VMware workstation 12 player: any host con rete locale

Similar Questions

• VMware workstation 12 player

  VMWare workstation 12 player is free for non-commercial use?

  Yes.

  Of https://www.vmware.com/products/player/

  ~ snip ~

  If you just want to learn more about virtual machines or run virtual machines at home in a non-commercial environment, you can use Workstation 12 player free of charge.

  ~ snip ~

  André

• How can I run VMWare Workstation on a virtual host?

  I need to run VMWare workstation 7.1 on a 2008 R2 virtual running on ESXi.  The software installs fine, but when I try to start the virtual machines I get the following error 'you are running VMWare Workstation via an incompatible hypervisor. You can not power on a Windows virtual machine until this hypervisor is disabled. »

  Is it still possible?

  Due to a design flaw of material in the first AMD - V compatible processors, we do not support AMD - V on your host.  Hardware support for virtualization (AMD - V or VT - x) for the virtual machine outside is needed to get nested VMs to work.

• Streaming does not no new Player 7 and Workstation 12 player support

  Hello again.  This is not the first time that I had a problem like this (see Streaming works does not in 5.0.0 and 5.0.1 Windows drive)

  Streaming is documented in the manual, for player 12 Workstation VMware Workstation 12 Player for Windows Documentation Center

  When Player 7 came out, streaming has stopped working once again, popping up an error "file not found".  I just stood on Player 6.

  Now, I saw that the new player was released.  I installed it, eager to see if the killer feature that I learned to rely on a started working again.  This is not the case.

  Interesting excerpts from the journal:

  2015-08-25T22:33:09.479-07:00| vmplayer| I125: Command line: "C:\Program Files (x86)\VMware\VMware Player\vmplayer.exe" "http://my.host/vm_images/test/test.vmx"
  2015-08-25T22:33:12.739-07:00| vmplayer| I125: DictionaryLoad: Cannot open file "http://my.host/vm_images/test/test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:12.739-07:00| vmplayer| W115: CnxFSVMDB::IsEncryptedConfigFile: Failed to load dictionary. Cannot open file "http://my.host/vm_images/test/test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:12.739-07:00| vmplayer| W115: 
  2015-08-25T22:33:13.270-07:00| vmplayer| I125: VMMgr::OpenVM (cfgPath=C:\Users\myuser\mycwd\http:\my.host\vm_images\test\test.vmx)
  2015-08-25T22:33:13.270-07:00| vmplayer| I125: DictionaryLoad: Cannot open file "C:\Users\myuser\mycwd\http:\my.host\vm_images\test\test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:13.270-07:00| vmplayer| W115: CnxFSVMDB::IsEncryptedConfigFile: Failed to load dictionary. Cannot open file "C:\Users\myuser\mycwd\http:\my.host\vm_images\test\test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:13.270-07:00| vmplayer| W115: 
  2015-08-25T22:33:13.285-07:00| vthread-9| I125: VTHREAD initialize thread 9 "vthread-9" host id 2084
  2015-08-25T22:33:13.285-07:00| vthread-9| I125: VMHS_ManageVM failed: ret = File not found
  2015-08-25T22:33:13.285-07:00| vthread-9| I125: Cmd /host2/#_client/util/vm/cmd/##9/op/manageVM/ failed: File not found
  2015-08-25T22:33:13.285-07:00| vmplayer| I125: DlgUI: Error while opening the virtual machine: File not found.
  2015-08-25T22:33:13.301-07:00| vmplayer| I125: VMMgr: Failed to open pending VM: File not found
  2015-08-25T22:35:02.782-07:00| vmplayer| I125: WORKER: asyncOps=0 maxActiveOps=0 maxPending=0 maxCompleted=0
  2015-08-25T22:35:02.797-07:00| vmplayer| I125: Clean exit.
  

  Let me know if you need more information to track down this bug, or if there is a place better to go to report.  This forum seemed to work OK last time.  In hindsight, I should have reported the issue when Player 7 came out.  Maybe you guys need to add this as a regression test to your test suite

  Thank you

  Jeremy

  Sorry for the sudden removal of this feature Jeremy! Let's get the fixed docs. FWIW, usage statistics we collect indicate less than 10 streaming power VM on operations per month. It's a nice feature, the developer maintenance cost was not justified.

  > Suggestions as to how to replace the functionality of streaming in our workflow?

