restoration of AUTHORITY NT

Similar Questions

• Virtualize 2 DC to create the test environment

  Hi guys,.

  I wonder if someone could help me find a solution.

  I mainly want to improve our main DC - which holds Exchange 2000 (Yes, I know DC should not accommodate exchange roles, but this has been done before coming here)-between Windows 2000 and 2003, and then later this year, I'm going to buy a few new servers and migrate completely (and virtualize!) for 2008 and properly put in place the field.  So before you go ahead and perform the upgrade on our production servers, I thought that I would give to virtualize the domain controller using the VMWare converter. Everything seemed to happen, but when I pulled to the top of the virtual machine (in an environment test, completely isolated from true DC) and ran "adprep /forestprep" he said that he did not because he could not replicate to the schema master role is maintained on our other DC.  No problem, I thought, I'll just do a virtual schema master computer and connect them and everything will be fine.  Of course, then the replication failed between the two virtual machines, because the USN differed so I know now that it is not as simple as that.

  What I want to know is the following: is there anyway I can get my scenario of two DC in a virtual environment to test the updates on WITHOUT cold clone? I'm just saying that I want to do without cold cloning because our main DC took 13 hours to fully virtualize it.  I know I can get round to again the error USN downgrade our second DC and then perform the other steps to do, but I want it to be close as possible DC production simulation and production servers can replicate perfectly, so this step will apply when I do my real upgrade.

  Any thoughts on how / if I can achieve this?

  Thanks for any thoughts.

  Welcome to the forums!

  What a NTBackup of the State of the system and do a restore of authority on a virtual machine?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Problems after restoration

  I just got a 5 s Iphone I restored it from a backup of my Iphone 4 and everything said this worked.

  The phone has all my data but when I stop and start up it goes through Setup all over again

  asking English this and asking where to restore them again.

  Can someone please try to help me?

  Thank you

  To exclude a software problem, have you ever tried to return to factory settings, without using the most recent backup data?

  Your backup can contain damaged data, causing your problems.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If the factory reset does not help, get the phone checked by Apple:

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• How to restore my favorite layout?

  I had the update v29 fast today and found my layout totally broken after the reboot. This "more customizable never" version I can't spend many UI elements that have been previously fully customizable, and other elements are inseparably together.

  I tried the classic complement restaurateur theme, but is not fully restore the ability to customize the interface, and I have been unable to emulate my old layout.

  A screenshot of my favorite layout can help to understand what I'm looking for:
  https://farm8.staticflickr.com/7297/14150900215_f73c613720_o_d.PNG

  If the user interface remained fully customizable, I could live with the space wasted on the screen and the ugly graphics, but in its current state, I can't stand it. The flexible interface was the main reason why I like Firefox, and it seems that it will disappear forever.

  For the moment, I went on the channel of the ESR, but it's only a matter of time before the new user interface is introduced here, too...

  Jens_Lyn_IV wrote:

  https://farm8.staticflickr.com/7297/14150900215_f73c613720_o_d.png
  

  1. Classic restaurateur theme installation and restart Firefox when prompted.
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Beside the classical restaurant theme, click on the Options button.
  4. On the main tab, make sure "Tabs in the title bar" are not checked, and that the 'Mobile back-forward button' and 'hide urlbars stop & reload buttons' is checked. Close the options window when finished.
  5. Right-click on a zone empty of the tab bar and select Customize.
  6. If the title bar is not currently displayed, click the button for the title at the bottom bar left to allow.
  7. Click Show / hide toolbars button and make sure that "Menu bar" is checked.
  8. Make slide downloads, the Back/Forward buttons Stop and reload on the menu bar.
  9. Drag the address bar on the navigation toolbar and menu bar.
  10. Drag all the undesirable elements like the search bar off the bar of navigation and on the range of customization tools.
  11. Click the Customize the output at the bottom right button when finished.
  12. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  13. Beside the classical restaurant theme, click on the Options button.
  14. On the main tab, check "hide navigation bar.

  Note: Classic buttons restaurateur theme may stay dark when it is placed on the menu bar. If Yes, which is a problem, you will need to discuss with the author of the add-on.

