Mailbox unavailable. The response from the server is: 5.7.1 error: content rejected

Similar Questions

• Service temporarily unavailable the server is temporarily unable to service

  Hi all
  I just cloned 11i environment, but when I try to access the system administrator responsibilities, I get an error:
  ------------------------------------
  Service temporarily unavailable
  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.
  ------------------------------------
  
  It feels like the system mode now, but I did not put it in this mode.
  What can I check to fix this?
  
  Thank you
  Eugene

  Eugene,

  It is not recommended to place CUSTOM_TOP in the application (i.e. APPSORA.env) env file, this file will be replaced each time that you run the AutoConfig. The best practice is to set the CUSTOM_TOPs in the .env customthat will not be affected by the service of autoconfiguration. When you do the cloning, this CUSTOM EPS file will be copied, and you just need to rename (with the good _) and change all CUSTOM_TOPs path to point to the directories that you have on the target application node.

  Does this mean that I don't have to add /uat/appluat/appl/au/11.5.0/forms/US to FORMS60_PATH?

  This will be done as part of the quick Clone, so AutoConfig will take care of the directory $AU_TOP.

  Kind regards
  Hussein

• Server internal error - read the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I get the following error message when you try to access one of my hotmail accounts:

  Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.

  What is this error and how to fix it?

  Thanks Ellie

  I get the same message... must be a problem with hotmail.

• Loader will load the images from another server, but then we get error on Bitmap operation

  I develop an application that currently uses Loader to get the images to another server.  This should not work now because we are still waiting for the owner of that server to put a crossdomain in place file.  However, it works - sort of .

  Charger can load the images very well, without error.  But then the application has a feature that we are a great duplicate of the image to display in a sidebar, we do this in this way:

  var myBitmap:Bitmap = Bitmap (loader.content);

  and when will we get a Flash player 2122 security error, violation of sandbox.

  So although I hope that all this will fix itself when the crossdomain.xml file is set up, I am confused as to why we get only the sandbox error when we do a bitmap image, and not when we try to initially retrieve the image.

  (By the way: is there a better way to make a "copy" of an image loaded by a loader and change its width and height to display simultaneously in another part of the scene?)  "I have need to change its real dimensions - I just need to change its display width and height).

  Thank you!

  The sandbox allows you to view, not not editing from another server without a cross-domain.

  Therefore, when you try to load up, it loads, it 'read only' and gives you an error when you try to "change" by a new Bitmap out of it.

  This should resolve itself once crossdomain is in place.

  || EDIT |

  I just realized that I have to clarify my statement a bit more.

  When you load images from another server without a crossdomain, it only allows the load for display.  When you try to load data, it will fail.  It is because that data XML, or another type of data is editable by default, and the images are only visible by default.  As a result, the image fails when you try to convert it to an editable form.

• Failed to connect to the server? Windows Live mail error.

  I get this message:

  "The connection to the server failed.  Subject ' Fw: xxx' server: 'smtp.verizon.net' Windows Live Mail error ID: 0x800CCC0E Protocol: SMTP Port: 25 secure (SSL): Yes Socket error: 10060 "
  What can I do to send this email e-mail? I have a digital but still cannot send ID. I receive email fine.

  Use the settings recommended from Verizon. Right-click on the account name in the folders pane, and then select Properties.

  Under the servers tab, make sure that my server requires authentication is selected.

  On the Advanced tab.

  • Make sure that this server requires a secure connection (SSL) is selected for both servers.
  • Make sure that the outgoing mail port is 465 and the incoming mail port is 995.

  When you are finished, click work offline and delete all messages pending from the Outbox (below the records of account in the folders pane). Now, create a new test message and give him a single topic (e.g., trial 1). Send it to yourself and post a new message in your response.

• can not control! "The server has met an internal error that prevents to satisfy this demand."

  I am from Hong Kong and when I try to buy the subscription of the plan of the photograph, I can't add it in my cart. After trying so hard to find an another link to buy, it works:

  HTTP status 500 - com.digitalriver.exception.TrackedSystemException: SYS_000002

  type of status report

  message from com.digitalriver.exception.TrackedSystemException: SYS_000002

  Description the server met an internal error that prevents to satisfy this demand.

  I'm so frustrated.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• A connection to the server has failed. (status = 403) error

  Hello
  
  I created an application with ADF security. When a user is redirected to the login.jspx page, if he clicks on tabs on the menu bar (each of whom is jspx pages), he throws a pop up with the following error message.
  
  "A connection to the server failed. (Status = 403) »
  
  Is someone can you please tell me where the problem lies.
  
  Concerning
  APOORVA

  Hi Apoorva,

  Is there a way you can use the EL expression #{securityContext.authenticated} in your template?

  As you can see in http://docs.oracle.com/cd/E16162_01/web.1112/e16182/adding_security.htm#BGBIFHDF teturns true if the user is logged on and returns false if the user is not connected, then maybe it can help you hide or redirect these links depending on whether the user is already logged in or not. A way to redirect an af:goLink using a clove of support.

  Thank you
  Cree

• Windows media player: the server is running has no error

  When I got this error when trying to play a piece of music, I ran WMP Troubleshooter who reported

  • Corrupt recording script
  • Reset Windows Media Player
  • Windows Media Player library
  • Network Windows Media streaming settings are corrupt

  All errors have been shown to be fixed, and when I tried again to play the music, everything was fine - until I then restarted the pc when the same error "Server execution" appeared.

  I removed the WM Center and WM Player, rebooted, reinstalled WMC and WMP and restarted.  This time, when I tried to play a song that I got a very strange message that was clearly not of Microsoft origin "trial expired, buy now or enter your serial number" in a window had.

