WARNING: Simulators fail to boot into VMWare Player 5.0

Similar Questions

• Creative cloud Installer fails to boot into OSX Mavericks

  Creative cloud Installer fails to boot into OSX Mavericks. Any ideas?

  Hi LoganCallWeb,

  You can try to reinstall the Adobe application manager. Go to the HD > library > application support > adobe > caps and rename the folder of caps. After you rename this folder, go to the USER library > application support > adobe > OOBE and rename the OOBE folder as well and install Adobe application manager at the bottom of the link. It should work fine.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4774

  Let us know if it helps.

  Kind regards

  Ashish

• Can I export data store files and import them into VMware Player?

  Hey guys,.

  I was wondering if this outcome is possible?

  I want to create a virtual machine (install the OS and software) and then export the virtual computer to use VMware Player or any viewer VM?

  Currently, I have ESXi 3.5 and can create virtual machines. I'm not able to find a way to simply export the virtual machine. Is this possible? If this isn't the case, I was wondering if it was possible to export the files in the data store, and then copy them to the VMware Player?

  The files in the data store (vmx, vmdk, nvram, vmxf, vmsd, vswp)

  Thank you!!!

  You can use the free VMWare Converter Standalone (available here: http://www.vmware.com/download/converter/). Use your ESX as target and convert the virtual machine to a VMWare Workstation. I've never tried, but I think it will work.

  Marcelo Soares

  VMWare Certified Professional 310

  Technical Support Engineer

  Chief Executive Officer of the Linux server

• ASUS motherboard fails to boot into windows

  I have an ASUS Z97 - A motherboard that I am trying to load a Windows XP PRO OS I have used successfully on several other computers. The software seems to load, but stop at "Windows Setup" and "the Setup is starting Windows" and freezes there.

  ASUS claims that it is a Microsoft problem and that I should contact them. I'm still waiting for a response.

  Can someone help me?

  What you can try (see the user's guide) is to disable UEFI and use legacy / IDE mode.

  J W Stuart: http://www.pagestart.com

• Vmrun fails with VMware Player

  Hello

  I am currently using VMware Player version 7.1.2 and VIX version 1.13

  I want to start my VM using vmrun VIX, unfortunately when I type in the command line, the following command:

  departure of player vmrun t 'D:\myUser\VMWare\Windows7\Windows 7.vmx '.

  It will give me something like this:

  Unable to connect to the host.

  Error: The specified version is not found

  I'm doing something wrong or is this a bug?

  For the mention I don't want to not buy or even to install VMware Workstation as I had a lot of trouble with it in the past (I had to do a system restore to get rid of) uninstall.

  OK, managed to make it work, here's how:

  1) there is a vixwrapper config.txt file in the folder VMware\VMware VIX. Make a backup and overwrite the following on the content of the file:

  #@Version-Info
  #
  # VixAllProducts revision mapping for Workstation/Player
  #
  # This file translates product version specifications into the appropriate Vix
  # implementations.
  #
  # Each @Version-Info line has 5 white-space seperated entries:
  #
  #    provider-type: ws, esx, viserver, etc
  #    apiVersion: the apiVersion supported, as passed in from VixHost_Connect()
  #    ipc-type: none, vmdb, vmodl, cim
  #    product-version: the product version string
  #
  #    implementation-directory: the path to the library that implements the
  #          version described by the first 4 parameters
  #
  #
  # The configuration is based on the first 4 fields, which describe
  # the product.  The 5th field is the location.  To force it to try
  # multiple location, the same configuration can be repeated.  Note that
  # list is built in LIFO order, so the latest entry in the configuration
  # will be the first used.  If for some reason that value fails, it will
  # continue through any other matches.
  
  # Workstation 11.1.2 and Player 7.1.2
  ws        17  vmdb  11.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  player    17  vmdb   7.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  ws-shared 17  none  11.1.2 Workstation-11.0.0-and-vSphere-6.0.0
  
  # EOF
  

  (2) if there is a folder named "workstation - 11.0.0 - and-vSphere - 6.0.0" then move elsewhere as a backup

  (3) make a copy of the folder "Desktop - 10.0.0 - and-vSphere - 5.5.0" and name it:

  Workstation - 11.0.0 - and-vSphere - 6.0.0

  (4) do not forget to add the vmrun path to the variable user: PATH (the vmrun path should be something like this: "C:\Program Files (x 86) \VMware\VMware")

  Now the vmrun commands should work.

  The following command opens the virtual machine:

  departure of player vmrun t 'D:\myUser\VMWare\Windows7\Windows 7.vmx '.

• MSI failed on the latest version of VMware player

  I use Vista 64 Ultimate.  When I use "run" and add the z switch, as follows

  'Action '=' install', VMware-player-3.0.0-203739.exe/z * I keep on getting error MSI failed. All of the suggestions.

