Vmware server Web Access 2 does not work

Similar Questions

• Portege R500 - TrueSuite Access manager does not work with IE 8

  TrueSuite Access Manager does not work with Internet Explorer 8

  Version:
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager 2.1.23.0

  Any idea?

  Thankx
  Robert

  Hello!

  Which laptop computer and operating system you have?
  And what do you mean with it doesn t work? You get an error message or something else?

  You must give us a little more information. Otherwise, we can t help you my friend.

  Good bye

• VeriSoft Access Manager does not work on Windows 7.

  VeriSoft Access Manager does not work on Windows 7. It worked on Windows Vista and 7 RC, but it now gives the error "this program blocked to compatibility problems. VeriSoft Access Manager is not compatible with this version of Windows. For more information, contact Cognizance Corporation. "He said that the problem file is AsGHost.exe. Any ideas how to solve this considereing that has worked in Windows 7 Release Candidate?

  This software is not yet compatible with Windows 7. I met the same problem. You must use different software to fingerprints. DigitalPersona works very well and can be downloaded from the HP website. Here is the link...

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?LC=en&DLC=en&cc=us&softwareitem=ob-56930-1

• Nested error Server R2 2012 - "hypervisor does not work.

  Good afternoon

  I'm having some trouble from a virtual computer inside my 2012 R2 VM server. I search around the internet for a while find several articles and forums on how to configure nested visualization including the official document on these forums but I still have a problem.

  My configuration:

  Physical server running - ESXI 5.5 1623387

  Physical machine - dell R720 (2 x e5-2690 - supports the VT - X and the EPT and it is enabled in the BIOS, esxcfg confirms with '3')

  New VM - Server R2 2012, VM version 9 installation (created by the web console vmx-09)

  I added / tried every configuration option I found:

  -J' created the virtual machine console web and checked "expose hardware virtualization assisted for the guest OS.

  -I made that vhv.enable = "TRUE" in the vmx configuration

  -J' tried to add hypervisor.cpuid.v0 = 'FALSE' to the vmx configuration

  -J' tried to add vhv.allow and more vhv.enable in the/etc/vmware/config, but neither makes a difference (discovered he was not necessary later thanks to a post on this forum)

  -J' tried to set the name of guestOS to "winhyperv" in the .vmx file

  -J' tried the type parameter of "ESXi 5.x" guestOS in the thick client

  -J' set the cpu/mmu virtualiztion tick at the last

  -J' tried to set the registry values level 1 as seen here ecx

  -J' have ensured that monitor.virtual_exec = "hardware".

  -J' uninstalled the hyper-v role and reinstalled after you make these changes without result

  -J' tried an another 5.5 ESXi 1331820 host with these settings and it does not work (VT - X confirmed as well)

  -J' tried 2016 instead of 2012 R2 server and it does not work

  I think it's all the things I tried. I'm sure I've probably missed something very obvious, but any help would be appreciated.

  This specific virtual machine has not generated a vmware.log file but still one of my virtual machines to test (with the same exact questions on the second physical host) has generated a couple and I enclose you one of them, and more can be provided if necessary.

  Thank you!

  Post edited by: Ian details price changes

  It seems that the latest Hyper-V does not like hardware virtual version 10.  However, it seems not be satisfied with version 11 of virtual equipment.

• Vmware Server 2 has expired, comments not working

  Hi people,

  I tested vmware these past two months to install it in the future to our customer base servers. I installed Vmware Server 2 in a Debian 4.0 to run Debian 4.0 guests, and my experience is good even a few crash problem cpu 2 (but this is another war...). I love the web administration and options are nice and soft.

  But, today, I have a problem and I feel scared to think what might happen if the server has been installed on client servers: I removed a snapshot and after he hung my VM 20 minutes I stop the server. Now, when I run the virtual machine, I get an expired product error (but I have vmware server 2-0?, see photo to fix on the foot message). I get an expired error if I create a new virtual machine too. At first, I suspected that the problem is a file locking or some accident of VM file, but I'm not sure, after I created the new virtual machine that does not work.

  Date and time are running OK, and I don't remember to change these last months. What should I do? I have losted information in my VM? These are the files in my server:

  -rw - 1 root root 1073741824 2008-11-27 02:20 564d1db6-137 a-863 c-9fef - 5702b66853f3.vmem

  -rw - 1 root root 104237826048 2008-12-04 00:40 clients1 - 000001.vmdk

  -rw - 1 root root 8684 2008-11-27 02:20 Clients1.nvram

  -rw - 1 root root 512 2008-12-03 18:36 Clients1.vmsd

  -rwxr-xr-x 1 root root 2428 2008-12-04 00:47 Clients1.vmx

  -rw - 1 root root 263 2008-12-04 00:47 Clients1.vmxf

  root drwxr-xr-x 2 root 4096 2008-10-27 16:03 stats

  -rw - rr 1 root root 60042 2008-12-04 00:47 vmware - 0.log

  -rw - rr 1 root root 60035 2008-12-04 00:26 vmware - 1.log

  -rw - rr 1 root root 60043 2008-12-04 00:11 2.log - vmware

  -rw - rr 1 root root 60042 2008-12-04 00:49 vmware.log

  I removed (I have a backup) the directories "564d1db6-137 a-863c-9fef - 5702b66853f3.vmem.lck" "clients1 - 000001.vmdk.lck. The problem exists with or without these directories.

