Vodafone and Optus - IP conflict (error message)

Similar Questions

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  Your help would be greatly appreciated

  Thank you

  original title: network

  Hello GerryBenjamin,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• trying to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.ba

  I try to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.bat.  I don't know what is a mode of administration, nor I know what is a pdfdriver.bat. Can anyone help?

  Hello

  1. what operating system do you use?

  2. what web browser do you use?

  3. have you made changes on your computer?

  4. What is the brand and model of the printer?

  5. are you able to print from other applications?

  When a printer is installed, members of the Administrators group on the computer are given permission to manage the printer by default. If you have an administrator account, you can probably change the printer properties. Otherwise, you must obtain permission to manage the printer before you can change the properties of the printer.

  Method 1:

  If you are using, I suggest you send the link to learn how to open a session as an administrator.

  How can I connect as an administrator?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator

  Method 2:

  I also suggest you to see link and check.

  Error when printing to a PDF file: PDF driver is not found

  http://Quicken.Intuit.com/support/help/error-when-printing-to-a-PDF-file--the-PDF-driver-cannot-be-found/GEN82191.html

  Cannot print from Quicken

  http://Quicken.Intuit.com/support/help/not-able-to-print-from-Quicken/GEN82237.html

• I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

  I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

  Hi BartlettNYC,

  Please see the links below, to solve the problems with Window XP SP3.

  Steps to take before you install Windows XP SP3.

  http://support.Microsoft.com/kb/950717

  How to troubleshoot a windows XP SP3 Installation failure.

  http://support.Microsoft.com/kb/950718

  Good luck.

• Outlook express will not send or receive and givea an Ox800cccof error message

  Outlook express won't send or receive and gives an Ox800cccof error message

  Try to go to file | Identities and upward together a new identity and then add your email account it and see if it works.  If this is the case, then use a file | Import | Messages to bring them from the old identity.  See also www.oehelp.com/OETips.aspx#3 to ensure that you do not have interference with the delivery of your mail anti-virus.

  Steve

• I try to go to the website of tomtom and I get an error message DNS-cannot find server.

  I try to go to the website of tomtom and I get an error message DNS-cannot find server.  I tried the computer desktop and laptop and do not know what the problem is. I thought it was the Web site, but I could put my internet work top. Help, please.

  How your internet connection are connected, if you use Proxy, then try to uncheck bypass for local addresses...

  If you use a direct connection without proxy, even try to open in another browser, firefox IE, if its opening try to update the browser to your desktop computer.

  Thank you & best regards

  Alex k

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.

• I try to install Google Earth and its failure and I get an error message: 0 x 80070002, how can I fix?

  I try to install Google Earth on my Windows Vista Edition home premium and its failure and I get an error message: 0 x 80070002, how can I fix?

  The error message indicates "file not found" - which often means a bad download.

  Try another download of Google Earth - if the operation fails with the error message, then...

  There are a few things you can try to solve this problem: -.

  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type
  CHKDSK C: /R
  and press the Enter key
  We'll tell you that the drive is locked and the CHKDSK runs the next time he started - press Y and restart. The chkdsk command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto) - then run the SFC

  SFC - SFC System - Instructions
  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key
  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Try installation again
   

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.