  • http://forums.mozillazine.org/viewtopic.php?f=48 & t = 2827985

• I want to restore the situation and modules toolbars to beta 29

  With beta 29 nothing looks right and the Add-ons and status (may be the same) bars have disappeared. There are Add-ons that I can't use any or it's too complicated to use now. There must be a way to solve this terrible mess. I don't understand why Firefox wants to display and behave like the Chrome, in any case. I don't use Chrome for a reason. I hate hamburger icon and the absence again of customizable things. I hope someone can tell me how to restore the add-on bar, I guess what I have called the status bar is actually the add-on bar.

  I may be back to stay 28 and just, there there, if there is no way to do this and firefox wants to be like the chrome (slow, ugly and not very customizable)!

  The most recent version of the author's 2014.04.27.21

  https://addons.Mozilla.org/en-us/Firefox/addon/status-4-EVAR/versions/

  The support thread is at http://forums.mozillazine.org/viewtopic.php?f=48 & t = 2001965

• After update Windows 7, have to reinstall firefox 26, session restore button is available but does not work even if the sessionstore file is there

  I am running Firefox on Windows 7 26. Last Windows necessary to make some updates to safety, the night I closed Firefox I normally do it, use the tab out and let windows to go forward with its updates. This morning I found that Firefox has been removed. I tried to find out that my last night sessionstore.js file still exists and it does. When Firefox came all my tabs have disappeared, also my favorites, modules, etc. I clicked on "restore previous session", but nothing happens. I have a file of last night bookmarks in the bookmarks folder, and the file sessionstore.js is dated last night when I closed Firefox in a normal manner. I'm puzzled. Firefox didn't fail, I closed it as I always do before that I have authorized Microsoft Windows Update and restart. Who am I lack/hurt? I leave this open session so that I can continue to have access to this file sessionstore, as I have it copied in a folder that I use for this kind of disaster. This windows necessary also deleted my MailWasher Pro program update, changed how the Windows Explorer and more 'fun '. Thank you, Microsoft. It is barely possible that I can recreate my tabs and it would be extremely aggravating, but I have no way to re-create all my favorites. I need help.

  Hello
  If you have not closed since the last time that you can type in "subject: sessionrestore ' on the page and there should be a list of tabs from last time. If this consistantly come please see the history on open gint settin settingand

  Firefox > General Options-> view my tabs from last time
  Privacy > history

  Have these options will prevent tabs away, after the browser is closed.

  Please let me know if this does not resolve the question of restoration session being closed. We can help if it is touched by a plug-in by starting the browser in safe mode.

• How to restore the automatic blocking of sites after ' remove all sites?

  Pop-up blocker, I chose 'Delete all sites' and need to restore the block list

  Sorry, Firefox is not a mechanism to back up data to authorized sites. If you have a backup of your profile, the file that contains these data can be replaced by the saved version...

• How can I move bookmarks to new Mac when the synchronization page says "this module has been removed by its author"?

  I tried to move the favorites by creating a synchronization profile, but he gave me the message "add-on has been removed by its author" and I don't know what that means. Within the forum, I found a message stating I can do by the first update for Firefox 9 or something, but my current OS is stuck with the version of Firefox 3.6.26 and will not be upgraded further until I update my OS on my newer computer. So, how can I save and move bookmarks to my new computer, a Mac with 10.6?

  You can restore a JSON backup in bookmarks (library) Manager.

  • Bookmarks > show all bookmarks
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Factory restore

  I recently inherited a MacBook Pro. It runs on Mac OS X Version 10.6.4 Intel Core 17. In my view, that it was made in 2010.

  It will not update the operating system. Otherwise, it works great. I was told to hold the r/control/power button will restore the system, but it did not work. I believe that the factory restore will solve the problem of update, but I don't know how to do this.

  Before purchasing a used computer, you must have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.

  The first thing to do after the acquisition of the computer is to wipe the internal drive and install a new copy of Mac OS X. You - not the original owner, must do. Changes made by Apple over the years have made this very complex seemingly simple task.

