VMWare Update Manager Server does not work after changing name of host/IP

Similar Questions

• VMware View Manager "service does not work correctly."

  Location:

  I have 2 view connection Server 5.1.1 (VCS01 and VCS02) and VMware vCenter 5.0 1 u1 (VC01). The vCenter server is added to the view configuration and works without a problem. I don't use composer in this configuration, and I have a certificate installed, valid SSL on 3 servers.

  question:

  If I could connect the console administrator from view of VCS01 and I change something of the setting in "View Configuration\Servers\vCenter servers" vCenter server, vCenter server service turns red in the dashboard view admin with the status: 'the service does not work properly. This produces a few minutes later.

  

  The setting I changed allowed caching of size on a particular server.

  If I check the log on the second server View (VCS02), I see the following errors:

  714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > VC_OUTAGE:Url [Audit]: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:24.493 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:25.960 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:25.984 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:25.984 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:25.985 + 01:00 WARN attempt to reconnect (0AFC-0100) previous VC < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] didn't work, will wait before trying again.
  2012 11-15 T 14: 11:41.111 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] without the permission of Sciez VC.
  2012 11-15 T 14: 11:42.566 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:42.569 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:42.570 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:42.570 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] exceeded maximum number of VC reconnection attempts.
  2012 11-15 T 14: 11:42.571 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] permission to perform this operation was denied.
  2012-11 - 15 T 14: 11:43.021 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:43.021 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:44.501 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:44.503 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:44.503 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:44.504 + 01:00 WARN attempt to reconnect (0AFC-0100) previous VC < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] didn't work, will wait before trying again.
  2012 11-15 T 14: 11:59.630 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] without the permission of Sciez VC.
  2012 11-15 T 14: 12:01.072 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 12:01.074 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 12:01.074 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 12:01.076 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] exceeded maximum number of VC reconnection attempts.
  2012 11-15 T 14: 12:01.076 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] permission to perform this operation was denied.

  Once I reboot VCS02, the State turns green again in the view admin console. So I have a workaround, but I wonder if there is a fix or is it a (UN) known error?

  I had similar errors when I enabled cached host and had to give my user VC the privilege to change the configuration advanced options for guests. It's so she can allow the CBRC in advanced settings. (not in the documentation).

  It seems however, that your VC username missing certain necessary rights. I suggest double check for you rights user VC and take a look at your logs of VC. It should give you some info.

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• Update the maps does not work after 10.3.2.440 blackBerry 10

  My Z10 has recently been updated with ATT 10.3.2.440.  Since the update, "Maps" do not work properly.  The opening, I see the map, with my current position, but I'm unable to find anything or to plan directions.  The application displays "content is not available.  The content of my site is currently unavailable. »

  I tried to reset the device using the volume keys, but no improvement with this problem.

  Thanks for any help / advice.

  Well D

  Hello

  BB today released a new version of MAPS... I suggest get via BBWorld and then try again.

  Good luck and let us know!

• Tecra A3 does not work after changing the power settings

  I changed my power settings in my tecra a3 laptop and now it does not start correctly. wants to start but just keeps going back to press F2 or F12 it please help.

  Hello
  where did you changed them? In the BIOS or in the Toshiba HW setup?

  I suggest you go into bios after turning on your machine. You have to hit just F2 Ant then in the search for bios for setting "all default setting" or something with "bios setup defaults" to reset your bios settings.

  After that, your computer should start up again.

  Welcome them

• printer does not work after changing equipment

  I have problems with my computer and we determined that it was the motherboard.  We have installed a new motherboard, the new switch, second hard drive, the new keyboard and now my printer is not working correctly.  It prints half the line and text and does not correctly read the row format.  gives extra space, etc.

  Furthermore, none of my PDF read correctly.  Yes, I have the latest version of adobe.

  The game, 16 February 2012 17:22:14 + 0000, asured wrote:

  I have problems with my computer and we determined that it was the motherboard.  We have installed a new motherboard, the new switch, second hard drive, the new keyboard and now my printer is not working correctly.  It prints half the line and text and does not correctly read the row format.  gives extra space, etc.

  Have you installed the driver appropriate for the printer?

  Furthermore, none of my PDF read correctly.  Yes, I have the latest version of adobe.

  Adobe is a company, not a program. Do you mean Adobe Reader? If so,.
  What is unsuitable for the way it reads?

  Also, I strongly recommend to move from Adobe to the free Foxit Reader
  Drive to http://www.foxitsoftware.com/Secure_PDF_Reader/ I think there
  much better than Adobe Reader.

  Ken Blake, Microsoft MVP

• Windows 8 Pro key does not work after changing HARD drive

  I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).

  After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.

  The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).