  I enclose you a screenshot. Thanks in advance!

  

  Hello

  You're missing what they say, I'll try to explain.

  RC = Release candidate. (pre-release)

  GA = general availability (final version)

  The product cycle is generally as follows:

  Beta 1: duration limited

  Beta 2: duration limited

  Beta N: limited time

  RC 1: limited time

  RC 2: limited time

  GA: without time constraints

  Beta have a time constraint on them to ensure that support doesn't get bogged down support request non-final code, it also protects the client to run in an unsupported configuration.

  The final product version is not limited in time. 122956 version is the 2nd release of the GA version. So no RC2, but GA2

  If I'm not wrong then, GA1 was version 116503

  Here is an article which explains the publication of the whole software lifecycle more depth: http://en.wikipedia.org/wiki/Beta_version

  --

  Wil

• spool server says error signature does not work, can't restart, can't reload printers, missing icon

  Personal computer running Windows XP with two printers, HP Laser jet 1020 and Lexmark X 2250 works very well yesterday. Today, print jobs are back with the error signature telling me that my spool server does not work.  I went and tried to restart my spooler, no go.  Icons for missing print/fax printers program and I can not reinstall the printers.  Same message arrives, spool server does not.  How can I fix it.  I ran the difficulty it program, produced works and still nothing.  Help please!

  Hi Wendy,.

  It comes down at the end of the previous instructoins, so it of nothing to do but to remove and reinstall the printer, then follow these instructions to do this:

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Let us know.

  Best regards

  Matthew_Ha

• Windows server 2012 RDP Clipboard does not work for regular users

  Hello again,

  I wanted a little more secure our 2012 server.

  I disabled via GPO, local disk and printer redirection when a user connect through rdp.

  But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)

  Problem is that it works in only for the admin.

  The fact that local drive redirection is disable that copy / paste does not work?

  Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work

  and also, the process rdpclip.exe is running. I have restart this process.

  Any help or guide

  Thank you once again.

  Hello

  As I mentioned in your other Thread that we do not respond to server problems in this community.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Access list does not work

  unbenannt.PNG

  

  I want that no package would leave f0/0 (R2).

  Here is my configuration:

  R1:

  !

  interface FastEthernet0/0

  IP 192.168.1.1 255.255.255.0

  !

  R2:

  !

  interface FastEthernet0/0

  IP 192.168.1.2 255.255.255.0

  IP access-group 101 out

  !

  access-list 101 deny ip any one

  !

  Given the configs shown in the original post R2 will be able to ping to R1 and I guess this (or something very similar) is what brings the original poster said that the ACL does not work.

  The problem here is that a list of access applied on an interface will not process the traffic generated by the router itself. The illustrious ACL will be very effective in preventing transit traffic (traffic that came from somewhere to R2 and must be DISPATCHED f0/0). But it will not work on the packages generated by R2.

  HTH

  Rick

• Property of VMware Workstation 8 serial number does not work

  Hello

  I used to install WS7 issuing a command line like this:

  VMware Workstation.msi"/ qb! /norestart ADDLOCAL = ALL DISABLE_AUTORUN = 0 QUICKLAUNCH_SHORTCUT = 0 USERNAME = "xxx" COMPANYNAME = "xxx" SERIALNUMBER = "xxxx".

  Now, SERIALNUMBER has been removed from the msi properties table.

  Is it possible to have a solution for this other than the registration of import reg file?

  This issue has a lot of visibility with the devs, and we are working on implementing this properly in my computer.  For 8.0.1 users are able to configure shortcuts, port pass, serial key and persist / remove settings from the workstation through the command line, but we still have more work to do.  Still, some settings do not work and are not passed through. Currently INSTALLDIR and the features of REMOVAL does not work.

  But, you can indeed install w / serial number in the installation in silent mode starts now with Workstation 8.0.1.

  VMware-workstation-plein-8.0.1-528992.exe/s/v SERIALNUMBER = "xxxxx-xxxxx-xxxxx-xxxxx-xxxxx" works when it is run from an elevated command prompt.

• New download of vCenter Server Appliance 5.5 does not work?

