Vostro 5470 - two finger tap does not work

Similar Questions

• Y500 two-finger-tap touchpad not working not

  Hi I bought my Y500 a few happy days with her and there are in general. However, one day the two le deux-doigt-tap (par clic droit) sur le pave tactile - finger - tap (by right-clicking) on the touchpad stopped working. Here is a description.

  Everything else as far as I know, including the two fingers scrolling and the tap of a finger, etc. work well, but the tap two fingers stopped working even though it worked fine for a few days. I have a suspicious as to what caused it, but I'm not entirely sure. In any case, I think that it is probably a bug and probably software. One day I went into 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->"Scrolling"->"two fingers to scroll"->"enable cabotage. I played with the cabotage for awhile and soon off again because I don't really like it. However, that's when I noticed that my tap two fingers stopped working. I have double checked that 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->" by clicking on "->" click two fingers "is set on" secondary click (context menu, drag special) ", but the click two fingers still doesn't work, even after a reboot. I downloaded the latest driver (version 16.2.18.0) and it still doesn't work. I uninstalled the driver and installed it again and it still does not work. Now, I like to use the touchpad, but really hate to live without tap with two fingers for a right-click. Please help me with this, I thank you in anticipation.

  It seems to me a solution, but I don't know exactly why he has solved the problem. It seems that the problem might be that while the Synaptics touchpad device is a PS/2 device, it keeps software interference (of some sort) by being recognized as a SMB (System management bus) device. Which solved the problem for me was to go to 'device manager'-> 'system devices', locate "Synaptics SMB driver", and either disable it or remove it. The two-finger-tap touchpad must begin to work immediately.

• Two finger scroll does not work on the new MacBook

  Did I miss something? Hold scroll a window or a list using trackpad and not the scroll bar lift - but it does not work as advertised.

  The this MacBook, literally 'new', i.e. bought Apple in the last week or two? You have installed third-party extensions that could affect the mouse/trackpad settings?

  C.

• Satellite C50 - B - 14 d - two finger scroll does not work

  I've had my laptop for about 6 months now and I am generally happy with it. However, the two fingers scrolling has stopped working (it was working fine when I got it and for some time after). I know that it is not essential, but it made such a difference to the work that I end up having to do, implying often copy and pasting etc, and really miss me!

  I've read many threads saying that you should go in Control Panel, click the mouse and go to device settings. However when I get to this point, my box of mouse says just "buttons; pointers; pointer options; material"and there is no sign 'Device settings' along the top. What can I do? I also can't find the synaptics driver anywhere to uninstall, as others have suggested.

  Can you please put name of full model of your laptop to check the Toshiba download page and try to find the right touchpad driver.

• C50-A0121 satellite: my tape does not work in libraries

  Hello

  Please, you can try help me...

  In libraries that my tape does not work, the layout allow me to make changes, the right click does not work when I want to select one of the options

  I know that may sound blonde for a GAL to ask but PLEASE help

  Thank you

  Yve

  Sorry, but your message and the problem is not quite understandable.

  Could you please post the laptop model and the system you are using?
  Please explain exactly (very detailed) what's the matter with your laptop!

• Synaptics touchpad two fingers scrolling does not work in the player to develop modern UI application Windows 8.1

  I have a HP Envy TouchSmart UltraBook 4-1161er. Two fingers to scroll worked well in all modern user interface applications that come with the pre-installed operating system Windows 8.1, but the situation changed after the upgrade to Windows 8.1. Now this excellent and very useful two fingers scrolling does not work in the updated reader application. How to make it work?

  If the problem is in the drivers, maybe, install the drivers the latest may correct this?

  I tried to find the latest drivers for the touchpad Synptics in my ultrabook on the HP website, but it's the same old v16.5.3.3, I already have (published in may 2013). Synatics official site contains a link to the latest touchpad driver pack v17.0.19. Can I install it?

  I would try to install the Windows 8.1 (64-bit) driver Synaptics touchpad available in the download section of your sleekbook web support before using compatibility mode.  If the current driver does not work for you, try the earlier versions available .

  If you have no positive results, then use the compatibility mode (select Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most recent.

  To use compatibility mode to install the driver just softpaq to the right, click on the file and choose troubleshoot compatibility. Select Windows 8 and run the installer.

  The following video has a decent explanation, but the Narrator does not get to the point for a bit. Go directly to the minute 4 and watch it from there.