  It is said 'The MSI C:\Users\Username\AppData\Local\Temp\vmware_1259165632\vmwareplayer.msi' failed.

  Thanks in advance.

  random tips that may help...

  Redirect %tmp% into C:\temp - make sure that it has at least 200 MB of free space

  Rename the file VMware-player-* .exe 'buggy.exe '.

  disable any firewall programs and Antivir

  kill a process running called webcam.exe if yopu have such a process

  don't forget to login as administrator and use "run as Administrator".

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• VMware Player 126130 x86_64 RPM fails to start F10

  Hello

  I just installed a new Fedora 10 on my box.

  I can start is no longer the VMware Player: he moved very well (do not notice when the system language is bg_BG, but OK after ' export LANG = en_US), but I can't seem to be able to start the VMware services:

  # /etc/rc.d/init.d/vmware start

  Starting VMware services:

  Virtual machine monitor

  Virtual machine communication interface

  Block file system

  Virtual Ethernet

  And therefore:

  vmplayer $

  Xlib: extension "RANDR" missing on display "localhost:12.0".

  Login to /tmp/vmware-kgeorge/setup-17541.log

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  / usr/bin/vmplayer: line 31: 17541 Segmentation fault (core dumped) "$BINDIR" / vmware-modconfig - appname = 'VMware Player' - icon = 'vmware-player '.

  Yes, me too.

  openSUSE 11.1

  VMware-Player - 2.5.1 - 126130.x86_64.rpm

  4G: / home/promo # vmplayer

  Login to /tmp/vmware-root/setup-2668.log

  (vmware - modconfig:2668): Gtk-WARNING *: could not find the theme engine in module_path: "qtcurve."

  {/ usr/share/themes/Clearlooks/gtk-2.0/gtkrc:72: error: unexpected identifier 'colorize_scrollbar', the expected character '}'

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  / usr/bin/vmplayer: line 31: 2668 Segmentation fault "$BINDIR" / vmware-modconfig - appname = 'VMware Player' - icon = 'vmware-player '.

  VMware - config.pl is no longer available

  It seems that all the modules are compiled but there are problems with the new kernel new

• VMware Player 6.0.6 does not start under UBUNTU 15.04

  Hello everyone,

  After installing UBUNTU 15.04 (from 14.10), I have a problem to start VMware-Player.

  UBUNTU: Linux ubuntu 3.19.0 - 16-generic # Ubuntu - 16 SMP Thu Apr 30 16:13 UTC 2015 i686 i686 i686 GNU/Linux

  VMWare-Player: 6.0.6 32bits

  With UBUNTU 14.10, I had no problem and was able to create some customers. Now, after launching the player, I get the following error:

  "Before you can run VMware, several modules must be compiled and loaded into the kernel running."

  After press INSTALL 'virtual network device' will be set up, but without success. This is the last - entered in the log file:

  ...

  2015 05-06 T 11: 39:57.850 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

  2015 05-06 T 11: 39:57.854 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2015 05-06 T 11: 39:58.177 + 01:00 | vthread-3 | I120: The setting for vmnet destination path to ' / lib/modules/3.19.0-16-generic/misc/vmnet.ko '.

  2015 05-06 T 11: 39:58.177 + 01:00 | vthread-3 | I120: Extraction of the source vmnet "/ usr/lib/vmware/modules/source/vmnet.tar".

  2015 05-06 T 11: 39:58.189 + 01:00 | vthread-3 | I120: Extract successfully the vmnet source.

  2015 05-06 T 11: 39:58.190 + 01:00 | vthread-3 | I120: Module construction with the command ' / usr/bin/make - j2 - C/tmp/modconfig-vWFAYZ/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.19.0-16-generic/build/include CC = / usr/bin/gcc IS_GCC_3 = no ".

  2015 05-06 T 11: 40:03.120 + 01:00 | vthread-3 | W110: Impossible to build vmnet.  Cannot run the command build.

  I tried to fix it with the following commands (copied from the discussion Workstation 11 cannot be installed under Ubuntu 15.04)

  Step 1: sudo s

  Step 2: Enter your Root password.

