Vmware Server 2 has expired, comments not working

Similar Questions

• Vmware server Web Access 2 does not work

  Dear vmware community:

  First of all thank you for taking the time to read this.

  I have a problem that looks like this isn't the first time that this happens, Yes, I was still unable to find an adequate solution.

  We have vmware server 2 is installed on a Debian 5 machine. Until yesterday, it was working fine.

  Today, when I tried to access to via web browser as usual, the page not load (the browser would say 'done, but the name of the page says "Loading").

  We have one of the virtual machines that are configured to start automatically, and it does not work as expected. The other I can't handle because I can't have the vmrun run perhaps (related?). So far, the only things that doesn't seem to work is web access only.

  There is one thing to note: after a restart of the computer, or restart the vmware mgmt, the service called "VMware Virtual Infrastructure Web Access" would show anything (while other services say "done" at the end of each line).

  I saw other people with similar problems here, and generally the solution was to reinstall the vmware server all on this machine. I would avoid this of course.

  Did someone already experienced this? Where I can look for more information on the VMware VI Web Access service won't start not (I do not know where are stored the logs of this service, maybe that can help).

  Please let me know if I should add any information, such as newspapers, etc.

  Thank you in advance!

  Hello

  I would recommend you check carefully this post and this post another may also help.

  Have you checked the vmrun documentation? Take a look at the file that I downloaded on this post.

  I would like to know if one of my tips work for you (or not)

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This will happen even if Acrobat is installed via a Customization Wizard

  When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This happens even if Acrobat is installed via a package of the Customization Wizard of the product which takes care of activation and the license is not expired. What could be the cause of the issue?

  Uninstall your creative cloud application that basically allows you to download apps and redownload it. This should do the job. Your system just lost you license update.

• I bought Adobe Cloud, but now can't access Photoshop because it says my trial has expired. Not sure if I initially downloaded correctly. Do I need a license or redemption Code.

  I bought Adobe Cloud, but now can't access Photoshop because it says my trial has expired. Not sure if I initially downloaded correctly. Do I need a license or redemption Code.

  Hello

  Please activate your subscription:- Learn how to enable or disable Adobe apps.

  If you continue to get the error to the trial, see: -.

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• I have a subscription monthly-pay to specific Adobe through creative cloud.  All of a sudden to create Adobe PDF back "your request could not be performed.  Adobe Acrobat license has expired or not been activated. »

  I have a subscription monthly-pay to specific Adobe through creative cloud.  All of a sudden to create Adobe PDF back "your request could not be performed.  Adobe Acrobat license has expired or not been activated. »

  Are you referring to Adobe Acrobat?  If so, please take a look at this link and see if it helps:

  Acrobat license expired trial or renew the expired subscription

  Guinot

• Nested error Server R2 2012 - "hypervisor does not work.

  Good afternoon

  I'm having some trouble from a virtual computer inside my 2012 R2 VM server. I search around the internet for a while find several articles and forums on how to configure nested visualization including the official document on these forums but I still have a problem.

  My configuration:

  Physical server running - ESXI 5.5 1623387

  Physical machine - dell R720 (2 x e5-2690 - supports the VT - X and the EPT and it is enabled in the BIOS, esxcfg confirms with '3')

  New VM - Server R2 2012, VM version 9 installation (created by the web console vmx-09)

  I added / tried every configuration option I found:

  -J' created the virtual machine console web and checked "expose hardware virtualization assisted for the guest OS.

  -I made that vhv.enable = "TRUE" in the vmx configuration

  -J' tried to add hypervisor.cpuid.v0 = 'FALSE' to the vmx configuration

  -J' tried to add vhv.allow and more vhv.enable in the/etc/vmware/config, but neither makes a difference (discovered he was not necessary later thanks to a post on this forum)

  -J' tried to set the name of guestOS to "winhyperv" in the .vmx file

  -J' tried the type parameter of "ESXi 5.x" guestOS in the thick client

  -J' set the cpu/mmu virtualiztion tick at the last

  -J' tried to set the registry values level 1 as seen here ecx

  -J' have ensured that monitor.virtual_exec = "hardware".

  -J' uninstalled the hyper-v role and reinstalled after you make these changes without result

  -J' tried an another 5.5 ESXi 1331820 host with these settings and it does not work (VT - X confirmed as well)

  -J' tried 2016 instead of 2012 R2 server and it does not work

  I think it's all the things I tried. I'm sure I've probably missed something very obvious, but any help would be appreciated.

  This specific virtual machine has not generated a vmware.log file but still one of my virtual machines to test (with the same exact questions on the second physical host) has generated a couple and I enclose you one of them, and more can be provided if necessary.

  Thank you!

  Post edited by: Ian details price changes

  It seems that the latest Hyper-V does not like hardware virtual version 10.  However, it seems not be satisfied with version 11 of virtual equipment.

