VMWare became unresponsive with all virtual machines

Similar Questions

• All virtual machines on my ESX host off power at the same time

  Hi all

  Recently I attend the interview. a guy asked me this question

  < police = "Times New Roman, serif" >all virtual machines on my power off ESX at the same time host < / police >< / police >?

  What was the cause of the highest of the error, how to troubleshoot the error.please me.anybody guide to address this problem?

  Thanks

  Surya

  If all the virtual machines if lower at the same time, my bet would be VMware HA. Just for fun, build it inside your head:

  (1) 8 ESX nodes, all service consoles connected to a unique management switch.

  (2) now to create a cluster of these nodes, put all your virtual machines in there and activate HA, choose ' host isolation response: power off.

  (3) draw power from your management switch. HA on each host will deduct that the host is isolated-> turn off all the virtual machines.

  Each host will think the same thing, and hop find you with all virtual machines down to the time in the whole of the cluster. Have seen this one several times when people go and upgrade their management switches in the evening ("hey, it's only management").

  Visit my blog at http://www.vmdamentals.com

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• Find all the unique ID associated with a virtual machine

  is there some sort or any command that I could find all the unique ID associated with a virtual machine?

  I mean like ID: ID hardware, CPU ID, UUID, MAC address and etc...

  This should help you

  https://psvmware.WordPress.com/tag/VM-UUID/

• Database SQL query to get all virtual machines with comments enabled customization?

  Hello

  Does anyone know of a SQL query that can be executed against the vCloud Director DB for all virtual machines who invited enabled customization?

  I can't have PowerShell to pull these data on a global scale.

  Thank you

  jkasal

  Has taken a quick...

  Select top 10 v.id, v.name, v.vapp_name, v.vc_id, v.moref, ui_vapp_vm_list_view v.guest_customize_enabled v with (NOLOCK)

  seems to have if the setting is enabled or not.

• The list of all virtual machines with more than 2 virtual disks

  Hello.

  I want to list all virtual machines in a data center vCenter, who got more than 2 virtual disks. Here's the workflow, I am working on that:

  1 get the view of data center

  2. get the Cluster Data Center view like the 'begine_entity '.

  3. for each view cluster overview the VirtualMachine bit cluster seen as 'begin_entity '.

  4. for each VM view, this information: VirtualMachine-> config-> hardware-> device of

  Above information is a table.

  I need help in order to extract information from this table disk, then run an if condition where the VM who got more than 2 discs should print.

  Could help you. I wrote the script to the point 4. just need advice for the posterior.

  Thank you.

  You can try one of the following values-

  1 If ($vm-> {'summary.config.numVirtualDisks'} > 2) {...}

  2 $diskCnt = grep {$_-> isa ('VirtualDisk')} @{$vm-> {'config.hardware.device'}};

  The above assumes that you've got your $vm with a filter property as follows:

  $vms = Vim::find_entity_views (view_type-online 'VirtualMachine'), the properties-online ['summary.config.numVirtualDisks', 'name', 'config.hardware.device'];

  my $vm foreach (@{$vms}) {}

  ...

  }

• All virtual machines with VLAN

  I'm trying to get a list of all virtual machines in a given VCenter, with their VIRTUAL networks. Can anyone help?

  If your virtual machines are connected to dvSwitches instead of ordinary vSwitches?

• All Virtual Machines VMware corrupted?

  I can't access one of my virtual machines.  There is a small red box on the icon of the virtual machine.  The VMWare Workstation says that the virtual machine appears to be in use, but I know for a fact that they have been closed.  Now, I can't access any of them: Ubuntu 64-bit, Windows 98, Windows 2000 Professional, Windows XP Professional, all real CD I own.  Don't know what happened, they worked very well the other day?  Any help would be GREATLY appreciated.  Thanks in advance.

  Sincerely,

  Markerline

  Yep - if you lock files and delete lock directories.

  They sometimes are not cleaned after a host or a crushing of VMware

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Determine the version of VMware tools on all virtual machines

  I found a powershell script that shows how to enumerate the vmtools on a virtual machine version, it is possible to use a script to display the version on all virtual machines without hard coding names? Thanks in advance for your help.

  You can try something like this

  get-vm | % { get-view $_.ID } | select Name, @{ Name="ToolsVersion"; Expression={$_.config.tools.toolsVersion}}
  

• Beta 6 - lost sharing with my virtual machine to Yosemite...

  I'm running Beta of Yosemite and VMWare 6.0.4

  I chose is not upgraded to VMWare 7 until the final version of Yosemite is released and VMWare 7 has made all its corrections accordingly.

  Now, after reviewing the above, I didn't have problems (to my knowledge) with the help of VMWare on the Yosemite Beta 6.0.4 until the most recent beta version updated this morning.

  After updating Yosemite Beta Beta 6, I lost the ability to share with my Mac, and all my desktop icons disappeared.

  I get the following message:

  

  I tried to turn sharing off - restart the virtual machine (windows 7), turn on sharing, restart the machine virtual and verified that sharing is enabled on my mac after the update.

  Are the guru of VMWare is aware of this and work on a resolution?

  I thought about it!

  -Uninstall VMWare tools

  restart the virtual machine (windows 7 in my case)

  Re - install VMWARE tools

  restart the virtual machine

  reactivate the sharing

  log out of the virtual machine

  reconnect

  It works now

• Access to the network in all virtual machines lost after that put 8.1 to level.

  Today, I upgraded my host computer to Windows 64-bit Pro 8.1. I did the upgrade through the Windows store. There are no errors or problems during the upgrade.

