VN7 571 Windows clean install

Similar Questions

• Laptop HP 15-f111dx: 10 windows clean install

  My laptop came originally with 8.1 Windows preinstalled (purchased in 2014). Last year, I did the free update for Windows 10. I also did the original OS HP Recovery disks for the supplied Win 8.1 system with my laptop, and I did the 10 Windows upgrade USB recovery.

  My question: I plan to do a Windows 10 'clean install' because I don't think I necessarily need ALL the pre-installed software HP initially installed on my computer, which of course remained after I did the upgrade to win 10. However, my question is if I do a clean install, I'm aware that NONE of the software original HP and drivers (including the HP Support Assistant who helps with updates software/driver) would be installed.

  I have concerns not to get the updated drivers if I did a clean install.  I assume that there is no possible way to later install SOME of the software that came with my original installation, as the DVD burning software (CyberLink), Foxit Phantom PDF program, etc.

  Can someone shed some light on this topic, especially if you did a clean install of win 10? Thank you.

  Hey there @jrobbie82.

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP's Support and I understand that you are wanting to do a clean install of Windows 10.

  You said "my question: I plan to do a"clean install"Windows 10 as I don't think I necessarily need ALL the preloaded software HP initially installed on my computer, which of course remained after I did the upgrade to win 10. However, my question is if I do a clean install, I am aware that NONE of the drivers (including the HP Support Assistant who helps with software/driver updates) and software original HP would be installed".

  Here's what I found for you. The rest is up to your own discretion:

  Here is a link to the HP Support Assistant.

  This is your page HP for laptop - 15-f111dx (ENERGY STAR) software and driver downloads . You will see that there are 10 for Windows downloads:

  • CyberLink Youcam software
  • Software from CyberLink PhotoDirector
  • CyberLink PowerDirector software
  • Media Player CyberLink Power

  More drivers for:

  • Driver Audio Realtek High definition (HD)
  • AMD graphics driver high definition (HD)
  • Synaptics Touchpad Driver
  • ALPS Touchpad Driver
  • Wireless 802.11b/g/n Realtek RTL8723BE/RTL8188EE LAN drivers
  • Realtek RTL8723BE driver Bluetooth
  • Realtek LAN driver (LAN)
  • Realtek card reader driver
  • Updated HP Notebook System BIOS (AMD processors)

  And Firmware for:

  • The Hitachi hard drive Firmware update

  Here is some information for you to read before hand:

  "To verify that you have an authentic copy of Windows 10 which has not been used on more devices, the license agreement calls for, your 10 Windows must be enabled. Depending on where you purchased your copy of Windows 10, activation occurs using a digital entitlement or a 25-character product key.

  See HP support document Windows 10 Product Activation for more information on activation of Windows 10. »

  Source: installation of Windows 10

  Please read the documentation completely.

  I hope that this has answered your questions and gives you the information that you were looking for. If so, please share it with others by marking the post appropriate as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  Thank you!

  Have a wonderful day!

• stream HP 11 x 360: Touchscreen on stream 11 x 360 does not work after 10 windows clean install

  I did a clean install of windows 10 on my HP 11 x 360 stream, and now the touchscreen does not work. Under system, it says 'no pen or touch input' and there is no driver touch screen not listed under HID in the Device Manager. It worked when windows 8.1 has been installed and it still works in the BIOS. None of what follows has worked previously:

  reset

  several windows updates

  several updates using HP support assistant

  looking through the list of 8.1 windows HP drivers (apparently not all list a touch screen driver)

  looking through the list of drivers for windows 10 HP that was recently added.

  Either by the way, I was about to Flash the BIOS when I noticed that the version on the Web site is f2, and mine is f4. I don't know what that means. I end by flashes, however.

  I remember seeing what I thought, he was a pilot of the touchscreen when you look under programs and features in windows 8.1 before the upgrade. I think it was called magic something or other...

  Microsoft Web site indicate that windows touch support in the oven, so I don't know why it is a problem.

  Update:

  I installed the windows version 8.1 of 'Serial IO driver without connected sleep Support Intel' and he's got the touch screen works, but the accelerometer does not always work.

• played windows clean install, now cant access backed up files or connect to internet

  Installation of my windows system has been altered so windows support sent me a new disk, windows Home premium sp1 to perform a cleanup. I used the windows backup feature to back up all my files on the D drive. Then I did the clean install. But now I can't get the files on the C drive. In addition, argues that this computer has an adapter wireless installed and configured. I'm pretty much call. Help, please.

  problem solved

• Pavilion 15-p206tx: 10 windows clean install

  I update my windows 8.1 to windows 10 via free update. I don't l, t clean install. I installed the graphics driver nvidia Manager recovery and rebooted the system, but the windows didn, t turn on rather displayed a black screen with cursor blinng. Then I clean my pc pre-installed with windows 8.1 on recovery drive. New 10 update is this time I wanted to clean the windows download install with windows 10. This process erases the recovery disc which is a hard drive partion?

