Nested error Server R2 2012 - "hypervisor does not work.

Similar Questions

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Server certificate 2012 R2 autoupdate not working

  In Windows Server R2 2012, certificates are not automatically being updated therefore with question as 'unknown Publisher '. I tried to install the same application in other machines with 10 Windows and Windows 7 and I can see Publisher name correctly.

  I tried to install the certificate manually in server R2 2012 but certificate still shows the old information (validity). Please guide me what the rule of firewall and service causing this error and how can I update manually or by windows update.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error: The Service of Audio does not work

  I get a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I receive a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Wdjpgh,

  1. did you of recent changes on the computer?
        
  Method 1:

  First of all, make sure that the Windows audio service is running on the computer.

  a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right click on Windows Audio serviceand then click Properties.
  d. under the general tab, next to startup type, make sure that Automatic is selected.
  e. also make sure that the service is started

  Method 2:

  If there is still no sound after you enable the Windows audio service, then check out the link below and run the troubleshooter and check if it works.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:

  If the previous step fails, then you will need install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: visit the manufacturer's Web site to download the latest audio drivers

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• Error 16, help you suggest does not work!

  I got monthly Acrobat XI, computer fell down, when I open my Adobe ID to download to new computer that XI is no longer there it is DC and it downloads but I get error 16 when I try to open it.  Have Windows 7.  I did all the suggestions on your website and but it still does not work.  Becomes very frustrated, as has happened for 2 weeks now.

  What other suggestions you have in addition: set permissions. Does it all and it's not the issue!

  Hi Karen,.

  Error 16 is a license error.

  Please try the steps listed in the KB Doc: https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  Otherwise, you can try using the last DC Acrobat as suggested by Cynthia above.

  Kind regards

  Rave

• Vmware server Web Access 2 does not work

  Dear vmware community:

  First of all thank you for taking the time to read this.

  I have a problem that looks like this isn't the first time that this happens, Yes, I was still unable to find an adequate solution.

  We have vmware server 2 is installed on a Debian 5 machine. Until yesterday, it was working fine.

  Today, when I tried to access to via web browser as usual, the page not load (the browser would say 'done, but the name of the page says "Loading").

  We have one of the virtual machines that are configured to start automatically, and it does not work as expected. The other I can't handle because I can't have the vmrun run perhaps (related?). So far, the only things that doesn't seem to work is web access only.

  There is one thing to note: after a restart of the computer, or restart the vmware mgmt, the service called "VMware Virtual Infrastructure Web Access" would show anything (while other services say "done" at the end of each line).

  I saw other people with similar problems here, and generally the solution was to reinstall the vmware server all on this machine. I would avoid this of course.

  Did someone already experienced this? Where I can look for more information on the VMware VI Web Access service won't start not (I do not know where are stored the logs of this service, maybe that can help).

  Please let me know if I should add any information, such as newspapers, etc.

  Thank you in advance!

  Hello

  I would recommend you check carefully this post and this post another may also help.

  Have you checked the vmrun documentation? Take a look at the file that I downloaded on this post.

  I would like to know if one of my tips work for you (or not)

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Documents folder deleted in error and start menu link does not work again

  In the folder tree pane (Vista Home Premium) it appeared that I had inadvertently copied double my completed application documents in the foledr of downloads, as it seemed that I had two copies of everything: waste of disk space. So I deleted the subfolder Documents of the record of downloads... and the main Documents folder are missing too! It's all the same thing. I don't understand why. But anyway. It wasn't in the Trash because there had been too much to go over there, so it is all definitely eliminated and lost: more than 8 GB :-(

  Therefore, the Documents link in the start bar stopped working. Even after that I created a new Documents folder in the same location as the original, the link on the start menu does not; When I click on properties for the link, the path is empty, and I can't find a way to save a path to it. Any ideas?

  The Document folder is a special folder that will be created in a special way.  Here is the procedure to correct a record that has not been created properly: http://www.vistax64.com/tutorials/90705-personal-user-shell-folders.html.

  Here is another article on how to restore a missing (like Documents) under Vista personal user folder: http://www.vistax64.com/tutorials/148461-personal-user-folder-restore-missing-folder.html.

  Between these articles, I think you should be able to solve your problem in one way or another.

  =================================================================================================================

  In case you're still interested in trying to retrieve the dossier of Documents initially lost, here are some options you can try:

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if this fails too, then the chances of recovery are very slim, but we invite you to try other programs if you want)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 0 x 80000003 - software does not work on the machine Win 7

  I'm running a fully corrected and updated installation of Windows 7 Ultimate with Office 2010, Adobe Acrobat XI and various other software up-to-date.  My machine has downloaded Windows 10 but I have not yet installed.