  How about try this: put the VM library on a network share. When someone wants to use a specific snapshot of the VM library on their local computer, using vmrun to create a linked clone (clone can be on a local disk). Since everyone will have write access to the library of the virtual machine, make sure to back up. I have not tried myself (I don't have the practical configuration), but I think that should work.

• I'll be able to run VMware Workstation on Win 2008 Web edition?

  Hi all

  It is my first post so I apologize if this question has been answered before but I have a hard time finding the location of research right and the forum.

  Any help would be appreciated thanks.

  The host is currently a windows Server 2003 with vmware worksation installed... We have a... hp Server will spare...

  TO clarify, you'll move VMware Workstation on a different host?

  They are for example only development as a domain controller to run various bits n bobs in the dev environment.

  If the host is still underway for dev, and you don't mind being in a bit of territory not supported, so go ahead and try.  Download Workstation test and see what happens.  As I said, as far as I KNOW, Web Edition may miss a few things like some of the tools of administration or server roles.  But that will probably not e problem to host virtual machines.

  If there are known issues with VMware workstatsion and web 2008 so that we would have to look at a change in the operating system.

  Beyond the legal bits on not not using Web Edition, for anything other than web hosting, I suppose that you'd be ok.  What is the attitude of your shop to Linux?  Or license Windows 2003 current server, can it be transferred to the HP Server?  (e.g. non - OEM license or volume license.)

• VMware workstation and ReadyNAS to store the virtual machine

  Hello

  I just bought a Netgear Readynas box for home (Readnas RND2000 XRAID SIN) and it seems like a big box to keep a backup of my critical data and flow data and video music.

  Now that will take about 100 GB in space and I'll always have weird to play with 400 GB and it made me think if I host all my test VM I created using VMware workstation, for the moment I use a local computer, but its lack of disk space, I tried to put the virtual computer on an external drive and performance is ok on it as well but for me , it would be ideal if I could store them on the readynas and open them through VM workstation.

  Of course put it on a NAS box could be problematic, has anyone tried this on one of these boxes ReadyNAS? its probably not designed for this type of data and traffic, but if anyone has got, it works, I would be interested to hear comments.

  One of the potential problems in my view is I'll be going through a wireless router with a 4 port 100 mb go and see that as a problem, it replaces a gigabit switch would make a huge difference, or would it still slow?

  I would appreciate any advice on this.

  Thank you

  I'll guess that your external hard drives are USB.  In this case my answer is Firewire.  I run several of my virtual machines to external Firewire drives very good success.  While I ran a few virtual machines from USB, USB just isn't the sustained performance of Firewire.  This is the case on my Macbook Pro and my HP Pavilion (with built-in Firewire.)

  That said, even if I don't have any experience with the ReadyNAS, I use a Windows Server as NFS storage to an ESX Server.  The gigabit switch is almost a necessity.  Possible about 100 MB, but significantly better on gigabit.  In addition, the link of the ESX to Windows NFS is on a physically separate local network segment, so I don't have any problems with the network traffic slows down the virtual machine.  I have not tried Workstation with storage NFS, as I always got Firewire on all my machines so I kept for most of the virtual machine from the network.  YMMV, of course, but I suspect that you will have to keep the rest of the traffic network in mind if you can not create a separate network for NFS storage.  (for example: no internet surfing on the host while the virtual machine is running.)

• How to get Ubuntu 11 unit interface to work in VMWare Workstation

  I can't get the new Ubuntu Unity 11 work in VMWare Workstation interface.  Any help would be appreciated.

  I'm running the virtual machine with 2 GB of RAM, 2 processors and 3D graphic acceleration.  I think that it is a more powerful configuration than an old laptop on which I easily got the work unit.

  It still works, whenever Ubuntu starts, Gnome rather than unity.  This happens even if I have, that he set up on the logon screen to run Ubuntu (which is Unity) instead of Gnome.

  It's hard to find since VMWare also uses the term of the unit. Please be clear that I am wondering about the new Unity of Ubuntu 11 interface, NOT interface of the VMWare unit.

  VMware does not support what is needed to make it work in 3D and the only choice I've seen is to use unity 2D

  In a Terminal:

  sudo apt-get install unity-2d-default-settings
  
  

  See also:

  How to install unity 2D (Qt) in Ubuntu 11.04 / 10.10 ~ Web Upd8 ...