  I ran a full scan MS Essentials without result.

  I tried the suggestion in a previous post:

  Method 1

  (a) click Start and in the search bar type cmd.exe

  (b) right click on cmd.exe and click Run as administrator

  (c) in the command prompt, type the following command

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  (d) press on enter and restart the computer

  (e) check if you are able to read the files in Windows media player.

  Same result - "trial expired...". »

  I tried solving problems of parameters of Windows Media Player, which just reported 'Configuration settings could be wrong', but did not set.

  Where should I go from here?

  Hi Pavish,

  Thanks for letting us share the resolution.

  Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Vmrun running on the server Linux RHE 6.6 | Error: unknown error

  I want to start the Windows 7 VM on RHE Linux server host 6.6 using vmrun. I installed Workstation 10.0.1 on host and it works.

  Verified using vmrun, vmrun list.

  But when I tried to start the virtual machine, using

  "ws t vmrun start nogui [VMpath.vmx]."

  It returns ' error: unknown error ".

  Could someone help me with this problem?

  Thank you!

  Correction of this problem. Am help at the bottom of the post. It was discussed with Linux kenrel and module Vmmon

  Re: After installation, kernel 2.6.32 - 504 could not open/dev/vmmon

• I recently bought the whole package of Adobe for a year. Now, I try to install Creative Cloud but it seems that I can't connect to the Adobe server i.e. the server is currently not responding error code: 207. I need your help. Thank you.

  

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Problem in sending the request to the server, MDS started after expired connection error

  Hello

  I have a problem when sending request to the server. I need to manage the time of connection error. When I send a request from my device to serve and connection time-out error, I need to send the request back to the server.  To test this error, before sending the request, the MDS quit and then I try sends the request to the server. After 2 minutes, the appliance up Connection Timed out Error.

  Now when I start the MDS and refer the request to the server, the request sent when the connection has expired also reached the server. (Totally 2 request are sent to the server).

  What is the behaviouir of MDS? If so how should I handle this.

  or have I missed something on my side?

  I use BlackBerry 4.2.1 JDE with SDM (4.5.0)

  Thanks in advance.

  (Note: see this link for the behavior of MDS.)

  Hi all,

  I finally found the solution.

  Everytime I go to start the net, I check that the connection is available or not by using below codes...

  HttpConnection conn=null;try    {    conn = (HttpConnection) getConnection(myURL);      if(conn == null)     {           Inform the user the process is in offline       }     catch(Exception e)      {      }      finally      {                try                {                    conn.close();                    conn = null;                }                catch (Exception e)                {                    conn = null;                }            }
  

  When this function is execute the connection is not closed properly.

  After that I got the connection error, start the MDS, meanwhile runs unclosed connection.

  Now, I removed the check above, its works very well.

  I made a mistake. Finally, I saw that and correct it.

  Once again thanks for all your opinions and answer.

  Sorry for my English.

• ORA-28547: connection to the server has failed, probable Oracle Net admin error

  Hello

  Environment

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  

  I'm ORA-28547: failed to connect to the server, probable Oracle Net admin error when connecting to the database as username/password@orcl,If, I do not @orcl it connects without any problems. But I can't connect from client machines without dbstring.

  This problem started recently, and I understand that it is because of the dynamic ip of the linux machine. Previously the Linux m/c ip was 172.25.210.177 unfortunately was launched once the machine ip has changed in 172.25.210.148.

  To bring the database up I started as usual and got to the top, but when connecting db with the above error is being username/password@orcl.

  To solve the i changed the ip address in tnsnames.ora and listener.ora but no luck. Please advice how to solve.

  It will run until the next change of the ip address. If you want a permanent solution, you must assign a static ip address. Why is your dynamic ip address? What is a local testbox.foobar.com or a production system that must be accessible to other systems?

• mapped to the server drives

  I have a new windows 7 pc pro and you want to connect to a server writers.

  The server is Windows server 2012 R2

  I can connect only to readers of server by IP address.

  If I try to connect using the server name, I get an error 0 x 80070035.

  The other PC, I can connect to the server via the name of the server, but not this new Acer.

  I disabled the firewall and antivirus

  Any suggestion would be appreciated

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• TCP/IP connection ended unexpectedly by the server.

  I had problems with my broadband endangered and turning for a few days and then all of a sudden the following appeared when I turned on my Windows Live Mail

  The TCP/IP connection has been terminated unexpectedly by server

  Your IMAP command could not be sent to the server, due to non-network errors. This could, for example, indicate a lack of memory on your system.

  Configuration:

  Account: Btinternet

  Could someone please tell me if the above interferes with my direct mail and if yes, how should I put it right.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. Did you do last changes before this issue on your system?
  2. You use a third-party security software on your system?

  I suggest you to follow the below methods and check.

  Method 1: TCP/IP can sometimes become damaged or altered. We can refer to TCP/IP and check if this solves the problem.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

   

  Method 2: I suggest you temporarily disable the antivirus software (and other security such as anti-malware software, etc.) and the firewall on the computer and see if that fixes the problem.

  If disabling the antivirus/firewall resolves the issue, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful. Please let us know if you need help with Windows.

• Fatal error when installing the Server Application Weblogic 11 g (10.3.4)

  Hello

  In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.

  So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".

  Can someone help me please to solve this error. Thanks in advance

  Kind regards

  Priya

  Hello

  The message that took place there is a permission problem. So could you please try the installation with administrator privileges.

  In case if the same mistakes persist could you try to install another directory C in a different way.

  Kind regards.

  Prakash.