• Finger scanner does not work

  Hello.

  My scanner on my HP Envy 17 finger - laptop Whatever has worked since I got it, but this morning, something went wrong. Any finger I scan, he always tells me that the fingerprint was not found in the database. I tried to open the program that comes with the fingerscanner thing to reset the settings and try to put a finger in the database again, but it still does not work. It is said that my finger has been added correctly and that I can now use it to connect, but every time I try to connect it says always the same "the fingerprint is not found in the database" - something like that.

  What can I do?

  Kind regards

  Me

  Hi there @12344321broken.

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the scanner on your laptop computer finger printing does not work correctly. You mentioned you tried to solve the problems already adding new fingerprints, but that they still do not work.

  Have you tried to update the driver in Device Manager? If this isn't the case, please follow these steps:

  • Open the Device Manager
  • Search for biometric devices
  • Under biometric devices, look for the device (called Validity Sensor sensor AuthenTec)
  • Right-click on the fingerprint sensor
  • Click on set to update driver
  • Restart your computer.

  If this does not work, make sure that you delete the old footprints in SimplePass and sign new. Please go to:

  • Control Panel
  • Programs
  • HP SimplePass
  • Scroll down to register fingerprints
  • Click and enter your fingerprints.

  If this does not help, I would say uninstall fingerprint driver and reinstall the updated release of the pilot.

  • Open the Device Manager
  • Search for biometric devices
  • Under biometric devices, look for the device (called Validity Sensor sensor AuthenTec)
  • Right-click on the fingerprint sensor
  • Click on uninstall
  • Restart your computer.

  Have you tried to upgrade HP SimplePass?

  Have you tried to do Windows updates?

  You tired to clean the fingerprint reader?

  Have you tried to use the reader of fingerprints in Mode safe?

  Have you done something new lately? Downloaded new software?

  There is a document called Troubleshooting a fingerprint reader. There are a few troubleshooting steps that may help you including those above. If the steps above has not fixed the problem you are having with your fingerprint reader, please try to follow the steps outlined in the document in the order.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution". This will allow to the others is that present the same problem a solution also.

  If you need assistance, I would be more than happy to continue to help you. If please re-post with the troubleshooting results and could you please include your model number (How can I find my model number or product number?).

  Have a great day!

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Touchpad not working not - corner double tap does not work - no yellow light

  I have a Folio 9470 m.

  My touchpad does not work.

  The tip of the double tap does not work.

  The yellow light is not on.

  Someone at - it help him?

  Press the power button and then immediately press the ESC key to call the start menu.

  In the boot menu, press the F2 key to enter the PC Diagnostics.

  Select the component tests , then the mouse. Run the test. If she passes the test then the touchpad is fine and all that should be required is reinstall the driver for the touchpad. You can download the software from your support of the ultrabook Portal in the download section. Download and install the appropriate version of the operating system.

  If the led on the touchpad of orange does not illuminate, the touchpad is enabled. Amber led on the means, the touchpad is disabled, disabled.

• Three history of finger cursor does not work

  I use an Air of IPad.  The history of 3-finger gesture does not work.  Someone at - it solution.  Gestures of multitasking is disabled.  I've tried everything.

  Understand how to operate, do not keep the fingers closed together but apart.  Works now.  Thank you, Steve

  Sent from my iPad

• 4 finger swipe does not work under macOS Sierra!

  Hey all, I upgraded to macOS Sierra and noticed that one of my function used more regularly on Mac OS, 4 finger swipe to switch between desktop computers does not work! Mine is an April 2011 MacBook Pro.

  Earlier, 2 fingers sliding back in the files, similar to switching back and forward for the Web pages in Safari, has been abandoned without reason penetrable. I hope that's not the same fate for 4 finger swipe to switch between desktops.

  I probably use hundreds of times every day for switching between desktop computers because I have safari, MS Word and open the mail outside of iTunes on separate workstations. I hope that a fix is released soon!

  Apple, do not bite of useful outdoors features!

  Ravi Reddy

  4 finger swipe works for me and appears as the 2nd part of the Trackpad Control Panel.

• Firefox 8 on Windows 7 (64) Synaptics touchpad gesture with two fingers scrolling does not work. Works in any other program.