  Everything was working fine last night BUT this morning:

  -Outlook 2010, Word 2010 and Powerpoint 2010 will not start. IE 11 starts and then immediately fails.

  -Adobe Acrobat Pro XI does not start

  -Adobe Reader XI does not start

  In each case, I get the message: "the application could not start properly (0 x 80000003). Click OK to close the application. »

  However, the following programs open and run:

  -Excel 2010, OneNote 2013, OneNote 2010 - if SOME Microsoft works software

  -Chrome, 2013 Quicken, Quickbooks, Dragon Naturally Speaking-all of this work.

  * - I was able to make a PDF using Adobe Acrobat Distiller, but then, I was unable to view the PDF file, because the appearance of the Adobe viewer is broken.

  What do you think the problem is, and how can I fix this please?  This problem affects more than one type of software so it seems to be a Windows problem, is not a problem of Office 2010.

  Thank you for your attention!

  I had the same problem... word, outlook, adobe, PowerPoint opens... just got the error 0 x 80000003...  I uninstalled emet and boom... everything opens... now I need to know if I need to install a newer emet...

• New download of vCenter Server Appliance 5.5 does not work?

  I have a client with a small two servers ESX environment into a cluster HA (5.1.0, 799733).  Recently, the 5.1 device they used for management began to have problems and rather than try to solve this problem the plan was to download the new device of 5.5 and just migrate to this.

  A few months ago, I downloaded the device (5.5.0.5100 - 1312297) and deployed.  The deployment takes place without incident, and he fired an IP address from the DHCP server.  However attempts to connect to this device via the web client or the vSphere client failed.  I could connect to the console and it showed started lighttpd but I couldn't always connect.  Play with it, I finally got the web connection works however SSL wouldn't connect to the machine.  After a lot of hacking on I disabled the SSL requirement and could not enter the web management, but by this point I had broken a number of things and was not confident in this system.

  Other questions came, and it has put on hold for a while.  Now, I try again.  I downloaded and deployed a clean machine (5.5.0.5101 - 1398493).  I have deployed it no problem and he pulled a DHCP address, but even when I can't connect to the web server on port 5480.  A glance at the lighttpd configuration file says it's the right port.  Before you start to play and probably break things again once someone has ideas what I might be missing that a device out-of-the-box does not load?

  -Kurt Montgomery

  All comments are my own and do not reflect the views of my employer or clients.

  Cool, and it is not something like a proxy in place? What browser are you trying? Using another browser help?

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Error Code 39 - CD/DVD does not work

  A month ago I installed a new graphics (NVIDIA GeFORCE 6200 OC) card in my Dell Dimension 2350.  I discovered that the 250W power was not enough power to run the new graphics card, so I ordered a new power supply 480W.  After you install the new power supply, or my CD or my DVD players don't work.  They have a yellow! mark in Device Manager.  In the State of the device, he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "I tried to remove the Upperfilter and the UpperFilter registry entries.  It still does not.  I put the old power supply in.  It still does not.

  Help!

  
  

• & quot; the server behaviors & quot; sign does not work

  I want to create a directory protected by password. (Later, I want to create a donate"button now".) I finally understood that the plus sign in the Server menu behaviors did not work because I had not created a dynamic page, so I created one in .jsp (this is what my host said to do). But then the server behaviors menu wants me to create a site, choose a document type and set up a test server. I guess the site is the same that I am, and I have chosen JSP for the type of document, but how in the world I set up a test server? Is there a tutorial somewhere for that? I have access to several tutorials and they show you how to create forms, but none ever made allusion to the existence of dynamic pages - it's a completely different universe that I didn't even know that I had to enter in order to have shapes that worked. Thank you.

  How many logins and passwords you have Setup.
  If try to password protect a directory, you do not need to use DW server behaviors. Connect to your host control panel and see if you have an option to password protect a directory. If you do not, contact your host and ask them.

• For MS WIndows server 2008 Remote Desktop does not work.

  Hello

  We have the following.

  1 VMware 5.5 Vsphare

  2 virtual MACHINE working with MS Windows 2008 ent.

  3 SAP on this server load balancing.

  4. his joints to a domain

  Now, we have enabled RDP and used a user can access to hold off.

  but when we take RDP and entered the IP address on the server mentioned above. It gives the error that the RDP is not activated.

  What we did...

  1 checked any local policy or domain... no problem

  2. check that the RDP port is listened to... no problem

  3. has changed the port 3389... nothing happened.

  4. check for any firewall issue... Order the Windows Firewall... Still nothing...

  Checked port 3389 with telnet... its not going is not to...

  Help, please...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.