  How would you do it depends on the model, and if you already have another Mac. If you are not sure of the model, enter the serial number on this page. Then, find the model on this page to see which version of the OS was initially installed.

  It is dangerous and may be illegal to use a computer with software installed by a previous owner.

  1. If you do not have another Mac

  a. If the machine comes with OS X 10.4 or 10.5, you need a Snow Leopard install disc (OS X 10.6) retail boxed and "Shrink Wrap" on the Apple Store or a reputable dealer - no eBay or something of the sort. If the machine is very old and has less than 1 GB of memory, you need to add in order to install 10.6. Preferably, install as much memory can take, according to the technical specifications.

  (b) if the machine comes with OS X 10.6, you need the installation media that accompanies it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media of the original owner, but if you do not, order replacements from Apple. A disc at retail, or the gray discs of another model, will not work.

  To start from an optical disc or a flash drive, insert it, and then restart the computer and hold the C key to start ringing. Release the button when you see the gray Apple logo on the screen.

  c. If the machine comes with OS X 10.7 or later version, you don't need media. It should start in the mode of Recovery of the Internet when you hold down the key combination option-command-R to start ringing. Release the keys when you see a spinning globe. Note that Mac Pro models turn over end of 2014 (with the box of "cheese grater") cannot use Internet recovery, regardless of what version of OS they shipped with. The Mac Pro round (2014 or later) can use it.

  d. some models 2010-2011 comes with OS X 10.6 and received a firmware update after 10.7 was released, allowing them to use Internet recovery. If you have one of these models, you cannot reinstall 10.6 even from the original media, and recovery of the Internet won't work either without Apple ID of the original owner, in this case, contact Apple technical supportor take the machine to an Apple Retail Store or other authorized service provider to have an operating system installed.

  2. If you do not have another Mac

  If you already have another Mac which has been upgraded in the App Store to the version of Mac OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use the recovery disk wizard to prepare a USB device, and then starts the new Mac of it by pressing the C key to start ringing. Alternatively, if you have a backup of OS X Time Machine 10.7.3 or later on an external hard drive (not a time Capsule or other network device), you can start by holding down the option key and clicking in the row of icons that is displayed. Note that if your other Mac has never updated in the App Store, you can not use this method.

  3 partition and install OS X

  a: If you see a lock screen trying to boot from the support installation or recovery mode, then a firmware password has been defined by the previous owner, or the machine was locked remotely via iCloud. You will need to either contact the owner or by the machine to an Apple Retail Store or other provider of service to be unlocked. May asked you proof of ownership.

  b. launch disk utility, and then select the internal drive icon - no volume icons nested beneath it. In the Partition tab, select the default options: a partition table GUID with the volume of data in Mac OS extended (journaled) format. This permanently deletes all existing data on the disk.

  c. an unusual problem can occur if all the following conditions apply:

  OS X 10.7 or later version has been installed by the previous owner

  The boot volume has been encrypted with FileVault

  You start in recovery mode (that is, not of a 10.6 disk installation)

  In this case, you will not be able to unlock the volume or partition the drive without the FileVault password. Ask for advice or see this discussion of the CSA.

  d. after partitioning, quit disk utility and run the OS X Installer. If you install a version of OS X was acquired from the App Store, you will need the Apple ID and password you used. When the installation is complete, the system reboots automatically in the Migration Wizard, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have all the data to be transferred, it is usually the best time to do it.

  e. run the software update and install all available Apple system updates. To upgrade to a major version of Mac OS X newer than 10.6, get it from the Mac App Store. Note that you can not keep an improved version that was installed by the first owner. He or she cannot legally transfer to you, and without the Apple ID, you will be able to update in a software update or reinstall, if it becomes necessary. Is the same for all App Store products that the previous owner installed, you will need to buy.

  4. other issues

  a. If the original owner "accepted" bundled iLife (iPhoto, iMovie and Garage Band) applications in the App Store so that he or she could put up-to-date, IRREVOCABLY linked to that Apple ID and you can download them without having to buy them. Reportedly, the Mac App Store Customer Service sometimes issued codes of reimbursement for these applications to second owners who asked.

