Volume WMP

Similar Questions

• Level of Volume WMP Audio files

  I want to output volume upgraded WMP files on a flash drive.  They are the same files that appear in my library of music or are these files prior to volume level in WMP?   In other words can I just copy my music library on the flash USB key?

  WMP volume upgraded files do not have their actual volume (or audio) changed. They only contain additional values that are interpreted by WMP when it reads the files.

  If you play the files on the flash drive in WMP, and then they either still leveled volume. However, if you use another player, then it most likely does not recognize (specific WMP) volume of levelling of the values. To get volume upgrade with other players, you probably need to use a third-party tool that does not change the audio data, such as MP3Gain.

• During music playback Volume fluctuates use WMP, Pandora, Real Player.

  I tried to fix a problem with playback of music. Volume constantly changes. As if someone or something turns the volume up and down.

  I tried everything to change or improve power off, power off automatic volume adjustment under the communications tab and just about everything what I found on Windows/Microsoft community and blog sites.

  Nothing helps! I now have Windows 8 and my Windows XP computer has never done this! For some reason, every operating system that Windows has released since XP for it. Vista, Windows 7, and now Windows 8...  Obviously, their must be a problem or a bug within these operating systems that causes this.

  If anyone out there has actually noticed and solved this problem, your knowledge would be worth a lot to me because I listen to music all the time with my computer and I have more 16 000 pieces of music! These aren't the downloads, they are real CD in my library...

  Please, I beg you! Any info would be good, other than what I already tried...

  Thank you

  I finally ended up doing that back the driver for the sound card and that solved the problem!

  Must have been some update that was included with a Windows update that I didn't know...

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• What happened to the toolbar of WMP option in win7?

  With Windows XP and Vista, when you right click on the toolbar, you can select (check) "toolbars-> Windows Media Player".  This allows to minimize the WMP and then it appears in the taskbar with [Stop |] Previous | Play | Next | Volume].  What happened to this option in Win7? How can I do the same in Win7?

  Thanks in advance...

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  resembles WMP12 (Windows 7) no longer has this feature and the only way to recover is to go down to WMP11, which I plan to do as I also found soundspectrum.com Whitecap does not at all with WMP12...

  Here is more information on how to get back to WMP11 (Vista version) on Windows 7...

  http://www.askvg.com/how-to-get-Windows-Media-Player-WMP-taskbar-toolbar-back-in-Windows-7/

  Seems it was to listen to many Windows users among a few other features that WMP11 had is no longer available in WMP12.

  

  Message edited by JimT on 04/09/2009 08:16

• Re: Qosmio F60 - how to make the volume buttons to only work with Media Player?

  Hello.

  I was wondering if I could make the Volume up and Volume down button keys compatible with my AIMP3 Media Player software.

  I tried to press on them, only to realize the right controls the overall volume of Windows.
  I tried the assignment of the keys to the keyboard shortcut list in the software. But he continued to play with the volume of Windows.

  No idea how to fix this to make it work with my Player volume only?

  My OS is Windows 7 64 bit

  Thanks in advance.

  > No idea how to fix this to make it work with my Player volume only?
  AFAIK you cannot fix it. These buttons are for the Windows level volume only.
  But I don't see why it is so important. Set the volume level in WMP to the maximum level and simply change the level of Windows. In General, the result is the same. Or not?

• Low volume on playback of DVD on the Qosmio G40-10 s

  Hi all

  Just address my new G40 10 s - one single machine hell! On playing a DVD through WMP or HD Toshiba player the playback volume is not so great when the ramp up to the max...

  Anyone know if there is a way to overridding the settings and get more volume? MP3 playback is fine and has punch, its just DVD that are the problem.

  Any help would be appreciated.

  Thank you very much

  Hello

  Eventually, you pay the wav volume control or readers to a higher level.
  This should be possible in the sound properties located in the control panel.

  Select this check box.

• my sound works fine except when I play a video. When I click on the volume, then mix it bumps on speakers and system sounds, but not when you set windows media player

  When I imported my videos from my phone and then began to look at there was no noise. I clicked on the volume, and mix. adjusting the volume on the speakers and his system, it's a ding, but when I have not adjusted the volume on windows support no ding. It is not cut.

  Hello

  What version of Windows are you using?

  This is by design, when you try to adjust the bar its windows media player or WMP or the volume mixer you will not hear the sound of ding.

• Increase the volume of the files to burn to CD?

  I have an mp3 file that I need to burn it to a CD using Media Player, but there was a problem with the recording level and who speaks can hardly be heard with the completely mounted volume on my speakers and multimedia player.  It of better when I play with the SRS WOW effects, but is it possible to add these effects or to increase the volume of this file, when I burn it to the CD is strongest when played?

