VMware player + modem

Similar Questions

• Portege R - 400 3 G modem freezes VMWare Player 3.0 in Windows 7

  Hi all

  I have a problem following needs your help.

  I have a Portege R-400 with 3 G build-in modem. It is installed Windows 7. All is well until I install the VMWare Player 3.0.

  Without modem 3G connection, each application still works fine. (I use WiFi most of the time.)

  When I'm not in measure use WiFi and connect with 3G, without starting VMWare Player, the system freezes within 5 to 20 minutes.

  The symptom is without any response to the keyboard and mouse, but can see HD light flashing.

  Then, I'll try Virtual PC from microsoft. He may have the same problem, too.

  It will be very appreciated if there is no solution for this problem.

  Thank you very much!
  Mike

  Dear Mike is a rather complicated question. I mean Toshiba muss well deliver books and work with the factory settings, everything should work fine.
  If you use some third-party software of the part and if something goes wrong, it can be really complicated.

  Who is responsible for support here?
  I hope that someone on this forum has exactly the same specifications, the setting, the operating system and additional software like you and can help you with this.

• Do I need work station to modify USB devices? You can also VMware Player...

  That's what I would do:

  Install VMware Player on Windows 7 evaluation version

  I have to configure a modem USB (ISDN-telephone line)

  Can I add this USB device to my virtual guest later in VMware Player?

  I feel like the installation of VMware Workstation for just add this USB device installation. I have no experience of using VMware Player. I've always had of VMware Workstation to support me in everything I've done, that's why I ask.

  I can only imagine that maybe VMware Player will limit to deal with the addition of devices/units, but what is the truth?

  Peripheral USB themselves act as plug-and-play.  As long as you have configured the virtual computer to have a USB controller and have installed the drivers (via VMware Tools) in the comments, you can attach any USB device to the guest with workstation, player, server, Fusion, etc..

  Workstation already includes the UI player interface so that you can test your VMS how they will be displayed to users who have installed Player.  There should be a shortcut installed for it.  You can run your VM via player INTERFACE and to answer to your question here, I think.

• VMWare Player

  Pavilion g6 1201-tx. QG470PA #ACJ.

  Windows 7 64-bit.

  2nd gen i5 2430 M 2.4 GHz, Intel HD 3000 + AMD Radeon 6470 M 1 GB HD.

  640 GB HARD DRIVE. 4 GB OF RAM.

  I want to install Linux on my Windows 7, but using 'VMWare Player '.

  If I install Linux with VMPlayer, it will have negative effects on my laptop hardware, Windows 7 and the sustainability of the laptop? Because VM consumes a lot of resources, so will advise me on this subject?
  
  IMP: Can I activate "Virtualization" of CPU via the BIOS settings?

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  The VMware FAQ details the requirements for VMWare.
  
  http://www.VMware.com/products/player/FAQs.html
  
  The processor and RAM already exceed requirements, so it shouldn't have a negative effect on performance. VMWare Player will not affect on real hardware. This depends on the version of Linux used because it must be enough RAM for the host (Windows 7 64-bit) operating system and the guest OS (Linux). 4 GB of RAM should be plenty for the operating systems run, but you can find some RAM intensive programs may have reduced performance. For most programs, this shouldn't be a problem.
  
  Other virtualization technologies require virtualization is enabled in the BIOS. However, the FAQ does not mention this. If this does not work and you receive an error on activation, then enable it in the BIOS.

• You want to know how VMware player has demonstrated in supporting printer HP LJ P1100w USB devices for example.

  Original title: VMWARE Player, what went right?

  All of a sudden, VMWare Player [Win XP it] recognized and installed my printer HP LJ P1100w.  This, after being informed by them, by phone, that this freebie version does not support any usbs in addition to human and internal interface.  So, I decided to try to install my Deskjet 5400. I got a download HP upgrade package, uninstalled the existing software and Lo! VM has ask me to cut the host device and install it. Test page printed.

  What I want to know, since I can't get the response from VMWare, is how is it? There have not been updated for ages.

  Anyway, this avoids everything that copy/paste, drag and drop and no quality control before submitting the. PRN to Frogmore Rawprint.

  Hello

  VMware technical support technicians will be better placed to provide you with information:

  Assistance to Support VMware

  Hope the helps of information.

• My attempts to run VMWare player v4 ends by, "VMWare player cannot be installed on this computer.