  On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"

  Please suggest a solution to this problem.

  If my copy of Windows would have been an upgrade version, it would not have worked the first time.

  Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Activation of the phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Data hold does not work after changing time system

  Hi guys,.

  I configured Oracle Data Guard successfully between a primary database and a database physical standby.

  Later, I changed the date and time in the two servers at the level of the BONE (from 14 - Sep to the 13 sept). The time is the same on both servers, but it has been changed. Then, I created a test table in the primary database, but I see not in the database of relief, well that configuration sounds good.

  Could you please explain?

  It is 11.2.0.1.0 - 64 bit Linux.

  Here is the code:

  In the primary:

  SQL > select sysdate to double;

  SYSDATE

  ---------

  13-SEVEN.-15

  SQL > desc hr.test

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  A                                                  NUMBER

  B                                                  VARCHAR2(10)

  In the database backup:

  SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.

  SQL > 2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  232 06-06-SEPT.-15-15-SEP YES

  233 06-06-SEPT.-15-15-SEP YES

  ..

  ..

  261 14-14-SEPT.-15-15-SEP YES

  262 14-14-SEPT.-15-15-SEP YES <-here it shows the old date

  31 selected lines.

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  In the primary db:

  SQL > alter system switch logfile;

  Modified system.

  
  

  Pending:

  SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.  2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  263 13-14-SEPT.-15-15-SEP YES

  264 13-13-SEPT.-15-15-SEP YES <-new date shows fine here

  265 13-13-SEPT.-15-15-SEP YES

  266 IN-MEMORY, 13 SEPT. 13. - 15-SEPT-15

  35 selected lines.

  
  

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  Hello

  You can check availability using v$ view dataguard_status.

  You can make a request on a user table at the backup site if the standby instance is in recovery mode.

  to check your test table, you must stop the recovery mode and start in read-only mode

  Cancel log apply services:

  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;

  Open the database for read-only access:

  SQL > ALTER DATABASE OPEN READ-ONLY.

  Then you can query your table test.

  Concerning

• vCenter WebClient does not work after changing the field of vCenter Server

  Hi all

  I had to migrate my vCenter to a new domain. This migration is smooth without any problems. Everything works fine.

  Now, some of my colleagues need to use the web Client and I discovered, after to be authenticated successfully to the web server,

  I have an error message:

  Unable to connect to vCenter Inventory Service - _ https://vcenter._olddomainname: 10443

  Thus, even after reinstalling the Web server on my vCenterServer (version 5-update1) component, it always uses old domain information.

  I can't find where to change it.

  Hope you can help me with that.

  Thanks in advance,

  Frank

  Have you tried to run the command as shown in register.bat

  http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-9C65879E-7442-46E2-9A20-A858B2800D12.html?

• Touchpad does not work after changing from Vista to XP Satellite A210

  Hello world!

  I changed my Windows and now, something is wrong with the Touchpad. It works like a mouse (the cursor moves right and left buttons are also correct).

  Before with Vista, I had the button send, Wi - Fi connection, something else and its evolution, and more he had extra blue light. Now these buttons are not active and not etrxa of light.

  Satellite A210 laptop.

  I already tried all possible drivers, but perhaps you could advice me something else.

  Thanks in advance!

  Please try this one
  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-20070809133247.zip

  and give us your feedback if this driver can help or not
  THX

• Internet does not work after changing graphics card.

  Hello

  I have a HP Pavilion HPE h8-1212 on windows 7 (64-bit) and I changed my graphics card for an AMD Radeon HD 7790 so like my case.

  after reboot and installation of my graphic card drivers, I noticed that I have yet 2 "Bluetooth devices" (bluetooth device) and I don't have a Wifi connection. I am currently connected to my internet via an Ethernet cable.

  Here are some screenshots of my problems:

  

  

  Please help me with this.

  The wifi card, if it's a minimap, as it is in the image, should have had two sons goes to the card wifi which were channelled through the case.  These were responsible for picking up the wifi signals to work.  Since the screenshot shows the weak or no signal, I suspect this is the question.

  

  As to describe the process of removing antennas, I couldn't find the following steps.

  Before you start: Remove the access panel, the collar, the higher optical drive and the upper bezel.

  1. Detach the antennas wireless the wireless LAN card.
  
  
  2. Cut the cable tie fixing connectors antenna for the front i/o cable harness.
  
  
  3. Pull the antenna cables without wire through the access hole in the upper part of the unit.
  
  
  4. Pick up each cable hooks fixing the top of the page of the PC.
  
  
  5. Detach the screws for each antenna.
  
  
  6. Pull the antennas of the unit off.

  In the end, it seems that the antennas are routed right under the top cover.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care