  I have a client with a small two servers ESX environment into a cluster HA (5.1.0, 799733).  Recently, the 5.1 device they used for management began to have problems and rather than try to solve this problem the plan was to download the new device of 5.5 and just migrate to this.

  A few months ago, I downloaded the device (5.5.0.5100 - 1312297) and deployed.  The deployment takes place without incident, and he fired an IP address from the DHCP server.  However attempts to connect to this device via the web client or the vSphere client failed.  I could connect to the console and it showed started lighttpd but I couldn't always connect.  Play with it, I finally got the web connection works however SSL wouldn't connect to the machine.  After a lot of hacking on I disabled the SSL requirement and could not enter the web management, but by this point I had broken a number of things and was not confident in this system.

  Other questions came, and it has put on hold for a while.  Now, I try again.  I downloaded and deployed a clean machine (5.5.0.5101 - 1398493).  I have deployed it no problem and he pulled a DHCP address, but even when I can't connect to the web server on port 5480.  A glance at the lighttpd configuration file says it's the right port.  Before you start to play and probably break things again once someone has ideas what I might be missing that a device out-of-the-box does not load?

  -Kurt Montgomery

  All comments are my own and do not reflect the views of my employer or clients.

  Cool, and it is not something like a proxy in place? What browser are you trying? Using another browser help?

• There is a bar type to pass or web search that does not work after installation ver8. Meanwhile we for many sequence using the gogle search first, then go on the web that should be only type n with formla version before 8.

  I used a Firefox oldies until one day, she has been updated in the new version 8.0, then the access bar for research that has happened every time when I go to the website I do there and enter wasn't working more.
  I use Windows XP as an o/s, with Pentium dual core CPU.
  Finally, I used to tap on the Goggle search bar, entrance to enter the pint n research to go on the web I want.
  It make it difficult when in a hurry and make me upset.

  do not know who change the  search bar which is common to enter  web address on there and work excepted for this new Firefox 8.0.
  

  If any changes, please check and advice.
  Thank you
  Concerning

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Satellite M40-307: accessibility utility does not work with the limited user account

  Hello everyone,

  I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

  This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

  In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
  I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

  So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

  Hello

  Well, you should try to activate the rights for the TACSPROP.exe.
  To do this, you must enter the operating system as an administrator.
  Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.

• Satellite L650 (PSK1JA-07C017) - Web cam application does not work

  I have a client who owns the computer above and while I was there yesterday, she mentioned that the web cam is not working. I clicked on the icon and received a popup saying to upgrade or complete installation and after doing this the application still not open. I went to the support downloads section and got the enumerated here uninstalled web cam application the application of the computer.

  I re-installed with the application that I had downloaded ut that did not help. The same behavior was exposed. I googled a little and I saw many enties from others so I came here to have this problem, but no solutions.
  Any help would be appreciated.

  Sq

  > A full installation of operating system due to a failure of the application and judging by the results of google search a known issue that should have a fix now.

  This could be a software problem I mean it is possible that the system could be confused to you that it is not impossible? In my short life, I noticed several times this dirty registry may cause issues such as

  > I have installed with the application that I had downloaded ut that didn't help
  Well, maybe you should try to clean the registry using some tools such as CCleaner for example before you install the driver if this is not enough, then I would try to reinstall the image of Toshiba

• Trial/reviews VMware 2.0 space key does not work?

  Hello

  I registered and download the workspace of VMware 2.0 today. When going through the workspace configuration wizard, it request license key. the wizard does not have the key to the trial, I received from vmware.com.

  is this a problem for the my key? or is there a problem for something else?

  any help with this will be appreciated.

  Thank you

  The license key that you get when you ask a Horizon of VMware (with view) should work. This assessment gives you a set of keys, please also use the key for VMware Horizon discovered 6.x for workspace 2.0.

  My apologies for the problem, we will look at fixing this as soon as possible.

• & quot; the server behaviors & quot; sign does not work

  I want to create a directory protected by password. (Later, I want to create a donate"button now".) I finally understood that the plus sign in the Server menu behaviors did not work because I had not created a dynamic page, so I created one in .jsp (this is what my host said to do). But then the server behaviors menu wants me to create a site, choose a document type and set up a test server. I guess the site is the same that I am, and I have chosen JSP for the type of document, but how in the world I set up a test server? Is there a tutorial somewhere for that? I have access to several tutorials and they show you how to create forms, but none ever made allusion to the existence of dynamic pages - it's a completely different universe that I didn't even know that I had to enter in order to have shapes that worked. Thank you.

  How many logins and passwords you have Setup.
  If try to password protect a directory, you do not need to use DW server behaviors. Connect to your host control panel and see if you have an option to password protect a directory. If you do not, contact your host and ask them.