  Where is my VMWare

  My attempts to run VMWare player v4 ends by, "VMWare player cannot be installed on this computer. VMWare player requires not on your CPU. "See the notes product for hardware and software configurations specific.  VMWare player v4 has been previously on my computer which, for about a month, has not if used causes of unemployed in the city. When I went to use the PARALLEL machine, it wasn't there. I went to the website and charge VMWare player v4 and tools for this. The above message appears with a reading of Kael'thas window, it of a FLP file and needs internet to find a site to open it. I downloaded Free File Viewer that gave no results. I'd be happier than a pig in the cool mud to fix this problem. Thank you for any assistance.

  Looks like a BIOS setting may have changed (in terms of virtualization).

  Unlikely a Windows problem.

  Uninstall VMware Player.  Restart the computer.  Download the latest version of VMware Player (save to your computer) and install it.  Restart the computer.  Try to run it.

• WARNING: Simulators fail to boot into VMWare Player 5.0

  We recently discovered that our simulators PlayBook BlackBerry and BlackBerry 10 Dev Alpha fail to boot into VMWare Player 5.0.  We are working a fix as we speak.  In the meantime, avoid this upgrade to continue to use these simulators.

  3 SDK is available for devices BB10. SDK 2 is for the PlayBook. 3 SDK for the PlayBook will be available around February 2013.

• How to download and use my Win 7 Pro prior in a Virtual Machine in VMWARE PLAYER?

  before 3 years, I bought a win 7 pro PC - recently, I fee install 8.1... How to download and use my prior Win 7 Pro in a Virtual Machine in VMWARE PLAYER?

  Unfortunately, you must have prepared a recovery disk in advance or use the one provided with your computer.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Guy Android coming to BB. Installation with VMWare player/Simulator/SDK issues

  I installed it,

  C/C++ QNX Momentics IDE...installer-bbndk-BB10_0_04-win32-186-201204250810-201204251322.exe
  BlackBerry10Simulator... BlackBerry10Simulator-Installer-BB10_0_04-195-Win-201204262359.exe
  VMWare... VMware-player-version 4.0.3 - 703057.exe

  I go to the early stages of QNX Momentics IDE and try opening an example (SDK)
  I get the Setup Deployment Wizard. I go to Device Setup and choose Simulator.
  What should I do now? The last step click the HELP (?) says he launched the Simulator, but I get a page with the title "Blackberry Simulator is not found and it's looking for a file VNX. I checked and tripled check the previous steps on the help icon.

  The Simulator is deadlocked C:\Documents and Settings\User1\My Documents\Virtual Machines\BlackBerry10Simulator-BB10_0_04. And I clearly see a BlackBerry10Simulator.vmx file in there
  but the SDK app doesn't see a single VMX file. The folder 'controllers' and other records.

  I tried the VMWare Player. It works very well.

  What I am doing wrong?

  Hey be based,

  The initial installation of the IDE and Simulator can be sometimes a bit daunting. Some of these steps you've done but im going anyway to list them:

  1. raise some Code by signing keys: keys

  2. download and install Momentics IDE and install

  3. download and install Blackberry Simulator

  4 download and install VMWare

  5 disable all firewall programs including windows firewall

  6. open VMWare-> choose open a Virtual Machine-> access your VNX file and open it

  7 if it opens really slow try changing options in VMWare 2 CPU and see if you can activate the "Virtualization technology" or "AMD Virtualization" in the BIOS

  8 the address of development of the Simulator (click the icon of the person with the toothed wheel on the menu bar of your alpha dev Simulator

  9. open the IDE, click window > Preferences on Windows and select BlackBerry and click BlackBerry Setup Wizard Deployment.

  10. follow the onscreen instructions to set up your target (Simulator or device) and add your chips of the device debugging.

  11 A this point your simulator could not auto discover so add your IP address you found earlier and if you haven't added a password in your simulator then let empty password.

  12. the rest of the wizard of BlackBerry deployment configuration should work just fine.

  13 open a sample application

  14. click on the file of the bar - descriptor.xml in the Project Explorer view, and then select "Set of symbolic debugging.

  15. right click on the project file, and then select Configurations to Build > Set Active > 4 Simulator-Debug

  16. right click on the project file, and then select generate the project.

  17. then right click on the project again and select run as > BlackBerry Application C/C++

  18. If all goes well, everything should work from there.

  Remember you need to do 14-17 for each project you want to run through the Simulator. And always turn on the virtual machine before you start the IDE I found that things always work better that way.

  I hope this helps!

• BlackBerry playbook Simulator suspends on VMWare player

  I installed the BlackBerryPlayBookSimulator-Installer-1.0.8-6067-Win-201112052354 on windows7 and try to play on the VMWare Player that it suspends like on the image below...

