vmWare 5.5.3 or Acronis Server 10 tib 5.1 converter.  TIB small file without problem.  More big tib "source parameters are invalid.

Similar Questions

• I'm looking for an image compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Original title: Windows Server

  I don't know where to put this question, so here goes I am looking for a picture compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to install VMWare ESXi on HP integrity rx Server 6600

  I have a VMware-VMvisor-Installer - 5.1.0.update01 - 1065491.x86_64.iso and I have installed successfully on IBM system x 3650 M3.

  But I can not install the HP integrity rx Server 6600 (hp integrity rx 6600 64-bit server, processor intel Itanium 2 1.6 Ghz core).

  Please teach me how to install VMWare ESXi on HP integrity rx Server 6600

  Thank you.

  Hello

  You cannot use ESX / ESXi on Itanium.

  Take a look at these...

  https://communities.VMware.com/message/1491338

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00773159-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3257036&ac.admitted=1379566669455.876444892.199480143

  Kind regards

  Assane

  If you find this useful, mark the answer as correct/useful

• VMware View 5.1.1 Security Server LDAP errors

  Im having a serious amount of errors on my VMware View (5.1.1) security server

  Log debugging shows a large amount of LDAP errors, see below.

  2012-09 - 06T 10: 46:49.075 + 02:00 ERROR (0610-0940) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 01:50.102 + 02:00 ERROR (0610-0CB8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 16:50.109 + 02:00 ERROR (0610-0FE8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 31:51.120 + 02:00 ERROR (0610-0DD8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 46:51.132 + 02:00 ERROR (0610-0244) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 01:52.159 + 02:00 ERROR (0610-0F3C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 16:52.155 + 02:00 ERROR (0610-0E5C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 31:53.182 + 02:00 ERROR (0610-0F68) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 46:53.194 + 02:00 ERROR (0610-092 C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 13: 01:54.217 + 02:00 ERROR (0610-08E4) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 13: 16:54.227 + 02:00 ERROR (0610-0504) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE

  Anyone got any suggestions?

  Hello

  The plugin ws_admin trying to make field checks every 15 minutes, but given that your security server is not on the field these checks fail. It is completely harmless, but they should not run in first place, I raised this in their own country.

  Mike

  Edit:

  There is a simple solution for this in 5.1.x:

  Under the current registry key HKLM\Software\VMware, Inc. \VMware VDM\plugins\wsnm\admin, create a new key named Params, and under that a new DWORD value named InitiateDomainChecks with 0 data. Once set, you will need to restart the VMware View Security Server service for the change to take effect.

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• VMware View 4.6 v Windows Server 2008 R2 Service Pack 1

  Good evening

  After a lot of research on the web, I am unable to locate a resource that clearly indicates if Windows 2008 R2 SP1 is supported for see 4.6.

  We are currently facing a problem where after installation of Service pack 1, it has been speculated and not confirmed, connection brokers now does not activity to redial. It is currently a failure with an error of 'Reestablish interrupted task', and is all the details that we get.

  Can you please advise or point me in the direction of an article which States:

  1. is 1 supported Service Pack or not supported within view 4.6?

  2 - is a reported and know question?

  3. is there a hosfix if this is a known issue or a workaround?

  4. is there anyone here running Windows Server 2008 R2 Service Pack 1 installed without problem?

  I can't believe that there is anyone out there with this configuration.

  All items I havd read just say N/A for SP1, because I can find was published the day of the release of SP1 or a few days later, no other updates available.

  I was truggelling with it for weeks, and I can't get a straight answer from anyone. If anyone can help I would be most grateful.

  Thank you

  Hello

  View 4 course I recently attended it is devalued in black and white that what follows is supported for use as brokers of the connection:

  Windows 2003 32-bit SP2

  Windows 2003 32-bit R2 SP2

  Windows 2008 64 bit R2

  IE SP1 isn't here, so who deduct that it is NOT supported.

  Concerning

  Stuart

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Original title: iso to wim

  I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Thank you

  Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.

  Thank you!

• Connected to Server VPN in Vista, but no sharing of files

  I have a Vista VPN server running remotely.  My client is Windows Server 2003, and I want to access the files on the remote vista box.

  This customer also has a VPN connection to another remote Windows Server 2003 box, which works correctly.

  I can make the connection to the Vista VPN server successfully, but file-sharing does not work.  Still, file-sharing does not work when I turn off the other VPN connection.  I have completed virtually all settings, turned off the firewall in the Vista box.  Made sure IPv6 is not acting as a remote gateway... etc.  There are shared folders available in the vista box.

  Interestingly, Vista server does no IPv4 or IPv6 connectivity under the status of the incoming connection, while the customer indicates that there was some data transferred.

  Any ideas would be very appreciated.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Please repost your question in the above Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Why Windows Explorer (Windows 7 PC to the Server 2003 AD domain) keep crashing when accessing files on a network share.

  1. Why Windows Explorer (Windows 7 PC to the Server 2003 AD domain) keep crashing when accessing files on a network share.

  Hi John,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  Hope this information helps.

• Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no p

  Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.

  Is there a file .idlk remaining on the server which is not removed properly?

• Every time I try to open a pdf document that is located on a server of our company (so not on my laptop), the drive still shows error. Cannot open the document. Only in EAC I copy the document to my local PC, I can read without problem. Server is mapped

  Every time I try to open a pdf document that is located on a server or in our company (so not on my laptop), reador always shows error. Cannot open the document. Just in case I have copy the document into my local PV, I can read without problem. Server is mapped in my FileExplorer (Win7). So boring and big bug I think.