  Unity 2D is available as an Option in Ubuntu 11.04 Natty Narwhal

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• VMware Player (VMware Workstation?) Interfere with the connection of the browser

  I installed VMware Player (or so I think) on Vista Home Premium 32 - bit SP2.  Here's what the Properties tab - & gt; Details shows for "C:\Program VMware Player\vmplayer.exe:

  Description of the file: VMware Player
  Type: Application
  File version: 6.5.4.11892
  Product name: VMware Workstation
  Product version: 6.5.4.11892
  Copyright: (c) 1998-2010 VMware, Inc..
  Size: 3.06 MB
  Updated: March 31, 2010 23:31
  Language: English (United States)

  I looked for this in order to make the version of the-what? -VMware Player or VMware Workstation I, and in order to find the right users Guide or manual.

  But this isn't my problem entirely.

  My problem is that I was using my HTTP (browser) client and it has been noticed that I could not connect to certain websites (e.g., http://www.gnu.org/).  I can do that at home, through my wireless router (configured for IP) static on the local network.  Then I go to work where I use the ethernet connection (not getting any IP by DHCP!... configured for a static IP address on the WAN).  I call tech info, that says they can connect.  I think it's because I'm using OpenDNS instead of the name of University servers, and then I enter the "Network Sharing Center' and see 'several networks' and THREE Local (ethernet) connections.

  After that think "WTF?" and think that 2 local connections and 3 are screwing things up, I disable all local connections and re-enable the connection with the hardware ethernet card.  Who has NOT solved the problem of my failed to connect to the web site, that is

  http://grub4dos.sourceforge.NET/

  The service

  http://GSiteCrawler.com/tools/server-status.aspx

  reports the HTTP 200 response code very quickly.  I use this service to see if the info tech group workplace blocks a web site.

  However, I want to learn more about virtual network maps created by the VMware Player (desktop?).  I ran the "vmnetcfg.exe" interface and in the Summary tab, see:

  Virtual network	Subnet	DHCP
  VMnet0 (bridged)	255.255.255.255
  VMnet1 (host only)	192.168.136.0	Activated
  VMnet8 (NAT)	192.168.219.0	Activated

  The guide I want to read should explain what are these local ethernet adapters and they can interfere with the operation of the host outside of the virtual machine.

  Thank you

  Welcome to the forums!

  The guide: http://pubs.vmware.com/ws7_ace26/ws_user/ws_net.html#989125

  Where is your problem to browse occur? In comments or host?

  VMnet0 is the virtual bridged network. He connected the virtual NETWORK adapter of your guests who are bridge transparently to your physical network device.

  VMnet1 is the network invited only, a virtual, where the host and the guests are members of. You see a VMnet1 NIC on the host, because it's the virtual card that the host uses to connect to VMnet1.

  VMnet8 is the NAT network. It connects to each stack TCP/IP Protocol on the host computer. Therefore the guest may use any communication device that uses TCP/IP. Th egust is hidden behind the NAT device. This means that all packets leaving the host, coming from the prompt appear to come from the host. VMnet8 virtual card is one that connects to the host on VMnet8 virtual network to enable external communication for the customer.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• 6u2 ESXi host nested on VMware Workstation for Linux referee v12

  Hello all, I have

  I have a lab environment virtual running in VMware Workstation for Linux v12, and my ESXi hosts do not work correctly on one of the virtual networks. All my troubleshooting suggests a problem with nested ESXi hosts that may be a bug, but I want to assure you that I did everything properly first. That's why I post here with the hope that if I made a mistake that maybe someone else can point out he me.

  Physical system

  8 core Intel Xeon 2.1 GHz CPU

  128 GB of RAM

  OS - kernel Linux 64 - bit w/3.19.0-32-generic Linux Mint 17.3 (fully updated from this announcement)

  VMware Workstation 12 Pro - 12.1.1. Build-3770994 (fully updated from this announcement)

  Nested ESXi host VM

  ESXi v6.0.0 (Build 3825889, completely updated from this announcement)

  4 cards 'physical' (only 3 used for now)

  -all use the e1000 NIC hardware virtual, but also tried vmxnet3 NIC with no difference

  -vSwitch0 use vmnic0 & 1 vmnet16 of virtual network in a pair of active / standby

  -vSwitch1 uses vmnic2 on network virtual vmnet18

  -vmk0 used for management on vSwitch0 and vmk1 for iSCSI on vSwitch1

  -"Promiscuous" mode and forged passes enabled on all Port vSwitch groups (activating or turning off these features makes no difference)

  Test performed until now

  I checked that all the IP addresses and network masks used are correct.