  UI.trackpoint_hack. Enabled = 1 does not help. All the Plugins and drivers (Synaptics) up to date. Samsung 900x3a. Slider modifies the icon when running two finger gesture but not scroll. No PDF not loaded. No other open tab. When you load in the tab PDF PDF scrolls with the gesture. Same problem in Thunderbird 8. Reason to use Chrome as standard browser.

  I solved this problem with this registry setting:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh]
  "UseScrollCursor" = DWORD: 00000000

  You could do it faster with by downloading and running this file: ScollingFix.reg (watch out, click on the link just! there are ads)

  IT disables the small view icon on the cursor. Bad driver from Synaptics...

• MY ION TO TAPE DOES NOT WORK ON MY LAPTOP INTEL

  The audio conversion software installation disc doesn't seem to work and I can not install the ez vinyl/tape converter.

  Hello

  Method 1

  You can take the help of the mentioned link to install ez vinyl/tape converter, see this linkhttp://www.ionaudio.com/ezvc

   

  Method 2

  As you mentioned that the installation disc does not work please try to run this disc on another computer, if it works, it means it the hard drive does not work properly or if it does not work on the other computer too, it means that the drive can get damaged. You can also try to run any other disc and control whether or not this drive works fine.

  I suggest you to contact the manufacturer for any other ability to install the drive.

  All that be status please let us know.

  Thank you and best regards.

• A two-way binding does not work

  Hello!
  Maybe I did something wrong, but the link two-way thic simple code does not work correctly.

  package simple;
  
  import javafx.application.Application;
  import javafx.scene.GroupBuilder;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.control.CheckBox;
  import javafx.scene.control.CheckBoxBuilder;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  public class BiDiBug extends Application {
    
    CheckBox checkBoxResizable;
   
    public static void main(String[] args) {
      Application.launch(args);
    }
    
    @Override
    public void start(Stage stage) {
    
       stage.setResizable(true);
         
      Scene scene  = SceneBuilder.create()
        .width(200)
        .height(100)
        .fill(Color.TRANSPARENT)
        .root(
          GroupBuilder.create()
               .children(
                  checkBoxResizable = CheckBoxBuilder.create()
                    .selected(stage.isResizable())
                    .text("Is Stage resizable")
                    .build()
                  
                )
                .build()
            )
         .build();
      
      checkBoxResizable.selectedProperty()
              .bindBidirectional(stage.resizableProperty());
      
      // This code not works too:
      
      //stage.resizableProperty()
      //          .bindBidirectional(checkBoxResizable.selectedProperty());
      
      stage.setScene(scene);
      stage.show();
    }
  }

  Is it bug or feature?

  I do not understand your two-way binding.
  You can control the resizing scene using the checkbox.
  How are you trying to change the box through the resize property?
  You can attach a listener to the box to resize the stage.

  import javafx.application.Application;
  import javafx.beans.value.ChangeListener;
  import javafx.beans.value.ObservableValue;
  import javafx.scene.Group;
  import javafx.scene.GroupBuilder;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.control.CheckBox;
  import javafx.scene.control.CheckBoxBuilder;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  public class BiDiBug extends Application {
  
      CheckBox checkBoxResizable;
  
      public static void main(String[] args) {
          Application.launch(args);
      }
  
      @Override
      public void start(final Stage stage) {
  
          //stage.setResizable(true);
  
          Group root = new Group();
  
          Scene scene = SceneBuilder.create()
                  .width(200)
                  .height(100)
                  .fill(Color.TRANSPARENT)
                  .root(
                  GroupBuilder.create()
                  .children(
                  checkBoxResizable = CheckBoxBuilder.create()
                  .selected(stage.isResizable())
                  .text("Is Stage resizable")
                  .build())
                  .build())
                  .build();
  
          checkBoxResizable.selectedProperty().addListener(new ChangeListener() {
              public void changed(ObservableValue observable, Boolean oldValue, Boolean newValue) {
  
                  stage.setResizable(checkBoxResizable.selectedProperty().get());
  
              }
          });
  
          stage.setScene(scene);
          stage.show();
  
      }
  }
  

• What happens if the iCloud taps does not work on iMac?

  What should I do if the iCloud taps don't work on iMac? My iMac does not show the browsers of my MBP, iPhone or iPad (and vice versa). I tried to unplug the iMac and notation on my account iCloud again. Thank you.

  You provide the version OS X iMac is running.

  GB