• Property of VMware Workstation 8 serial number does not work

  Hello

  I used to install WS7 issuing a command line like this:

  VMware Workstation.msi"/ qb! /norestart ADDLOCAL = ALL DISABLE_AUTORUN = 0 QUICKLAUNCH_SHORTCUT = 0 USERNAME = "xxx" COMPANYNAME = "xxx" SERIALNUMBER = "xxxx".

  Now, SERIALNUMBER has been removed from the msi properties table.

  Is it possible to have a solution for this other than the registration of import reg file?

  This issue has a lot of visibility with the devs, and we are working on implementing this properly in my computer.  For 8.0.1 users are able to configure shortcuts, port pass, serial key and persist / remove settings from the workstation through the command line, but we still have more work to do.  Still, some settings do not work and are not passed through. Currently INSTALLDIR and the features of REMOVAL does not work.

  But, you can indeed install w / serial number in the installation in silent mode starts now with Workstation 8.0.1.

  VMware-workstation-plein-8.0.1-528992.exe/s/v SERIALNUMBER = "xxxxx-xxxxx-xxxxx-xxxxx-xxxxx" works when it is run from an elevated command prompt.

• Windows server 2012 RDP Clipboard does not work for regular users

  Hello again,

  I wanted a little more secure our 2012 server.

  I disabled via GPO, local disk and printer redirection when a user connect through rdp.

  But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)

  Problem is that it works in only for the admin.

  The fact that local drive redirection is disable that copy / paste does not work?

  Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work

  and also, the process rdpclip.exe is running. I have restart this process.

  Any help or guide

  Thank you once again.

  Hello

  As I mentioned in your other Thread that we do not respond to server problems in this community.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• spool server says error signature does not work, can't restart, can't reload printers, missing icon

  Personal computer running Windows XP with two printers, HP Laser jet 1020 and Lexmark X 2250 works very well yesterday. Today, print jobs are back with the error signature telling me that my spool server does not work.  I went and tried to restart my spooler, no go.  Icons for missing print/fax printers program and I can not reinstall the printers.  Same message arrives, spool server does not.  How can I fix it.  I ran the difficulty it program, produced works and still nothing.  Help please!

  Hi Wendy,.

  It comes down at the end of the previous instructoins, so it of nothing to do but to remove and reinstall the printer, then follow these instructions to do this:

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Let us know.

  Best regards

  Matthew_Ha

• VMware - cmd.pl on VIMA does not work with vi-fastpass

  I have executed 1.0 VIMA and have an ESXi 3.5u3 as my virtual server. When I run vmware - cmd.pl - l command I always get challenged for username/password name. According to the documentation if I get the vi-fastpass enabled on the server, all RCLi controls function without requiring additional authentication.

  Any ideas.

  If you take a look on the VIMA release notes in the known issues section: http://www.vmware.com/support/developer/vima/vima10/vima10relnotes.html

  Some remote CLI commands do not vi-fastpass support

  Description: CLI remote svmotion, vmware-cmd and resxtop commands do not vi-fastpass support.

  All three of those who can't stand vi-fastpass including vmware - cmd.pl

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• Access to the customer via VNC in VMWare Server 2 (has that changed?)

  In earlier versions of VMWare server, it was possible to connect to a virtual computer remotely via a VNC client (or customer using this Protocol). Test with VMWare Server 2 that doesn't seem to work. I know that via the Web Interface, they start their own remote console player. Does anyone know if it uses another protocol of VNC (RFB) such as used previously? Actually now is no longer an open soluton?

  I think you should also add the RemoteDisplay.port = "5900" (or whatever port you want) as well.

• & quot; the server behaviors & quot; sign does not work

  I want to create a directory protected by password. (Later, I want to create a donate"button now".) I finally understood that the plus sign in the Server menu behaviors did not work because I had not created a dynamic page, so I created one in .jsp (this is what my host said to do). But then the server behaviors menu wants me to create a site, choose a document type and set up a test server. I guess the site is the same that I am, and I have chosen JSP for the type of document, but how in the world I set up a test server? Is there a tutorial somewhere for that? I have access to several tutorials and they show you how to create forms, but none ever made allusion to the existence of dynamic pages - it's a completely different universe that I didn't even know that I had to enter in order to have shapes that worked. Thank you.

  How many logins and passwords you have Setup.
  If try to password protect a directory, you do not need to use DW server behaviors. Connect to your host control panel and see if you have an option to password protect a directory. If you do not, contact your host and ask them.

• Server certificate 2012 R2 autoupdate not working

  In Windows Server R2 2012, certificates are not automatically being updated therefore with question as 'unknown Publisher '. I tried to install the same application in other machines with 10 Windows and Windows 7 and I can see Publisher name correctly.

  I tried to install the certificate manually in server R2 2012 but certificate still shows the old information (validity). Please guide me what the rule of firewall and service causing this error and how can I update manually or by windows update.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error message: "the security certificate has expired or not valid" when signing into emails

  original title: it is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  It is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  Chances are that your system clock is bad - check your regional settings in the control panel and make sure that your region, time, date, and year are correctly configured.