Y530 Wireless

Similar Questions

• IdeaPad Y530 wireless wifi is turned off then on battery

  I have a new Ideapad Y530 Intel 5100 wifi wireless network card. It works fine when I am connected to an electrical outlet, but when I am on battery it loses connection Wireless after about half an hour of use. When I check the network card, it shows that it is disabled. I'm trying to enable him, but she remains disabled, I can't operate unless I restart the computer. I've done so far that has not fixed it problem:

  1. I checked the power management settings in the device for the network card Manager and you have unchecked the box "allow the computer to turn off the device to save power".

  2. I already uninstalled Readycomm since I had problems with it before

  3. I also affect roaming aggressiveness 1.

  Can someone direct me on how to keep network to get wireless card disabled when I am on battery?

  In addition, once I lose the connection Wireless because the network card is disabled, Windows Vista network settings are really slow to come for me to check my network connection and settings, never had this problem with XP. System seems to hang for several minutes before I can get into the network and sharing Center.

  Thank you.

  I think I've figured this out. I disabled and then uninstalled the power management Lenovo that at first seem to solve the problem but didn't. I knew that it was something to do with power management, so I checked my settings and it was set to energy saving. When I changed to balanced remained turned on the wireless network adapter and I have not lost my network connection. I checked power options advanced for the adapter in symmetric mode and energy-saving wireless and found that Power Saver if it had set for the Maximum energy savings while only balanced if it had set for maximum Performance. The setting for maximum energy savings, it is this that kept disable the wireless card with after several minutes, I changed it to the following configuration, low energy and my without thread remains active and I don't lose my network connection. So for anyone else having problems with the loss of their wireless connection, try to check your power management settings.

• driver [ideapad y530] win xp bluetooth problem

  Welcome to all,

  Recently I bought lenovo y530. I managed to get rid of vista and install xp. Everything went smoothly until the installation of bluetooth, downloaded driver from lenovo support Web page seems to have a bug or smt. I can't install it. (corrupted file error) Tried downloading twice and still the same error. Can anyone provide a suitable driver, please

  eeKyy

  BTW. Sorry for my English

  I found a solution 4 me, probably not the best, but it seems 2 work...

  as there have not been any CD or dvd provided by lenovo, there was a partition container:

  * Repair Sytem software

  * OneKey Recovery Software

  * Vista drivers

  In the folder of vista drivers, there is a folder named "13.Bluetooth" containing the bluetooth drivers and software for windows vista. Installation only works for versions of vista, but there is a "Win32" subfolder (installation it does not work for me there again, it seems that for the 32 vista versions) containing another folder named 'bouzham '. There should be a file "DPInst.exe" and by the execution of it, you should be able to install the bluetooth drivers. If this isn't the case, follow these steps:

  -selected bluetooth device in Device Manager (of course there was no driver not installed, but nevertheless you should see, marked in yellow, if you pass on your wireless devices, time, manually and with the Fn + F5 keys)

  -Right-click on it in the context menu, select 'update driver... '. "(or install driver, I don't remember, but it should be two th)

  -in the first window, select "install from a list or specific location".

  -in the second window and then select "Search for the best driver in these locations" and check "include this location in the search" and navigate to the folder "bouzham" mentioned previously (... \13.Bluetooth\Win32\brcm), and then click ok, and then to have the drivers installed...

  hope this works for you too...

• Y530 high battery wear level

  Dear friends,

  I have a problem with the battery life on my Ideapad Y530 (Intel Dual Core T4200, NV GF9600M GS 512 MB, disk HARD 320, 3 GB of DDR3 memory). My laptop is about 1 year and 1 month, and the battery life decreased about 03:15:00-01:45 (power saver plan, set minimum screen brightness). Everest reports the following information about the battery:

  Capacity: 56160 mWh

  Capacity: 28390 mWh

  Wear level: 49%

  I am using windows 7 Home Edition premium for about 8 months all the latest drivers downloaded from the lenovo site and all updates from windows update. Is this normal level of wear for a portable years? Is there a way to change this kind of things other than buying a new battery? What windows 7 somehow related to such wear high level?

  Thanks for any help.

  Best regards.

  Yes, the battery is normal. This is an inverse square, so finally he drops down to 14000mWh.

  A new battery costs $89 for my Y550, is not too bad if you rely on the battery.

  If you really need to stretch this battery, use Super Power Saver. It stops Windows Aero, Wireless, sounds and any other material useless. It is great for typing Word Documents and others.

• Y530 + Win 7 - no bluetooth device found

  Hello

  My Y530 originally supplied with Vista, but I upgraded to 7 (as could get it for free from MSDN AA).

  Bluetooth WORKED FINE with Vista, but now there is no way I can activate it. I downloaded and installed all the drivers Win 7 and the Lenovo Web site software (except driver BT, as it is said there is 'no bluetooth device detected' and I shoul turn it on). FN + F5 poster WiFi card only, also no BT in Control Panel device. What can I do?

  PS. I'm starting to miss my old T41 where everything worked fine, just the way I needed. Y530 is full of annoying features (not to say 'stupid'), with Lenovo Power Management as the first of them :/

  I use the 32-bit version of Windows 7.

  Meanwhile, I managed to solve the problem. When I was running my laptop for the first time after bringing it in a store, I noticed that this lamp wireless was pink - which means that BT was active. So I went to the BIOS and brought back to the default settings, that works then BT., I started the system and it automatically installs the driver. To be sure that everything is compatible with the power management, I also installed Lenovo for the BT software. After that Fn + F5 shows the device and everything seems to work OK...

• Y530 with XP 64 bit OS?