  Help, please...

  

  Hello world

  I solve this problem by booting in Safe Mode. I dnt know why requires it.

• PlayBook Simulator beta (Win) v0.9.3 - cannot install in VMware Player

  Hello everyone. I am fairly new to this programming PlayBook and have to face a frustrating problem. I installed the earlier version and have been more or less successful in programming.

  However, with the new version, I am unable to install the Simulator in VMware Player. I have uninstalled, reinstalled, re-downloaded and re-installed, etc. and continue to have the following in the on-screen display in the last step of the installation of the virtual machine.

  In the earlier version, the display shows - loading of the neutrinos... and proceeded to complete the installation.

  In this version the display shows - loading installer... .and poster cd/EULA.txt in the bottom of the first screen scrolling text. I can scroll up and down and display a lot of text but nothing continues or finishes the installation of the virtual machine.

  I would like suggestions.

  BTW, my system is Windows 7, 64-bit, 6 GB memory, 800 GB of disk space.

  Thank you in advance for any help you can provide.

  Terry

  It is (very) difficult.

  Do not press the "enter" or the arrow key down.

  You should stop to support anything at all times when only a few lines of text to the left.

  Then down one line at a time. Otherwise your entry extra will be interpreted as

  your answer to the question who is supposed to be 'y '.

  You will be successful after trying several times.

• Install ACS 5.3 on VMware Player?

  I get an error when you install ACS on VMware Player (not VMware Workstation).  The error is "sda drive specified in the score command that does not exist."  I found this: https://supportforums.cisco.com/thread/201443 which says to use the LSI instead of BusLogic adapter.  The problem is, I don't have this option when creating a new HARD drive or when I go into the advanced settings after you create the new HARD drive.

  Is it possible to install ACS 5.3 in the free version, VMware Player?  Maybe there's some magic .vmx that someone found...

  Thank you!

  Sorry for the bad link. Updated above and here it is again:

  https://supportforums.Cisco.com/thread/2166663

  HTH

  Amjad

  You want to say "Thank you"?
  Ne. Just note the useful responses,
  It is more useful than 'thank you'.

• Allows users not able to connect to the server through Vmware Player Flex

  Hi all

  I created a Horizon Vmware server with Flex. Created Windows Image and saved the VM in the Flex web console. The configured policy and gives the right to some windows domain users to use this Image.

  I created a group called "Mirageadmin" and added two users in this group. Mirageadmin belongs to a group of Administrators local and also added to the Administrators group in the console of Mirage . These two users can connexiona Horizon flex web console.

  My problem is that when the user right connect to the server through Vmware Player Flex, its list of username or password is incorrect, please try again. But the user name and password is correct. Later one of the user added to the Mirgaeadmin group policy gives right I. While this user can connect to Flex server via Vmware Player.

  
  

  1 should. users entitled be part of the local administrator group of the Flex server?

  2. do I need to add these users right somewhere in the console of mirage?
  

  Thanks for supporting.

  Hi all

  Turn history on security locally should be set in the server included users who try to connect via Vmware Player.

  Our GPO has been tighten to allow only to administrators and users authenticated to allow log on locally. Adds a new GPO to enable a group of users to log on locally, which solve the problem.

• Help, please! -Error fatal VMware Player: NOT_IMPLEMENTED bora\lib\pollDefault\pollDefault.c:3914

  Hi all

  Since I installed VMWare, I have had problems with my VM. It crashes about twice a day with the error below. Sometimes, it's a different vthread crashing, but it's still the pollDefault NOT_IMPLEMENTED error. I'm at my wit's end and could use very little help.

  Fatal error VMware Player: (vthread-10)

  NOT_IMPLEMENTED bora\lib\pollDefault\pollDefault.c:3914

  My host OS is Windows 10 Home x 64 I upgraded Windows 8, when I bought my laptop. The guest operating system running Windows 7. I'm using VMWare Workstation Player 12. I was previously using Workstation 11 upgraded to 12 player in hopes that would resolve the error. Of course, this thread shows that the problem remains.

  Attached are my journal and vmsupport ZIP file.

  Any help would be greatly appreciated. Thank you!

  Well, I found myself just switch to VirtualBox instead. Have not fallen since.

• Can I have VMWare Player and Virtual Box to the same PC?

  Can I have VMWare Player and Virtual Box to the same PC?

  Can perform the same two times?

  Hello

  Yes, that's correct.

  --

  Wil