  Step 3: Enter these commands:

  cURL http://pastie.org/pastes/9934018/download o /tmp/vmnet-3.19.patch

  CD/usr/lib/vmware/modules/source

  tar - xf vmnet.tar

  patch - p0-i /tmp/vmnet-3.19.patch

  MV vmnet.tar vmnet.tar.SAVED

  tar - cf vmnet.tar vmnet-only

  RM - r vmnet-only

  VMware-modconfig - console - install-all

  = > NO SUCCESS: the results (excerpt) of the last command above:

  /tmp/modconfig-5zKLAX/vmnet-only/Netif.c: in function 'VNetNetIf_Create ':

  /tmp/modconfig-5zKLAX/vmnet-only/Netif.c:152:64: error: 'alloc_netdev' macro requires 4 arguments, but only 3 given

  dev = alloc_netdev (sizeof * netIf, deviceName, VNetNetIfSetup);

  ^

  /tmp/modconfig-5zKLAX/vmnet-only/Netif.c:152:10: error: 'alloc_netdev' undeclared (first use in this function)

  dev = alloc_netdev (sizeof * netIf, deviceName, VNetNetIfSetup);

  ^

  /tmp/modconfig-5zKLAX/vmnet-only/Netif.c:152:10: Note: each identifier not declared is reported only once for each function it appears in

  /tmp/modconfig-5zKLAX/vmnet-only/Netif.c: at the highest level:

  /tmp/modconfig-5zKLAX/vmnet-only/Netif.c:85:1: warning: 'VNetNetIfSetup' defined but not used [- Wunused - function]

  VNetNetIfSetup (struct net_device * dev) / / PO:

  ^

  scripts / Makefile.build:257: recipe for target ' / tmp/modconfig-5zKLAX/vmnet-only/netif.o' failed

  make [2]: * [/ tmp/modconfig-5zKLAX/vmnet-only/netif.o] error 1

  make [2]: * Auf noch nicht processes wird going going...

  Makefile:1394: recipe for target ' _module_/tmp/modconfig-5zKLAX/vmnet-only' failed

  make [1]: * 2 error [_module_/tmp/modconfig-5zKLAX/vmnet-only]

  make [1]: leaving directory ' / usr/src/linux-headers-3.19.0-16-generic'

  Makefile:130: doesn't have a recipe for target 'vmnet.ko '.

  make: * [vmnet.ko] error 2

  make: leaving directory ' / tmp/modconfig-5zKLAX/vmnet-only.

  Who is able to help? Remember, there is an error in the vmnet - 3.19.patch, but I am not an expert to check it out.

  Thanks in advance for every answer.

  Hello mmccurdy,

  Thank you for your message. But due to the fact that I use Ubuntu 15.04 in 32-bit version, it is not possible to install the bundle - x 64 drive.

  After searching a few other items, I found the solution now (you can find the entire instructions under http://rglinuxtech.com/?p=1281

  First steps:

  cURL http://pastie.org/pastes/9934018/downloadhttp://pastie.org/pastes/9934018/download o /tmp/vmnet-3.19.patch

  CD/usr/lib/vmware/modules/source

  tar - xf vmnet.tar

  patch - p0-i /tmp/vmnet-3.19.patch

  After changing driver.c and userif.c, it is necessary to change too NETIF. C in the vmnet-only folder as follows (see original under http://rglinuxtech.com/?p=1184)

  all about line 152:
  dev = alloc_netdev (sizeof * netIf, deviceName, VNetNetIfSetup);
  to do this:
  dev = alloc_netdev (sizeof * netIf, deviceName, NET_NAME_UNKNOWN, VNetNetIfSetup);

  Complete the changes to the file are VMNET-ONLY. Now the final stages:

  MV vmnet.tar vmnet.tar.SAVED

  tar - cf vmnet.tar vmnet-only

  RM - r vmnet-only

  VMware-modconfig - console - install-all

  then VMwarePlayer works very well.

  Used with:

  Linux ubuntu 3.19.0 - 17-generic #17 - Ubuntu SMP Wed May 6 16:46:32 UTC 2015 i686 i686 i686 GNU/Linux

  VMware-Player 6.0.6-32-bit

• Server 2012R2 Lenovo ROK fails to intsaller to vmware

  I'll put up the new RD630 with 2012RD (lenovo ROK) on Vmware server

  If fails to install as recognized Lenovo hardware... support sent a link to change the data store. I'm relatively new to Vmware, does anyonehave step by step instructions to change the configuration?

  Here's what they sent:

  https://support.Lenovo.com/us/en/products/servers/ThinkServer-rack-servers/ThinkServer-RD630/solutio...

  It's getting into vmware, choose the virtual machine and change the configuration settings, add a line, and enter SMBIOS.reflecthost = "TRUE". It was my steps:

  1. Launch the hypervisor
  2. Click on Virtual Machine
  3. Click on change Virtual Machine properties
  4. Click Options, click general
  5. Click on Configuration settings
  6. Click Add a line
  7. Enter SMBIOS.reflect.host the right pane in the left pane and TRUE
  8. Click OK

  You will now be able to install the version of Lenovo ROK of the server 2012R2

• BlackBerry playbook Simulator suspends on VMWare player

  I installed the BlackBerryPlayBookSimulator-Installer-1.0.8-6067-Win-201112052354 on windows7 and try to play on the VMWare Player that it suspends like on the image below...