  (b) if the previous owner has not Deauthorize the computer in the iTunes Store under his Apple ID, you will not be able to authorize immediately under your username. In this case, you will have either to wait up to 90 days or contact iTunes Support.

  c. When you try to create a new iCloud account, you could get a failure message: "Account limit reached." Apple imposes a limit of life of three configurations by device iCloud account. Erasure of the unit does not reset the limit. You can always use iCloud account that was created on another device, but you will not be able to create a new. Contact iCloud Support for more information. Configuration limit does not apply to the Apple ID accounts used for other services, such as iTunes and Mac App Store or iMessage. You can create as many accounts you want.

• How to restore Toshiba still WT7 - C16 PDW0EU

  Hello
  I bought a PDW0EU-001001 WT7 - C16 and during the Windows Tablet 10 update firm forlow battery.

  After that she was fully loaded the tablet doesn't does not restart and update asking a support disk, he is arrested.

  I don't have a recovery from the previous 8.1 Windows Media so I decided to download an iso of win 8 creating a startup USB media.
  The procedure "button / stop and volume + button" begins the support of USB, but the first page with the languages, nothing worked because the touchpad gives no answer to my touch of the finger. (maybe it's the problem of drivers?)

  I don't know how to proceed with the installation! Can someone help me with a restore disk toshiba original still WT7 - C or any other tips?
  Thank you

  Sorry for this disorder.

  First of all, you need to get a usb hub (it's cheap), but it will allow you to have 2-3 usb devices at the same time connected to the Tablet - see photo 1. You can also buy a Micro-USB cable adapter USB OTG, since the Tablet has a micro usb port - see photo 2.

  Plug the usb Micro-USB hub adapter cable USB OTG and the cable on the tablet.

  You will also need a micto-SD (32 GB recommended), but I guess you already have that.

  Now connect the Tablet through the hub with the card so you will not work in battery, as well as with a mouse because as you have discovered, the touch pad does not work when you restore the operating system.

  Then, you use your pc and with assistance from the 10 windows media authoring tool, create the image 10 Windows on a USB key. When you are finished, insert 10 Windows USB key into one of the ports free usb hub and start the Tablet into recovery (power + Volume button) mode.

  On the menu, and then using the mouse, chose to load 10 Windows from usb and the process will start automatically. In the case where the installation you will be asked more disk space, choose the SD card and press to continue.

  The process is tedious and you may experience a number of questions, believe me, we've all been there.

  Write back if you need additional assistance.

  Pan BR

• No backup restore

  Recently, I moved from the France to the Germany. I got my I - Phone 5 music, Apps etc for a value of € 250.-(ceux_qui_sont_encore_visibles_dans_I-Tunes-magasin,_bien_que_le_pays_dele_de_magasin_a_changé_depuis_la_ _France_ _vers_ _l'Allemagne_).  During a recent OS update, I made a backup of all the material here on my local computer. It's still there, that the backup has a 29 GB file size. When I restore all my files and applications on the i-Phone (which lasts 4 hours), shows up, but "grey" with "waiting" crushed it. Then, after a few minutes, all miraculously disappears from the i-Phone with a message: "your APPLE ID is only valid for the German I-Tunes store. I'm not sure to be able to understand, why it is not allowed to use purchases paid with a common currency, like a dictionary French / German, an ATV tracker, software remote control for the AR Drone, converter of units of measure, scales, scales, torches, purchased in France, in Germany too. It is the antithesis of the European Community * principle * of common market. I contacted the support 2 times by email, no response. My next step to consider is a formal complaint to the authority for the protection of consumers in the European Union. The overnext is to bring an action.

  As well as to be bound to the account, content, it is also related to the country it was purchased in - content is licensed to Apple to sell on a country by country basis, an item can have a different licensee for different countries.

  A backup of your iTunes purchases (apps, music, movies, etc; or your own music and videos in the applications of music and videos) does not contain a restore iTunes will try to pick them up from this iTunes library. You have not all relevant in this iTunes library, as well as the backup phone that you produce > devices > transfer purchases to copy on the computer and redownloaded the apps (and any other purchase you might once again) of the Bank of France before moving? If the apps are also in the German store, you might be able to re-download them on the store, you can get a message "you already bought it, would you like to download free" when 'buy '. Media (music, movies, etc.) may not be redownloaded in another country, you will have to come back from the backup of your library/downloads you've been track and maintain copy them.