  However: The host machine equipped with a Qualcomm E2200 network adapter, and it runs the 'Killer' Network Manager software called at startup. After the 8.1 update, when the machine did its last restart, Qualcomm Network Manager opened with a message that the LSP has not mapped correctly. I clicked 'YES' to remap it. Probably a stupid move on my part.

  Thereafter, I lost all network connectivity in all my virtual machines. I have virtual machines for Windows 8, Windows 8.1 RTM (not the preview) and Ubuntu 12.04 LTS. ALL of them have lost the network.

  The host computer has no network problem and works well after the upgrade.

  Any ideas or suggestions to reset network connections in virtual machines?

  All virtual machines are set to use NAT.

  Oh I have to say also that the host computer is running VMware Workstation 10 and everything was fine and dandy, has never had problems at all until this upgrade/LSP remap thing. I have install VMware Tools in the VM of Windows 8.1, with no effect at all.

  Thank you.

  -J

  Two things, I'll try:

  1. go in the virtual network editor and restore settings. The culprit is probably the VMNet to NAT configuration.

  2. If this does not work, it seems that the virtual card for NAT does not somehow. The simplest workaround is to uninstall and reinstall the workstation.

• How can I pay for the reservation of memory on all virtual machines to "0"?

  I am trying to write a script that will pay for the reservation of memory on all virtual machines that are invited in a cluster to '0 '.  We have book too much memory, and this setting should allow VMWare facilities manage reserves memory for me.  I have hundreds of virtual machines to update, so I can't do it by hand.  I hope that it is possible via the CLI.

  Can someone help me with this please?

  Matt example work certainly, and I'm sure that he was going to follow up with something similar to this after having confirmed if it worked or not because it is much more serious on the optimization of code for speed, but I'll (try to) save the effort. To test its extract on a cluster of 45 VMS, it took more than four minutes to complete.  The excerpt below took about 25 seconds.  The difference is of course to use the cmdlet "Get-View" and that it can run asynchronously so (it begins a vCenter task and immediately passes the following).  Of course, this will also put more of a strain to your vCenter server, so keep that in mind.

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.memoryAllocation = New-Object VMware.Vim.ResourceAllocationInfo
  $spec.memoryAllocation.Reservation = 0
  Get-Cluster "YOUR_CLUSTER" | Get-VM | Get-View -Property Config.MemoryAllocation | %{$_.ReconfigVM_Task($spec)}
  

• Get-file provides an account of all virtual machines in the folder structure.

  Hi all

  Tried a few searches in the community, but impossible to find exactly what I was looking for.  We have a configuration folder structure in vCenter.  We have some companies that we bought over time and we set up a folder, separate them with a top-level folder and folders nested for different types of virtual machine below, something like:

  CompanyX

  -Mail servers

  -Web servers

  -DB servers

  For the purposes of internal billing, asked me to get a count of all virtual machines for each company.  I can get the count for virtual machines directly in the "CompanyX" folder, but it does not include virtual machines in subfolders.  This is the script I used so far:

  Write-Output "VM enumeration for CompanyX VMware environment Total: $((Get-dossier 'CompanyX' |)). "(Get-VM) .count) | out-file "D:\ScriptResults\CompanyX.txt" - append

  As I said, that works very well for the virtual machines in the head in the parent folder, but it does not go down to the next layer.  Is there a way to get folder do that?

  I am a novice PowerShell/PowerCLI, so forgive me if I'm missing something obvious.

  Thank you

  Bob

  Hi Bob,

  I don't know if it was different in previous versions, but in the latest PowerCLI version 4.1 U1 if you

  Get-file "CompanyX" | Get - VM

  It will retrieve the VM in the top folder and all subfolders. You can easily check this with:

  Get-file "CompanyX" | Get - VM | Select-Object - Property Name, folder

  If you only want the virtual machine in the top folder you can use:

  Get-file "CompanyX" - NoRecursion. Get - VM

  The following script will get the VM number for all companies and write the result to a .csv file.

  $ExcludeFolders = "Discovered virtual machine","other folder to exclude"
  Get-Folder vm | Get-Folder -NoRecursion | `
  Where-Object {$ExcludeFolders -notcontains $_.Name } | `
  ForEach-Object {
    $Folder = $_
    $Report = "" | Select-Object -Property Company,"Number of VM's"
    $Report.Company = $Folder.Name
    $Report."Number of VM's" = ($Folder | Get-VM | Measure-Object).Count
    $Report
  } | Export-Csv -Path CompanyVMsCount.csv -NoTypeInformation -UseCulture 
  

  If there is high records of the page you want to exclude from the list you can add them to the $ExcludeFolders variable in the first line of the script. The second line of the script gets all the 'vm' top of the folders page. The third line filter unwanted records. A few lines create the output objects. And the last line written objects in a .csv file.

  I added the Measure-Object cmdlet for the ($Folder |) Get - VM | Measure - Object). Account because otherwise you will get an error if the number is 0 or 1.

  Best regards, Robert

• All virtual machines are dead

  Hi, I discovered today that all virtual machines on my ESXi 4 has been arrested.  There are balls I can check what happened?  4 virtual machines are all CentOS 5.5 64-bit and very lightly loaded (IE TOP shows 0.1 for loading).  There is no more validation of CPU or memory.

  You can... How to do this depends on your configuration... For example, if you use vCenter or not. If this isn't the case, then connect to the host, go to the tab "Configuration", under the heading 'Software', ' Virtual Machine Startup/Shutdown ' select and then click on the 'Properties' link (top right of this window)... This is where you can select the VM power on with the host country, what order they put under tension, or if they "Manual start" value when the host starts.

  If you do the settings on the host computer, vCenter will extract these settings in the configuration... I would suggest testing to confirm that the auto-start settings stick when you vMotion a computer virtual to another host (if you have more than one host) or not.

  Network administrator

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!