  With the help of vmkping I ping other nodes on the network vmnet16 with success.

  With the help of vmkping I tried to ping the other nodes in the network vmnet18, but that has failed.

  I have depolyed other non - ESXi VMs on the vmnet18 network, and they are able to ping each other, but are unable to ping or ping by the ESXI host.

  I tried various material virtual NIC as mentioned before, but without changes in the results.

  I tried to use only local network instead of the vmnet18 guest network segments with no change in results.

  When I find out the status of the network adapters on the ESXi host through vCenter or host incorporated client vmnic0 & 1 time display network information, but vmnic2 shows no networks. Yet, I know that there is a network with different VM communicate on it. Moreover, I was able to get all of this work on a Windows system running 10 Workstation (this is the laptop that my employer gives me with).

  Having built nested ESXi labs on different platforms as well as physical environments in the past, I'm very confused as to why I can't get this special configuration to work. At this point my gut tells me that this is probably a bug any with the nested themselves ESXi hosts. Since I can get all this work on vmnet16 including the management of ESXi hosts and the VCSA that I use, I am sure that my vSwitch configuration is correct (other than the IP address space and vmnic configurations is bascially the same). Because I can get other virtual machines to communicate over the network vmnet18 I don't see how can be a VMware Workstation for the issue physical Linux host. Is there something obvious I'm missing here? I read on the ESXi hosts nested under VMware Workstation after having known problems and bugs with networking. If anyone else has experienced this?

  Thanks for any help others can provide!

  Kind regards

  Patrick

  Well, the problem is now resolved. The problem was what covelli was trying to explain, but I couldn't because the physical host network adapters being mentioned.

  The problem on the Linux host, but it was a problem of permissions with the virtual Ethernet adapters. The following article has the fix:
  With the help of Ethernet virtual cards in Promiscuous Mode on a Linux host (287) | VMware KB

  Even if I launched the workstation under the root user I have yet met this problem and which still makes no sense to me, but change the permissions solve the problem. I was not getting an error message on my Linux Mint and Ubuntu system, but when I tried on a second box of Linux Mint that I just got the error has been generated, and the error message was the above link it contains.

  So, here's what I learned:

  (1) the question has nothing to with a VMware Workstation definition that you can configure.

  (2) the question has nothing to do with a physical network card.
  (3) the question has nothing to do with any vmnic on the nested ESXi host.

  (4) apparently virtual Ethernet adapters are not the correct permissions when created.

  All you have to do to fix this is:

  (1) open a terminal.

  (2) run the command ' sudo chmod a + rw/dev/vmnet * "(don't forget to run this each time that you create a new virtual network).

  You can also create a group, as shown in the link above and simply give this group the correct permissions. Personally, I think it's easier to just give everyone the rw permission.

  I appreciate the help that others have offered. I did not understand what was asked for in previous answers because of the terms that have been used.

• Host Windows system restore back up virtual machines the VMWare Workstation?

  Is it save to perform a restore of the system on a Windows host running VMWare Workstation 9.0.2 with the premises of virtual machines? I just need confirmation that the VMs will be still functional after restoring the system.

  Welcome to the community,

  System Restore should not touch all personal documents, what configuration file and virtual disk are in reality. However, a restoration of the system can change the parameters of the application Windows for for example VMware Workstation. Anyway most that should happen is that you have to reinstall VMware Workstation in such a case.

  see "what files changed during a system restore?" at http://windows.microsoft.com/en-us/windows/system-restore-faq

  In any case, it is always useful to have a current backup!

  André

• Windows 7 64 bit host works very slowly after discontinuation of VMWare Workstation

  I am running 64 bit Windows 7 on a Dell laptop with an i7, 6 GB ram and VMWare Workstation 9 processor. Everything works well on the host and the VM, while the virtual machine is powered on but after the suspension of the virtual machine and station work out of the system host becomes very slow and applications become desensitized. This lasts for several minutes after the stoppage of work. In general, I have executed only a VM at a time, but even when I got a couple of them run both the host system and they are very sensitive. I started the task with great difficulty Manager when this occurs to see if I can see problems with the free time of processors and memory use, and everything seems fine. So far all my research turned discussions about this kind of problem during execution of the virtual machine so I am at a loss to know even where to go next to make this diagnosis.