  Massage of error: "there was an error opening this document. The network path was not found.

  Hi tobiask53385798,

  Could you please try to disable Protected Mode under ' Edit > preferences > (protection) "and see if that helps.

  Let me know.

  Kind regards

  Ana Maria

• VMWare offers an alternative to Terminal Server services in the following respect...

  We have a set of accounts called Sage 50 accounts. It is a pretty horrible multi-user or single application for Windows.

  Set up multiple users to propose you a Windows computer on the local network, 'the Sage server' and install all the files of this machine.

  The client Setup is to install even on the rest of the PC but editing an ini file so that the client application connects to the data through a drive mapped on the Central Server network.

  It comes from old outdated technology, such as the underlying FoxPro database and has some horrible incompatibilities for example. SMB2 locking on the Vista and Win7 customers, products client antivirus hung their machines she virus check the program folder, hogging the bandwidth of the network, etc...

  Told me a stable solution it so to do a single installation of the «Wise» server on a Windows 2003 server and workstations to connect through the Terminal Services. In this way, it keeps it OS independent and does not monopolize the bandwidth network sends tons of data to the client.

  I was wondering if VMWare offers products that reach a similar facility?

  daxtrajero wrote:

  Perfect thanks.

  Last question (s) I promise you!

  (1) each physical workstation is currently MS Office, Sage accounting and Outlook for e-mail. Does make sense to run all these Virtual PC?

  (2) material, on which I intend to run ESXi is Intel Dual Core, 2 cards, LAN, 4 GB RAM, 2 x 500 GB SATA II drives

  Is this OK spec to manage virtual server 2 k 3 and 10 workstations XP? I looked at the minimum requirements and it meets those, but do not know how mucb still to go to manage my 10 workstations & Server?

  (1) Yes, it would be nice

  (2) short on memory type - you have enough ram for each of the servers/workloads that will run on it. You can 'out' with less memory allocate virtual machines than for actual physical boxes, but I would like that esxi host to have at least 8 GB of ram - 12 GB would be great. Disc - looking spindles as much as possible - and for chucks be as fast as possible. If I were designing it, and recognizing the budgets, I would like to get a pair of good small mirrored disks (to be used as operating system - really small is fine. Can I have 4 or 5 SAS drives in a raid 5

  Will be what you specified work? ermmmm... maybe a little - it depends entirely on the amount of use and the load. If you have any questions, then it would be wise to run all applications except perhaps for our wise accounting the physical desktop application and only use the jobs of virtual machine for the good stuff.

• Should what form of VMware I use for my new server?

  Hi all

  I'll make the leap to Windows 2008 Ubuntu 12.04 LTS Server I did some recent tests and there really is a dramatic improvement in the response from the server web time when hosting on a Linux server.

  This server will be a guest o/s unique dedicated to OTRS and SugarCRM CE accommodation for 10-20 agents/users (more than 5 clients OTRS at any time). Not a huge demand but still enough to run a little slugish under our old current windows server.

  The new production server will be:

  Dell Poweredge R300

  Quad Core Xeon L5410 (2.33 GHZ)

  8 GB RAM

  My question is: Baring in mind this server will be for a single guest, what form of VMware should I launch? I imagined that I would use Workstation 9 running on Ubuntu desktop and the prompt to be Ubuntu Server. But a person once I suggested that I use ESX/ESXi, even if I don't use a VM on it as it is easier to backup or migrate to another. material

  Thanks in advance for any advice.

  The free version is the exact same software as the paid version is - when you apply the free license it will Crown just the functionality of the ESXi host and if you decide to take a paid for the license, that you can simply apply the license and characteristics will be open.

  That said, you can still remotely manage your hosts and virtual machines, it is running, take snapshots and backup virtual machines with the free version

• Yellow! for VMware network driver after upgrade to server 2003

  We have an older Windows Server 2000 guest who was P2V sometime.  It is one of our domain controllers.   In the process of migrating our AD domain until 2008, I have tried to upgrade this server to 2003 our ad can be in 2003 as part of the move towards 2008.   Long story short, in order to upgrade to 2003 server, I had to remove the old Compaq Network Managment of the machine software.  This software was not in Add/Remove Programs, then I went to the manual way to remove hidden drivers, when still it did not work, I have deleted all entries in registry SEO Compaq network management.  I proceeded with the upgrade, but when the system has finished, the LAN connection is missing, and Device Manager has a yellow explanation point to the NIC for VMware Acceleraged AMD PCInet adapter.

  I recloné and resume the upgrade with only remove entries from registry for Compaq Network MGT.  Yet once, after an upgrade, the same problem appeared with the network card.

  I don't know how to successfully remove the Ghost for the Compaq when the software seems to not exist on the computer.  (nothing in Add/Remove Programs, nothing in C:\program files, start anything in the 'Programs' from the menu list.

  Once I get the error on the NIC card I can't fix.  I tried to reinstall the VMWare driver from the VMTools directory, but that still does not work.

  Not sure about Windows 2000, but IIRC the HP drivers can be removed trough the network card properties!

  Be sure to reconfigure the guest operating system to Windows Server 2003 in the properties of the virtual machine after the upgrade. I had probably also remove the NIC and add an E1000 NIC, which is the default value for Windows 2003 VMs.

  André