• If I can restore iphone and data sync with iTunes to help uncertified lightning cable?

  Hello guys and girls... I was just curious to know if it is ok if I sync data and restore ios using non certified lightning cable which means I have a Chinese... itunes restores the iphone to ios 9.3.1 perfectly and allows you to synchronize all the music and videos files without saying errors... but is it ok for my iphone? It could damage my iphone or will I get ios works in my camera? My iphone gets too hot during loading and the use of the wifi too... sometimes average 2 times he said cable not taken in charge, but during the restoration and synchronization please help me... im confused... tq for playback

  Hi, I would not recommend using no real cables on Apple devices because they can cause problems. You get also the question of the products not authorized to appear on the screen which can be very annoying and it is because he has not got the necessary cable chip that its not true. The original cable is a little more expensive than the no real but its worth the investment that you don't buy new cables every few weeks. It will work with ITunes and transfer of data, but I wouldn't mind keen charging my iPhone/iPad with a as it is possible that they may cause damage. It's just not worth the risk.

• Sync iPhone with the new HD on Mac after restoring from Time Machine

  I tried this announcement yesterday, but got into a tangle with my iPhone on which I was striking and finished with two fragmentary positions. I apologize and try again.

  My Mac mini hard drive started fail and I'll have a new one (a solid state), actually installed by an authorized service center of Apple. When I get home I'm going to restore the contents of a Time Machine backup.

  My question is this: I sync my Mac with my iPhone via iCloud. For a few days while my Mac mini has been out of action, I had to add some dates to the calendar on my phone. When I restored the content of my Mac HD and I connect to the Internet, synchronization starts automatically. How can I make sure that it is the calendar which is synced phone to Mac and not vice versa?

  It should synchronize icloud to Mac because the update to iCloud is more recent. It would be the same that do not turn on your computer for a few days.

• Need to restore disk for Portege M200 tablet pc

  Dear all,

  I need a copy of the disk original restoration for a Portege M200 Tablet pc.
  Just found out that Toshiba does not sell these disc more. (?!)
  Too old... I'm in trouble!

  Can someone help me please? Anyone got one?

  I tried ebay but without success for me.

  Thanks in advance.

  An owner of desparate M200 in Holland.

  Hello

  This is a really silly situation. I have no such media, but maybe you should contact the nearest authorized service provider. Maybe they have this CD.
  I put t have much experience with the tablet PC, but up to what you expect you should try installing WXP Professional and all offered drivers Toshiba, tools and utilities.

• Time Machine restore failed

  Hi people,

  This dragged on for days now so I need your help to repair what is currently a brick that cost a couple of grand.

  I had my logic board & battery replaced in my mid 2015 MBP 250 GB.

  I'm trying to restore my computer using Time Machine.

  I ran into a number of difficulties.

  First, I tried to restore from the latest backup.

  Estimated to take 8hours.

  He failed.

  I tried again.

  He failed because he now says that the backup has been used by another machine.

  It was mine!

  That solved by restarting my computer and restarting the Airport Extreme, Time Capsule.

  Down to the low bar show my back upwards.

  It failed after only 30 minutes or more.

  I read the fantastic troubleshooting guide, which seems to indicate that the new logic board is time machine it's a new computer.

  I have a problem with that.

  I got my MBP passing an MBA (when I bought it) upward.

  Worked well.

  The work during the night.

  Next maybe useless idea was to get any glitches OSX went with a fresh OSX install and do a restore from time machine after that?

  So, my next attempt was to do a fresh install of OSX El Capitan.

  Until now this process should take 5 days! Seriously!

  I'm afraid to look at tomorrow incase it extends to a month or something!

  What should I do?

  When a card is replaced, unless it is flashed with the old serial number, it is a new machine that is where your problem is.

  If repair has been to an Apple store, resume and get them fixed.

  If this was done at an authorized service center, resume and have them repaired. If they do not, contact Apple.