  Help, please...

  

  Hello world

  I solve this problem by booting in Safe Mode. I dnt know why requires it.

• Install ACS 5.3 on VMware Player?

  I get an error when you install ACS on VMware Player (not VMware Workstation).  The error is "sda drive specified in the score command that does not exist."  I found this: https://supportforums.cisco.com/thread/201443 which says to use the LSI instead of BusLogic adapter.  The problem is, I don't have this option when creating a new HARD drive or when I go into the advanced settings after you create the new HARD drive.

  Is it possible to install ACS 5.3 in the free version, VMware Player?  Maybe there's some magic .vmx that someone found...

  Thank you!

  Sorry for the bad link. Updated above and here it is again:

  https://supportforums.Cisco.com/thread/2166663

  HTH

  Amjad

  You want to say "Thank you"?
  Ne. Just note the useful responses,
  It is more useful than 'thank you'.

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• Cannot install VMWare Player, workstation or anything like that

  All appear to be the same way with a message like:

  

  However I've checked that the file exists and that I can access. What is the problem?

  I had VMWare Player 6.0.5 and could not install/update VMWare tools. So, I suspended my operating system prompted and rebooted VMPlayer. He told me that there is a new VMWare Workstation something 10.x and I wanted to upgrade to it. Okay, of course. Downloaded the update and tried to install. Said to uninstall VMWare Player 6.0.5. Being suspicious, I went and downloaded VMWPlayer 6.0.5 where he screwed up the installation of Workstation 10.0. Of course, he did. So I tried to install Player 6.0.5 so I could return to my suspended VM. In my opinion, what he said that I could not install because I haven't restarted. So I rebooted. Now, I can't install Player 6.0.5 or Workstation 10.0.0 or whatever it is. They all fail on the same way saying the cannot find a .msi file I can find and access.

  Help!

  BTW, you guys have far too much product and names making it confusing. What should I use? Player? Workstation? Spear? vCenter, Fusion. The list goes on and. Do not try to give me the list of "well it's for this reason and this other thing". The point is there are too many products and it is too complicated. If you want to tell me what the structure of the product is just limit it to the product I should use. I have a Windows 7 box and you want to run Ubuntu in a VM desktop - that's all...

  Thank you.

  Hello

  Please note that this is a forum for peer support and therefore, it is mainly users of VMware help other VMware users who make up the bulk of this forum. It is VMware employees responding in time in time, but in your case here (Note: VMware employees are recognizable because they have a small 'vm' next to their name logo)

  With regard to your current number. If you install VMware Workstation, then you have also installed VMware Player next.

  Even after the expiry of VMware Workstation, you can continue to use the free VMware Player.

  Hope this helps,

  --

  Wil

• Debian Linux Bootloader and VMware Player and Windows 8.1

  I installed VMware on laptop windows 8.1 and begins installation of Debian Linux.

  Warnings about partitions and especially the bootloader potentially make my laptop not boot gave me cold feet so I bypassed the charger installation of.

  At this point Windows system seems to be intact.

  So here's my question. If I come back and install the boot loader, boot linux OS only when I press on play on VMware Player or it will make windows unbootable?

  If the latter, how do I install the bootloader on a USB?

  Hi again, plc775!

  Severe warnings are because the operating system has no idea that it is inside a virtual machine comfortably insulated from the rest of your host.  As long as you created the virtual machine in a pretty normal way (for example, by using the instructions in your other post) and did not have something really unusual (for example, through a physical disk from the host to the virtual machine), hard disk of the virtual machine is quite secluded and the guest is unable to make your host does not start and you can go ahead and install this Bootstrapper on the hard disk of the virtual machine.

  (By the way, I noticed that you post in the forum VMware ESXi 5... I'll make both of your messages on the VMware Player forum, where they will receive a more appropriate audience.)

  See you soon,.

  --

  Darius

• VMWare Player freezes my ubuntu all 14.04

  I use VMWare player to run a Windows 7 comment system, and after a while, my whole system crashes, so I have to turn off my computer at hand.

  It happens all the time, sometimes sooner or later.

  The _usr_bin_signon - ui.1000.crash.zip you have attached shows that the signon-ui process failed when the function malloc detected that its data structures had been corrupted, and there is nothing in this process which makes use of any VMware components.  I'm not aware of any Player 6.0.4 defects that can cause corruption of the memory of this nature.

  My first guess would be that you have a hardware problem.  Please run the system diagnostics to ensure that your memory and processors are reliable.  My usual day to this end is the free Memtest86 +, even if it's been a few years that I've tried...

  Thank you

  --

  Darius