  More than likely, the recovery partition will be useless after the upgrade.   Suggest you make a backup image of hard drive using Macrium reflect free on an external hard drive before you do anything whatsoever, not the trial version.

  http://www.Macrium.com/reflectfree.aspx

  There where of compatibility problems reported before you try to upgrade to Windows 10.

  This can help to perform a clean installation:

  http://www.tenforums.com/tutorials/1950-Windows-10-clean-install.html

• How to install xloud and hand vaio gesture after a windows clean install 8?

  can not find the installation files in the sony service. tried the audio driver from realtek high defination but not xloud or dolby home theater surround sound was installed in my Sony VAIO SVE14A15F also. shortcut keys, as help, vaio do not work as they did in windows 7. I'm using a windows 64-bit PRo 8 with media center. pls I want to know where to find the download links... Thanks in advance.

  This model, no SVE14A15F is not detecting. Can u provide the complete model number?

• Games do not work once windows clean install. Also a problem with compressed files.

  After the reinstallation, games (fifa 12, black ops are those I've tried). they display some lack file d3dx9_35 something like dat. Also the compressed files are not extacting... says format d is not taken in charge or something.

  Please let me know if something was wrong with the d resettlement or do I hv to install missing components.
  Thanks for any help provided.

  seems like it was a problem of dx. Works great after a download of dx9. Thanks anyway.

• I'd be able to do a clean install of El Capitan * without * destroy my Windows partition?

  I bought this media 2011 27 "iMac used earlier this year as a refurb from a dealer. It came with El Capitan installed, but I have the feeling that they had a facility upgrade compared to a clean install. The computer suffers from slow start and loading slow program (but once it loads then its fine). It's the same with my old iMac when I did an upgrade to Leopard years ago snow leopard, and erase the disk and performing a clean install OSX (and put files and programs back with Time Machine) has solved these problems then. So I thought it wouldn't hurt to try a clean install on this machine.

  But read the tutorials I noticed that if you are not the first owner of the computer, then you cannot install updates OSX without resetting the computer? Although I WAS able to install the OS via the App Store updates (and I thought that I linked my Apple ID to the machine when I put initially in place), won't install not mean I should be able to clean, or it will have to be completely reset?

  Yes, I've run disk utility and checked my HHD drive, it works fine. The entire machine is nice and quiet, not making abnormal sounds or perform exceptionally, it's just really the slow start in OSX and slow loading programs that are the problem.

  I also recently created a Windows partition and installed Windows 8.1. It starts and runs decently faster than OSX, so I think it's just a problem with OSX and not the HHD himself and do a clean install will be hopefully solve problems. This computer has given me a lot of grief, creating a partition to install Windows 8.1 (unlike my old iMac) so wouldn't really really really have to wipe the HHD together to "change the property" and having to mess with which once again...

  It 'sounds' like since the app store IS letting me install OS and updates to program with my Apple, I SHOULD be able to start in the RecoveryHD Partition and ID here to make a new install of Mac OS x on * just * my existing Mac partition. And this should not erase my * any * HHD, just the Mac partition. I'll save my whole Windows partition just to be safe, however. I could not find a guide which deals specifically with only reset the OSX partition and not wipe out Windows in the process, so I want to make sure I have my facts straight. I had planned on OSX reset and then restore my files with Time Machine. However, I also want to assure you that this will allow me to go even and reset the OS in the first place, given that I am not the original owner of the iMac and I don't know if they reset it correctly.

  Sorry for the extremely long question and TIA!

  Open the Mac App Store, make sure that you are signed in with your Apple ID and click on the purchase tab to see if El Capitan is associated with your Apple ID. If this isn't the case, you will need to download it so it will be associated with your Apple ID. If this is the case, you are all ready.

  Are updates to OS X, not the buyer, so you can install all the updates, but the OS needs to be associated with your Apple ID.

  I'm not sure about Windows, how did you install Windows? With Boot Camp? You should be able to clone on another drive (if you have one) using Clonezilla. Then wipe and reinstall El Capitan and put in place the Boot Camp partition and clone back.

• Windows on Mac - clean install disadvantages and benefits vs Bootcamp?

  Hi people,

  I recently got my first Mac - one Macbook 2016. I tried on El Capitan, and I still much prefer Windows, I'm looking to install on Mac.

  I've read through bootcamp for double installation, but largely, I would prefer to perform a new installation on Windows (I have a copy of Windows 8.1 Pro with a license key). I can't determine whether or not it is recommended and I would appreciate it if someone could clarify it for me.

  My understanding is that: -.

  (1) it is possible to completely remove OSX and have a clean install of Windows.