  CatherineS

  No, Audacity is definitely the way forward as its a million times better than WMP audio editing. Work a little more maybe, but well worth it.

  You can add effects with Audacity, VST and other.

  In WMP you can normalize the volume when burning (Options > burn > you will see the option on this tab).

  Personally I would not trust him, I use Goldwave and sometimes daring.

  See you soon,.

  Jerry

• Unable to add music files to WMP 11 rocket?

  When I try to add my music files to 'Add to library' in WMP 11, I get this message "the my 8G\Internal folder to Fuze Memory\Music ' is not found. It can be located on an unavailable volume or protected with a password. Change the folder and try again.

  I am at a loss to what it means or how to put my music in WMP without all my CDs load again. I have my USB on Auto settings. I just got my Sansa yesterday so I'm new on this... Any suggestion would be appreciated... Thank you... CG

  I figured it out... thank you for your help...

• the laptop volume is low

  volume...

  Hello...

  Hoping you can help...
  I have an Acerr laptop, Aspire 5738Z and the volume is not terrible on it, is this standard with this model or is there something I can do to adjust / sort it... Have you looked at the volume mixer and evn at full capacity, it is still low...?
  Thanks in advance for anyone reading this and willing to help...
  Simon

  Hi, TR-79,

  Acer - voice volume to low during DVD playback

  During playback of DVDs in Acer Arcade, the audio output for the voice is quite low, yet the other noises are at normal volume.

  1. Start the computer, allowing the computer to boot completely.
  2. Left-click on the "Start" icon in the lower left corner of your screen.
  3. Left click on the "Control Panel", this will open the Control Panel window.
  4. Left window double click "Sound effect Manager" icon, this will open the AC97 Audio Configuration. "
  5. The "Sound Effect" tab (window opens to this tab) in the section titled "karaoke" remove the green check mark in box "voice cancellation".
  6. Close all open windows.

  Reboot-Arcade and Play movie, sound levels voices should now be closer to other sounds on the audio track of the film.

  http://support.Acer.com/acerpanam/notebook/0000/Acer/Aspire3000/Aspire3000faq9.shtml

  Check the settings of volume on all of the media players you have installed - iTunes, WMP, etc...

  Check Control Panel > Volume > Speakers > Speaker properties

  Check the Equalization of the Volume

  Open Device Manager and look for problems with the sound card drivers - uninstall the drivers, reboot to reinstall

  Go to the sound card manufacturer's website and search for driver updates

  How to fix the Volume low on Ace laptop

  http://www.ehow.com/how_6658398_fix-low-volume-Acer-laptop.html

• Volume is not loud enough in Pandora

  I am under W7 and IE9 on a desktop PC.  I spend a lot of time listening to Pandora while I work, but the volume is never high enough since I'm hard of hearing.  I tried tweaking all the volume controls, that I could find, without success.  I've seen instructions on how to use Visual Basic to waste his time with volume, but I'm really not up to that.  Are there any other information you need (sound card, version WMP, whatever) to advise me how to increase the volume?

  I am under W7 and IE9 on a desktop PC.  I spend a lot of time listening to Pandora while I work, but the volume is never high enough since I'm hard of hearing.  I tried tweaking all the volume controls, that I could find, without success.  I've seen instructions on how to use Visual Basic to waste his time with volume, but I'm really not up to that.  Are there any other information you need (sound card, version WMP, whatever) to advise me how to increase the volume?

  Hello

  I also suffer from hearing loss, and it's always a difficult question to answer.

  The most obvious answer is to increase the volume, however, just increase the volume may also adversely affect the hearing still further.

  I recommend that you consult a professional local Audiology for advice. The most recent digital hearing aids have the ability to help by filtering more harmful frequencies without loss of quality.

  Concerning

• Fluctuation of Volume for Media Player

  I came at the end of my intelligence with volume of Media Player fluctuating from top down during playback.  It is a long-standing problem plaguing my systems since the days XP and persists through Vista and now seven.  I have built at least 5 personal pieces I remember the problem arise, which have completely different hardware configurations and speaker configurations.  ECS, Asus, Abit cards mothers, processors AMD and Intel, Harman-Kardon, Boston Acoustics and Altec-Lansing speakers, stereo systems, 5.1 and 7.1...

  When playing music or video from a file, the wah-wahs of volume up and down throughout the song and ONLY using WMP.  iTunes, Winamp and online streaming are all perfect.  Equalization of the volume does not help, in fact I can't even switch to silent mode does not help.  I have installed ANY additional codecs, I got in trouble with those in the past, so I stay away from 3rd party codec packs.  Please help me, it's a royal pain to keep the selection of alternative music players at the opening of the mp3 or video files, and I prefer Media Player for alternatives.

