VMware and rdesktop ubuntu has the same full screen shortcut keys

Similar Questions

• Illustrator 282C pantone color numbers different for example RBG, CMYK, Web color compared indesign colors and photoshops which has the same values of color for the two C. 282 I typed in a different color and the same issue. Why would it be different in a

  This is illustrator

  

  It's photoshop

  

  Libraries are the same? The two RGB colors are different and they have different look on the screen.

  None of this has to do if you are not working with color management and conversion of spot color to a CMYK process color, which seems to be the case here...

  Mylenium

• Two s flv on the swf page, button full screen on every fact the same full-screen go video

  OK, so I use CS3 to try to put two videos on the same page of .swf .flv, BUT only go full screen any button of the video for skin to go full screen I press, and all the rest of the buttons on the skin works for the appropriate video. I remember in Actionscript 2.0, in component for video settings, you can change the name of the field in the schema to play multiple videos in a .swf file, wondering if AS3 had a similar setting to the full screen.

  You are welcome.

  p.s. Please mark this thread as answered, if you can.

• The sight of my computer has been partially reduced to a minimum and can not get the view full screen. All around the page view is black. Help!

  My view of the Office was "restored to the bottom" permnantly and it cannot be changed. What I discovered on the computer remains low and impossible to get an overview

  Hello Noidea,

  1. When you say restored down, do you mean to say that it is minimized in the taskbar?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the resolution of the screen and check if it helps.

  Change the screen resolution

  Method 2:

  If it is a recent issue and then try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

• I can't receive e-mail of 1 specific address and this address has the same problem with mine.

  It is a problem with Thunderbird. I can email on the web client, but not through thunderbird for this one specific address.

  whcorgan said

  Nevermind, I fixed it. For some reason, my email address was considered undesirable. I had to go and change the filter of junk mail with my ISP. Thunderbird not having a junk e-mail folder, I didn't know what was going on until I signed my web mail.

  Thunderbird gets all messages if you use IMAP. If you are using pop, you get what's in the Inbox. This limitation is based on the Protocol of messaging of your choice. Even if your email provider may be in ages dark and offer only pop. But they would be in a very small minority, if that were the case.

• delivery of mail with 5510 e error - print. updates and connection are ok. a friend has the same problem.

  I checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and everything is good.  But I still have the error of mail delivery when e-printing.  And my friend has the same problem with his new b111a 5510.  What could be the problem?  Regular, printing, scanning, and so on work fine with my wireless connection.

  So looks like it's maybe a problem with the E-mail address provided by your internet provider, you send from,

  What I would say as a test is to create an email account with g mail and or yahoo and try to send the e-mail to your eprint/E-mail account and see if it accepts the email too, make sure you have your printer the value Accept e-mail for all users, you can do so by logging into Eprint Center and then enter these parameters and select this option

• How to block the warning "full screen".

  Hello, I use my browser to watch videos for most of the time, and when I open the video full screen, it gives me a warning that said "Youtube is now in full screen, click ESC to exit" and this warning remains there for about 3-4 seconds. I know that's not much of a problem, but it covers almost half of the screen, so it annoys me. So, I just want to know if there is anything that I can block this warning. Are there?

  There should be an option on the message that helps remember the preference for the site. You can also right click on the page, select 'View Page Info' and set the permission to full screen for the site in the "Permissions" tab

• It will cause problems if my new iMac has the same id and password that my old iMac that I still have and use

  It will cause problems if my new iMac OS 10.11.3 5 k has the same user id and password as my old 2008 imac OS 10.9.5

  No it just means that you can download and sync past purchases and data to iCloud

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Xperia Dk31 z1 has the same cable EC21 and magnetic connector as in Dk36 for Z2?

  Hi guys

  I still can't get an answer (personal Xperia does not respnod) for a simple question:

  Dock station is the Xperia Dk31 z1 has the same cable EC21 and magnetic connector as in Dk36 for Z2?

  If so, that I could disconnect DK31 cable and load Z2 with magnetic original cable... ))

  Someone knows for sure please?

