not to use with RAC. Look here for more information:
  http://docs.Oracle.com/CD/E14072_01/server.112/e10595/dbrm007.htm

  You could also consider the consolidation of these different in a large database of databases if it is possible and there is no dependence application?

  Kind regards
  EVS

• Justification to open ports on the server Linux Essbase

  Hi all
  
  We have a firewall environment and in order to get the ports on Essbase Linux server I need to provide a document where it says that in the env firewall you must open the ports of 32768-33768 for the proper functioning of the system. Anyone can guide me please to this document.
  
  Thanks in advance...

  You can try this:-http://www.oracle.com/technology/products/bi/pdf/epm-components-communications-fd-11113.xls

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Stops running after the recall of custom Manager runtime error

  I have written a custom runtime error handler based on the example of ErrorHandlerExample which comes with TestStand uses Teststand 2010 SP1. It has been implemented as a reminder of StationPostStepRuntimeError in my folder of reminders of the Station.  I modified the example as follows:

  (1) added code to disable the transmitter USE if it was on.

  (2) added a call to an executable that sends an email to the currently logged in user.

  (3) call the TestStand standard runtime error dialog box using the method DisplayRunTimeErrorDialog of engine.

  (4) the user's selection process, then turn on the transmitter USE for any another option and then have an abortion.

  The recall also checks the State of the break and "do not show this execution" options selected by the user.  If the user selects break so the only option I can find is to call the method of the Execution.Break () API which breaks execution there in my reminder. The user must then step go out the recall.   Is there a way to instruct TestStand to complete execution of callback and the break immediately after completing the callback (i.e.at the next step after the error)?  I have compressed upwards and attached my modified sequence.

  If not, is there a better way to do this?

  Kind regards

  David

  Had the chance to try it yet but maybe StepOut is your solution?

  The help of TS:

  StepOut method
  Syntax
  Execution.StepOut

  Goal
  Resumes the execution of a suspended state and then pauses again once the execution of the current sequence.

• I recently bought the whole package of Adobe for a year. Now, I try to install Creative Cloud but it seems that I can't connect to the Adobe server i.e. the server is currently not responding error code: 207. I need your help. Thank you.

  

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• change the IP Address of the server.

  Hi hussein.
  
  We have an EBS R12.1 running on the server linux OEL, with IP 192.168.1.100
  The network admin want to change it to 192.168.10.211 for standardization purposes.
  How can I make my EBS R12 to adapt to this new IP address? AutoConfig is the solution? or should I run cloning?
  
  
  Thank you very much
  
  
  Ms. K

  Hello

  You will need to purge the table as shown FND_NODES (Note: 260887,1 - steps to own non-existent nodes or IP addresses of FND_NODES) then tun AutoConfig on the node of the database layer and the application layer node. Start application services once you are finished.

  If you get a blank page, please compile JSP files manually using "perl ojspCompile.pl - compile - hunting Pei 2 ' command.

  Thank you
  Hussein

• ORA-28547: connection to the server has failed, probable Oracle Net admin error

  Hello

  Environment

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  

  I'm ORA-28547: failed to connect to the server, probable Oracle Net admin error when connecting to the database as username/password@orcl,If, I do not @orcl it connects without any problems. But I can't connect from client machines without dbstring.

  This problem started recently, and I understand that it is because of the dynamic ip of the linux machine. Previously the Linux m/c ip was 172.25.210.177 unfortunately was launched once the machine ip has changed in 172.25.210.148.

  To bring the database up I started as usual and got to the top, but when connecting db with the above error is being username/password@orcl.

  To solve the i changed the ip address in tnsnames.ora and listener.ora but no luck. Please advice how to solve.

  It will run until the next change of the ip address. If you want a permanent solution, you must assign a static ip address. Why is your dynamic ip address? What is a local testbox.foobar.com or a production system that must be accessible to other systems?