  Thank you!

  Ken C

  Hi Lottoman,

  Method 1

  To disable improvements audio speaker

  (a) Sound open by clicking theStart button, and then clickPanel. In the search box, type sound, and then clicksound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  If you do not see the tab improvements in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  Method 2

  If the previous step fails then try the step below and check out them.

  (a) go to the sound icon in the system tray, bar right click, clicksound

  (b) click the Communications tab. On this one, you will see:

  Windows can automatically adjust the volume of the different sounds when you use your PC to place or receive calls.

  When Windows detects the activity of communication:

  1. cut all the other sounds o reduce the volume of other sounds of 80%

  2 reduce the volume of other sounds by 50%

  3. do nothing

  (c) select 'do nothing', so try and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player volume control does not work during DVD playback.

  When I play a DVD in Windows Media Player or Windows Media Center I can't adjust the volume with the volume control of the program or main Windows volume control.  Simply sound 100% flight.  It's on a HTPC connected to an A / V recevier, so the only way to adjust the sound with the volume of the receiver control.  When I play any other type of multimedia (avi, mp3, etc.) in the two WMP or WMC in the program volume control is working properly.  The interesting part is, when I play a DVD using VLC Player or Cyberlink Power DVD the volume setting in the program as well as the main Windows volume control works correctly.  This leads me to believe it's a software is not a hardware problem.  I think that WMP and WMC using the same "engine" so the same problem knocking them both.

  Other info:

  Windows 7 64-bit.

  Windows Media Player 12 version

  Audio is routed to the receiver via the digital coaxial

  For what it's worth, this same problem occurred with the same exact material when I'm running Vista 32 bit.

  All other software is the latest version with all updates installed.

  Any ideas are welcomed and appreciated.  Thank you in advance.

  -Michael P.

  Hello

  Reinstall the WMP and WMC application and see if it works very well.

  1. open the Control Panel -> programs and features.

  2. click on Windows to enable or disable features in the left pane.

  3 expand the multimedia features, disable Windows Media Player. Click Yes to continue, and then click OK to exit. Then restart.

  Note: If you turn off your WMP, Windows Media Center will be off either. You may need to reconfigure the settings for Windows Media Center after her reactivation.

  4. open or turn off Windows features turn on again. Functionality in Windows Media Player and Windows Media Center. Turn it back on.

  5. launch Windows Media Player, initialize the program.

  PS: If you turn off your WMP, Windows Media Center will be off either. This does not happen when we choose to turn off MCE.

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Beats Audio Volume indicator WENT after IDT HD Audio update!

  Just bought the HP Envy 17 t-3000 (Envy 17 model custom) and I updated all drivers through HP Support Manager.

  BEFORE the update, the Beats Audio worked fine...

  1. press on the knob and the popup box appears about 3 seconds

  2 whirlwind indicator volume seems to display the volume level.

  AFTER the update, something changed the Beats Audio... had to re - install the latest driver from the HP Web site (even after the contact with HP Tech support chat and email several times)...

  1. press on the knob and the popup box appears about 10-12 seconds now!

  2 whirlwind indicator volume DISAPPEARED for volume level indicator is GONE

  Of course the sound works but NOW I do NOT know or remember the volume level whenever I listen to music.

  You can barely tell on the speaker icon to Windows on the toolbar since 2 sound waves indicate at least 50% of its level, but that's all!

  I have the software following and checked their settings and put everything to 50% and use the Beats Audio dial to control the volume when the programs are used:

  1 WinAmp

  2 VLC player

  3 MPC

  4 WMP

  No matter what I try, it appears that the Beats Audio Volume Control indicator Swirl is GONE! Worse still, there is NO Windows switch order volume at least don't let the open Volume mixer!

  Someone knows how to solve this problem and bring back the Audio Beats volume indicator?

  HP Tech support insists on doing a re clean - install of the operating system to its original state after suggesting to do reinstall partial of restore points. Already tried restore but points only some since there were MANY because of various updates and none brought the Volume indicator.

  Perform a total OS re - install would be the LAST attempt given I have to reinstall all the programs and updated ONCE again that would be laborious!

  Thank you!

  Hello

  Without knowing exactly which updates HP Support Assistant is installed, try the following first and let me know.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Then, download and install HP display to the screen from following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Once again, when the installation is complete, restart the laptop.

  What is now working properly and what is not, or is there no change?

  Kind regards

  DP - K