  Hello

  Has anyone tried to install XP 64 bit on Y530? No idea if it works or not? Since I have 4 GB of ram and I prefer XP over VISTA, I want to install the XP 64 bit on Y530.

  Help, please... not sure whether or not this will have problems with drivers. Currently I have installed 32-bit xp and works very well.

  Reference is made to the XP x 64.

  in any case, here are some links.

  Intel drivers...

  AHCI

  Chipset

  Graphics

  Wireless

  Matrix Storage Manager

  Synaptics driver...

  Touchpad

  Driver Broadcom...

  LAN

  Other drivers

  Card reader

  Audio

  Modem

  As for the camera of Lenovo, try this.

  I don't know if the Lenovo Energy Management, thermal Mode button or remote control pilot work in x 64.

• How will I know if I have the bluetooth... IdeaPad Y530

  How will I know if I have the bluetooth. I just received this IdeaPad Y530. On the sticker on the bottom is a MO:AB08102003.

  I type "bluetooth" in the search box of windows and a window opens for bluetooth devices and there a task click on bluetooth settings, but nothing happens when I click it.

  On your keyboard, press 'Fn + F5'. It should appear a wireless device management utility. If you have a bluetooth device on your laptop, it should show a card 'Wireless' and 'bluetooth device.

• IdeaPad Y530

  I have a new Ideapad Y530 with Vista Premium 64 bit.

  Two questions:

  (1) (5100) Wi - Fi is not automatically connect to the network.

  (2) manual wireless network connection drops off the coast with 30 seconds and have to repeat several times before it lights.

  What is the cause and how can I solve this problem?

  Thank you

  RUPEN

  remove the lenovo wireless software and use the built in software, that should take care of the problem

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• New Magic Mouse (wireless) works erratically

  New Magic Mouse (wireless) said low battery but it does not use a battery? How to charge it?

  The Apple article below should help.

  Recharge the battery in your Apple - Apple Support accessory

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• Bridge of Airport Extreme wireless

  Hi all

  I have an airport extreme and I wanted to install a wireless bridge.

  IM on the 2nd floor and my router is on the 3rd floor

  my wireless signal is weak on the 2nd floor, so I wanted to bridge so that I get full signal wireless 2nd floor also

  I do not want to use cable (from the router to the most extreme airport)

  can someone explain to me how to do this

  Thank you

  Hi irfan_mu,

  Check this help page: AirPort base stations: install and configure a wireless network extended (802.11n) - Apple Support

• Add a preferred wireless network

  I want to configure the wireless preferred networks on a pool of 25 computers at once while no users of the console/GUI/admin is entered, that is to say the computers are provisioned waiting on the registration screen. All computers are properly configured for access "remote management".

  I'm looking for something in Apple Remote Desktop to add some favorite wireless networks with the terminal command "networksetup" to these remote computers

  I got the terminal command:

  sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password

  Any help?

  Hi basil,

  -Something that should work can use the ARD from the Mac Admin officer, to run ssh sessions by officials of the ARD on clients, and then run the Terminal command.

  -J' used a script like this before restart locked ARD Agents on clients via ssh.  No GUI sessions running on the clients.

  The script Unix in ARD would be similar to:

  for N in 'client1.local' 'client2.local' 'clientn.local '.

  do

  {

  SSH '$N' 'sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password.

  }

  fact

  -The script is run using an adminuser which is available on each client with ssh keys setup (no password) and an entry in/etc/sudoers so the sudo command prompts nor a password.

  -L'adminuser can be activated for this task in a separate script:

  Disable: chsh s operation adminuser

  Administer enable: chsh-s/bin/bash

  hope this helps, dwbrecovery

• IPad mini is not connect to Wifi wireless

  Mini Wireless iPad (iOS 9.3.5) does not connect to the wifi at home but for printer and android phone will be. Have you all on iPad and mydlink router resets.

  Action taken:

  WiFi connected in Apple store - Rep suggested that make a backup and then restore iPad at home.

  Results:

  Can not stop to find my iPad / "check failed: there was an error connecting to server Apple ID.

  Several attempts, the problem persists.

  Looking for suggestions.

  Hi RubyBlu,

  I see you're posting here because your iPad mini Apple Support communities is having problems to connect to your home Wi - Fi network. You talked about since someone at the Apple Store that you said to try to restore your device using iTunes, but you can't not to disable find my iPad to be able to do. I know it's important to be able to connect to the Wi - Fi at home, and I'm happy to help with this.

  As a first step, I recommend take a look on this website and perform these steps in the order, if you have not tried them already:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  If you are still looking to restore your device to factory settings, I'd recommend double-checking to make sure that you have a current backup of first. This is a resource for that if you need a refresher on how to create a back up:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Before you can restore your iPad, you need to follow the instructions here to disable find it my function for your iPad:

  Delete a Mac or iOS device on which you can not disable Find My iPhone

  If you can't disable find my iPhone on the device, turn off the unit so it will Disconnect, then remove of Find My iPhone on iCloud.com.

  Note: You can also delete your iOS device by clearing the first - just follow the instructions below to remove an iOS device, you do not have. You can later restore the device of an iCloud or iTunes backup.

  1. Turn off the device you want to remove.

  2. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  3. Click on all devices, select the device offline, then click on delete account.

     

     If you don't see a delete account, click again on all devices, and then click the Delete button next to the device.

     If the device comes online again, it reappears in find my iPhone. If your device again, turn off find my iPhone on the device (follow the instructions above to remove a device by disabling Find My iPhone), or if it is an iOS device and you no longer, follow the instructions below to remove an iOS device, you no longer have.

  iCloud: remove your device, Find My iPhone

  When you have selected "Delete account", you should be able to restore the device normally using iTunes.

  Take care!