  Ask the user to this category:

  http://talk.sonymobile.com/T5/Xperia-Z2/magnetic-charging-dock/m-p/687915#U687915

• I get a message saying that the installation has detected that a reboot of the machine may be pending and recommend I have quit the installer and restart my machine.  I did 4 times and tried to install again and again but keep the same message.  Guilty pl

  I get a message saying that the installation has detected that a reboot of the machine may be pending and recommend I have quit the installer and restart my machine.  I did 4 times and tried to install again and again but keep the same message.  Help, please!

  

  Hi Keleahaiko,

  Please click on IGNORE and continue with the installation, let us know if this helps.

• Can I have VMWare Player and Virtual Box to the same PC?

  Can I have VMWare Player and Virtual Box to the same PC?

  Can perform the same two times?

  Hello

  Yes, that's correct.

  --

  Wil

• What is the difference between the package from photography to Photoshop and Photoshop on his own? Photography Photoshop has the same capabilities as the single app?

  What is the difference between the package from photography to Photoshop and Photoshop on his own? Photography Photoshop has the same capabilities as the single app?

  Hello

  Greetings!

  Photography package to include Photoshop and Lightroom.

  However, if you choose Photoshop as a single application you get 20 GB of cloud while in terms of photography, you get 2 GB of cloud.

  Plan of photography is less expensive than the only application.

  Check here: https://creative.adobe.com/plans

  Concerning

  Jitendra

• Configure replication vSphere fails - there is a virtual machine that has the same UUID instance than the one you are trying to configure

  Hi all

  
  

  My colleague was trying to extend a hard disk of a server 2008R2 who (1) had a snapshot and (2) was being replicated. The operation has failed and they took the snapshot replication can be stopped. Long story short when I got to him, the server could not be configured for replication and could not extend the disk and a vMotion failed.

  Looking at the files of the VM on the data store and the VMs .vmx file we have all the characteristics of a virtual machine always configured for replication of vSphere. If you try to configure replication vSphere causes an instant error "vsphere replication does not support change the length of a replicated disk. After a few changes I can reconfigure vSphere new replication, however, when the wizard has finished, I get a new error message (see below):

  "Try to set up vSphere that replication has failed for the VM"name vm"during the creation of groups"vm". There is a virtual "vm-name" machine that has the same instance UUID ' UUID of the Virtual Machine "that you want to configure. The existing vSphere of replication is configured for site protection.

  A possible solution would be to reset the database embedded VRMS our DR as suggested here VR configure replication after losing a VC site server but I was wondering if there is another solution? I have not reset the database of VRM before and cannot find a document that tells exactly what to do. I guess I need to stop all the rehearsals before resetting the database?

  See you soon,.

  Dean

  Hello

  There is no need to reset the VRMS database.

  If you know the value GID... an orphan replication, you can use the CROWD VRMS (https://vrms_address:8043/mob/?moid=GID-...&vmodl=1) to call the destroy method - it is eliminating simple replication to the site of the source or the target.

  If you don't know the GID... value, it can be found of VRMS DB or log files. Please file an SR for assistance.

  This procedure is already documented in internal KB articles and help using VMware support:

  KB article internal 2056086, section "cannot replicate virtual machine as there is another virtual machine with the same UUID instance"

  and also internal KB article 2060751.

  The admin guide section will be updated as it is confusing right now by suggesting only to reset the DB.

  Kind regards

  Martin

• Portege M100 PPM10A-0008GP & PPM10A-09E6M has the same motherboard?

  Portege M100 PPM10A-0008GP & PPM10A-09E6M has the same motherboard?

  Thank you very much!!!

  Portege M100 PPM10A-09E6M seems to confirm this hardware configuration:
  Intel Pentium M 1.3 GHz LV
  Graphics Controller Intel 855GM
  RAM 512 MB (installed) / 2 GB (max) - DDR SDRAM - PC2100 - 266 MHz
  Hard drive 80 GB

  The Portege M100 PPM10A-0008GP seems to support the Intel Pentium M 1.2 GHz, 256 MB and 60 GB HARD drive.

  But it seems that the motherboard must be the same.