  Kind regards

  Bruce Brandt

  This is because windows is the collection of memory the vmware used in the system and marking of these blocks of memory piece by piece as 'free '. If you shutted down of the virtual machine (not paused) then the memory can be returned to the system immediately. I guess if it was caused by the Intel RST driver because I noticed about there is also no question AMD computer used by my colleague.

  You can wait until the stops of HDD-light, keeping the stats of light, constant in the meantime try avoid to activate any application of consumption-e/s disk / operations.

• VMware Workstation 10.0.1 and Windows 7 VM crash on CentOS 6.5 host

  Just upgraded to 6.5 CentOS 64-bit (2.6.32 - 431.el6.x86_64). After the updates and reboot I launched VMware Workstation 10.0.1 as I normally and began my OpenVPN (Wheezy Debian) VM with all the problems. I then started my Windows 7 64-bit VM and the entire army what OS hangs and I have to reboot using the reset button.

  I was able to reproduce twice in a row. The Windows 7 VM seems to start fine and then when I type my credentials in and it starts to load the office which is when everything goes south and the host completely freezes.

  The Windows 7 VM has nothing too complicated installed in it. Some Epson software to start uTorrent and printer in network at startup. Steam does as well, but it is not auto-login or do anything really.

  I just did some testing of synthetic load and covered all 8 cores (much more than the usual load) up to 24 GB, 32 GB of RAM and 50% of CPU on the host computer and things remained stable. I thought that a second question could be RAM related because after a soft on boot the Windows 7 VM running I am to about 7 GB of RAM used on the host computer and from the WIndows 7 VM would put me over 8 GB, which resembled a number of nice where things might go wrong If it is RAM related.

  Log files:

  kdump(1): https://Paste.Fizi.ca/?f5c7c3e6945f8ce4#hPoN0VUJbPKA07hbDPWuE1D0e9FC7Ss8RNvF5Qv7yy0=

  vmware - 0.log: https://Paste.Fizi.ca/?05d42cd929bb5237#Zgbtlm7R+bZEHEOs5uSyA6Xin6FOOflWYWvNnHnxksM=

  Any ideas?

  Looks like I need to learn how to use the forum search tool.

  It is a dupe of VMware Workstation - 10.0.1 fails after the software update from RedHat-6.

• VMWare Workstation 9 cause host Windows 8 to break off and restart

  I have windows 8 Pro 64 - Bit clean installed as host. With the help of vmware workstation 9.0.0 - 812388 trail that began a few days ago. Whenever I start any SMV it causes reboot without any regradless of error messages which operating system I use my computer. I use virtual machines on windows 7 and it all works. I can't understand what is wrong. My windows 8 is all date and drivers to and helped Intel VT - x.
  My characteristics of the computer is
  2 x 4 GB DDR3 RAM total = 8GB
  Motherboard: Gigabyte Z77X-D3H
  2 x 1 TB total = 2 TB hard drives
  Graphics card: Radeon 5450 1 GB
  CPU: 3.20 GHz Intel Core i5-3470
  Intel HD integrated graphics

  Workstation 9.0.1 has a fix for this problem.

• The host VMware workstation and multi-core CPU

  Apologies if this has already been answered, but all my research to turn questions about processors how can specify in a virtual machine. It's not what I'm after here.

  I want to know is the use of VMware workstation (v6 and v7) is available on a multi-core worksation host physical cores.

  I have a scenario where we have several virtual machines containing sensitive coding environments. The material that they are on is a little old and we don't have the time or the knowledge to recreate systems (a combination of Matlab, DSpace and some custom coding). Our only option (and we did it for a couple with success so far) is to create virtual machines of these workstations.

  Which is absolutely essential for us is the material we choose VMs on host. Virtual machines will use simple/double/processors virtual.

  In order to choose the correct hardware platform, I need to know if VMware workstation is running an instance of the virtual computer within a single processor (in this case is the reduced performace?), or if there are multithreaded and make the most of the hardware it will run on.

  (We are not welcome, never more 2 virtual machines at the same time)

  Any suggestions on material would be appreciated also. I think of something based around a core of Xeon 4-6 with 12-16 GB of RAM.

  Thank you very much

  Nick

  Correct, for laboratory/debugging and interaction VM Workstation is pretty good.