  (2) OSX (in my case, El Capitan) can be reinstalled at a later date without extra cost (i.e. free) using the OSX installer.

  (3) install or remove Windows OSX will not affect my warranty the warranty is of Apple hardware.

  One of the main concerns seems to be none using Bootcamp means pilots Apple for Windows will not automatically available. I heard some mention that these drivers may actually now be downloaded separately on the Apple site and installed directly on the machine once Windows is in place. Can someone confirm this please?

  Thank you for taking the time to read this. I hope can get definitive information and I can move on Windows soon.

  Welcome to Apple Support communities

  CVoador wrote:

  My understanding is that: -.

  (1) it is possible to completely remove OSX and have a clean install of Windows.

  (2) OSX (in my case, El Capitan) can be reinstalled at a later date without extra cost (i.e. free) using the OSX installer.

  (3) install or remove Windows OSX will not affect my warranty the warranty is of Apple hardware.

  You are right. You can remove OS X and only keep the windows, but it has some disadvantages, to know before doing this. Apart from this, Internet recovery will let you install OS X at any time even if you have deleted the recovery partition, and you will not have to pay for OS x: OS X is free and is already registered for your Apple ID.

  Drivers, Boot Camp Assistant (an application, you can find in/Applications/Utilities) leads you through the first steps before you install Windows on your Mac, and one of them is to download the drivers for your Mac requires and put them in a USB key. However, you may need to OS X to get latest driver versions.

  Instead of completely removing the OS X, I suggest to allocate more space to Windows, but keep OS X in a small partition. By doing this, you will always be able to update the drivers (where you need OS X to do) and you will have fewer problems getting OS X in the future if you want to delete Windows.

  Finally, don't forget to make a backup of your files before you install Windows on your Mac. You may need it in case something goes wrong with the Windows installation.

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Windows 7 Ultimate (64) clean install on HDX9004TX

  A clean install on my HDX9004TX went almost incident free with the following exceptions:

  • Screen of the drafts intermittently for a few seconds and notice advises "Display driver stopped responding and has recovered."
    This happened initially with driver installed by Win7 (has not registered version), then I have updated driver for "ATI mobility radeon HD2600XT v8.632.1.2000 (August 09)" but always with the same result.
  • Cannot locate the driver for orders touch finger in the upper part of the keyboard.

  Hey okz00k,

  Great to see you try the ultimate edition of Windows 7 (64 bit) on the HDX9004TX!

  The quick launch program should be found here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-56178-1 & LC = on & DLC = in & CC = IE & Product = 3463531 & os = 2100 & lang = in

  This should allow you to get your quicklaunch bar work. It would be able to tell me where you have installed the driver of th on your display problem? Was it through the ATI, HP Web site or through Windows Update?

  Also have you tried to do Windows Update to see if there is any updated driver there?

  I would like to know how the Quick launch software.

  Thank you

  Mike

• Pavilion tx2000z clean install windows 7

  Hello

  I had just updated my Tablet PC from Vista Home Premium to Windows 7 Professional so I had to do a clean install. Everything else seems to be fine, but here are some things I'm having a hard time finding answers to:

  -l' screen will not auto rotation, I already updated the drivers for ATI Radeon 3200 (graphics card). If I do it manually through the settings of the graphics, it spins.

  -preloaded programs supplied with the laptop are now gone youcam through cyberlink etc... I was wondering where I can again those re-download? I went on the manufacturers Web site and they want to buy them from me! they came free on my laptop!

  All the tips and the link that you guys can extend is appreciated!

  Thank you

  Hello

  1 graphics card:

  Uninstall your current driver and install the latest driver from the Ati site. There are now some 9.9 Catalyst version avaible for Win7. Information gow install below:

  Download drivers desktop (Catalyst Software Suite) here and click on the card mother/Integrated video drivers , then Full Catalyst Software Suite for your system.

  2. Cyberlink YouCam Version: 2.0.2816 here

  3. you can run Windows Update to get drivers. I recall it y digitizer Wacom driver for Win7 avaible.

  How all the information here.

  4. you can also use Vista drivers. Link reported by user above.

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Issues with Windows 7 clean install

  HP Pavilion dv7-1135nr

  I would like to do a clean install of Windows 7 Ultimate x 64 on my laptop. With the clean install, that I would like to delete the recovery partition and re-create it with the base installation of Windows 7 Ultimate x 64. My recovery partition contains files image/install Window Vista Home Premium x 64 originals and the drivers? My goal is to have a fresh install / clean x 64 and Windows 7 Ultimate partition recovery, as if he had this direct way of HP.

  You wouldn't be able to recreate the recovery to support Windows 7 partition. I would either leave intact or first do the recovery disks, then delete. You may need these if you ever go back to Windows Vista.